Visual Composer + WAS 6.40 Stack 14

Hello everybody,
i have heared that with stack 14 of SAP NW 2004 a Visual Composer Server doesnt need a standalone IIS-Webserver anymore and will be integrated within the WAS. Anyone has more infos on that?
regards,
Markus

https://www.sdn.sap.com/irj/sdn/webinar?rid=/library/uuid/65984d16-0401-0010-419a-cd190812a128
In that page u found a PDF that name the VC6.0 and the new one that will not have to use ISS, support FLEX, etc this VC they called VC Netweaver 2004 and according with the PDF can be used with EP60, I dont know if this version VC04 never came out and SAP decided directly get out the VC04s version. From what I know one of our client buy the license of NetWeaver 2004 and for what I can see the VC that cames with this version is the VC6.0, pls correct me if I wrong.
What I really care is knowing the fact that VC04s (the version that will get out very soon) can we used or not in a portal EP6 and in the case that can run find out if there is some limitations.
thx

Similar Messages

  • Where do I get a copy of Visual Composer??

    Hi,
    Pls where can I get a copy of Visual Composer [VC]??
    It is not available for download from the SAP website.
    I wanted to create an EAI solution for demonstration purposes using VC, but I read it is not possible to connect to non-SAP systems using the Visual Composer?
    So it is no use for what I want.
    Regards
    Sean

    Hi Sean,
    Visual Composer was not yet released in an unrestricted shipment release, therefore it is still not available for download. It is planned to happen in the third quarter of 2004 (Probably September).
    This version will support not only SAP data sources but also JDBC and Siebel (with more third parties to come in the future).
    If you need more details about the product and timelines please contact [email protected] .
    Best regards,
    Yaniv.

  • Does Visual composer requires enterprise portal installation?

    Hi all,
    Does Visual composer requires enterprise portal installation?
    or can it be installed standalone and used standalone.
    Also does Visual composer reuires BI-JAVA stack,
    or can it run on BI-ABAP stack also
    Thanks all,
    Regards,
    Robert

    Hi ,
    Thx Markus,
    one more question...
    Is VC a stand alone application/package by itself that does not require EP or does it come with EP.
    Thanq.
    Regards,
    Robert.

  • Visual Composer + NW04 SP Stack 14

    Hello,
    Has anyone install the latest release of VC? It was supposed to be in NW04 SP Stack 14. However, I am not able to locate the software. I read that it was available as addon to EP, does it mean we have to upgrade portal to stack 14 and VC will be installed as well? Or has the new VC release been delayed?
    Thanks,
    - Wee

    Mario,
    In one of your previous posts (see Visual Composer with Macromedia Flex) you've said it will be available with SP14. But now we see that it will only be available to some pilot customers. If it is a part of SP14, how can it be provided seperately to some pilot customers ?
    Regards
    Ahmet

  • No Visual Composer server was found at specified address

    After installing VC server and a restart of the Portal system, I can not connect to the VC server.
    I was able to connect before the restart, create a model, deploy and test it.
    I looked at Vis admin and the components are running. I also tried to stop the client, server components but I get the same error.
    Any suggestions?
    Thanks

    Hi ,
    Check the belwo thread.
    its olves ur problem.
    Fatal error: No Visual Composer Server was found at specified address....
    Regards,
    Govindu

  • Visual Composer 6.0 Patch2 on EP60 SP7 WAS 6.40 SP8

    Hello,
    I am trying to test visual composer for some of our developemnts. I have installed Visual composer 6.0 Patch2 and am able to connect to the CRM systems using the Portal framework. The iview created in the VC works in preview mode in VC workbench (means, it retrieves and displays data). When it is deployed in the portal, I am able to see only the input form. The output form is not executed when 'submit' is pressed.
    Does anyone have any similar xperience or any clues?
    - Arun

