Visual cafe 4.0 EE and WLS 5.1

Hi ,
Has anyone successfully integerated visualcafe 4 enterprise editon
and WLS 5.1 on win2k ? Any info would be highly appreciated !
cheers
Amjad

Similar Messages

WL 5.1 and Visual Cafe 3.1

We are evaluating WL 5.1, and purchased a copy of Visual Cafe 3.1 Enterprise
with hopes of setting up a development environment for simplified deployment
of EJBs to the WL server. Has anyone had success in setting this
environment up?
It seems that Cafe wants WL to be installed on the same machine. Is this
true? Out of the box, using the wizard to create a new WL EJB does not work
as it appears to be looking for WL classes that don't exist.
The BEA web page only shows support for 4.5.1. Is 5.1 officially supported
via front end tools?

Tony,
As Nirav mentioned, VCafe 3.1.a does not support WLS 5.1. WLS 5.1 shipped well after VCafe 3.1a.
You will need VCafe 4.0, currently under development, in order to deploy or configure EJBs for WLS
5.1.0.
-dana
Tony Bailey wrote:
Nirav,
We have done a full reinstall of the product suite. My workstation now has
WL 5.1 and Cafe 3.1a (patched). Using the project wizard I chose to create
a new EJB for WebLogic. When choosing to configure the deployment
descriptor, the build succeeds, but we get these errors:
Visual Cafe (08:58:28): Build Successful
Internal VM (08:58:29): Trying to load from
XML...java.lang.NoClassDefFoundError: weblogic/ejb/utils/ui/fromXML
Internal VM (08:58:29): java.lang.NoClassDefFoundError:
weblogic/ejb/utils/ui/fromXML
Are we not going to be able to deploy via Cafe?
"Nirav Chanchani" <[email protected]> wrote in message
news:[email protected]...
Tony,
First of all, you should download the patch 3.1a from the WebGain website
(http://www.webgain.com/Download/index.htm). VisualCafe 3.1a is certified
to
work with WLS 4.5.1 only.
Although you will need to install WLS on the same machine as VisualCafe tobe
able to build EJB projects, the EJB's can be deployed on a remote machine
running WLS.
WLS 5.1 support is slated for the next release of VisualCafe EnterpriseEdition
4.0. Another product that helps with EJB programming is StructureBuilder,also
available from WebGain. (See http://www.webgain.com for details).
Nirav.
Tony Bailey wrote:
We are evaluating WL 5.1, and purchased a copy of Visual Cafe 3.1
Enterprise
with hopes of setting up a development environment for simplifieddeployment
of EJBs to the WL server. Has anyone had success in setting this
environment up?
It seems that Cafe wants WL to be installed on the same machine. Isthis
true? Out of the box, using the wizard to create a new WL EJB does notwork
as it appears to be looking for WL classes that don't exist.
The BEA web page only shows support for 4.5.1. Is 5.1 officiallysupported
via front end tools?--
Nirav Chanchani
BEA Systems, Inc.

WebLogic service packs and Visual Cafe

I installed Service Pack 6 for WebLogic. I used "wlconfig" to update the registry, and I also changed the "startWebLogic.cmd" batch file in the WebLogic home directory. However, when I start the server from VisualCafe it does not use SP6. It appears that Visual Cafe has it's own way of launching the WebLogic server. Anyone have any idea how Visual Cafe does this and what I have to change so it will use SP6?
Thanks,
Dave
[email protected]

I installed Service Pack 6 for WebLogic. I used "wlconfig" to update the registry, and I also changed the "startWebLogic.cmd" batch file in the WebLogic home directory. However, when I start the server from VisualCafe it does not use SP6. It appears that Visual Cafe has it's own way of launching the WebLogic server. Anyone have any idea how Visual Cafe does this and what I have to change so it will use SP6?
Thanks,
Dave
[email protected]

Weblogic 4.5 and Visual Cafe 3.1

Hi,
I am having a problem integrating Visual Cafe with Weblogic.
Specifically, it involves getting the Weblogic classpath modified to support
setting up a connection pool to an Informix database. If I start the
Weblogic server manually, I can set the server classpath appropriately to
find the Informix JDBC driver and my pool is setup properly.
However with VC, it starts the Weblogic server from the IDE and I have
not been able to get the addition classpath entries to find the Informix
driver. Is there a way to add additional classpath entries so that when VC
starts Weblogic it will find my JDBC driver? Or do I have to start the
Weblogic server seperately and setup remote debugging manually?
Thanks
Carl

