Visual Design view in JDeveloper doesn't work

before it worked fine ,
.... my friend gave me his code in UIX , i try to see the design from the visual design view , but I got surprised that that the design view didn't response .
so could you please give the suggested solutions for this problems..
Regards

It would be helpful is you actually supply an error message or the actual UIX code that you are using.
Also - how about openning a TAR with Oracle Support?

Similar Messages

Views dropdown on list view web part doesn't work

Thank you very much beforehand for any help with this issue, I really can't figure out what is going on.
So, I have big list (36125 items and about 25 public views there) and view selector on list view web part just stopped respond there couple of days ago. You click on down arrow and nothing happens... There are no any java script errors in browser console,
there are no any errors in ULS log. Profiler shows that request even is not sent to server when you click it to get list of views.
At the same time, this web-part works correctly with other lists on this site.
Do you have any ideas?

Hi,
I understand that the view drop down doesn’t work for a specific list. Can you browse these publish views by manually change the view name in the URL? There are two view drop downs in the ribbon(one under the List tab and one under the browser tab). Are
they all not working?
It is a big list, you need to make sure that there are no more than 5000 items in a single view. Only 8 lookups can be added to a view at the same time. You need to make sure that these thresholds.
For more information about these thresholds, please refer to this site:
Manage lists and libraries with many items:
http://office.microsoft.com/en-us/sharepoint-foundation-help/manage-lists-and-libraries-with-many-items-HA010377496.aspx
Thanks,
Entan Ming
Entan Ming
TechNet Community Support

Visual design view in Studio Enterprise 8

I have recently discovered both Studio Enterprise 8 and Studio Creator, previous to which I was only using netbeans. However, I've been looking for a way to create either JSP applications or standar java applications with an IDE that has a visual design view in it.
Studio Creator has a visual design view only for JSP pages, but it does not seem to have the robustness of Studio Enterprise 8. Studio Enterprise 8 has a Palette tool, but for the life of me I cannot find the visual design view in it. Is there a way to activate a visual design view in Studio Enterprise 8? or, do I need to download an add-on?, or do I really need to create projects in Studio creator to later transfer only the JSP pages to Studio Enterprise?
Any help would be greatly appreaciated.
TGD

Besides the visual designer for JSP (Creator) , Swing GUI and UML (JSE8), what other types of visual designers are you expecting or wish for in JSE 8?

Legend Calendar view of VC doesn't work

Hello,
I have created a model which returning start date and end date of planned maintenance dates. I can show these dates in calendar view but when I try to add legend to this calendar not only I am not able to see any legend but also calendar is also empty, all dates are gone.
But when I remove all legends the calendar shows all dates in the same color.
I tried to find an answer for this issue on SDN and google but except 2 [not answered question |Visual Composer Calendar;on SDN, Couldn't find any usefull answer.
I also reviewed these:
http://help.sap.com/saphelp_gts72/helpdata/de/43/eca4ef15b22ae6e10000000a422035/content.htm
http://help.sap.com/saphelp_rc10/helpdata/en/43/eeb0b2a3597062e10000000a1553f6/content.htm
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/9326072e-0c01-0010-bc97-f72e93338101?QuickLink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/63f2052e-0c01-0010-b9a2-e1f7457a7fbe?QuickLink=index&overridelayout=true
It is very simple but it doesn't work!!!
these are my settings;
from date field = @Begda
to date field = @endda
Calendar range = Auto
Legend placement = Below (not able to change)
legend filtering = filter
dynamic legend = not selected
legend ID field = when dynamic legend is not selected this field is disabled
the Table for legend:
= 0
Label = ABC
Color = #339966
Condition = @SYSID=='ABC'
I really can't figure this out!    your help will be highly appreciated
Thanks.