    Hi,
    This is the message I get in the trace file when I press 'Submit' on the input form of the iview. Instead of showing the output table, there is nothing displayed... But, the trce file is populated with:
    #1.5#000F20191F04003F00000655000050370003EAD6217670E5#1102630335442#com.sap.portal.portal#sap.com/irj#com.sap.portal.portal#arunkumar#418####62217b204a2f11d992b6000f20191f04#SAPEngine_Application_Thread[impl:3]_37##0#0#Info##Plain###UserAgentHook: component
    com.autogen.guimachine_1207165535.AAD7A supports (MSIE, >=5.5, *) (Netscape, *, ) (Mozilla,,*)and doesn't support #
    #1.5#000F20191F04003F00000656000050370003EAD62176C132#1102630335463#com.sap.portal.portal#sap.com/irj#com.sap.portal.portal#arunkumar#418####62217b204a2f11d992b6000f20191f04#SAPEngine_Application_Thread[impl:3]_37##0#0#Info##Plain###------PRT AbstractPortalComponent: calling doContent for portal component:  com.autogen.guimachine_1207165535.AAD7A#

  • Adding Visual Composer to NetWeaver PI

    As far as I could see NetWeaver PI doesnu2019t contain Visual Composer. Is there a way to add it manually or is a NetWeaver CE instance required if I need VC?
    Regards,
    Tarik

    Thank you for the answer. Sorry, if I didnu2019t quite understand, Iu2019me new to SAP and NetWeaver. Maybe I was not clear enough in my first post. NetWeaver PI and NetWeaver CE 7.1 both seem to be based on NetWeaver 7.1, and CE contains Visual Composer  7.1. As far as I understand, the problem is that the component simply is u201Cnot installedu201D in PI and not that PI woudnu2019t meet the requirements for VC. But I couldnu2019t find instructions on how to install the u201CVC componentu201D in PI, nor could I find a download of VC as a separate component. All downloads which i could find seem to contain a complete NetWeaver CE or 7.0 Stack. Now my question is, whether there is a u201CVC componentu201D which can be installed in PI.
    Thanks,
    Tarik
    Edited by: Tarik Osman on Aug 27, 2008 11:12 AM

  • Eventing in Visual Composer 7.1 Enhancement Package 1

    We are running Enhancment Package 1 on 7.1 and the release note says that client side event is supported.  However I build 2 iViews one with Data Entry text iput and and a signal out and the the sencond one with a signal in and a text field.  I cannot get what I type in to the first iView to pass to the second.  Is there a simple example that illustrates that eventing is working in this release.

    I used the non WEB Dynpro event tested with the following results.
    For an iView that I had build with Visual Composer 7.0 and converted using the CE 7.1.1 converter tool I now see the following. In this case the evnt had the prefix urn: on it
    10:20:12 : urn:com.osisoft.pct.RtPM, AdhocTags, %3CParamsversion%3D%223%22%3E%3CRowParamname%3D%22%5C%5Cgsrtwebparts%5Ccdt158%22%2F%3E%3C%2FParams%3E, undefined
    This same iView on Visual Composer 7.0 delivered the following message using the tool in EP 7.0
    10:52:46 : urn:com.osisoft.pct.RtPM, AdhocTags, <Params><param name="Paramname" value="%5C%5Cgsrtwebparts%5Ccdt158"/></Params>, undefined
    For an iView that I created new with Visual Composer 7.1.1 and tried to use the same tool the tool did not catch the event and nothing was displayed in the log when the event name had urn: on it.
    I rebuilt and removed the urn: and now the tool picked up the event with the following log.
    11:12:29 : urn:com.osisoft.pct.RtPM, AdhocTags, %3CParamsversion%3D%223%22%3E%3CRowParamname%3D%22%5C%5Cgsrtwebparts%5Ccdt158%22%2F%3E%3C%2FParams%3E, undefined
    The XML has changed and the use of urn: is inconsistent between versions.
    Thanks for pointing me to this tool.
    The Web Dynpro version you suggest did not show anything so that is why I tried the non-WebDynpro.
    Gretchen

