Visual Composer Exit Button

Hi Experts,
In Portal My page contains 2 iviews.
1) KM Document Iview.
2) Visual Composer Iview.
In Visual Composer Iview there is a Table,Submit and Exit buttons are there.
When i click on the Exit button, the iview is getting closed. But the problem is, whenever we click on the Exit button, then it will close the entire window.
Could you tell me how to close entire window, whenever we click on the Exit button in the Visual Composer.
Regards,
Vijay.

Hi,
Under Exit button proberties you can find System Action Radio button. Select System Action Radio button.
There you can find some formulas to exit.
Regards,
Vijay.

Similar Messages

Create a sequence of actions in the toolbar button in Visual Composer

Hi!
I've a problem with the toolbar buttons in visual composer. On a table, I would like to have one button which launch 2 actions. For example, I want to call an event (custom action) and after that I want to select a row in another table (system action, select).
It works fine when I create 2 buttons with the toolbar buttons but my wish is to have only one button with several actions (like a sequence of actions). Is it possible?
Thanks for any help!

Hi Ronan,
I think you can achieve your requirement by creating the Wizard in SAP Visual Composer.
The following link provides the detailed steps to Create the Wizard in SAP VC.
http://help.sap.com/saphelp_nw04s/helpdata/en/88/fedb4269b2f340e10000000a1550b0/content.htm
Please have a look.
Thanks,
Prashant
(Please reward points for useful answer)

Visual composer buttons distorted after translation

Hi,
I have generated translation worklist for one visual composer iview. For polish and czech transaltion the buttons size are changed and they grew bigger. Please suggest some solution. i tried to change the size from model but no success.
Regards
Imran

Hi
Just try with the 'Actual Size' & 'Absolute' Layout of the button. Also make iView & Form also as 'Actual Size'.
There is one more work around, try with giving spaces after the button name in the display tab of the button properties.
Either of it should work, Please let me know if there is any other issue.
Regards
Sandeep

Create a Table in Visual Composer 7.0

Is there a way to create a custom table, as part of the model, where you can define some custom fileds, then have users add, delete or update those table fields from a form? Similar to how you would use MS Access?
Thanks
John

Hi John,
You can add, delete or update the table entries from a form using system actions in visual composer. But you should create a form manually and also need to make buttons with system actions addrow, deleterow etc,. to set the system actions.
Regards
Basheer

How to call a BAPI from Visual Composer

hi,
I am new to Visual composer. can some body give me step by step information of calling a bapi or RFC from VC.
Thanks in advance,
Gopi

Hi Gopi,
Steps involed for calling RFC/BAPI from VC
1. Choose Model->Select Data Services.
(Alternatively, click the Data button in the task panel toolbar.)
2. In the Portal field at the right end of the main toolbar, enter the URL of the portal from
which you can access the back-end system used by the iView.
For example, you could enter: http://<yourportal>:50000/..
3. Click the traffic light icon to the right of the Portal field. The portal Welcome screen
appears.
4. Log on to the portal as a user that exists in the connected back-end system, or which is
mapped to a user of that system. Click OK.
Once a connection to the portal is established, a list of system aliases defined in the
portal system landscape appears in the System drop-down
list.
From the System drop-down list, choose the SAP system that contains the function module.
6. Under Search SAP System, click the Search tab and in the Name field, enter the search string: <RFC/BAPI name>. Then click Search (at the bottom).
5. A list of function modules matching the search string is displayed.
7. Drag the function module/bapi from the Data task panel into the
workspace: The data service is added to your model.
8. Periodically save your work. To do so, choose File->Save Model.
Finally test the iview in VC.
In the workspace, drag your mouse from the Input port of the data service, <inputform> and dragn your mouse from the outut port from the data service <tabelview and etc..>
or
Go through the this documentation...
http://help.sap.com/download/netweaver/nw04/visualcomposer/VC_60_UserGuide_v1_1.pdf
Thanks,
Suriya.

Deploy in Visual Composer fails.