Yes, I am using the symantec debug VM. This is the batch file I use to start WL.
echo %CLASSPATH%
set
CLASSPATH=.;c:\VisualCafe\JAVA\LIB;c:\VisualCafe\JAVA\LIB\SYMCLASS.ZIP;c:\VisualCafe\JAVA\LIB\CLASSES.ZIP;c:\VisualCafe\bin\components\sfc.jar;c:\weblogic\license;%CLASSPATH%
set PATH=c:\winnt\system32;c:\winnt;c:\VisualCafe\Java\bin;c:\weblogic\bin
set
JAVACLASSPATH=%CLASSPATH%;.\classes\boot;.\eval\cloudscape\lib\cloudscape.jar
set
WEBLOGICCLASSPATH=.\classes;.\license;.\lib\weblogicaux.jar;c:\code\VisualCafe\Version1
rem java -ms32m -mx32m -classpath %JAVACLASSPATH%
-Dweblogic.class.path=%WEBLOGICCLASSPATH% -Djava.security.manager
-Djava.security.policy==weblogic.policy weblogic.Server
c:\VisualCafe\java\bin\debugvm -ms32m -mx32m -classpath %JAVACLASSPATH%
-Dweblogic.class.path=%WEBLOGICCLASSPATH% -Djava.security.manager
-Djava.security.policy==weblogic.policy weblogic.Server
If you don'y use the symantec debug VM, it stands to reason that the debug
environment will not see your process in the VM. I can't help you with why your
WL crashes when you connect using the debug VM. Perhaps you could post some more
information?
-- Jay
Tamilselvan Ramasamy wrote:
Hey,
help please
You said that you can attach from VC 3.1 to weblogic server 4.5.1 right. How
did you start the server ? Is it using the symantic debugvm.exe and symantic
settings? If I start the server with javasoft java.exe then VC is not seeing
the vm at all. And I tried starting weblogic server using symantic
debugvm.exe, as soon as a client trying to connect then the server crashes.
Please post the some instruction how did you do that?
Thanks
/selvan
Jay Baker <[email protected]> wrote in message
news:[email protected]...
The latter has been successful with me. I start the WL server manually viaa
command prompt and then 'attach to process'.
-- Jay
Carl Phillips wrote:
Hi,
I am having a problem integrating Visual Cafe with Weblogic.
Specifically, it involves getting the Weblogic classpath modified to
support
setting up a connection pool to an Informix database. If I start the
Weblogic server manually, I can set the server classpath appropriatelyto
find the Informix JDBC driver and my pool is setup properly.
However with VC, it starts the Weblogic server from the IDE and Ihave
not been able to get the addition classpath entries to find the Informix
driver. Is there a way to add additional classpath entries so that whenVC
starts Weblogic it will find my JDBC driver? Or do I have to start the
Weblogic server seperately and setup remote debugging manually?
Thanks
Carl

Where can i download the Jbuilder and Visual Cafe

i m using window me, where can i download the Jbuilder and Visual Cafe. hope somebody can help. thanks.

The webpage is www.visualcafe.com , but it will only show you that the product is no longer supported. Used to be a nice product :-(

Visual Cafe and Oracle thin driver

I have created a java applet using visual cafe and oracle think
driver. The applet connects to database within the visual cafe
environment. If I try launching applet locally within a browser
I get the following error "Error:securit. Couldn't connect to
'host' within origin from 'local_classpath_classes" Any help is
greatly appreciated.
THanks
John Famolaro
null

John
I also had this problem. Its a general security problem.
Because your trying to connect to another machine, you
must sign your applet to get full security privelages from
within your browser. The sandbox within the JVM of the browser
doesn't let you open connections to other machines.
(Although my original understanding was that if the applet
was stored locally, then you had full privelages - but it
didn't work like this for me.)
Try signing your applet.
steve
John Famolaro (guest) wrote:
: I have created a java applet using visual cafe and oracle think
: driver. The applet connects to database within the visual cafe
: environment. If I try launching applet locally within a
browser
: I get the following error "Error:securit. Couldn't connect to
: 'host' within origin from 'local_classpath_classes" Any help
is
: greatly appreciated.
: THanks
: John Famolaro
null