Your description is a bit sketchy, however a few thoughts (might actually start with step 4).
1) make sure your cfm files and project is set up to be under your ColdFusion9 wwwroot. So, on windows, if your project was called test, the correct folder would be c:\ColdFusion9\wwwroot\test, with the .cfm files under that directory.
2) make sure you can bring up the ColdFusion9 administrator panel. Under Servers, right-click the server you setup, and do "launch ColdFusion Administrator". Make sure your local server is setup with the right passwords.
3) check your project properties (right click on your project, select properties), and here make sure your project is referencing the server. From there you should be able to switch from the Source|Firefox|IE tabs (that's what I have on Windows), and something should show up. Also, when you run the .cfm file in an external browser.
4) Step 1, however, should be verifyable OUTSIDE of CF Builder, with a path something like:
     http://localhost:8500/project-directory-name/example.cfm file
Also of course make sure that http://localhost:8500/CFIDE does something.   That should tie it altogether, since when you do a launch/run from CF Builder, you can compare the address it puts in your browser, with the aforementioned addresses.
Let us know what was wrong, so others can use your post.

Empty JSF Design view in JDeveloper 11g

Hello,
I m newbie in ADF.
JDeveloper version 11.1.2.2.0.
Fusion Web Application project.
After some developing time all my JSF Design view became empty. When I click on that empty surface there some exception raises:
oracle.bali.xml.share.WeakListenerManager:Sep 20, 2012 7:07:53 PM oracle.bali.xml.share.WeakListenerManager addListener
WARNING: Tried to add listener that was already attached: listener=oracle.jdevimpl.webapp.grammar.DelegatingGrammarProvider$IdenticalGrammarEventPercolator@17359cbsource=oracle.jdevimpl.webapp.facelets.libraries.FaceletsLibraryMetadataGrammarProvider@820671
oracle.jps.common:Sep 20, 2012 7:08:00 PM oracle.security.jps.internal.common.util.StrictValidationEventHandler handleEvent
WARNING: Failed to validate the xml content. SchemaLocation: schemaLocation value = 'http://xmlns.oracle.com/oracleas/schema/11/jps-config-11_1.xsd' must have even number of URI's. Location: unavailable.
oracle.jps.common:Sep 20, 2012 7:08:00 PM oracle.security.jps.internal.common.util.StrictValidationEventHandler handleEvent
WARNING: Failed to validate the xml content. SchemaLocation: schemaLocation value = 'http://xmlns.oracle.com/oracleas/schema/11/jps-config-11_1.xsd' must have even number of URI's. Location: unavailable.
java.lang.IllegalArgumentException: can't create position before or after oracle.xml.parser.v2.XMLDocument@bab945
java.lang.IllegalArgumentException: can't create position before or after oracle.xml.parser.v2.XMLDocument@bab945
o.bali.xml.dom.position.DomPosition.<init>(DomPosition.java:832)
o.bali.xml.dom.position.DomPosition.<init>(DomPosition.java:74)
And nothing else more..
I have reinstalled my JDeveloper, clean AppData JDeveloper. And still nothing solved. Other Demo Oracle project works fun.
Pls, help me.
Sorry for my English.

A have solved my problem after droping:
<context-param>
<description>Security precaution to prevent clickjacking: bust frames if the ancestor window domain(protocol, host, and port) and the frame domain are different. Another options for this parameter are always and never.</description>
<param-name>oracle.adf.view.rich.security.FRAME_BUSTING</param-name>
<param-value>differentDomain</param-value>
</context-param>
from web xml.

Fan View in Stack doesn't work

I'm enjoying the new Leopard features. However, suddenly when I put a folder in the dock to use as a "stack" the FAN view doesn't work. I just get a fan of dumb-looking lines. The grid view works. What gives?
Many thanks,
Tom

Glad to hear that. Sometimes preference files get corrupted, it happens. If you lost application icons from the Dock it's because they probably were 3rd party software, OR, the icons that aren't on the Dock by default in Leopard.
Nada! and thank you for the star.
Carolyn

In design view the cursor doesn't display correctly with text how to fix

When working in the design view in a text block the cursor shows in one spot but the code view show it is over a few characters so you have a real hard time editing text in that mode. How do you fix this. I have had this issue in several version of DW I am in 5 now.