Hello Experts,
    I am new to visual composer. I created a small application which compiles OK. When I click the Deploy button, I get the following on the screen:
      1. Compiling SalesOrder...
      2. Deploying...
         Error in compiling Flex application (1).
         Consult log file for details.
There are no error messages in the VC log on the screen and there is no message in the portal defaultTrace file. In the visual composer I have turned up the logging, but I don't see any error messages.
Thanks for your help and suggestions.
-Arvind

Sorry for my stupidity ;(.
Configuration is similarly. VC70/EP70 SP14. Local SLD
Compile is ok, but deploy - no.
log:
"Error in executing a process for Flex compilation: java.lang.InternalError: An error occurred because the
re is no graphics environment available. Please set the headless-server setting in the configuration file to true.
what must i do?
w Regards
Vlad
Edited by: Skif on Jan 21, 2010 3:13 PM
Edited by: Skif on Jan 21, 2010 3:15 PM

Export in Visual Composer

Export in Visual Composer
Hi Experts!!!
I have a button with the export data in excel action, but in the forms I have an image with input fields, but when I do the export in the excel file only is forms data, the image is not export.
Any idea??
Thanks in advance
Regards!!

Hi Experts!!
I am following "How to export data from visual composer" guide, my problem is that in the guide use Querys and then it use a formula for to call Web Analyzer... can I call Web Analyzer if I use BAPI?
Thanks in advance!!!
Regards!!
Edited by: Carlos Mallebrera on Jan 13, 2011 12:04 PM

How to make Exit button for Out-of-browser application

Greetings all,
This sounds so simple, yet I can't find anything about it. I want to make an Exit button in a Silverlight 4 Out-of-browser application. When the user clicks the button, the application is to quit or close or exit. (The same effect as if the user clicks
the red X icon in the upper right-hand corner of a window.)
Any ideas will be appreciated.

Jonathan --
Yes, the word Page has taken on many meanings in the last 15 years. I'll clarify. When I make a simple Silverlight OOB (out-of-browser) application using Visual Studio 2010, I ask Visual Studio to Add New Item, then choose Silverlight Page. Let's
say I name it Page2.xaml.
By default VS2010 already made another page for me, MainPage.xaml.
Now, here is my need: On the page called MainPage.xaml, I want to place a large button that says Exit Application. When the user clicks that button, I want the application to end and the entire window to close. This is the standard behavior in most traditional Windows
applications, for example in Microsoft Word or Microsoft Excel or Microsoft Access. In any of those traditional applications, the user can, from the menu, choose File/Exit. If he does, then not only does the application quit, but also the window
closes itself. The user doesn't have to click the small red X icon in the upper right corner.
That simple behavior of almost all traditional Windows applications, large and small, is what I'm looking for in my simple Silverlight
OOB applications: An Exit command that quits the application and closes the window itself.
Sorry for the confusion. I really appreciate your help. Any ideas?

How to write plan data into Transactional Cube from Visual Composer ?

Dear experts,
Visual Composer is very powerfull to build a 'nice-looking' web-report (I think is much better than Web Application Designer in term of freely position the chart/graph/table/selection parameter in anywhere we like. We can't have this flexibility in WAD) plus it also has strong integration to R/3 for posting the transactions via RFC-Enabled Function Module (such as changing customer credit limit, approve PO, approve Sales Order, etc), so that the R/3 user won't even have to know the TrxCode.
In addition to this, I just wondering if VC also capable to write plan data into transactional cube via Write-Enable Query. We can simply insert a BW Query into VC as planning layout (set the edit-mode to "editable") plus having some Wizards to make it more user-friendly and self-explanatory for the users.
But I am not sure how to save the changes back to transactional cube from VC.
Could anyone please kindly advise how to achieve this.
"Seeing is believing" is always my learning method, so I would appreciate some "actioanable" explanation or hints.
Many thanks,
Sen

Hi Sen,
As far as I know, it's not possible to write data into transactional cubes directly from a table in Visual Composer through standar method, but it's possible to integrate a WAD with your input ready query into a URL element in VC (You can fill entry variables in VC and call WAD dinamically), so it's possible to create a planning application in VC calling dinamically WAD's.
Another way to interact through VC is creating button objects that calls planning sequences (with BAPI calling RSPLS_PLSEQ_EXECUTE). Also can fill variables in VC and pass them to sequence.
Regards,
Enrique

Exception handling in CE Visual Composer 7.1

Hi,
I have modeled a CAF Business Object and a custom Find operation which looks for a custom key. After that, I have exposed that operation as Web service and consumed it in Visual Composer. It is working perfectly as long as the search key exists in the Business Object backend table. When an arbitrart search term e.g. 1234 which does not exist is given, an error message is displayed and the program logic is halted.
Error occured while executing the service: Error in connection: Could not execute Web service, consult your administrator
My requirement is that, is it possible for me to display a custom message such as "The ID does not exist. Please enter a valid ID".
Besides, is it possbile to bypass this service call if it is not working? In my scenario, this service is actually used to search for any existing data for a selected Customer. If there is no data, the user can proceed with a new definition. So, the above mentioned exception blocks the program flow and the user is not able to continue.
Thanks in advance for any suggestions or ideas.
Regards,
Joon Meng