  • Visual Composer 7.0 and LoadRunner VueGen

    Has anyone been able to make Visual Composer 7.0 work with Vuegen (v8.1 FP3)? Running on NW04s SPS10 J2EE and Portal. The model is rather simple it executes an ABAP BAPI and returns Exchange rate data. Works great in the browser with no issue.
    VueGen receives the data (seen in the playback), but then has a fatal issue, with message = Fatal Communications error, cannot retrieve the data. The https is definitely working Ethereal proves that. VueGen always works a little differently than the IE6 browser based on Ethereal (that's a mystery).
    Anyway, I am guessing that the Web-HTML and Web-SAP Protocols simply cannot handle the Flash bytecode that is streamed back to the Vuegen process. It must be trying to do something with it, and failing.
    Any ideas or success stories with Visual Composer 7 / Flash (not WebDynPro), and Vuegen would be greatly appreciated? And if you are about to try it , good luck.

    Hi Frank,
    From what I understand you are talking about recording Flex applications and not VC design time, right?
    If so, I do remember having some problem with VUGen. I think that what helped me was using the option of using the old recording engine. This can be set in VUGen-> Recording Options->Advances->Recording Engine.
    Also, I don't think you need the SAP-WEB, just use the Regular Web-HTTP.
    After you record should see web_custom_request going to "com.sap.visualcomposer.vcbroker". I would put some web_reg_find before these requests and supply some expected returned data to search for.
    Best Regards,
    Noam

  • Visual Composer 7.0 roadmap

    Hello experts,
    We have NetWeaver EP 7.0 installed with Visual Composer in our C&B and DEV environment. We haven't started developing with it yet.
    My questions to you is:
    What is the future of Visual Composer 7.0?
    My understanding is that SAP has put a lot of energy integrating Visual Composer into CE 7.1. This new version has significant changes compare to it's predecessor. Visual Composer for CE 7.1 seems to be the way to go if one needs to create applications based on existing data services. In short terms, both versions will coexist. Bbut in long terms...?
    Can anyone help me find the Visual Composer roadmap?
    Thanks a lot for your help,
    Nathalie

    Hi,
    This is a quote from the Visual Composer main page on SDN: (/people/jarrod.williams/blog/2009/09/14/whats-new-in-visual-composer)
    "_Visual Composer 7.0_
    In light of the progress made relating to parity between Visual Composer 7.0 and Visual Composer CE, our investment in Visual Composer 7.0 will be limited to maintenance after the release of enhancement package 2 for SAP NetWeaver 7.0. We are confident that with the provisions made for migration to Visual Composer 7.1 enhancement package 1 or Visual Composer 7.2 and the great feature set in Visual Composer for enhancement package 2 for SAP NetWeaver 7.0, our existing customers running Visual Composer 7.0 will enjoy the best of both worlds: the option to upgrade to Visual Composer 7.2 or to stay with the latest release of Visual Composer 7.0."
    I'll stress the last part, though VC on CE is a great version, staying with the latest release of Visual Composer 7.0 is also good, depending on your needs of course, for instance - the attractive Flash runtime which is currently exclisive for VC 7.0, the "Flash Components" feature that was entered on SP5 of 7.01 (and in 7.02) , which enables you to consume custom 3rd party flash components or Xcelsius controls inside Visual Composer,, which makes flash black-boxes easier to consume than in CE, .. etc..
    still - VC on CE of course has it's own advantages - the ability to consume clustered services, life-cycle management, it's intergration with the other CE components etc..
    and so if you'll find that VC 7.0 is not enough, you could always upgrade and migrate to the CE versions (7.1 or 7.2).
    bottom line - it's a win win situation.

  • Nested Tables in Visual Composer 7.0

    Gurus,
    When I am trying to drag and drop the webservice in the Iview it gives a warning message "Port 'Salesorder' was omitted because it includes nested tables which are not presently supported by Visual Composer" . My question is how to use this webservice which has nested table in one of the input port. Is there any work around or can you suggest me any other way we can call this webservice "ECC_SalesOrderCTRC1".