Tuxedo Service EJBs and Visual Cafe

Anyone know how configure the weblogic.wtc.jatmi.TuxedoServiceHome and
weblogic.wtc.jatmi.TuxedoService classes for a new Service EJB in Visual
Cafe?
The classes are not listed in the Configure Enterprise Bean drop down list,
and if I enter the class names, VC wants to create new java source files.

Got it to work by manually editing the ejb-jar.xml file.
"Carl Lawstuen" <[email protected]> wrote in message
news:3bb2349b$[email protected]..
Anyone know how configure the weblogic.wtc.jatmi.TuxedoServiceHome and
weblogic.wtc.jatmi.TuxedoService classes for a new Service EJB in Visual
Cafe?
The classes are not listed in the Configure Enterprise Bean drop downlist,
and if I enter the class names, VC wants to create new java source files.

WEblogic and visual Cafe

Hi
I am trying to set up a distributed debugging on a Sun solaris 2.6 with
Sun jdk 1.1.8 and trying to connect to this using Visual Cafe 3.1 . The
debug dameon on remote machine is being recognised but visual cafe
comes back saying "No JVM" found .
any help would be appreciated
aniruddha

Do not use JDK1.1.8. Use JDK1.1.7 instead.
Wei Guan
ANIRUDDHA <[email protected]> wrote in message
news:[email protected]..
Hi
I am trying to set up a distributed debugging on a Sun solaris 2.6 with
Sun jdk 1.1.8 and trying to connect to this using Visual Cafe 3.1 . The
debug dameon on remote machine is being recognised but visual cafe
comes back saying "No JVM" found .
any help would be appreciated
aniruddha