I am not aware exception handling features of VC but instead of raising SOAP Fault you can also transfer log message which is user friendly to display.
Another thing, instead of throwing exeption handle it inside try block so that program do not halt abruptly but gracefully. It is always possible to bypass existing service call like you said if output of service is not input of another.
In other word do not map output directly but on the "Next" event of button which enable you to goto next screen to work.
Regards,
Gourav

Security issue in Visual composer

Dear all,
I created several queries using BEx query designer and I use those queries in a dashboard which is created by using visual composer. it is working fine until I added authorization using authorization analysis in those queries. I use Transaction code: RSECADMIN to test each query using a test account and I don't get any error from the log and the data display correctly.
However, when I run the visual composer using the test account, I am getting a popup message: Application error: "An error returned form the back-end system: Nested Exception. Failure to execute native function. Nested Exception. NO_AUTHORITY"
However, If I click on the error message OK button, the message go away and the data can still display correctly from the screen from each query so I should not have authorization issue and should not get the message since I can display all the data. How can I find out what authorization issue the dashboard (visual composer) is talking about? Thanks.

Hi,
have you checked [this wiki|http://wiki.sdn.sap.com/wiki/display/VC/Authoritycheckerror] about authorization checks in case of calling BI query from VC?
Cheers

Hi. Friends. Unable to Pass Parameters in Visual Composer

Hi.
             Currently we are working with Visual Composer. Our
scenario is like we have developed 3 Iviews in one page. we
could be able to get result also.
                    But our scenario is like whatever the values we
give in First Iview, those same values we should also get in
second and third Iview.
                  For Example we have plant and vendor, If we give
or submit some values in First application, those values
should also come as in second Iview.
                 we are getting result for First Iview and second and even third also If you run Individually. But whatever the values we give in First Iview, those are not taking in second Iview as default values.
                  What we have tried is 1) we have considered URL(Hyper Link Option)
                                                   2) Data Store
                                                    Kumar. B.

Hi Omer,
               Thanks for the immediate feedback and also for the solution.We have got the result with the following way by giving the single values to fields in URL.ex plant - 8302 and material_type=z001.
In the same way we have tried the same by following the document "Drilldowns in VCModels" 17th page "DRILLDOWN TECHNIQUE#5: Chart or Table > any parameterized URL " i.e https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0127853-23a2-2910-30ad-c1873643c504
for our requirement.
As you know our requirement was to pass the parameters of first iview.So in the first iview we have used in a button hyperlink action in which we have given the second models URL prefixed the following parameter string .
&_paramsXmlStr_=<Params><Row Material_type="#ID[ACA8HN]@Material_type" Plant="#ID[ACA8HN]@Plant"></Row></Params>
If i give this above one in 1st iview,it is not getting compiled.So we have encoded to
&_paramsXmlStr_=%3CParams%3E%3CRow%20Material_type%3D%22&#ID[ACA8HN]@Material_type&%22%20Plant%3D%22&#ID[ACA8HN]@Plant&%22%3E%3C/Row%3E%3C/Params%3E
even without "&" in params for the values in above string.Even then its not bringing the values what we have given in first iview.
Could you please let us know where we are going wrong.

Navigate to another iView in Visual Composer

Sorry for the reposting
I am trying to configure navigation from one iView to another. I have going through many tutorials but to no avail.
The result of the steps below should be that the source iView is shown. When the submit button is clicked the value in the source_field should show up in the target iView.
However nothing happens when you click the submit button.
Please Help.
Here are my steps.
In Visual Composer
Create a new model.
Create a new package. (Drill into package)
Create an iView named source. (Drill into the iView)
Add an Form view: Form 1.
Add a Start connector and link it to the in port of the form.
Right click on the form and select Configure Element
Add a new Input Field: source_field
Add a new pushbutton: submit
Open the properties of the submit button
è Open Action Tab
è Select custom action
è Set custom action: TO_TARGET
è Click Close
Click and drag from out port of the form and select Signal Out
In the Select Output dialog
Select source_field
Right click the newly created Signal Out and select Configure Element
Change the name to Port
Click on the link from the form to the Signal Out icon
Change the Event Name to TO_SOURCE
You should see in the lower right panel
Input field Assigned field
source_field @source_field
Navigate back up to the package
Create a new iView named target
Drill into the iView
Add a Signal In connector. Configure the name to Port
Add an input field : source_field
Add a new Form view : Form1
Link from the Signal In to the in port of the form.
Right click on the form and select Configure Element
A field source_field will have been automatically created. Set the type of the field to Input Field.
Click and Drag from the out port of the form and choose End Point. Do not select a field for output.
Save the Model and deploy.
The result should be that the source iView is shown and when the submit button is clicked the value in the source_field should show up in the target iView.
However nothing happens when you click the submit button.
Please help?
Rick Laird