I don't have this problem.
Which OS are you on?
Does this happen with all your sites or just one?
Are you working with valid HTML and CSS code?
CSS - http://jigsaw.w3.org/css-validator/
HTML - http://validator.w3.org/
Can you post a link to a page in which this occurs?
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Xcelsius/Dashboard Design - mouse over capability doesn't work/losing hover

Hello there, I am currently in a tough situation. If any Xcelsius gurus can provide me with a solution, I would very much appreciate your help.
I currently have a dashboard with pie chart component in the default view. It has a radio button with two values. The mouse over doesn't work when the dashboard is loaded. However, when I make a selection in the radio button, the mouse over works for both the options. I have noticed this is a bug but if anyone has a solution or way around it, let me know.
Another issue - I have a 'All' view and 'Region' views in the menu bar. When a user clicks on a particular Region, then clicks all and goes back to a region, I lose the drill down capability on the pie chart thats on the Region view. initially, the mouse over and drill down works fine. However, after going to the All view and coming back to a region, this capability is lost. It acts the same way as the problem above. User can't hover nor drill down. If anyone has a solution to this, let me know.

FYI this is the article on the main forum page:
Announcement: New to Spry, or the Spry forums?
Hide Details
Before you post a topic please verify that:
You are using the latest Spry files
The latest version of the Adobe Spry Framework is 1.6.1, this is the same version that ships with Dreamweaver CS4. If you use Dreamweaver CS3 (uses Spry 1.4), its wise to upgrade your files to the latest version. This can easily be done using the Spry Updater that can be found here.
After that we will have a look at your code.
Ben

The list view in Calendar doesn't work

iPhone 3Gs with iOS 4 now can't to show the list mode view correctly in the Calendar. It mixes all meetings and lost any also. When I look with month or day mode it works correct, so I think it is not problem of my calendar data it is problem of this mode, it is a little bug of new firmware.

http://discussions.apple.com/message.jspa?messageID=11749750#11749750

Update methode in model-view-controller-pattern doesn't work!

I'm writing a program in Java which contains several classes. It must be possible to produce an array random which contains Human-objects and the Humans all have a date. In the program it must be possible to set the length of the array (the number of humans to be produced) and the age of the humans. In Dutch you can see this where is written: Aantal mensen (amount of humans) and 'Maximum leeftijd' (Maximum age). Here you can find an image of the graphical user interface: http://1.bp.blogspot.com/_-b63cYMGvdM/SUb2Y62xRWI/AAAAAAAAB1A/05RLjfzUMXI/s1600-h/straightselectiondemo.JPG
The problem I get is that use the model-view-controller-pattern. So I have a model which contains several methodes and this is written in a class which inherits form Observable. One methode is observed and this method is called 'produceerRandomArray()' (This means: produce random array). This method contains the following code:
public void produceerMensArray() throws NegativeValueException{
     this.modelmens = Mens.getRandomMensen(this.getAantalMensen(), this.getOuderdom());
for (int i = 0; i < this.modelmens.length; i++) {
          System.out.println(this.modelmens.toString());
this.setChanged();
this.notifyObservers();
Notice the methods setChanged() and notifyObservers. In the MVC-patterns, these methods are used because they keep an eye on what's happening in this class. If this method is called, the Observers will notice it.
So I have a button with the text 'Genereer' as you can see on the image. If you click on the button it should generate at random an array. I wrote a controller with the following code:
package kristofvanhooymissen.sorteren;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
/**Klasse GenereerListener.
* @author Kristof Van Hooymissen
public class GenereerController implements ActionListener {
     protected StraightSelectionModel model;
     /**Constructor.
     *@param model Een instantie van het model wordt aan de constructor meegegeven.
     public GenereerController(StraightSelectionModel model) {
          this.model = model;
     /**Methode uit de interface ActionListener.
     * Bevat code om de toepassing te sluiten.
     public void actionPerformed(ActionEvent arg0) {
     this.model=new StraightSelectionModel();
     try{
     this.model.produceerMensArray();
     } catch (NegativeValueException e){
          System.out.println("U gaf een negatieve waarde in!");
     this.model.setAantalMensen((Integer)NumberSpinnerPanel.mensen.getValue());
     this.model.setOuderdom((Integer)NumberSpinnerPanel.leeftijd.getValue());
StraighSelectionModel is of course my model class. Nevermind the methods setAantalMensen and setOuderdom. They are used to set the length of the array of human-objects and their age.
Okay. If I click the button my observers will notice it because of the setChanged and notifyObservers-methods. An update-methode in a class which implements Observer.
This method contains the follow code:
public void update(Observable arg0,Object arg1){
          System.out.println("Update-methode");
          Mens[] temp=this.model.getMensArray();
          for (int i = 0; i < temp.length; i++) {
               OnbehandeldeLijst.setTextArea(temp[i].toString()+"\n");
This method should get the method out of the model-class, because the produceerRandomArray()-methode which has been called by clicking on the button will save the produce array in the model-class. The method getMensArray will put it back here in the object named temp which is an array of Mens-objects (Human-objects). Then aftwards the array should be put in the textarea of the unsorted list as you could see left on the screen on the image.
Notice that in the beginning of this method there is a System.out.println-command to print to the screen as a test that the update-method has been called.
The problem is that this update method won't work. My Observable class should notice that something happened with the setChanged() and notifyObservers()-methods, and after this the update class in the classes which implement Observer should me executed. But nothing happenens. My controllers works, the method in the model (produceerRandomArray() -- produce random array) has been executed, but my update-method won't work.
Does anyone has an explanation for this? I have to get this done for my exam an the 5th of january, so everything that could help me would be nice.
Thanks a lot,
Kristo