Error when trying to debug in Visual Cafe

I get a class not found exception when I run the server in Visual Cafe.
Are there any clear directives on how to run the server (JDK 1.2.2, WIN NT)
in debug mode?
This is my class that I'm running and below is the error I receive.
Any help is greatly appreciated.
/Filip
public static void main(String[] args) {
String wlcl =
"d:\\weblogic\\classes;d:\\weblogic\\lib\\weblogicaux.jar;.;D:\\GetLuckyFast
\\release;d:\\weblogic\\classes;d:\\weblogic\\license;d:\\weblogic\\myserver
\\serverclasses;d:\\weblogic\\lib\\weblogicaux.jar;D:\\GetLuckyFast\\release
;D:\\GetLuckyFast\\release\\java_extensions\\cdkjava12_3210.jar;D:\\GetLucky
Fast\\release\\java_extensions\\jsdk.jar;D:\\GetLuckyFast\\release\\java_ext
ensions\\javax.ejb.zip;D:\\GetLuckyFast\\release\\java_extensions\\jndi.jar;
D:\\GetLuckyFast\\release\\java_extensions\\jms.jar;D:\\GetLuckyFast\\releas
e\\java_extensions\\javax_jts.zip;D:\\GetLuckyFast\\release\\java_extensions
\\mail.jar;D:\\GetLuckyFast\\release\\java_extensions\\dcxjp.zip;D:\\GetLuck
yFast\\release\\java_extensions\\activation.jar;D:\\GetLuckyFast\\release\\j
ava_extensions\\jaxp.jar;D:\\GetLuckyFast\\release\\java_extensions\\jcert.j
ar;D:\\GetLuckyFast\\release\\java_extensions\\jnet.jar;D:\\GetLuckyFast\\re
lease\\java_extensions\\jsse.jar;d:\\weblogic\\classes;c:\\jdk1.2.2\\lib\\to
ols.jar;D:\\GetLuckyFast\\release;D:\\GetLuckyFast\\release\\java_extensions
\\dcxjp.zip;D:\\GetLuckyFast\\release\\java_extensions\\mail.jar;D:\\GetLuck
yFast\\release\\java_extensions\\activation.jar;D:\\GetLuckyFast\\release\\j
ava_extensions\\jcert.jar;D:\\GetLuckyFast\\release\\java_extensions\\jnet.j
ar;D:\\GetLuckyFast\\release\\java_extensions\\jsse.jar;D:\\GetLuckyFast\\re
lease\\java_extensions\\jaxp.jar;D:\\GetLuckyFast\\release\\java_extensions\
\cdkjava12_3210.jar";
System.getProperties().put("weblogic.system.home","d:\\weblogic");
System.getProperties().put("classpath","C:\\jdk1.2.2\\lib\\tools.jar;d:\\web
logic\\license");
System.getProperties().put("weblogic.class.path",wlcl);
System.getProperties().put("registration.properties","D:\\GetLuckyFast\\rele
ase\\registration.properties");
System.getProperties().put("weblogic.system.name","myserver");
System.getProperties().put("java.security.manager","");
System.getProperties().put("java.security.policy","d:\\weblogic\\weblogic.po
licy");
try {
weblogic.Server.main(args);
} catch (Exception t) {
System.err.println(new java.util.Date() + "####**** ERROR
t.printStackTrace();
}//main
main (17:59:46): weblogic.ejb.common.DeploymentException: Deployment
Descriptor class could notbe found in ser file:
main (17:59:46): java.lang.ClassNotFoundException:
[Lweblogic.security.acl.User;
main (17:59:46): at
java.io.ObjectInputStream.inputArray(ObjectInputStream.java:806)
main (17:59:46): at
java.io.ObjectInputStream.readObject(ObjectInputStream.java:357)
main (17:59:46): at
java.io.ObjectInputStream.inputClassFields(ObjectInputStream.java:1831)
main (17:59:46): at
java.io.ObjectInputStream.defaultReadObject(ObjectInputStream.java:502)
main (17:59:46): at
javax.ejb.deployment.AccessControlEntry.readObject(AccessControlEntry.java:1
96)
main (17:59:46): at java.lang.reflect.Method.invoke(Native Method)
main (17:59:46): at
java.io.ObjectInputStream.invokeObjectReader(ObjectInputStream.java:1685)
main (17:59:46): at
java.io.ObjectInputStream.inputObject(ObjectInputStream.java:1165)
main (17:59:46): at
java.io.ObjectInputStream.readObject(ObjectInputStream.java:369)
main (17:59:46): at
java.io.ObjectInputStream.inputArray(ObjectInputStream.java:951)
main (17:59:46): at
java.io.ObjectInputStream.readObject(ObjectInputStream.java:357)
main (17:59:46): at
java.io.ObjectInputStream.inputClassFields(ObjectInputStream.java:1831)
main (17:59:47): at
java.io.ObjectInputStream.defaultReadObject(ObjectInputStream.java:502)
main (17:59:47): at
java.io.ObjectInputStream.inputObject(ObjectInputStream.java:1166)
main (17:59:47): at
java.io.ObjectInputStream.readObject(ObjectInputStream.java:369)
main (17:59:47): at
java.io.ObjectInputStream.readObject(ObjectInputStream.java:232)
main (17:59:47): at
weblogic.ejb.internal.EJBDeployment.setup(EJBDeployment.java:279)
main (17:59:47): at
weblogic.ejb.internal.EJBDeployment.setup(EJBDeployment.java:271)
main (17:59:47): at
weblogic.ejb.internal.EJBDeployment.<init>(EJBDeployment.java:232)
main (17:59:47): at
weblogic.ejb.internal.EJBManagerImpl.deploy(EJBManagerImpl.java:204)
main (17:59:47): at
weblogic.ejb.internal.EJBManagerImpl.deployBeans(EJBManagerImpl.java:354)
main (17:59:47): at
weblogic.ejb.internal.EJBManagerImpl.<init>(EJBManagerImpl.java:126)
main (17:59:47): at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:1278)
main (17:59:47): at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:793)
main (17:59:47): at java.lang.reflect.Method.invoke(Native Method)
main (17:59:47): at
weblogic.Server.startServerDynamically(Server.java:87)
main (17:59:47): at weblogic.Server.main(Server.java:61)
main (17:59:47): at T3Debugger.main(T3Debugger.java:16)
main (17:59:47): at symantec.tools.debug.Agent.runMain(Native Method)
main (17:59:47): at symantec.tools.debug.MainThread.run(Agent.java:48)

