Visual Composer App in EP 6.0
Hi,
As far as I know Visual Composer is available only from SAP NW 7.0 (~SAP NW 2004s). Correct me if I am wrong.
In that case, is that possible to develop VC applications in SAP NWDI 7.0 and deploy/display it on SAP EP 6.0? If yes can you let me know the steps to do it as EP 6.0 doesnt have an Visual Composer iView.
Thanks & Regards,
Shruti
Hi shruthi,
if you are using EP 6.0 lower than patch 4 then you have to additionally instal VC addons.
Go through this [HELP|http://help.sap.com/saphelp_NW70EHP1core/helpdata/en/22/e082410d4cbe0fe10000000a1550b0/frameset.htm] link for installing in EP 6.0
Chek for [WIKIS|https://wiki.sdn.sap.com/wiki/display/VC/VisualComposer7.0] Here
Check this [DEMO|http://wiki.sdn.sap.com/wiki/display/VC/General%20issues] and a [Blog |http://rahulurskmc.blogspot.com/2008/03/visual-composer-for-dummies-part-1.html]on working with visual Composer
the URL for Visual Composer is http://<serverXYW.com/VC/ and you have the acess to VC role
Regards
Mahesh
Edited by: maheshchandra.lanco on Jul 2, 2010 11:44 AM
Similar Messages
-
Last Data Update in Visual Composer and Web App Designer
Hello,
We want to show the last data update in query result and we used 2
differents ways to do it: throught Web Application Designer (SP 12) and
Visual Composer (SP 10).
In query result of Web Application Designer, the last data update came
in GMT0 and in visual composer came ok (GMT - 3, that's our time zone).
This value (ROLLUPTIME) is taken out of the RSMDATASTATE table and this is used in SAPLRSMDATASTATE program, that is called by Web App Designer.
Why does the difference exist between: Web App Designer and Visual Composer for last data update?
So, I need more information how the Visual Composer brings the correct value (in our time zone) and Web App Designer in GMT0.
Best Regards,
Pablo MoraesHi Mario,
Yes, i used the same user and the same query to access the information. But, how can i check the mapping from my VC user to the BI user?
Regards,
Pablo Moraes -
Building a BI based dashboard in Visual Composer
Dear,
We are using the Visual Composer to build a KPI dashboard based on BW KPI's from multiple queries (NO SEM in the background !)
What we need is to place the keyfigures in the rows and the keyfigure value in the colums. In the colums we further also need an arrow that indicates the trend based on the keyfigure value (ascending, descending,...)
this is how it should look
===================
Keyfigure Value Trend
Gross Sales 100 Down
Net Sales 80 Up
Costs 20 Up
(*) The trend is based on a calculated keyfigure that compares this month's values with previous month's values.
In Visual Composer I'm trying to fit this in a table. After playing around I found that I need to place my keyfigures (column A) in a structure in the Rows in the BW query. Afterwards I can use the "characteristic" Key Figures and place it in my column in the VC table together with the value and the trend.
However, now my real problem occurs. I want to link trend with an image but the image should not be based on a condition linked with the main keyfigure from my row A but on another calculated keyfigure that I do not want to show in my rows at all. I'm affraid this is not possible since I don't see an option.
If anyone has an idea, please share. This kind of VC cockpit apps you see quite often on slides and Xapp presentations but I'm affraid they were all created with SEM cockpits in the background so I hope to be proven wrong.
thxId'try the following:
a) your trend-field is in your query, but unselected in the field list
b) build a formula on this unselected field which selects the image (from the Image Manager)
More on modeling can be found in the Visual Composer WIKI:
https://wiki.sdn.sap.com/wiki/display/VC
and many postings in the Visual Composer (where it might make sense to ask such questions in the future), where I also moved this question. -
Where to get the par file for visual composer application?
Hi Gurus,
I have referred few forum postings about transporting VC iview .
to do that first we have to deploy the par file of the Visual composer application into the target system(QA & Prod) where ever we want to import it........
Now my query is I went to System admin->support-Portal runtime->Root Folder-->Portal apps........
where i have seen my Visual composer application name and otpion to download when I downloeded it it has downloded in unknown format............can i deploy this to SDM of the target system?
Or I need to change the file format into par or par.bak file?
please tell me how to go about it.........
higher points will be rewarded for the useful inputs.......
Thanks in Advance,
DharaniHi Dharani,
Tools --> Options --> Compiler --> Check box deploy for par and mention the namespace and vendorname in the PAR prefix name
Very similar to how its done in NWDS.