This was driving me nuts, I put in a larger SSD today going from a 120GB to a 240GB and blew away my Windows Partition to make the process easier to expand OS X, etc. After installing windows again the only thing in device manager that wouldn't load was the Bluetooh USB Host Controller. Tried every package in Bootcamp for version 4.0.4033 and 5.0.5033 and no luck.
Finally came across this site:
http://ron.dotsch.org/2011/11/how-to-get-bluetooth-to-work-in-parallels-windows- 7-64-bit-and-os-x-10-7-lion/
1) Basically Right click the Device in Device manager, Go to Properties, Select Details tab, Choose Hardware ids from Property Drop down.   Copy the shortest Value, his was USB\VID_05AC&PID_8218
2) Find your bootcamp drivers and under bootcamp/drivers/apple/x64 copy AppleBluetoothInstaller64 to a folder on your desktop and unzip it. I use winrar to Extract to the same folder.
3) Find the files that got extracted/unzipped and open the file with notepad called AppleBT64.inf
4) Look for the following lines:
; for Windows 7 only
[Apple.NTamd64.6.1]
; No action
; OS will load in-box driver.
Get rid of the last two lines the following:
; No action
; OS will load in-box driver.
And add this line, paste your numbers in you got earlier for USB\VID_05ac&PID_8218:
Apple Built-in Bluetooth=AppleBt, USB\VID_05ac&PID_8218
So in the end it should look like the following:
; for Windows 7 only
[Apple.NTamd64.6.1]
Apple Built-in Bluetooth=AppleBt, USB\VID_05ac&PID_8218
5) Save the changes
6) Select Update the driver for the Bluetooth device in device manager and point it to the folder with the extracted/unzipped files and it should install the Bluetooth drivers then.
Updated:
Just found this link as well that does the same thing:
http://kb.parallels.com/en/113274

FCP X Trial version - Contour Design Shuttle Pro 2 doesn't work

I use an iMac with OS X 10.8.4 and the trial version of FCP X, which expires in a few days.
I simply cannot get my shuttle - which worked perfectly with FCP Express - to work with FCP X.
I uninstalled and installed v3.0 several times, it is there (I can see it in the preferences and the buttons react), but FCP doesn't react at all.
I tried settings "Final Cut Pro X" and "Final Cut Pro X alt"
I also tried to connect the shuttle directly to the computer, via connector on the keyboard and via hub - nothing works.
I am at a loss.
Would anybody please help?
Thanks a lot from Mannheim, Germany
Sir Torsten

Hi Torsten,
there's a seperate driver setting for the demo version which works fine on my system.
You find it at forums.contourdesign.com/viewtopic.php?f=9&t=3478
Greeting from Hessen
ZobRombie

Explorer on PC viewing iweb creations doesn't work?