Carl,
Here's a screenshot of my project's Solution Explorer:
OK, so I have a file called "Resources.resx" and another folder down below called "Resources" which contains images. Which one should I rename and what do I do about possible errors that might pop up when I try to Build or Run the app?
Hello,
I mean the .resx file, but based on your screenshot, the Resources.resx file was generated by Visual Studio and it was not added by yourself, right?
This issue has beend discussed in the following thread, you could compare it with yours to narrow down this issue, since the error message shows that the project added duplicate data.
http://stackoverflow.com/questions/3003914/vs2010-an-item-with-the-same-key-has-already-been-added
You could follow that thread to check both the .resx file and the .csproj file to see whether there are duplicate data have been added.
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Unable to create ear after installing Visual Cafe plug-in for app server 6 sp3.

Installed WebGain plugin for app server 6 sp3. Now anytime I attempt to add a war to an ear in the deployment tool I get the following: xml file or ias xml file missing. Make sure that source archive "d:\......war" is saved before dragging. Obviously I have done this, but has this IDE plugin changed the xml parsers to a different version that could be causing this? Has anyone else ran across this error?

Hi,
Can you confirm to me, if you are using Visual Cafe Enterprise 4.5.1
and iAS 6.0 SP3. Also let me know the the name & version of O/S please.
Regards
Raj
Bob Pfingsten wrote:
Installed WebGain plugin for app server 6 sp3. Now anytime I attempt
to add a war to an ear in the deployment tool I get the following: xml
file or ias xml file missing. Make sure that source archive
"d:\......war" is saved before dragging. Obviously I have done this,
but has this IDE plugin changed the xml parsers to a different version
that could be causing this? Has anyone else ran across this error?
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!

Deploying an application (.ear) from Visual Cafe

What is the easiest way to deploy an entire EJB application.
I.e both the web and ejb parts from Visual Cafe. In JDeveloper you can just deploy
the entire thing. But BEA has told me you have to deploy each part, then use ANT,
then deploy again. Surely this means any change I make is going to take an hour
to deploy.

Check out the Netbeans IDE (www.netbeans.org) !
"Demian Krige" <[email protected]> wrote in message
news:3c4d6ec4$[email protected]..
>
What is the easiest way to deploy an entire EJB application.
I.e both the web and ejb parts from Visual Cafe. In JDeveloper you canjust deploy
the entire thing. But BEA has told me you have to deploy each part, thenuse ANT,
then deploy again. Surely this means any change I make is going to take anhour
to deploy.

Code generation using Visual cafe

I'm using visual cafe for GUI development. It includes it's own libraries though the equivalent ones are available in JDK.
For example: to place a component in GRid Bag layout it generates code with symantec's constructor
new com.symantec.itools.awt.GridBagConstraintsD(,...) instead of java.awt.GridBagContraints(,...) constructor.
Is there any way to tell Visualcafe to use jdk instead of it's own libraries when applicable? let me know if anyone knows how to do this?
thanks,
sampath

The simple answer is NO, or its not simple nor reliable.
The unsolicited answer is; stop using that garbage. I used it for 4 years. Symantec completely dropped the ball. I use the free Jbuilder version. It uses ALL official classes and does NOT force you into code conventions, nor does it complain about many things. VC has its own private section in the code where you can not manually edit it. headache. VC does geenrate much less anonymous classes, but all in all, try JBuilder. Maybe even Forte as I hear good things about that too.
When I converted to JBuilder, I simply changed the symanted gridbag class into the sun gridbag class. In general the symantec class is EXACTLY the same, but symantec was ahead of its time, and needed to make its own classes in order to have the GUI editing since sun didnt have completel beans available at the time. But sun has not privided these beans for years, and still symantec has not adapted. I think they are arrogant now and hope this keeps you forced into their IDE since changing seems hard(though "replace" works just fine in these situations)...

Visual Cafe Enterprise ftp deployment?

