Visual Studio 2005 with SP1 for Windows 7 - 64 bit

Hi,
I am trying to install Visual Studio 2005 on a 64-bit platform (Windows 7). The version in about section reads Version 8.0.50727.42
(RTM.050727-4200)
I need to install the Service Pack 1 for Visual Studio 2005 but the installer available is for 32 bit (VS80sp1-KB932232-X86-ENU.exe)
This does not install on 64 bit system.
How do I get Visual Studio 2005 with SP1 installed ?
P.S- On the network I work on, I can see a Windows 2008 (64 bit) system with the version of Visual Studio 2005 that reads Version
8.0.50727.762 (SP.050727-7600) but I dont know how that was installed. Any help would be
appreciated.
Thanks,
Wilson

Hello WillisB,
I think your concern is the name X86 here. Actually Visual Studio is x86 version and we do not have a x64 version Visual Studio. So if you install Visual Studio on X64 version, it is also available. And when you see this page
http://www.microsoft.com/en-hk/download/details.aspx?id=7524 You can see the system requirements:
Supported Operating System
Windows 7; Windows Server 2008; Windows Server 2008 R2; Windows Vista
Processor/RAM:
Vista hardware requirements.
Required Software: licensed copy of a Visual Studio 2005 and Visual Studio 2005 Service Pack 1.
So please don't mind the name x86, the update can still be installed on Win 7 x64.
By the way, to install Visual Studio 2005 on Win 7, please check YiChun's post on this thread:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/f75d8ff2-bed4-473b-bc9c-6faf78c5d83a/installing-visual-studio-2005-pro-on-windows-7-pro-64bit?forum=vssetup
"To apply Visual Studio 2005 on Windows 7, please check the following points step by step:
- Download Visual Studio 2005 SP1 and install it
Visual Studio® 2005 Express Editions Service Pack 1
Visual Studio® 2005 Service Pack 1 for Standard or above edition
- Download
Visual Studio 2005 Service Pack 1 Update for Windows Vista and install it
- When launch Visual Studio 2005, please run it with administrator privileges
(Right-click the icon >> "Run as Administrator")"
By the way, Visual Studio 2005 is out of our mainstream support, what about change to use some new version of VS? For example, Visual Studio 2013 Community version.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

What's up with iTunes for Windows 7 64 bit? Makes my PC run like a 286 on Windows 3.11.

What's up with iTunes for Windows 7 64 bit? So slow and draggy. Makes my high end PC with multi-core processor and video card run like a 286. Even did this after doing a fresh install of the operating system with the latest version of iTunes.
No other software does this on my machine. There has to be some crazy issue causing this.

Try this,
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
Now launch your iTunes and see if it is working now.

Download a Project file for Visual Studio regarding the Kinect for Windows v2? Getting Started with Kinect Development in Visual Studio

I am currently trying to make an application for Kinect for Windows v2 but I am entirely new to Visual Studio and Kinect development and could use some help getting started. I honestly have no idea where or how to start and I figured the easiest thing would
be to obtain a simple project file and examine how it works myself, but I have been unable to find one. The easiest thing would be if I could obtain a project file for Visual Studio that is an application which overlays the Skeletal model over people in real
time, though similar project files would also be appreciated. The app I am making largely involves things similar to overlaying the skeletal model on bodies so this would get me off to a great start and show me how the code is laid out within visual studio
simultaneously. (I would prefer the code to be in C# if that is possible but other languages also work).
I have checked out some of the guides for kinect development but they all assume you know how visual studio works so I cannot get very far in them. Thus if you know of a good guide to get me started with visual stuido AND the Kinect then I would be glad
to here that as well.
Alternatively, and I know this is not the right place for this, I have Matlab, which I know works for the Kinect v1 but can't find support for it regarding the v2, so if you could point me in the right direction on how to get it to work with the Kinect v2
THAT would also work incredibly well as I am much more familiar with Matlab.
I already have Visual Studio Ultimate 2013 installed, as well as the Kinect SDKv2.0, the physical Kinect for Windows v2, and my laptop meets all of the requirements for development so those are not issues.
Thanks in advance for any advice you can give me!