Anyone surfed/tested their iweb creations on a PC with explorer?
My iweb test page with movies does not fully load or scroll on the wife's PC with explorer. Works great in Safari on all my macs.

Anyone surfed/tested their iweb creations on a PC
with explorer?
My iweb test page with movies does not fully load or
scroll on the wife's PC with explorer. Works great in
Safari on all my macs.
Hi sharkguy - Good point!
Stats to Remember when designing websites:
1. less than 4% of internet surfers use some version of Mac OS
2. less than 7% of all internet surfers use Firefox as a browser of choice
3. less than 3% of all internet surfers use Safari as a browser of choice
4. at least 85% of all internet surfers use some version of Internet Explorer
5. Netscape, Opera, and Mozilla make up the rest of browsers used
Best wishes on your project, Rick
iMac G5 iSight 20" - 30G iPOD - HP Pav 15" WS and Toshiba Sat 17" WS Mac OS X (10.4.6) Canon 20D & A620

Installlatest flash-says installation sucessful-go back to view video and doesn't work

adobe flash?
install- says sucessful- back to view and syas i must inatsll flash to view?

What is your operating system, version & edition?
What is your web browser?

View in browser doesn't work

I have set up a localhost server on port 8500 for ColdFusion Builder, but when I try to run a simple test of
<cfoutput>#DateFormat(Now)())#
</cfoutput>
and check it in Safari browser, I get a blank page. None of my .cfm pages show up in Builder. What's wrong?
Thanks,
Tedra

Your description is a bit sketchy, however a few thoughts (might actually start with step 4).
1) make sure your cfm files and project is set up to be under your ColdFusion9 wwwroot. So, on windows, if your project was called test, the correct folder would be c:\ColdFusion9\wwwroot\test, with the .cfm files under that directory.
2) make sure you can bring up the ColdFusion9 administrator panel. Under Servers, right-click the server you setup, and do "launch ColdFusion Administrator". Make sure your local server is setup with the right passwords.
3) check your project properties (right click on your project, select properties), and here make sure your project is referencing the server. From there you should be able to switch from the Source|Firefox|IE tabs (that's what I have on Windows), and something should show up. Also, when you run the .cfm file in an external browser.
4) Step 1, however, should be verifyable OUTSIDE of CF Builder, with a path something like:
http://localhost:8500/project-directory-name/example.cfm file
Also of course make sure that http://localhost:8500/CFIDE does something. That should tie it altogether, since when you do a launch/run from CF Builder, you can compare the address it puts in your browser, with the aforementioned addresses.
Let us know what was wrong, so others can use your post.

Design View doesn't work on fresh cs5 install

I just bought CS5 web premium and installed all of the programs. For some reason design view in Dreamweaver doesn't work for any of my sites. It's just a grey background. I can work in code view, but I can't do anything with the design view, it's just a grey dead pannel. I had installed the trial version last month and it worked perfectly which is why I bought the full version. I uninstalled the trial version of Dreamweaver CS5 and installed the new CS5 and now the design view is dead. I tried reinstalling CS5 again but Design View is still dead. Any ideas?
Thanks,
DC

Hi DC,
I read you post, and now I wondering If you could help me with my problem.
I also recently purchased CS5 web premium and are having problems with the Preview option.
If you are using a local server for testing purposes, could you please read my posts on this forum:
Have a problem with preview CS5
(it's posted just above your own post)
Many thanks in advance,
Lpre

Visual Design view in JDeveloper doesn't work

Similar Messages

Maybe you are looking for