Hi,
I am using VC EE to write Enterprise Java Beans which I'm deploying
directly to a Sun E450 running Solaris 7. These Jar files will then be
used by WebLogic Server. I have configured my project
options/deployment tab so that it has the IP address of the Sun machine,
my user account and password. I've also selected FTP as the desired
transport. It mostly works in as much as it copies the file across
but then it just sits there with the progress bar mostly complete. Is
this a known problem? It there are workaround if so?
Thanks for any help,
Ian.
PS I'm using NT 4.0 SP6 on my PC.

OK fixed. We downloaded WU ftpd, installed it on another port on the Sun and
it all works fine.
Ian Butcher wrote:
OK,
This is just an update - I haven't completely fixed the problem yet but I
have the following additional information. I have managed to deploy to Red
Hat Linux and Windows NT using ftp using Visual Cafe. Our Unix system
manager has contacted Sun and they are aware of this problem - that said
they said that it was a bug with 'TCP' (I must admit I thought that FTP was
normally implemented of UDP). For fun I tried to see how long Sun have had
this feature and this feature is present in Soloris 8,7 and 2.6. They
don't have this one very far up the bug hit list. Sun did say that they
plan to fix it in 'some' version of Solaris 8.
Our current plan of action (suggested by another Sun admin) is to install a
third party ftp daemon on the Sun to see if that fixes it.
Ian.
ian butcher wrote:
Hi,
I am using VC EE to write Enterprise Java Beans which I'm deploying
directly to a Sun E450 running Solaris 7. These Jar files will then be
used by WebLogic Server. I have configured my project
options/deployment tab so that it has the IP address of the Sun machine,
my user account and password. I've also selected FTP as the desired
transport. It mostly works in as much as it copies the file across
but then it just sits there with the progress bar mostly complete. Is
this a known problem? It there are workaround if so?
Thanks for any help,
Ian.
PS I'm using NT 4.0 SP6 on my PC.

Visual Cafe 3.1

Could Weblogic fellows put some instruction to debug (Remote JVM Debug) EJBs
using Visual Cafe 3.1?
It never worked successfully for me. Is there any other way debug the
EJBs(Session Beans).
New Developers really struggle to understand where the prpblem is?. I would
really appreciate if any body gives any idea.
Thanks
/selvan
Captura Software Inc

Download the patch Visual Cafe 3.1a from
http://www.symantec.com/domain/cafe/downloads.html. The patch.htm file mentions some
generic replacement files - vcdbg_generic_1.2.exe and vcdbg_generic_1.2.tar that must
be installed to facilitate debugging on JDK 1.2.
Nirav.
Paul White wrote:
Visual Cafe 3.1 does support JDK 1.1/1.2 switching for debuggging (see
Environment Options). Hosting on JDK 1.2 will be avaiable with the
version 4.0 of Enterprise Suite (currently available with the Expert
edition but this does not have the EJB support or Weblogic integration).
VC has had JDK 1.2 denbugging support since March 1999.
Visual Cafe Enterprise allows you to attach to almost any VM for
distributed debugging.
If you want further insructions on EJB debugging take a look at the
Knowledgebase at www.visualcafe.com or post a message to the newsgroups
at
news://service.symantec.com/symantec.support.itools.win.vcafe3.distributed
Note that WebGain is the new company which has acquired VisualCafe from
Symantec and is funded partly by BEA Systems. More info at
http://www.webgain.com
Dana Jeffries wrote:
It's fairly stright forward out-of-the-box.
You do need the VCafe 3.1 Enterprise Suite product.
Let me know what your particular issues are.
(As noted in the follow up message, the debugging API has changed for JVM 1.2
and the debuggers have not yet fully supported this iterface. I have personally
debugged into a 1.2 JVM though only a "remote VM" running on my local machine.
VCafe and Solaris have problems at the moment which are being addressed.)
Dana Jeffries
Companion Products Group
Tamilselvan Ramasamy wrote:
Could Weblogic fellows put some instruction to debug (Remote JVM Debug) EJBs
using Visual Cafe 3.1?
It never worked successfully for me. Is there any other way debug the
EJBs(Session Beans).
New Developers really struggle to understand where the prpblem is?. I would
really appreciate if any body gives any idea.
Thanks
/selvan
Captura Software Inc
Learn how to build reliable, personalised e-commerce Web sites -- and
walk away with FREE BEA software.
Visit http://www.bea.com/events/instant/ to sign up for one of BEA's
European 'Instant E-Commerce' seminars.--
Nirav Chanchani
Product Manager, Tools Integration
BEA Systems, Inc.,
2315 North First Street,
San Jose, CA 95131, USA.
Phone +1 408 570-8159
Fax +1 408 570-8901
E-mail [email protected]
Web http://www.bea.com
[att1.html]