Hi Jicnon,
Thank you for posting in MSND forum.
Since this forum is discuss: Visual Studio WPF/SL Designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System, and Visual Studio Editor. About your issue, I think that it is
more related to the Kinect for Windows v2, so I suggest you can post this issue directly to Kinect for Windows v2 SDK forum:https://social.msdn.microsoft.com/Forums/en-US/home?forum=kinectv2sdk
,maybe you will get better support.
In addition, I find a similar thread about your issue, maybe you will get some useful message.
https://social.msdn.microsoft.com/Forums/en-US/92b23946-53d2-419c-8624-66e6c390617f/information-to-start-project-with-kinect-for-windows-v2?forum=kinectv2sdk
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Fail in installing Visual Studio 2005 Professional Edition in Windows 7

Hi,
I'm new in here. I've just got my Notebook Installed with WIndows 7 Enterprise 32 bit and I would like to install Visual Studio 2005 professional Edition(I've got the installer CD from the MSDN which is purchased in our Company) in my
notebook. There is an issue which often occured, it says:
A problem has been encountered while loading the setup components. Canceling Setup.
I've look up for the solution try lot of things to resolve the issue but no luck until now.
Any idea or experience to help me?
Thanks in advance for the help.

I also add you the log from dd_vserror80.txt :
[09/19/11,17:19:17] MSITOSIT: [2] CRootComponent::SetManager() - MsiGetActiveDatabase returned an invalid handle
[09/19/11,17:19:17] MSITOSIT: [2] ERROR processed; exception was thrown for retail build
Developer Comment: MsiGetActiveDatabase returned an invalid handle
Build Time: Thu Dec 11 15:04:18 2003
DWORD: 0
[09/19/11,17:19:17] setup.exe: [2] ISetupModule::SetManager() failed in ISetupManager::LoadSetupObjectGuid() : vs_setup.dll
[09/19/11,17:19:18] setup.exe: [2] CSetupManager::LoadSetupObjectname() - Failed in call to LoadSetupObjectGuid() for strName: in file: vs_setup.dll
[09/19/11,17:19:18] setup.exe: [0] LoadComponent(), LoadSetupObjectName failure: vs_setup.dll
[09/19/11,17:19:18] setup.exe: [0] LoadComponent failed in ISetupManager::LoadComponentsFromDBObject(): vs_setup.dll
[09/19/11,17:19:18] setup.exe: [2] CSetupManager::LoadDatabaseValues() - Failed in call to LoadComponentsFroMDBObjects()
[09/19/11,17:19:18] setup.exe: [2] CSetupManager::RunIntro() - Failed to Load Database Values
[09/19/11,17:19:50] setup.exe: [2] CSetupManager::RunLoadSetup() - Failed to Run the Intro
the log from dd_vsinstall80.txt :
[09/19/11,17:19:06] Setup.exe:
[09/19/11,17:19:06] Setup.exe: ========== Logging started ==========
[09/19/11,17:19:06] Setup.exe: =====================================
[09/19/11,17:19:06] Setup.exe: GetGlobalCustomProperty({481CEF9F-033A-11D3-ACE2-00C04F8EEBA1})
[09/19/11,17:19:06] Setup.exe: GetGlobalCustomProperty(B51015E7-26A5-4c8f-B871-26ABA9BEFB65)
[09/19/11,17:19:06] Setup.exe: Command line parameters: /LAUNCHER="C:\Users\M162601\AppData\Local\Temp\" /HWND="2821506" /NoExclude
[09/19/11,17:19:06] Setup.exe: entering ISetupManager::RunIntro()
[09/19/11,17:19:06] Setup.exe: LoadSetupDatabase()
[09/19/11,17:19:06] Setup.exe: CSetupManager::LoadSetupDatabase() - set InstalledFrom property to D:\setup
[09/19/11,17:19:06] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:06] Setup.exe: CSetupManager::LoadSuiteInfo() - we are in SP mode - no suiteinfo.dll is supported
[09/19/11,17:19:06] Setup.exe: Product Name:Microsoft Visual Studio 2005
[09/19/11,17:19:06] Setup.exe: ISetupManager::RunIntro() : LoadSuiteRequirements
[09/19/11,17:19:06] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:06] Setup.exe: ISetupManager::RunIntro() : CheckSuiteBlocks
[09/19/11,17:19:06] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:06] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:06] Setup.exe: ISetupManager::RunIntro() : LoadCommandLineMgr
[09/19/11,17:19:06] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:06] Setup.exe: ISetupManager::LoadCommandLineMgr() completed
[09/19/11,17:19:06] Setup.exe: ISetupManager::RunIntro() : LoadSetupLog
[09/19/11,17:19:06] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:06] Setup.exe: ISetupManager::LoadSetupLog() completed
[09/19/11,17:19:06] UTILS::RunNGENAction: Started
