Visual composer How to create an e-mail

Hi everybody
Someone can help me with the ownership of user data I need to create an iview to send emails
and saw that this property is within the user data that comes in email
How I Can create a mail from this property with visual composer
Thanks

Hi,
Plz follow the below Blog
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c09fd8a0-96ac-2910-a0ba-f00d2ab70949
Regards,
Govindu

Similar Messages

Verizon Blackberry Internet Service Client (BIS)- How to create an e-mail Filter

Hello. Thank you in advance for replying to my question. I am trying to create an e-mail filter so that a contact's e-mail messages do not get delivered to my BB and instead just go straight to my regular e-mail account. I understand that you can do this function from the BIS, however when I tried to create an account I received a message that said "please use your device to access the BIS." I did just as the message told me but I did not get the same menu options from my BB as I would have gotten from doing it from the internet. The page only showed a list of my e-mails and an "edit" and "delete" choice for each one. There was no "Filter" button for me to click. I remember a while ago I able to access this page and was able to remove the BB signature (i.e.. "This message is being sent from a BB"), so I know that it was possible to access this page. I do not know why I am not able to accesses it now.
If anyone out there has Verizon and knows how to access the BIS, please let me know how. Or if you know how to create an e-mail filter function, please let me know.
Thank you,
Fred
Solved!
Go to Solution.

Hi there!
To log into your BIS account from a PC/browser (not the BB browser), go to this URL:
https://bis.na.blackberry.com/html?brand=vzw
Enter your BIS credentials and you will then be in your BIS account screen. From there, use this KB to create the filter you desire:
KB04558 Add a filter to a BlackBerry Internet Service account
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

How to create a group mailing list in JavaMail?

Hello,
I've been searching through the entire API, specifically the InternetAddress class and I can't seem to find out how to create a group/mailing list. Does anyone know how to do this?
That is, I would like to be able to group a bunch of e-mail addresses together and give that group a name "my friends". Then send it off using this 'group mail address' as opposed to an array of InternetAddress[]. Then when the recipients receive the e-mail, they see "my friends" in the To: field, instead of everyone's e-mail address...
Is this possible in JavaMail? I've tried many things like creating an InternetAddress object passing in a comma-delimited list of e-mail addresses but it doesn't like it.
Thanks in advance!

Hi:
I have the same problem. I've read JavaMail implements RFC 822 which allow mailing lists. But, �how can I implement it with JavaMail?
Best regards,
Fabio Galarraga.

How to create a group mailing list?

how to create agroup mailing list?

i have followed instructions on "how to create a group mailing list" & get a total blank when i hit return after entering the group name in addressee column. this is after i created a new group under address book, & then drug over individual names into the group. what am i doing wrong?

Scroll bar color of Visual Composer : how to change it ?

Hello Comunity,
I am developing application using Visual Composer within EP7.01 SP6, and I can not manage to find how to change the original blue of Visual Composer application for scroll bar.
Does anyone knows where to change this color ? I believe it is a general color that is defined somewhere that needs to be change in the portal theme editor in the Visual Composer part, but I did not find it...
Any help appreciated !
Thanks a lot.
Fabien.

Hi
Its not inside Visual Composer application. You have to do it at Enterprise Portal level.
Also inside VC model you need to select 'Flash Runtime' from tools (Options).
Basically you need to change theme settings in content administration of VC.
Regards
Sandeep

How to create an e-mail that contains a graphic flyer notice

I need to create an e-mail poster advertisement for a
recreation area that
will be sent out to shareholders. I need to do this as an
extra-curricular
activity for work. Does anyone have any suggestions on how I
would do this?
Would I create the web page and then send the web page in an
e-mail. I need
the info to show up directly, not
through an attachment. Also, once created, this will be sent
out to
shareholders. How do I save this file to disk( in what format
)so that it
can be sent out by my boss. Any suggestions would be helpful.
Thanks
jmick

Thanks for your assistance. I went to mailchimp and found
some helpful
information. I also found another program and created a
presentable draft
that I have forwarded on. Thanks again.
jmick

How to create folders in mail?

