Visual Composer 7.0-Change the Y-axis from decimal scale value to integer

Hi Experts,
I'm new in Visual Composer 7.0, my report is work fine, but when I want to show the data in bar-chart, the values on y-axis are 0.0, 0.4.0.8,1.2,1.6.2.0 but i want like 1,2,3,4.
Normally, this happen when values on y-axis less than 5, if more than 5, it will turn to 1,2,3,4. (which i expected)
Inside my function module, I set all the data as integer already..
I read through some suggestions in the forum, they suggest using 'Fixed range' and set the interval size, but need to include min & max value. But, inside my program, min value & max value has to be automatically adjusted, ie i can not set the values for those.
Please suggest solution for me, need it urgently..
Thanks a lot!
Best regards,
Derrick

Hi,
first of all: please close this post. It is definitely the wrong forum. Your second thread regarding this is in the right forum.
Secondly: SDN Moderators prefer to move threads from one forum to another instead of having duplicated posts. You as a user cannot move but moderators can do - so contact your forum moderator and he may move it.
Regards
Anja
(Moderator of VC forum)

Similar Messages

  • Visual Composer 7.0 - Change the Y-axis from decimal scale to integer

    Hi Experts,
    I'm new in Visual Composer 7.0, my report is work fine, but when I want to show the data in bar-chart, the values on y-axis are 0.0, 0.4.0.8,1.2,1.6.2.0 but i want like 1,2,3,4.
    Normally, this happen when values on y-axis less than 5, if more than 5, it will turn to 1,2,3,4. (which i expected)
    Inside my function module, I set all the data as integer already..
    I read through some suggestions in the forum, they suggest using 'Fixed range' and set the interval size, but need to include min & max value. But, inside my program, min value & max value has to be automatically adjusted, ie i can not set the values for those.
    Please suggest solution for me, need it urgently..
    Thanks a lot!
    Best regards,
    Derrick

    Hi All,
    I'm sorry but this seems to me impossible to do.
    In general - not necessarily for this case - there is the option to create your own Flash Components and integrate them into VC, so you could overcome such limitations.
    Using Flash Components in Visual Composer Models - SAP Documentation
    Flash Components for Visual Composer 7.0 - Flexibility is the name of the game
    Thanks,
    Udi

  • Change the Business Graphic Y-axis from decimal scale value to integer

    Hi,
    I am trying to get rid of the decimal points of the Y axis scale to integer.
    The scale value is currently showing like below:
    13.86
    10.395
    6.93
    3.465
    (This actual data set is currently fall between 3.xxxx to 12.xxxx)
    I want the scale label to display in integer, like this:
    15
    12
    9
    6
    3
    or
    13
    10
    6
    3
    This is determined dynamically as I have made the below settings.I am mapping the seriesSource of the Percentage BusinessGraphic to a node of attributes type of decimal.
    In the Chart Designer, I am setting the Y Value Axis configuration as below:
    Minimum  value: 0
    Minumum calculation: Automatic
    Maximum value: 100
    Maximum Calculation: Automatic
    Can you advise me how I can control the graph Y axis scale label to display in integer while I am mapping to a node of decimal data (for percentage values)?
    Thanks,
    KC

    Hi, Poojith.
    After making the below change:
    1. The "Scaling Type" in the "Value Axis" of the Chart Designer is Linear.
    2. I converted the type of the attribute bound to the SimpleSeries to new Decimal(double)
    I am still not able to achieve what I want. I am checking the value of the Value Axis --> Line --> Format.
    Based on the field description ("Specifies the format of the label output"), it seems like it is the value I should change. It is currently BLANK.
    Let me try it out. Please advise if you have any information on the Format string pattern I should use.
    Thanks,
    Kent

  • To change the X-axis from Samples to Time

    Hi All,
    I want to connvert the X axis from Samples to Time on my waveform graph. The waveform graph displays the number of samples acquired along X axis, Initially I am acuiring 1M points of data & using some algorithm to reduce the number of samples from 1M to 2K points. Even after reduction I'm able to see the entire record length of the waveform but interms of 2K samples. But I want the X axis to be displayed in Time.Is it possible to convert the X axis of my graph to Time as there is reduction in points from 1M to 2K or the reduction doesnot affect the change in axis from samples to Time. Please help me as I have tried every thing.
    Thanks