Cheers,
Rahul. -
Visual Composer FLEX Server error
Hi guys,
I'm very new to VC and when I try to deploy my VisualComposer app I get this meesage:
Error in compiling Flex application (1). Consult log file for details.
Can anyone help? I dont know where the log file is to check it!
Thanks
TonyHi Tony,
I think you'll have better luck with this question over in the Visual Composer forum:
SAP NetWeaver Visual Composer
Regards,
Scott Jones -
Hello,
When I try open VC application, I have back with blank screen with communicate "Visual Composer Loading...", IE doesn't answer. I have SVG on my local. I checked it on another local computer and it works fine. I restart J2EE engine and VC app. also. What is the problem?
Thanks for help!
MarcinHave you tried to do "right click > Play" on your Visual Composer application ?
Fabien. -
What is new in Visual Composer 7.0 (EhP 1)
Dear Modelers,
You can have a look in the following blog in order to get the information about what is new in the SAP NW Visual Composer 7.0 Enhancement Package 1
What's New in Visual Composer - Enhancement Package 1 for SAP NetWeaver 7.0
Hope you find this information useful and have a nice modeling
Kind Regards,
LuisCreate new Text tab in fields of Table & select Type as Date in VC or use DSRT date function
-
How to create i view in visual composer give details screenshots
how to create i view in visual composer give details screenshots
Hi,
Go through these threads
VisualComposer
http://help.sap.com/bp_epv170/EP_US/HTML/Executive_Cockpit.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1752b737-0401-0010-0ba3-87c3eda8c6ce
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e019d290-0201-0010-f186-8630a949800a
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30987099-a74c-2a10-70b5-a2751ce79359
http://help.sap.com/saphelp_nw04/helpdata/en/fd/4a7e40417c6d1de10000000a1550b0/content.htm
Tarak
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00b9ba6d-1291-2a10-208d-bd27544e7939 -
Can not see "Compose" option in the visual Composer
Hi all
I am new to Visual Composer. I have created a model. But I am unable to add a page because I can not see the "Compose" option.
Can somebody pls tell me the reason.
Its urgent!
Thanks a lot.
KaranHi Marcel
Thanks a lot for your reply.
I am accessing the VC through the web.
http://tcs050965.abc.xyz.com/VCServer/
VC 6.0, MSXML Parser 4.0 SP2
and SVGViewer is not installed.
Now pls Suggest. -
Can we use custom RFC in creating models in Visual composer??
Dear Experts,
Can we use custom RFC in creating models in Visual composer??
If yes, kindly provide some documents or links which would guide me how to achieve it.
Warm Regards
Upendra AgrawalHi,
Yes,you can do it.
Configure the rfc and use like others Standard BAPI procedure.
[https://www.sdn.sap.com/irj/scn/wiki?path=/display/vc/connectivity]
Regards,
Govindu -
Error while making iview with visual composer
I am trying to make an iview usign visual composer.
In the document that i have for making the iview , it says that when you have the bapi list you need to drag and drop the bapi to the empty iview pane . When i do so it gives me the following error ...
"Portal request failed
(com/sap/mdi/ObjectFactory)"
What do i do ?
Would appreciate a prompt help!
thanks again for making me move ahead
I had a conversation with a parson on the forum named Venkat . I am posting the same for other people in the forum to understand what exactly is my problem and how much have we explored .
Regards
Deepak Singh
Hi Venkat ,
I tried to do so research on the problem and it is being talked about in a thread on the forum . They ask to refer to the sap note 765461 to resolve the mdi reference . In the note they ask you to refer the installation guide of the installed version of EP . I have EP 6.0 SP2 . The installation guide says the following ...
7.1.2 Adding References
To enable some of the features in the portal environment, add references to reference file.
To add a reference:
1. With a text editor, open the file:
Windows: <installation drive>:\usr\sap\<SAP J2EE instance name>\j2ee\<instance
number>\cluster\state\services\file\work\managers\reference.txt
Unix: /usr/sap/<SAP J2EE instance name>/j2ee/j2ee_<instance number>/
cluster/state/services/file/work/managers/reference.txt
2. Look for the line:
reference service:eisconnector library:jco
3. After the line mentioned in previous step, add the following in a new line:
reference service:eisconnector library:com.sap.mdi
4. Save your changes and close the file.
5. Delete the file:
Windows: <installation drive>:\usr\sap\<SAP J2EE instance name>\j2ee\<instance
number>\cluster\state\services\file\work\managers.bin
Unix: /usr/sap/<SAP J2EE instance name>/j2ee/j2ee_<instance number>/
cluster/state/services/file/work/managers.bin
6. Restart the SAP J2EE Engine. See Starting the SAP J2EE Engine [Page 60].
7. Restart the SAP J2EE Engine again.
I did the same ....but now my server is not starting . By chance i didn't keep a bakup of the file which they asked me to delete .