How do I create folders in Mail?

This discussion is just about one year old. I suggest you start a new discussion.
Please include details about your Macbook Pro, the version of the operating system and the version of Mail you have.
https://discussions.apple.com/community/notebooks/post!input.jspa?containerType= 14&container=2097

How to create a notification mailer that handles only some of Item Types

Hi All,
we are currently try to create another notification mailer to handle ONLY some of the workflows.
I have been browsing the internet (oracle site and none) as well as looking for an answer here but I was unable to find a solution/detailed documentation.
The only reference I was able to find is in the Oracle Workflow Admin's Guide where it's written "you can create a notification mailer that processes only messages that belong to a particular workflow item type" but it does not explain how.
Can anyone help me?
Thank You, Pier Paolo.

You may use Correlation ID parameter of the mailer to specify the Itemtype that your mailer should process. This information should be available in the Workflow Admin Guide or Oracle Apps Admin Guide.

How to create procedure to mail ORA-error

hi all,
anyone please tell me how to create a procedure to mail the ORA-error when ORA- error comes in alert.log

Ok, I can't really do this for you. It's not hard, just a lot of back-and-forth testing needs to be done. To do it solely in PL/SQL you need to monitor the alter_<sid>.log file for changes and filter the changed records for ORA- errors.. So, first step is to create, or get the dba to create a directory for that bdump directory. This will allow you to open the file for reading in PL/SQL
This is on an XE 10g database as SYSTEM user, with poly being the database user that is monitoring the file.
select value from v$parameter where name like 'background_dump_dest';
/usr/lib/oracle/xe/app/oracle/admin/XE/bdump
SQL> CREATE DIRECTORY BDUMP_DIR AS '/usr/lib/oracle/xe/app/oracle/admin/XE/bdump';
create directory succeeded.
SQL> grant read on directory alert_dir to poly;
grant read succeeded.After this, you need to read the file and search for ORA- messages. You use the UTL_FILE package to do this. The following subprograms in UTL_FILE will be useful to you.
Function: UTL_FILE.FOPEN You use this to open the file in readonly mode. Please look at the UTL_FILE documentation examples.
Procedure: UTL_FILE.GET_LINE You use this to read lines into PL/SQL
Procedure: UTL_FILE.GETATTR You use this to get the filelength. If the filelength is different from your previous call, you know some writes occurred.
Procedure UTL_FILE.FSEEK You use this to position the reading stream to the first byte of new data read. You've detected the file has grown in size and do something like utl_file.fseek(file_desc,last_file_length+1)
Procedure UTL_FILE.FCLOSE Close file when done.
Pseudologic:
This logic assumes you have a table which stores the filelength from the last time you executed the procedure. This allows you to only process records that have not already been processed.
1. Read last file length from persistent storage such as a table. Default to zero if no value.
2. Get filelength using UTL_FILE.GETATTR
3. Compare filelength. If equal to prior value, exit. If greater, than more lines added. If less, then dba must have rolled the log, reset prior filelength to zero to process entire new file.
4. Use UTL_FILE.FSEEK to position reader to one byte past last file length. This is why we default it to zero, 0+1=1.
5. Open file using UTL_FILE.FOPEN
6. Loop while data is avaliable, read each line, use instr or whatever to detect ORA- messages, call SMTP mailer as needed. You may want to log each email into a log table.
7. After loop, set persisted last file length (update a table and commit maybe) to value returned from UTL_FILE.FGETPOS.
8. Sleep for some interval of time. Start back at step 1.
You should consider using DBMS_SCHEDULER to set up this job.
There are lots of other ways of doing this. Remember that it's possible for your database to crash and your procedure might not be able to send an email. If someone edits the alter file and adds lines anywhere other than at the end, your program may resend some messages.
Edited by: david.sweet on Feb 19, 2011 10:16 AM: changed the word function to procedure for most of them

How to create stationary in Mail

I would like to create a stationary template in Mail. Any easy ways to do this?
Thanks
DC

I have the same question and issue. How do you save the pictures after you place them in the "place older"?
I compose the email text, click the stationary icon and select the stationary I want, the text shows up correctly, then I drag pictures to the stationary. I try and save as stationary the "save stationary" is not highlighted. I have tried several ways with no luck. I want to save the stationary just how I like it, without having to recreate it every time.
Suggestions as to where I'm going wrong?