[09/19/11,17:19:06] UTILS::RunNGENAction: starting "C:\Windows\Microsoft.NET\Framework\v2.0.50727\ngen.exe queue pause"
[09/19/11,17:19:07] UTILS::RunNGENAction: ngen.exe returned 0
[09/19/11,17:19:07] Setup.exe: ISetupManager::RunIntro() : LoadManagers
[09/19/11,17:19:07] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:07] Setup.exe: inside ISetupManager::LoadUIManager()
[09/19/11,17:19:07] vs70uimgr: Entering InitializeModule() method.
[09/19/11,17:19:07] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:07] Setup.exe: CSetupManager::CopyTempFiles() - Installing setup files...
[09/19/11,17:19:07] Setup.exe: CSetupManager::InstallSetupFiles() starting
[09/19/11,17:19:07] Setup.exe: GetGlobalCustomProperty({39E467CB-8962-4AD8-99F9-864AFF183FD4})
[09/19/11,17:19:07] vs70uimgr: Entering ShowSmallProgress() method.
[09/19/11,17:19:13] Setup.exe: CSetupManager::CopyTempFiles() - Successfuly copied files to temp; rerunning Setup...
[09/19/11,17:19:14] Setup.exe: CSetupManager::CopyTempFiles() - Finished Rerunning Setup...
[09/19/11,17:19:14] Setup.exe: UnloadSuiteComponents()
[09/19/11,17:19:14] UTILS::RunNGENAction: Started
[09/19/11,17:19:14] UTILS::RunNGENAction: starting "C:\Windows\Microsoft.NET\Framework\v2.0.50727\ngen.exe queue continue"
[09/19/11,17:19:14] UTILS::RunNGENAction: ngen.exe returned 0
[09/19/11,17:19:14] Setup.exe: GetGlobalCustomProperty(AA4EEF91-FB37-4135-9B73-484B75DDAA42)
[09/19/11,17:19:14] Setup.exe:
[09/19/11,17:19:14] Setup.exe: ========== Logging started ==========
[09/19/11,17:19:14] Setup.exe: =====================================
[09/19/11,17:19:14] Setup.exe: GetGlobalCustomProperty({481CEF9F-033A-11D3-ACE2-00C04F8EEBA1})
[09/19/11,17:19:14] Setup.exe: GetGlobalCustomProperty(B51015E7-26A5-4c8f-B871-26ABA9BEFB65)
[09/19/11,17:19:14] Setup.exe: Command line parameters: /LAUNCHER="C:\Users\M162601\AppData\Local\Temp\" /HWND="2821506" /NoExclude /CreatedTemp /NoExclude /InstalledFrom D:\setup
[09/19/11,17:19:14] Setup.exe: entering ISetupManager::RunIntro()
[09/19/11,17:19:14] Setup.exe: LoadSetupDatabase()
[09/19/11,17:19:14] Setup.exe: CSetupManager::LoadSetupDatabase() - set InstalledFrom property to C:\Users\M162601\AppData\Local\Temp\SIT41797.tmp
[09/19/11,17:19:14] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:14] Setup.exe: CSetupManager::LoadSuiteInfo() - we are in SP mode - no suiteinfo.dll is supported
[09/19/11,17:19:14] Setup.exe: GetGlobalCustomProperty({1B3F6DC3-205F-11D3-A824-00C04FB1799F})
[09/19/11,17:19:14] Setup.exe: GetGlobalCustomProperty({383F0141-C682-4665-A69B-756E719C968D})
[09/19/11,17:19:14] Setup.exe: Product Name:Microsoft Visual Studio 2005
[09/19/11,17:19:14] Setup.exe: CSetupManager::RunIntro() - Initializing Progress Dialog Thread
[09/19/11,17:19:14] Setup.exe: CSetupManager::RunIntro() - Waiting for Initialization event...
[09/19/11,17:19:14] Setup.exe: CCoreEngine-Proc() - Setting loading init Event...
[09/19/11,17:19:14] Setup.exe: CCoreEngine-Proc() - Finished Setting loading init Event
[09/19/11,17:19:14] Setup.exe: CCoreEngine-Proc() - Entering Main Message Loop...
[09/19/11,17:19:14] Setup.exe: CSetupManager::RunIntro() - Finished Waiting for Initialization event
[09/19/11,17:19:14] Setup.exe: CSetupManager::RunIntro() - Initializing Progress Bar
[09/19/11,17:19:14] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:14] Setup.exe: ISetupManager::RunIntro() : LoadSuiteRequirements
[09/19/11,17:19:14] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:14] Setup.exe: ISetupManager::RunIntro() : CheckSuiteBlocks
[09/19/11,17:19:14] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:14] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:14] Setup.exe: ISetupManager::RunIntro() : LoadCommandLineMgr
[09/19/11,17:19:14] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:14] Setup.exe: ISetupManager::LoadCommandLineMgr() completed
[09/19/11,17:19:14] Setup.exe: ISetupManager::RunIntro() : LoadSetupLog
[09/19/11,17:19:14] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:14] Setup.exe: ISetupManager::LoadSetupLog() completed
[09/19/11,17:19:14] UTILS::RunNGENAction: Started
[09/19/11,17:19:14] UTILS::RunNGENAction: starting "C:\Windows\Microsoft.NET\Framework\v2.0.50727\ngen.exe queue pause"
[09/19/11,17:19:15] UTILS::RunNGENAction: ngen.exe returned 0
[09/19/11,17:19:15] Setup.exe: ISetupManager::RunIntro() : LoadManagers