Hi Rick,
I reconstructed your model.
First I think, you have made one mistake (perhaps you just mixed it up in your description): The event name from the form to the Signal Out icon should be "TARGET_TO" instead of "SOURCE_TO" resp. the same name that you define on the custom action tab in the properties window of the push button.
However I could not solve your problem as described, but I put the two iViews in one Page (instead of a package) and then it did well.
I Hope I could help you at least a bit.
Regards,
Oliver

Passing a range of dates from Visual Composer 7.0 to Bex Analyzer

Dear Experts,
         I created a button in my Visual Composer model that has the following settings:
System action: Hyperlink
Apply to: Self
Hyperlink address: "...QUERY=BMMSEG_C01_SAS_Q0001&BI_COMMAND_1-BI_COMMAND_TYPE=SET_SELECTION_STATE&BI_COMMAND_1-TARGET_DATA_PROVIDER_REF_LIST-TARGET_DATA_PROVIDER_REF_1=DP_1&BI_COMMAND_1-CHARACTERISTICS_SELECTIONS-CHARACTERISTIC_SELECTIONS_1-CHARACTERISTIC=MBUDAT&BI_COMMAND_1-CHARACTERISTICS_SELECTIONS-CHARACTERISTIC_SELECTIONS_1-SELECTIONS-SELECTION_1-SELECTION_INPUT_STRING=08/22/2006;08/28/2006"
        Basically, what I need is to pass a range of dates from Visual Composer to Bex Analyzer on the characteristic "MBUDAT". However, it only brings back the data with those specific dates, not the range.
      I don't think this is the correct syntax to pass in a range value: 08/22/2006;08/28/2006 Please advise how should I do it.
Thank you in advance,
Kevin

Hi J GOEL,
       Thank you for your quick response. I created a date range variable ZPSTDAT, and then I passed in the oncatenated value to my Bex query (for this example, let says the From date is 08/22/2006, and the To date is 08/28/2006 ).
      Here's what I passed in into the url:
...QUERY= BMMSEG_C01_SAS_Q0001
&BI_COMMAND_1-BI_COMMAND_TYPE=SET_SELECTION_STATE
&BI_COMMAND_1-TARGET_DATA_PROVIDER_REF_LIST-TARGET_DATA_PROVIDER_REF_1=DP_1
&BI_COMMAND_1-CHARACTERISTICS_SELECTIONS-CHARACTERISTIC_SELECTIONS_1-CHARACTERISTIC= ZPSTDAT
&BI_COMMAND_1-CHARACTERISTICS_SELECTIONS-CHARACTERISTIC_SELECTIONS_1-SELECTIONS-SELECTION_1-SELECTION_INPUT_STRING= 08/22/2006:08/28/2006
   However, it returns all the records, so it seems like it doesn't even accept the range value that I passed into the Bex. Do you mind to please show me the url you have that pass in the date range. I just need to see the date range part, not the entire url.
Thanks,
Kevin

No access to Enterprise Services via Visual Composer

Hi,
I've configured the new landscape of EsWorkplace (HU2/800) in the Visual Administrator.
After I start the Visual Composer and log in I get the list of Enterprise services normally, but when I click on the Enteprise Service to get the Data service to model in the story board, nothing happens and I can't get the Data service.
Can anybody help in this issue?

Hi Ghosh,
I had used fine the EsWorkplace environment until the update of the landscape, when the system id was FU2. I used the Enterprises Services directly in Visual Composer and used in the NetWeaver Developer Studio by CAF Services too.
When SAP changed the landscape (system id HU2) I received another password for my userid.
I changed my WebService Security in the Visual Administrator and when I started the test, I see that I don't get to use the Enterprise Services directly in the Visual Composer.
The applications that I created in the Developer Studio still work fine, but When I select the button "Find Data", select the HU2 system , and select the search button the result is showed at the screen , but when I click on the Enterprise Service nothing happens, and I can't get the Service for model at the Story board.
thanks,
Márcio

Visual Composer Exit Button

Similar Messages

Maybe you are looking for