How to create checkbox in mail content

Hello,
I have created a program to send mail. The requirement is to write some text in mail content along with pdf.
The issue I am facing is that the mail content(body) should contain check boxes.
At present the mail body fetches all text from SO10 standard text. I have tried inserting symbol in SO10 ( SAP-SYMBOLS ) but the out displays <697>,, instead of checkbox in mail.
How should I create checkbox that are displayed in mail body.?
<removed by moderator>
Edited by: Thomas Zloch on Aug 10, 2011 12:01 PM

go to the standard text > change editor > select PC editor
now you can put an HTML TAG
<br>
<input type="checkbox" name="option1" value="Milk"> Milk
<br>
I can see the check box in SAP, but not in OUTLOOK... not sure whether we an issue with SAP or OUTLOOK or we entirely look in different way..

How to create a voice mail password if you did not do it when you bought the phone?

I did not create a password for my voice mail when I bought the phone. How can you do it now since I ignored the prompt when I first tapped voice mail?

YOu will have to contact your cell provider to get the password, voicemail is a carrier feature.

How to create a new mail db

Hi,
I want to change to lacation of my mails. Currently the database and the users account are on one Firewire drive (external). I want to create a new database on another disk. I don't care about moving the old one. Just want to create a new one.
I know I must change settings in Server Admin, but before setting the new path I need to create all folders.
Can someone tell me how to do it ?
Thanks,

Your question was about a creating a new one not about moving it. You explicitely said you do not care about the existing one. So yes, SA will do it for you.
If you move a database by copying it, permissions can get lost and must be recreated manually.
So these are two different issues.
Just for my knowledge, what happens if hard disk
names contains space ?
Spaces in drive/directory/file names need to be escaped inside scripts/programs. Most of the time nothing happens, but sooner or later you may come across something that breaks your mail system. So it is a good and simple precaution not to use spaces at all. (mail partitions for example can sometimes cause issues)
Alex

Visual composer how can i populate data in backend from front end.

Hi Guru's
I have designed a basic screen using zbapi_salesorder_getlist. I have requirement in which i have to enter some details in the output screen, it then should come back to back end and update a Ztable.
For this i have created and deployed till intial output screen(i will enter some values in the input and i get some result in the output----> i ma using a RFC to get the data from backend) in the output the user enters some values which needs to updated a ztable in the back end. Give ur inputs how can this be done any link if possible so that i can complete this concept.

Thanks Marcel,
I am working on your blog example.
Nutan,
3.> Then for updating backend. You just drag and drop the second bapi in your model and then create the forms as per your requirement. This will be helpful.
can u please elaborate, what ever input i am giving is not coming to the back-end. Any sample example will help me to solve this. what ever you have mentioned in step 1 and step 2 are working properly, but i am not able to get past afer the two steps.

How to create a new Mail account for Google Enterprise Gmail

I have just set up Google Enterprise Business Apps, including Gmail. Works just fine with my domain from iPhone and from Google Web App.
I have set up a new Mac Mail account and can receive email addressed to my my domain and not gmail.com just fine but when I send mail the FROM: field has [email protected] instead of mydomain name.
I've tried getting help from Google but it's a slow, somewhat trying process.
Any solutions?
Thanks, Donald

NamibGuy wrote:
Ok thanks I see the gear!
I checked and the return address (from:) is already correctly set up.
The Google Enterprise Gmail works just fine with my iPhone and from the Google web app. PC with Outlook fine too. I suspect that there must be something about the MAC Mail account setup.
I just don't know where to look...
If that is your issue then
In Mac Mail>>Preferences>Accounts>>Account Information
You can add "from" options by adding them to email address line, seperate by comma.
This will give you a "drop-down" menu in composing new mail or replying.

Visual composer How to create an e-mail

Similar Messages

Maybe you are looking for