[09/19/11,17:19:15] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:15] Setup.exe: inside ISetupManager::LoadDependencyMgr()
[09/19/11,17:19:15] Setup.exe: inside ISetupManager::LoadCDInfoMgr()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: inside ISetupManager::LoadDiskInfoMgr()
[09/19/11,17:19:15] Setup.exe: inside ISetupManager::LoadUIManager()
[09/19/11,17:19:15] vs70uimgr: Entering InitializeModule() method.
[09/19/11,17:19:15] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:15] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:15] Setup.exe: ISetupManager::RunIntro() : LoadDatabaseValues
[09/19/11,17:19:15] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetGlobalCustomProperty({2C320A80-183E-4F7E-8832-66A0F5756221})
[09/19/11,17:19:15] Setup.exe: GetGlobalCustomProperty({8297A38B-6431-4F1D-9F6E-C3D371CEA383})
[09/19/11,17:19:15] Setup.exe: GetGlobalCustomProperty({B8A13F14-4BDE-4EC4-A53C-8E51FBB8261F})
[09/19/11,17:19:15] Setup.exe: GetGlobalCustomProperty({AA62DF98-3F2C-11D3-887B-00C04F8ECDD6})
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetGlobalCustomProperty({8297A38B-6431-4F1D-9F6E-C3D371CEA383})
[09/19/11,17:19:15] Setup.exe: GetGlobalCustomProperty({E0875D42-A33D-4C64-81C9-167795F29CA4})
[09/19/11,17:19:15] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:17] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:17] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:17] MSITOSIT: ***ERRORLOG EVENT*** : CRootComponent::SetManager() - MsiGetActiveDatabase returned an invalid handle
[09/19/11,17:19:17] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:17] MSITOSIT: ***ERRORLOG EVENT*** : ERROR processed; exception was thrown for retail build
Developer Comment: MsiGetActiveDatabase returned an invalid handle
Build Time: Thu Dec 11 15:04:18 2003
DWORD: 0
[09/19/11,17:19:17] Setup.exe: GetCustomProperties()
[09/19/11,17:19:17] Setup.exe: get_CustomProperties()
[09/19/11,17:19:17] Setup.exe: GetGlobalCustomProperty({8297A38B-6431-4F1D-9F6E-C3D371CEA383})
[09/19/11,17:19:17] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:17] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:17] setup.exe: ***ERRORLOG EVENT*** : ISetupModule::SetManager() failed in ISetupManager::LoadSetupObjectGuid() : vs_setup.dll
[09/19/11,17:19:18] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:18] setup.exe: ***ERRORLOG EVENT*** : CSetupManager::LoadSetupObjectname() - Failed in call to LoadSetupObjectGuid() for strName: in file: vs_setup.dll
[09/19/11,17:19:18] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:18] setup.exe: ***ERRORLOG EVENT*** : LoadComponent(), LoadSetupObjectName failure: vs_setup.dll
[09/19/11,17:19:18] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:18] setup.exe: ***ERRORLOG EVENT*** : LoadComponent failed in ISetupManager::LoadComponentsFromDBObject(): vs_setup.dll
[09/19/11,17:19:18] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:18] setup.exe: ***ERRORLOG EVENT*** : CSetupManager::LoadDatabaseValues() - Failed in call to LoadComponentsFroMDBObjects()
[09/19/11,17:19:18] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:18] setup.exe: ***ERRORLOG EVENT*** : CSetupManager::RunIntro() - Failed to Load Database Values
[09/19/11,17:19:18] vs70uimgr: Entering DisplayMessage() method.
[09/19/11,17:19:18] vs70uimgr: DisplayMessage_START:A problem has been encountered while loading the setup components. Canceling setup.
[09/19/11,17:19:18] Setup.exe: CCoreEngine-Proc() - Finished Main Message Loop
[09/19/11,17:19:50] vs70uimgr: DisplayMessage_END:A problem has been encountered while loading the setup components. Canceling setup.
[09/19/11,17:19:50] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:50] setup.exe: ***ERRORLOG EVENT*** : CSetupManager::RunLoadSetup() - Failed to Run the Intro
[09/19/11,17:19:50] Setup.exe: UnloadSuiteComponents()
[09/19/11,17:19:50] UTILS::RunNGENAction: Started
[09/19/11,17:19:50] UTILS::RunNGENAction: starting "C:\Windows\Microsoft.NET\Framework\v2.0.50727\ngen.exe queue continue"
[09/19/11,17:19:51] UTILS::RunNGENAction: ngen.exe returned 0
[09/19/11,17:19:51] Setup.exe: GetGlobalCustomProperty(AA4EEF91-FB37-4135-9B73-484B75DDAA42)
Kindly to help me. I've done many things including the advice which is refer to:
http://social.msdn.microsoft.com/Forums/en/vssetup/thread/ebe334d3-c1ab-44ce-a449-b65940dac589
No luck at all..