    You can get some information on the waveform data type in the on-line help by selecting the data types>default values topic. This will also point you to the LabVIEW User Manual and the LabVIEW Measurements Manual. Both of these manuals are part of the LabVIEW documentation installation. You have an entire palette called, appropriately, Waveform, for manipulating the data and the front panel control is on the I/O palette.
    One of the options when doing, for example data acquisition, is the type of data returned with a DAQmx Read or AI Read. For DAQmx Read, click the Polymorphic VI Selector below the function to change the type of data returned. a large number of the shipping examples for DAQmx use the waveform data type. Selecting or creating a waveform data type is the easiest way to pass time information to your chart or graph but it is not the only way. You can use a property node like the shipping example called Real-Time Chart.

  • How can I change the Y axis to show my values in a descending order in Numbers. eg zero at the top and the maximum value at bottom?

    Hi,
    I'm just about getting to grips with Numbers, but I'm stumped at the moment with this problem.
    I want to show zero at the top on the (y) axis, as zero is the goal and 100 is the starting point?
    can it be done? i would really appreicate some help on this.
    Kind regards
    Rob

    Is it so difficult to read given answers ?
    Barry described the correct scheme.
    In the table "to_chart", the cell A1 contains :
    =ROUNDUP(ABS(MIN(Tableau 1 :: B:E))/10,0)*10
    The cell B2 embed the formula :
    =$A$1+Tableau 1 :: B2
    Apply fill down and fill to the right.
    On the left edge, the colored rectangle is a text block in which I inserted the label values.
    Of course if you dislike this scheme, you are perfectly free to use an other application.
    Yvan KOENIG (VALLAURIS, France) lundi 4 juillet 2011 14:37:56 iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
    Please : Search for questions similar to your own before submitting them to the community
    To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

  • Change the x axis scale markers in a waveform graph

    Hello all,
    I am looking at an unusual graphing problem that hopefully has been solved.  The problem is because an pre-existing DAQ graph does things in a chart-like manner.
    The application context is that I measure a signal vs. test length.  During the test, I calculate the UUT position as a function of the test length.  The test includes measurements out and back.  Rather than graph signal vs. length; I want to graph signal vs. position.  I have considered the XY graph, but that co-locates the position data.  To remain consistent with an existing test program, I want to change the X Axis marker labels from distance to position at each marker's distance.
    I would like to customize marker text for a waveform graph's X Axis.  I found a sub-property node for marker text, but it does not seem to iterate through a Waveform graph's X Axis markers.
    For example, a test measures the distance 0 to 200 and the X Axis markers are labeled {0, 50, 100, 150, 200}.  How do I change those labels to {0, 50, 100, 50, 0}?
    The Marker Values[] property node does not do what I expected.
    Thanks,
    Kenneth
    Possible solutions:
    1. Find a property node that does the job
    2. Use custom indicators for each marker's labels
    3. Use two graphs, one for forward, the other for reverse testing
    4. XControls

    For your option #4 I would use option #2 but use a single picture and hide the X-Axis and do my own.
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Changing the x axis

    Hi everyone.
    I have done an fft in lab view signal express, but the x axis shows the frequency (Hz).
    I need it to show the range.
    I have the formulae to change the x axis, but i am not sure on how this can be done!.
    the formuale is range = freq *c*dT/(2*dF)
    Where dT = 0.02
    and dF = 66*10^6
    c = 3*10*8.
    how can i get the range on the x axis.
    many thanks.

    Right-click the graph and select Properties.
    Then go to the Scales tab.
    The drop down box shows by default the X-axis, so that's ok
    If you need another scale, select it first.
    On the same tab you also see Scaling factors Offset & Multiplier.
    Calculate both to convert what you have now to what you want
    I won't do the math's for you
    Enter the two values and
    Then click the Ok button.

