Visual glitches in exported QuickTime movie (but not in FCP); any ideas?

We shot a short film with a Sony camera (standard def), but it apparently isn't compatible w/ FC Studio software. So we captured and did a rough-cut on my friend's PC rig (Adobe Premiere Pro), burned raw files of our rough cut on to dvd's, then transferred from those discs to my rig. The codec of this footage worked fine in FCP, but wasn't supported by Color. So I used Compressor to convert all referenced files to Apple ProRes 422 (HQ), as it seemed the best conversion I tried (no loss of film quality) and obviously now is supported by Color.
However, the final rendered QuickTime movie (exported from FCP) had some odd visual glitches that occur right before the end of a clip (perhaps 10-15 frames before the end): it's like the brightness or gamma level suddenly drops a noticeable amount right at the end of a clip (again, ~10-15 frames). I couldn't say for sure if it's the last 10-15 frames that are appropriate and the REST of the clip is what's out of whack.
Initially, I thought it was a problem with Color (as these were Color-corrected sequences I was exporting). But I just tried it with a non-color corrected sequence, and the errors are still there.
Any ideas what's going on? Any suggestions/solutions? Did I pick an inappropriate conversion on Compressor?

I think this may be an AVI conversion glitch.
Well I am guessing that from Premiere Pro they came out as AVI? If that is the case well the best thing to do would be to open it with Quicktime Pro and export it as DV/DVCPRO NTSC .MOV
From there you should be able to bring it into FCP without a hitch and then put color down,
But in order to save time I would try first exporting just that last little segment again throwing it into Compressor and see if it comes out okay. It may be that on capture there was some dropped frames on the end so double check that last little bit.

Similar Messages

  • Export Quicktime movie is not rendering video track, just the audio track. However, everything works when using Quicktime Conversion menu options. What is wrong with my setting for Export Quicktime movie?

    Export>Quicktime movie is not rendering video track, just the audio track. However, everything works when using Quicktime Conversion menu options. What is wrong with my setting for Export>Quicktime movie?

    When you converted the original files via MPEG Streamclip, what did you convert them to?
    Have you tried trashing your preferences in FCP? Trashing FCP prefs is usually the first step when FCP is performing strangely.
    Download Preference Manager from Digital Rebellion (free) at:
    http://www.digitalrebellion.com/prefman/
    It will allow you to archive your current preferences if you wish to restore them later.
    MtD

  • I deleted photobooth by accident and i have tried to get it back with the setup disk, i got imovie and garageband back but not photobooth. Any ideas?

    i deleted photobooth by accident and i have tried to get it back with the setup disk, i got imovie and garageband back but not photobooth. Any ideas?

    PhotoBooth is not on the iLife disk which has iMovie and Garage Band.  PhotoBooth is integrated into OSX, so it's not going to be easy to get back.  You'll need to get it from the recovery disk or partition.  Which OSX are you using so we can point you in the right direction.  NEVER delete any of the OSX programs.

  • After lots of different things, it appears that my Airport won't let me download on to my Nook. It used to but not anymore. Any ideas?

    After lots of different things, it appears that my Airport won't let me download on to my Nook. It used to but not anymore. Any ideas?

    Hi Karen,
    The means that iTunes can no longer locate the songs (mp3/m4a) on the hard-drive and as such they won't even play in iTunes, let alone transfer to your iPod.
    Have you recently re-organised your music folders? If you know where these songs are on your hard-drive then you could clear all of the tracks that display the symbol from iTunes and then add them again from their location either through the 'add folders to library' function or by dragging and dropping them diectly into iTunes from Windows Explorer.
    Nik

  • Scratching sounds on Quicktime movie but not on iMovie

    I was wondering why, when I listen to the video on iMovie, does it sound fine but save with these loud scratching noises. There's absolutely no reason for it. It's off a new CD. It doesn't do it when I'm watching on iMovie. But when I save it and open the Quicktime movie there's loud scratching noises... What is that?

    Sorry to make it look like advertisement, but I copied a small part of the video.
    http://s109.photobucket.com/albums/n50/TripPix_2006/Personal/?action=view&curren t=scratches.flv
    It scratches three times, mostly in the second half of the video. I'm not sure if it's because the video is overloaded. It just seems to do this on THIS video and none of my other ones. The size of the iMovie file is 2.62 GB so that might be a reason, but I'm hoping it's something fixable.
    Any help would be great. Thank you.

  • HT4623 I can receive messages but not send them. any ideas?

    I can receive messages but not send any.  any ideas?

    Are you talking about text message or emails?
    http://support.apple.com/kb/ts2755

  • My powerbook g4 (about 6 years old) has just started freezing up--mostly when in Apple Mail, but not always.  Any ideas?

    My powerbook g4 (about 6 years old) has just started freezing up--mostly when I'm in Apple Mail, but not always.  I have been restarting and it seems to work fine.  Any ideas what it might be?  I just repaired permissions.
    thanks!
    Anne

    aflipflopper wrote:
    Yes, it has been running slow.  If I do that will it erase what is stored on the hard drive?
    Thanks,
    Anne
    Tom wants you to run Disk Utility from the install disc and then select your boot volume and then click "Repair Disk" to check and correct any directory problems.  That will not erase any data files on the disc.  If Disk Utility actually makes repairs, do another "Repair Disk" operation, as sometimes one repair will uncover another error.  Stop when it gives the volume a clean bill of health without making any repairs.  Then restart the machine and see how things work.