Programming NI-5122 in Visual Studio 2005 with multithread mode can cause hang

Hello,
I'm developing an application in Visual Studio 2005. I called NI-Scope APIs in a working thread. The software can talk to NI-5122 successfully, which I can see from NI-spy. However, after that, the UI hangs up. When I debug the program, Visual Studio tells me there is some deadlock among some threads. I attached the application used to reproduce this problem. To reproduce this problem, you just need to click the "Run" button on the dialog. Here is my developing settings.
Hardware: NI-PCI-5122 digitizer (the device name is "Dev1" in MAX)
Software: Windows XP+Visual Studio 2005+NI-Scope 3.3.0f0.
Please advise.
Thanks,
Jucao Liang
Attachments:
Copy of MT_Test_NI_DGT_AWG.zip ‏136 KB

Hi Jucao,
Keep in mind that you just need to call this extra code once within the main thread. I have modified your .cpp file by placing these calls in your CMT_Test_NI_DGT_AWGDlg:: OnInitDialog().
Another solution is to call
#include "ivi.h"
IviConfigStoreHandle handle=NULL;
Ivi_GetConfigStoreHandle(&handle);
from the main thread. To use this solution, you will need to be sure to link to the ivi.lib library. The attached file has both workarounds in place, with the IviConfigStoreHandle method commented out.
I hope this helps.
Regards,
Sean Close
Product Support Engineer: High Speed Digitizers
Message Edited by Sean C. on 05-24-2007 10:17 AM
Attachments:
MT_Test_NI_DGT_AWGDlg_Mod.cpp ‏5 KB
MT_Test_NI_DGT_AWGDlg_Mod.cpp ‏5 KB