Now what do i do ?
I think i am stuck up badly here .
EVERYBODY IN THE FORUM PLEASE HELP
I am not sure how a thing that is mentioned in the installation guide cannot work !
Regards
Deepak Singh
Deepak,
It is not that bad. By deleting you are recreating that managers.bin file during startup based on the reference.txt and library.txt (recollecting from my memory). This could also happen if there is a typo or some special characters in the reference.txt
I don't know what J2EE patch you are at, but after PL22 you can actually add the reference using the "add reference" command from the administrator console.
could you please send the error you are getting? To revert back the simplest thing is removing the line you have added and restart.
Hope this helps.
-Venkat Malempati
Note: Please reward points if your problem is solved or useful.
Venkat ,
I am using J2EE engine 6.20 SP2 .I tried to get the server started by the following two methods
1) I removed my entry in the reference.txt file and then start the engine by running go.bat from the required path .
2) I got the original file managers.bin which i deleted and then placed in the required path and restarted the server
Both the options didn't work .
I am not getting any error when i restart the server. When i run the batch file go.bat it starts the console and shows me the various managers loading . After it shows the Clustermanager loading , it stops and gets stuck .
Not sure what should i do now .Is reinstallation the only solution ?
Is there a solution from the administrator console ?
Regards
Deepak Singh
Deepak,
No you don't need to re-install. Try the following.
1. First start the state controller by runing go.bat in the following directory.
/usr/sap/xxx/j2ee/cluster/state/go.bat
You get the message waiting for cluster manager.
2. start the server in a different window
/usr/sap/xxx/j2ee/cluster/server/go.bat
You get the message waiting for cluster manager
3. Start the dispatcher
/usr/sap/xxx/j2ee/cluster/dispatcher/go.bat
Please let me the know the error messages.
You can chat with me between 10:00 - 11:00 PM US EST.
Regards
-Venkat MalempatiPeople ,
I tried to do what venkat suggested . Infact I had mailed him the snapshot of the screen when i start the state controller as he suggested . For other people in the forum this is what is happening . When i start the state controller it displays an error and then the window closes immediately . I have managed the screen shots somehow and in those i could find two messeges in the begining and the end which could be useful for debugging the problem ...they are
1) [DBMS]: ID3004:DB file header do not match exception .
com.inqmy.services.dbms.server.interfaces.DatabaseException: Error while opening database ...
2) ID000544: Error statrting service dbms. DBMS service not started properly due to: Errro while opening database
[Framework -> criticalShutdown] Service dbms startup error !
After the state controller window closes i run the server in a different window and i get a message waiting for the cluster manager as suggested . Now i start the dispatcher and i get the same messege there as well ie waiting for the cluster manager .
What is to be done now . Is this information sufficient to suggest me something ? Please let me know if you require any other information .
Regards
Deepak singh -
Flex Table Add Row Issue with Dynamic Entry Lists in Visual Composer
All,
Your help would be kindly appreciated in resolving an 'Add Row'-issue within a Flex Table that uses Dynamic Entry Lists in Visual Composer. The issue here is as follows :
When I use a [Local Dynamic Entry List |http://www.postyourimage.com/view_image.php?img_id=O5hrG2aMxWZ84Mu1211193041]to populate a row field, the initial row and all next rows are emptied upon 'insert row', they loose their selected values and also the entry list values ('pull-down menus') are lost. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=FPLr2cABcgiHRou1211192889].
The initial row does [show the entry list values |http://www.postyourimage.com/view_image.php?img_id=2HybmEHAuQYs9cg1211192766]from the Local Dynamic Entry List based on the dynamically assigned input value; upon 'insert row' the entry lists are lost. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=FPLr2cABcgiHRou1211192889].
When using a [Global Dynamic Entry List |http://www.postyourimage.com/view_image.php?img_id=m5p2KYuBb442dTq1211193501]to populate the row fields the Flex-table behaves normally as expected. Unfortunately with a Global Entry List it is not possible to dynamically assign a input value. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=U96V0zENCCyO3gA1211193157].
Please also see the [issue summary image|http://www.postyourimage.com/view_image.php?img_id=06xti08tIEfely1211195178] I made to visualize the issue. What I basically would like to know is whether this is a 'known issue' or not, or that it is an issue that can be fixed or whether there is an alternative workaround available ... I'm using Visual Composer 7.0 and the Portal is at SP 13.