  • Our web based application allows links to external documents like word- these links work in IE but not in Firefox- any idea why?

    the protocal that works in IE is
    P:\My Documents\2010 Workshops\Nashville Brazeway\Nashville_Workshop_2010.docx
    This drive is shared and opens in IE but Firefox gives msg
    Firefox doesn't know how to open this address, because the protocol (p) isn't associated with any program.

    You need to use the file:// protocol, but you may still encounter problems if you fix that.
    See http://kb.mozillazine.org/Links_to_local_pages_do_not_work

  • I have just added a third iPod touch to our family collection of devices and iTunes won't allow me to add any of the apps to it. I can add songs etc but not apps. Any ideas?

    Just added a third iPod touch to the family collection of devices and it won't allow me to ad apps from iTunes to the device. Can add songs though?

    iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
    iTunes 11 for Windows: Syncing overview
    iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
    If you set up the iPod originally via wifi then this computer is not your syncing computer and thus you can't sync apps from that computer/library.
    To make this your syncing computer:
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

  • TS2580 Only my welcome page published, not the links to the other pages.  My server says they are there, but not showing up, any ideas?  Thanks.

    I developed my web site and published it with myserver.  However only the first page shows up, no other pages, and the links to the other pages are missing on the welcome page.  The host tells me that it is a software problem, that the pages are on the server.  Pleae advise?
    Thank You.

    Rest assured, your pages are there :
    http://www.lynxag.com/Welcome.html
    http://www.lynxag.com/Products.html
    http://www.lynxag.com/Photos.html
    http://www.lynxag.com/Contact_Us.html
    http://www.lynxag.com/feed.xml
    You could have determined the presence of the pages by typing the pagenames in the URL.
    The second option was to connect to the server and see with your own eyes what is there.
    And since you do not use a Sitename in the URL, I assume you uploaded the files yourself instead of letting iWeb do the honours.
    Regarding the Photo page, I do not see any photos on the page. Yet they are on the server too :
    http://www.lynxag.com/Photos_files/Media/
    If you did put the files on the server yourself, verify that you did upload every single file iWeb creates.
    Edit : since the directories are open, you may want to consider closing them. Ask your webhoster to do it for you.

  • My Iphone 5c will pick up wifi in foreign countries but not email! Any ideas what I can do to fix this?

       I can't access my email while in foreign countries although my Iphone 5c will access
    wifi for all other applicatons.How do I fix this?Apple doesn't seem to have the answer>

    My daughter's 4S did this after Apple replaced the back.
    There's a clear piece of plastic in there was not seated correctly and the flash was popping back into the lens.
    Apple store just took the back of and reset the piece where it's supposed to go. Took about 2 minutes.
    Take it to an Apple store.

  • After upgrading to Lion, I can not connect to my NAS drive. I can see it but not connect. Any ideas?

    The drive is a Lacie 4 tb model. 2 (2) tb drives, cofigured raid 0.

    Please follow these instructions:
    Lion: Connecting to legacy (pre-Lion) AFP services - and Mac OS X (server):
    https://discussions.apple.com/thread/3258472

  • "Share Error: Quicktime 0" error message in FCP - any ideas why?

    Getting an error that states "Share Error: Quicktime 0" when using the share function to write to blu-ray. Of course, this comes at about 3 hours into a four hour encode, and of course everything is lost after this completely useless message. I've got the most recent version of QT, all the updates have been added, etc.
    I burned one BD and one BD on DVD with no problems, and nothings changed. I've gotten this error twice in a row now, and rendering for three hours just to get this is beyond annoying.

    See if anything here helps: iPod not recognized correctly on Toshiba laptop

  • Not able to export quicktime movie from Flash CS5 or CS6.

    Hi! I am not able to export quicktime movie from Flash CS5 or CS6. When I export it the progress bar is showing and says Recording Flash content and nothing happens

    I havent exported any videos in the past from Flash. The movie is around 45 seconds and the size is 470KB.
    I tried both, the memory and the hard drive.
    In the attached image you can see the settings and in the other image you can see the progress bar that remains without something to happen.
    I dont mind what type of video to export it can be also .avi but again I have troubles there. It is very large and the animation is distorted.
    The animation consist from two scenes. The first one can be exported without any problem but the second one cannot be exported. May be because it has some masks layers and guide layers?

  • I have 10.0.3, why can I no longer export to vimeo?  also, my quicktime movies are not compressed, they export as the whole file.

    I have 10.0.3, why can I no longer export to vimeo?  also, my quicktime movies are not compressed, they export as the whole file.  this didn't happen before the update.  do i have to now get compressor?  help.

    You should buy Compressor it never fails. It is a must have. I have given up using this buggy Share function and use Compressor all the time.

Maybe you are looking for

  • Instance Variables

    Just out of interest : If I have an instance variable that is an object, should I set it equal to null and then instantiate it in the constructor: class MyClassA{    MyClassB b = null;    MyClassA(){         b = new MyClassB(); OR should I just insta

  • CS3 Tab key all of a sudden is not working but instead removing palettes

    I am working on a long document that came out of Excel. Everything was fine but I have to add an extra tab before the text in the same place in that column. All of sudden, my tab key just gets rid of all my windows/palettes or brings them back and th

  • Software problem??? pls help

    I bought a blackberry curve 8520 hardly 3weeks ago, it hangs every time I play word mole (came pre-loaded) on it. Can someone pls advise what the problem might be???

  • Aperture does not finalize import of new files

    Since the latest upgrade of Aperture version 3.6 i have experienced that when trying to do an import either via connecting the camera or inserting the SD card directly in my iMac, that even though Aperture starts the import and doesn't finalize the i

  • Firefox 7.0.1 stops down load of widevine media transfer

    dish online requires down load of widevine media trans. firefox is stopping download. how do i correct??