Help with Quicktime for Windows 7 64-bit

I am having a problem with the latest version of Quicktime for Windows. When I launch Quicktime and then 'click' on any icon for download I can see the sentence, "Connecting to iTunes" and then I am redirected to download iTunes... Problem is that I already have iTunes.
Windows 7 Ultimate 64-bit SP1 and up to date.
iTunes version 11.1.3.8
Quicktime version 7.74.80.86
I Unibstalled both products, using the guide provided from Apple. I, then downloaded and installed iTunes first, then I downloaded Quicktime and installed it. I had the same issue. Next, I went to Control Panel/ "programs and Features, used the "change" option and clicked "repair". I did this for both iTunes and Quicktime. They ran fine. No error messages, nothing in event logs, no trace of an install log to try to diagnose this myself. Does anyone have this problem, or can anyone help me to start the diagnosis necessary to solve this?
Second issue came to light after all of the steps I performed; Before, I would conect my iPhone to a USB port and iTunes would launch automatically. Now, it does not. I see my 4s in devices and I see a normal state using device manager. So, I went to "Default Programs" and selected my 4s and the dropdown window no longer has an option for iTunes. However, when I go to choose a default program for audeo, etc. the dropdown mwnu has an option for iTunes.
Thanks for reading and I would like some help.
Doug Shreve

I found the problem and the solution. In Internet Explorer ver 11 / manage plugin's, make sure that the Apple plugin's are enabled. My setings were incorrect, the plugin ws siabled. Enabled it and all is well!

INSTALLATION OF SP1 FOR WINDOWS 7 32 BIT

MY WINDOWS UPDATE HAS BEEN TRYING TO INSTALL WINDOWS 7 SP1 FOR 3 YEARS. I HAVE WINDOWS 7 HOME PREMIUM 32 BIT. IT FAILS EVERY TIME, OBVIOUSLY, WITH THE ERROR CODE 80073701. CAN SOMEONE PLEASE TELL ME WHY IT WON'T INSTALL AND A POSSIBLE
SOLUTION. IF I AM NOT ON THE CORRECT WEBSITE, PLEASE SUPPLY ME WITH THE CORRECT LINK. PLEASE HELP!!!

Hi,
Please try the below three methods:
Method 1: Run the System Update Readiness Tool (checksur.exe)
Method 2: Uninstall unnecessary language packs
Method 3: Perform an inplace upgrade
For more information, please read the following article:
Error 0x80073701 appears when you try to install Service Pack 1 on Windows 7
http://support.microsoft.com/kb/2700530
Karen Hu
TechNet Community Support

Problem with update for Windows 7 64 bit

I downloaded and updated to the newest version of iTunes, but when I restarted, as requested, my internet wouldn't work anymore. Not just when iTunes was open mind you....it wouldn't work AT ALL!! Up until the update iTunes ran fine, the internet was fine. So I uninstalled iTunes and now my internet is working again. So what's up with that? Why would iTunes suddenly interfere with my networks for the internet?

If you're new to forums you might need to know that Adobe have many dozens of different forums. If you post in the wrong one, the people there won't know anything about your problem, so take care to choose carefully.
The Installing Flash Player forum is here: Installing Flash Player
Good luck!

Visual Studio 2005 crashes when referencing ALI 6.5 portal server API

Visual Studio 2005 crashes when referencing ALI 6.5 portal server API
We are building new portlets in .NET 2.0 to that access the ALI 6.5 server API and are experienceing the folowing scenario:
I create a brand new project in Visual Studio (2005 with SP1 on Win2k3 R2 SP2) using the ALI Portal Project template that is provided with the application accelerator 1.1. This portlet will need to perform portal server searches so I begin by adding references to the following assemblies from C:\bea\alui\ptportal\6.5\bin\assemblies:
openconfig.dll
opencounters.dll
opencache.dll
openhttp.dll
openssl.dll
opentempfile.dll
plumtreeserver.dll
ptportalobjects.dll
I then type in something like below to start up the portal server objects.
protected void Page_Load(object sender, EventArgs e)
IOKContext context = OKConfigFactory.createInstance("C:\\bea\\alui\\settings\\", "portal");
PortalObjectsFactory.Init(context);
this.Response.Write("Portal Objects Initiallized");
Some moments later Visual Studio will crash. It has happened before I have entered any code, after I have started typing code and on builds. It seems intermittent but usually occurs within a minute of interacting with this Visual Studio project. I actually managed to build once and have had success accessing this page in Explorer to validate the portal server objects are getting initialized and referenced correctly.
I thought this was a problem with my personal development environment. So I tried this on other machines: another Win2k3 ALI 6.5 dev portal server and another server with Visual Studio 2005 that I installed the 6.5 portal on just for testing this. The exact behavior listed above is occurring on three development machines here (crashing devenv.exe when portal references are made or loading a project with portal references). Since this does not seem to be isolated to a single development machine, is there any course of action that anyone would suggest to help solve this?
thanks,
Troy Rackley