    Hi,
    Nested tables are not supported by this version of VC.
    This is an architectural problem and I don't know of any work around for it (other than changing the WS).
    Nested tables are and will be supported in VC CE (7.1).
    Regards,
    Shay

  • Flash Components in Visual Composer 7.0 - TechEd 2009 Demo

    Watch this Demo in order to see how easy is it to embed cool controls into Visual Composer 7.0
    in this case, we are embeding Gauges, an Interactive European Map and an iPhone style CoverFlow control.
    http://www.youtube.com/watch?v=RJ0Tq-3vK6w

    Hi Amir
    I was wondering how I could get hold of the gauge control used in the video. It's not one of the Xcelcius ones provided in your PDF.
    Thanks
    Glenn Ingham

  • How to connect two iviews in Visual Composer 2004s?

    Hi,
       I am trying a sample application (Bank Details) in Visual Composer(Netweaver 2004s) but getting a warning as "Event EVT1 is declared but cannot be raised". Actually I want to show the GetList values in the first iview & GetDetil values in the second iview. I have done everything for the two iviews, but not able to connect the two iviews.I tried to drag from Signal Out of the first iview to Signal In of the second iview, but not able to connect them.
    Hope someone can suggest a solution.
    Regards
    Shemim

    Hi
    Sorry for the mistake.
    Please refer this:-
    Re: How can I transfer data form one data store to another iview /dats store
    Re: Popup communicating with multiple iviews (layers)
    Regards
    Navneet
    null
    Message was edited by:
            Navneet Giria

  • How to change front color in Visual composer

    Dear friend,
    i am taking numerical expression box into visual composer table view
    and try to change the front color in style tab for that field property
    but front color is  not changing in output(back ground color is changing ).
    how to change front color in visual composer?
    and can we change the symbol color too?
    thanks and regards,
    dushyant.

    Hi Vani!
    1. Unfortunately one of my requirements is that I can only get data from queries and not from Web Services or other sources, so no WS calling would be allowed in my deployed I-View, but thanks anyway for your suggestion.
    2. You are right, I was not clear enough in my first post. Let's say I have 3 rows and 12 columns, what I want is the following:
    ROW3 = ROW1 / ROW2
    obviously for each column. Do you have an idea about how it could be done??
    Thanks a lot,
    Andrea

  • Error in deploying Visual Composer model

    Hi experts.
    We recently got problems with deploying our visual composer applications. It has worked well before. The compilation excecutes perfectly, but when the deployment starts I get the error:
    "Error in executing a process for Flex compilation, Resource temporarily unavailable"
    From the portal log:
    path 2008-03-13 11:49:57:366 Caught java.io.IOException: I/O error
    at java.io.FileOutputStream.writeBytes(Native Method)
    at java.io.FileOutputStream.write(FileOutputStream.java:260)...
    path 2008-03-13 11:49:43:887 Caught java.io.IOException: I/O error
    at java.io.FileOutputStream.writeBytes(Native Method)
    at java.io.FileOutputStream.write(FileOutputStream.java:260)...
    warning 2008-03-13 11:49:43:886 Unexcepted error occured on /System/HttpAccess/Access!
    /System/Logging com.sap.tc.logging.APILogger.LogController[logIntT(...)] n/a
    Full Message Text
    Unexcepted error occured on /System/HttpAccess/Access!
    error 2008-03-13 11:49:43:885 Error in model compilation (Flex)
    /System/Server com.sap.portal.vc.connector sap.com/irj vm-papp03p Server 0 1_92376
    Full Message Text
    Error in model compilation (Flex)
    Any help on this one?
    Regards
    Øyvind

    Hi,
    Thank you. But the problem was resolved after a restart of the application server. We also had some other issues after a disk crash.
    Øyvind

Maybe you are looking for