Debugging JSPs using Visual Cafe

          I am using WL 5.1 and trying to figure out how to debug JSPs using Visual Cafe 4.0.(Enterprise Edition). The JSP file is running fine if I use plain "javac" for compilation. If I change the compiler to include -g option (for debug), I get the following error.
          Thu Aug 31 15:46:37 CDT 2000:<E> <ServletContext-General> Servlet failed with Exception
          java.lang.NumberFormatException: error=2
          at java.lang.Integer.parseInt(Integer.java:409)
          at java.lang.Integer.parseInt(Integer.java:458)
          at weblogic.servlet.jsp.JspStub.compilePage JspStub.java:303)
          at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:174)
          at weblogic.servlet.jsp.JspStub.checkForReload(JspStub.java:92)
          at weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.
          java:168)
          at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
          pl.java:99)
          at weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletCon
          textImpl.java:742)
          at weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletCon
          textImpl.java:686)
          at weblogic.servlet.internal.ServletContextManager.invokeServlet(Servlet
          ContextManager.java:247)
          at weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.jav
          a:361)
          at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:261)
          at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
          weblogic.properties
          weblogic.httpd.initArgs.*.jsp=\
                    pageCheckSeconds=1,\
                    compileCommand=C:/VisualCafeEE/java2/bin/javac.exe -g,\
                    workingDir=C:/weblogic/myserver/classfiles,\
                    verbose=true
          If I don't use -g option, the page gets displayed correctly. Any help would be appreciated.
          Thanks
          Sree Pillai


assuming you are running on Windows, you can use a .cmd file with the
          following command in it
          javac -g %*
          if you name it c:/java/bin/javac.cmd, then replace the line with
          compileCommand=C:/java/bin/javac.cmd,\
          Barry
          Sree <[email protected]> wrote in message
          news:[email protected]...
          >
          > I am using WL 5.1 and trying to figure out how to debug JSPs using Visual
          Cafe 4.0.(Enterprise Edition). The JSP file is running fine if I use plain
          "javac" for compilation. If I change the compiler to include -g option (for
          debug), I get the following error.
          >
          > Thu Aug 31 15:46:37 CDT 2000:<E> <ServletContext-General> Servlet failed
          with Exception
          > java.lang.NumberFormatException: error=2
          > at java.lang.Integer.parseInt(Integer.java:409)
          > at java.lang.Integer.parseInt(Integer.java:458)
          > at weblogic.servlet.jsp.JspStub.compilePage JspStub.java:303)
          > at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:174)
          > at weblogic.servlet.jsp.JspStub.checkForReload(JspStub.java:92)
          > at
          weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.
          > java:168)
          > at
          weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
          > pl.java:99)
          > at
          weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletCon
          > textImpl.java:742)
          > at
          weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletCon
          > textImpl.java:686)
          > at
          weblogic.servlet.internal.ServletContextManager.invokeServlet(Servlet
          > ContextManager.java:247)
          > at
          weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.jav
          > a:361)
          > at
          weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:261)
          >
          > at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
          >
          >
          >
          > weblogic.properties
          > -------
          > weblogic.httpd.initArgs.*.jsp=\
          > pageCheckSeconds=1,\
          > compileCommand=C:/VisualCafeEE/java2/bin/javac.exe -g,\
          > workingDir=C:/weblogic/myserver/classfiles,\
          > verbose=true
          > --------------
          >
          >
          > If I don't use -g option, the page gets displayed correctly. Any help
          would be appreciated.
          >
          > Thanks
          > Sree Pillai

Visual cafe 4.0 EE and WLS 5.1

Similar Messages

Maybe you are looking for