It turns out that this is only a problem with Visual Studio using the ALI templates or creating any projects using the "New... Web site" functionality of 2005. I was a ble to create a C#... ASP.net Web Application project and add the references to the idk and the local portal server APIs manually without devenv.exe crashes.
So, the work around I have found if your projects needs to access both the portal server API and the remote API is to create the project with:
New... Project... Visual C#... ASP.NET Web Application
and NOT
New... Web Site... ASP.NET Web Site (or ALI Portlet Project)
Anyone know why this is the case?
Thanks.
Troy

How to compile AnyConnect API with Visual Studio 2005?

Gooday,
I have downloaded anyconnect-win-vpnapi-2.5.3055.zip and am unable to build successfully examples.sln on a Windows XP SP2 platform. I would appreciate help in how to build examples.sln sucessfully. I get the following errors depending on the type of build using Visual Studio 2005 with service pack 1:
1. Debug configuration for all - "Fatal error C1900: mismatch between 'P1' version '20060201' and 'P2' version '20050411'
- appears a static lib file is out of date?
- i downloaded and used as is so don't know how else to resolve it
2. Release configuration for all - "Fatal error C1047: The object or library file '.\Release\PrivateApi.obj' was created with an older compiler than other objects; rebuild old objects and libraries' "
Thanx,tom.

You duplicated Java_Test_getWord. The function signature should read:JNIEXPORT jstring JNICALL Java_Test_getWord(JNIEnv *env, jobject obj) Regards

Drivers for Windows 7 64-bit for HP Pavilion 15-p125ng

Can any one help me with Drivers for Windows 7 64-bit for HP Pavilion 15-p125ng? I'll be very grateful for any answers
This question was solved.
View Solution.

Hi:
You should be able to use the drivers and software from this model on yours...
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=6936...
When you go to install the graphics you have to install these drivers in this order and reboot after each installation.
1. Intel chipset installation utility.
2. Intel HD graphics driver.
3. Nvidia HD graphics driver.

Cancelled my Windows Azure Benefit for Visual Studio Premium with MSDN by mistake, and now?

Hello
I have mistakenly cancelled my Windows Azure Benefit for Visual Studio Premium with MSDN subscription a couple of months ago not knowing what I was basically cancelling. Today I wanted to start playing around with Windows Azure when I figured this out.
I still have a valid MSDN Premium Subscription and now when I click the link to Activate Windows Azure from the MSDN Benefits page I have to create a new subscription named "Visual Studio Premium with MSDN" and on the bottom of the page I see "Windows
Azure MSDN - Visual Studio Premium".
I the "Visual Studio Premium with MSDN" the one that I get with my MSDN subscription? I guess that the "Windows Azure MSDN - Visual Studio Premium" has been renamed.
All I see is that my "Visual Studio Premium with MSDN" has a spending limit of "75 euro" / month. This is all so confusing...
Regards

Hi,
It's a good choice to contact with azure support, Please contact support team by creating a support ticket at
http://www.windowsazure.com/en-us/support/contact/
Or if that doesn't work because you don't have an active subscription you will need to contact general customer support to have them create a support ticket for you
http://support.microsoft.com/gp/customer-service-phone-numbers?wa=wsignin1.0
Best Regards
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Installa error for visual studio 2005 and Visual C++ 2005 on windows server 2003 SP@

Not able to install visual studio 2005 I am getting error “The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch” and for visual C++ 2005 after clicking the setup file nothing is displayed on the desktop. please guide. All the above software I am installing on windows server 2003 service pack2
Dear Gurus Please help me

You might want to try : MS Visual Studio 2008 and Visual C++ 2008 Express instead as this version is supported as well.
See:
For R12: Note 1070674.1 - MS Visual Studio 2008 and Visual C++ 2008 Express for Oracle E-Business Suite Release 12 on Windows
For 11i : Note 1095124.1 - Microsoft Visual Studio 2008 and Visual C++ 2008 Express for Oracle E-Business Suite Release 11i on Windows
Regards,
Ronald

Where can I download WINCE 6.0 Platform Builder plugin for Visual Studio 2005?