  • How can I change the media info from Concert Film to Music Video in ITunes 11.01.12

    I purchased a concert film a while back from the ITunes store, and in previous versions of ITunes, I had been able to change the media info from concert film to music video so I could watch it in my library (and any devices) without losing any of my library when I synced my devices (could only have either music, movies or tv shows on device - stupid I know), now with the new version, that option is greyed out, so I can't change anything, is there any way around it?
    Thanks so much!

    When you say "remove his account", do you mean remove his Apple ID as well as all his stuff (music, movies, and whatever else is housed in iTunes)?  If so, delete all his stuff (music, etc.), have him deauthorize the computer (Store > Deauthorize This Computer), and sign out of his account (Store > Sign Out) and then sign in to yours.
    If all you want to do is remove his Apple ID and not fuss with his stuff, then things get more complicated, because you do not own his stuff.

  • How can I change the itunes store from Swiss to the Italian one on my ipad2 with new software ios6? Thanks

    How can I change the itunes store from Swiss to the Italian one on my ipad2 with new software ios6? Thanks

    See More Like This to the right of this post!

  • Possible to change the business Partner from a created Contract in ICWEB??

    Hello experts,
    I would like to know if it is posible to change the BP from a created contract in ICWEB.
    I check the option "CONTRACT MANAGMENT" and there is an option to change the premise with the button "Move To Other Premise" but I don't find an option to change the Business Partner from a created contract.
    Can you help me, please??
    Thank in advance.
    Edited by: Javier Garcia on Aug 19, 2008 7:01 PM

    Hello S Reddy and a lot of thanks for your help.
    But I don't know where I can select this option, there isn't the  where I can associate the option in customizing or what transaction. Could you explain me with more details, please ??
    Thanks in advance.
    Regards.

  • How do I change the default setting from Pages to MS Word for Mac?

    How do I change the default setting from Pages to MS Word for Mac?

    https://discussions.apple.com/message/13008817#13008817

  • I bought an iPad 2 at a yard sale and now it won't let me change the Apple ID from the previous owner to me. What do I do

    I bought an iPad 2 at a yard sale and now it won't let me change the Apple ID from the previous owner to me. What do I do

    If you can't contact the owner, there isn't anything you can do.

  • I change the hard disk from 500gb to 750 gb then i heard qw sound in some interval pls advice me., i change the hard disk from 500gb to 750 gb then i heard qw sound in some interval pls advice me?

    i change the hard disk from 500gb to 750 gb then i heard qw sound in some interval pls advice me., i change the hard disk from 500gb to 750 gb then i heard qw sound in some interval pls advice me?

    I wish it was under better circumstances, but welcome to the discussions!
    It certainly sounds like a bad HD to me. Back up your data and then take it in or call Apple.

  • Can anyone help me, I need to change the address (country) from US to UK so i can purchase?

    can anyone help me, I need to change the address (country) from US to UK so i can purchase?

    Change/Verify Account https://forums.adobe.com/thread/1465499 may help
    -http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id. html

  • Apex 4.0: Change the Search Field to a Multi Value Check Box IR

    I am new here, but hoping to be active :)
    Well, now I am focusing on Apex 4 and I find really new things here. And even new order to develope needs time to get used.
    Still, I am trying to change the Search Field to a Multi Value Check Box in IR. I have found how to make it in Apex version 3, but not at 4 any more.
    Tutorials for apex v.3 write:
    1.Click Edit Page 1 on the Developer toolbar.
    The Page Definition for page 1 appears.
    2. Under Items, click P1_REPORT_SEARCH.
    3. From Display As, select Checkbox ans so on...
    But I do not find any word "Items" in IR and especially P1_REPORT_SEARCH (I assume this should be by default). Under "Report Atributes" I find "Search bar" region, just there is no option for that. Is here any way to make search with checkboxes in v4?

    Hi,
    Tutorial you have check for APEX 3.x probably works still in APEX 4.x if you use classic report.
    As I understand you have now create interactive report that provide out of box search features.
    There is no option to change IR search text field to multi select item.
    What you can do with IR, is hide/disable search field.
    Then you create multi select item and use it in report query where clause.
    Regards,
    Jari
    My Blog: http://dbswh.webhop.net/htmldb/f?p=BLOG:HOME:0
    Twitter: http://www.twitter.com/jariolai

Maybe you are looking for