Many thanks,
FreekHi,
you should be able to assign a dynamic value with global entry lists as well. If you say @myParam as dynamic value. VC will indicate in red letters, that the field @myParam is unknown. However, it will work, as long as @myParam is known in the form or table where you use the entry list.
I have never heard of the problem that entry lists are emptied after "insert"-event.
Kindes Regards,
Benni -
How to use ENQUE and DEQUE BAPI in Visual Composer
Hi All,
We are planning to update employee Address through Portal for that one we did one BAPI which supports ADDRESS Change of an employye, through Visual Composer we developed the application and we integrated into SAP Portal but we are not able to update our records, then we found BAPI_EMPLOYEE_ENQUE and BAPI_EMPLOYEE_DEQUE, but we don't know how to use thease BAPI's in Visual Composer i mean how to make connection between out input form and thease BAPI''s and our custom BAPI's.
If any one having this experience please let me know.
Thanks in Advance.
Thanks and Regards,
Abhi.Hi,
Nice to see your reply, we got this error in R/3 it self, when we are trying to excuting SAP Standard BAPI we are getting this error "Employee/applicant is not locked yet". I think this is bug from SAP itself, do you have any idea about this one? is there any settings we need to do in R/3 for resolving this one or else is there any data we need to maintaine for our Employee Records.
Please resolve my issue.
Thanks in Advance.
Thanks and Regards,
Abhi. -
Unable to create visual composer table view from the Bex Query
Hi
I am trying to create the visual composer lay out from a Bex query. The Bex query contains a set of Key figures and a structure.
These key figure and structure combination is forming a table in the query output. Key figure parameters are coming as rows and Structure parameters are coming as columns.
example query out put:
Total, HPC, FDS excel ICe etc are as Structure elements and coming as columns in query out put and
Invoice value, Gross sale value, Efficient operations etc are as Key figure elements in query and coming as rows in query out put.
But if I map this query to visual composer table view all these are coming as columns as given below.
Total Invoice value , Total Gross sale value, Total Efficient operations, HPC Invoice vale,.........
And if execute the query will giving the out put in single row.
Can anybody help me out to map this in the row column format?
Is it really possible to do in VC?
I am using CE 7.2. The VC model I need to be embedding in BPM.
Please help me to solve this issue. I completely stuck up this issue.
Regards
Sajith P
Edited by: Sajith P on Aug 17, 2010 3:07 PM
Edited by: Sajith P on Aug 17, 2010 3:15 PMHi,
Try to use some function module which will convert query data into flat tables. (eg., RS_VC_GET_QUERY_VIEW_DATA_FLAT).
Hope this solves your issue.
Regards,
Vinay -
How to working with BI in Visual Composer 7.1
Hi.
I want to work with BeX Query using Visual Composer 7.1
I created BI system in EP System configuration.
http://help.sap.com/saphelp_nwce10/helpdata/en/7e/6dbcea3700452195e3bddaa47c5906/frameset.htm
http://help.sap.com/saphelp_nwce10/helpdata/en/46/081ed5f8685875e10000000a11466f/frameset.htm
But I can only see Web service destination and RFC destination. What shall I do to solve it?
And Why /nwa -> destination is only see in VC?
Help me^^Hi Kang Min Shim ,
In order to search for BI destinations in VC you must have the BI Kit for VC installed on your machine.
If you have that BI Kit installed you need to [define a BI destination|http://help.sap.com/saphelp_nwce10/helpdata/en/45/c21540edc547f5e10000000a114a6b/content.htm].
I hope it helps,
Udi
Maybe you are looking for
-
How do I sync iPad 2 to my computer..devise is not recognized in iTunes but it does charge when I connect it?
-
Hi guys, We have developed a File-XI-Idoc scenario, which works fine. The problem is that we want each file that is found in the folder where XI reads files, to be processed first and the corresponding Idoc that is produced from the mapping to be pos
-
Applescript - get images from urls in excel
I have huge a excel file with 2 columns, name_* and url picture. Is there a way to automate all the picture download and rename it with name_* to a specified folder?
-
Dreamweaver CS5.5 Adobe AIR Interface Still Generates 2.0 Namespace
Hello Dreamweaver Team, I'm using Dreamweaver CS5.5 for Adobe AIR development using HTML/Javascript. I noticed that up to now, the Adobe AIR interface (AIR Application Settings... on the Site menu) still generates an 'application.xml' file with the 2
-
How do I remotely unlock an iPad using the Find My Phone app from my iPhone once the iPad is connect to WiFi?