I am supporting an older product that runs WINCE 6.0. I need to build a development environment. I understand the tool chain is based on Visual Studio 2005 SP1, which I have. I also have the Windows Embedded CE 6.0 Platform Builder Service Pack 1, but
what I can't seem to find anywhere on MSDN is the base Windows Embedded CE 6.0 Platform Builder.
FWIW, I have an MSDN Universal Subscription.
[EDIT] OK, I found it. The download is named simply Windows Embedded CE 6.0. There is no "Platform Builder" in the title.
Here is the link: https://msdn.microsoft.com/en-us/subscriptions/downloads/#FileId=10961

Thanks Henrik. My question is for the same customer that Alex K. was asking about.
The customer has pointed out that 6.5 != 6.0 , so according to the wording in the documentation, the "all later releases of 6.0" would not apply to 6.5 releases. So the customer would need a precise statement from JRockit product management stating that 6.5 releases are indeed to be included wherever there is a reference to "all later releases of 6.0".
I did spend some time yesterday in MetaLink. Search Knowledge base -> Oracle JRockit for download gives 38 hits. I did find older versions of WebLogic Server in 763603.1, but nothing for JRockit. If there is another DocId with the JRockit downloads, what is it? Will I find JRockit 64 bit for Solaris 27.6.0 bundled in the WebLogic Server downloads? Guessing from the size of the downloads for Solaris 64bit (they are hundreds of MB smaller than other downloads) - it seems possible that the JVM is not included (I do not have a Solaris machine to install and check). Previously I had assumed the JVM was included, but then the customer wouldn't be asking where they can download from (unless they never bother to look what they installed).
Michael.Reiche

[IDCS3 WIN] Visual Studio 2005 SP1

Hi Folks,
Has anyone had success using Visual Studio 2005 SP1 to compile and run CS3 plug-ins?
I'm having a troubles running ID CS3 plug-ins complied with Visual Studio 2005 SP1 and running under Windows Vista. I know SP1 is not officially supported, but I had it installed. Before I go through the downgrade dance, I would like to know if downgrading has a chance to solve this issue...
The plug-in runs fine on Windows XP SP2 on the machine on which I compiled the plug-in. The plug-in does not run on a Windows Vista machine on which no compiler is installed.
So, I have complied the BasicPanel project, and when run on a Windows Vista machine (of which I only have access to one), I get the following error (as seen in the Configure Plug-ins window for the plug-in). Plug-in Information window's Errors section reads:
LoadLibrary failed. The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail.
After reading through a bunch of online information about this error, I'm still as confused as ever (I'm more comfortable with Mac than Windows). It seems like (maybe?) there might be an issue with the dlls that ID has installed versus the ones that my complied plug-ins are interested in. Maybe VS2005 SP1 has newer dlls than are installed in ID CS3 and that's where the trouble lies?
Can anyone here shed any light on this for me?
Thanks in advance!!!!!
-- Jim

Hi All!
I create plug-ins for InDesign CS2 using Visual Studio C++ 2005 Expres Edition.
The plug-in runs fine in the computer that the VS C++ 2005 ED is installed.
But I get this error in computers where there is no VS C++ 2005 ED intalled:(xp sp2)
LoadLibrary failed. The application has failed to start ...
Thanks to your posts I come to the solution that installing,
Visual C++ 2005 Redistributable Package (x86) on the machine that has no VS C++ 2005 ED intalled, really solved the problem.
My Question is Has Any one solved the problem without having to install the Redistributable Package.??
I read something about the manifest but I'm confused.
Geting VS C++ 2003 really solves the problem, but It's hard for me to find I Licenced copy.
Thank you!

Visual Studio 2005 with SP1 for Windows 7 - 64 bit

Similar Messages

Maybe you are looking for