Visual Studio 2013 and SSDT-BI Preview Command Window

Hi,
Is it normal that VS is putting up a command window when previewing SSRS reports from Visual Studio 2013. It pops up when on preview and I have to minimize it. Can some settings make this window invisible (a more integrated approach)?
Regards
SWEDEV

Hi SWEDEV,
Based on my research, a command window pops up when we preview an SSRS report in Visual Studio 2013 is a confirmed issue.
The issue is fixed, but the updated version within the coming couple of weeks. For more details about this issue, please refer to the following Connect Feedback 849709 and 884544:
https://connect.microsoft.com/SQLServer/feedback/details/849709/reporting-services-preview-processing-host-issues
https://connect.microsoft.com/SQLServer/feedback/details/884544/ssdt-bi-for-vs2013-preview-for-ssrs-pops-up-a-command-window
If there are any other questions, please feel free to ask.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Similar Messages

Launching VB6 Editor after installing Visual Studio 2013 results in "Please wait while Windows configures Microsoft Visual Studio..."

I have had various versions of Visual Studio installed beside Visual Basic 6.0 Enterprise for some time with no problems, most recently Visual Studio 2012 Premium.
I recently installed Visual Studio 2013 Premium, and now every time I open VB6 I get a dialog that says "Please wait while Windows configures Microsoft Visual Studio Professional 2013" that shows a progress bar. After it finishes (30 seconds or
so), it launches again and again and finally VB6 will open. This happens with each instance of VB6, regardless if I've already done it once and never run VS2013 in between.
If I cancel the dialog, I get this error message in a dialog: "Error 1712. One or more of the files required to restore your computer to its previous state could not be found. Restoration will not be possible." Several more "Please wait"...
dialogs will appear and if I continue to cancel, eventually I'll get the VB6 editor. It appear to work fine despite the error messages.
It seems to me that the VS2013 installer flagged some dll's or other files to be rolled back whenever starting VB6. It doesn't appear to be necessary, and I'd like to avoid playing the "Please wait" wack-a-cancel-button game before launching each
instance of VB6 (or waiting several minutes for no reason). So how do I fix this?
Note: I've seen something similar happen in Outlook on a different PC when upgrading from 2010 to 2013. The same sort of "Please wait"... dialog would appear each time I opened Outlook. Judging by the "similar" questions that popped up when
entering this forum post, I'd say this is a general problem with upgrading older versions or installing newer versions of major Microsoft software side-by-side.
/* Don Reynolds */

I found the answer!
I was having the exact same issue, and I was search for a solution and I happened across the following thread: http://social.msdn.microsoft.com/Forums/en-US/f4b0fd38-f4f9-41ea-bd8d-834203a175d2/building-visual-studio-2010-project-triggers-please-wait-while-windows-configures-visual-studio?forum=vssetup&prof=required
Scroll a small bit down, and there is a post by Barry Wang explaining that you need to use event viewer to find out what is missing. Anyway, I opened event viewer, then open VS 6, then hit refresh in the event viewer (under Windows Logs -> Application)
and saw a warning message from MsiInstaller. It gave me the following message:
Detection of product '{9C593464-7F2F-37B3-89F8-7E894E3B09EA}', feature 'Visual_Studio_Professional_x86_enu', component '{E3FF99AA-78B9-4A06-8A74-869E9F65E1FE}' failed. The resource 'C:\WINDOWS\Microsoft.NET\Framework\URTInstallPath_GAC\' does
not exist.
I opened an elevated command prompt, I navigated to the C:\WINDOWS\Microsoft.NET\Framework folder and verified that 'URTInstallPath_GAC' didn't exist, and then I did "md URTInstallPath_GAC".
Closed and reopened VS 6, and it instantly opened - no "Please wait" message.
Now this may or may not be the same problem you are having (problem is - I have had it happen on two separate computers now with VS 6 and VS 2013 installed), but it should point you in the right direction. In fact, you should be able to use the Event Viewer
for anytime the "Please wait" message shows up for any application, and then once there find out what is really missing.

Windows Azure Tools for Visual Studio 2013 - v2.2 install fails on Windows Server 2012 R2

Microsoft Visual Studio Professional 2013
Version 12.0.21005.1 REL
Microsoft .NET Framework
Version 4.5.51641
The installation completes without any errors on my VM running Windows Server 2012 R2, however its not recognized in VS2013 ? It also breaks the Publish functionality when I try and publish a web site to my hosting provider.

I tried install, uninstall, reinstall cycle several times without success. Any help would be greatly appreciated.
here is my About info:
Microsoft Visual Studio Professional 2013
Version 12.0.21005.1 REL
Microsoft .NET Framework
Version 4.5.51641
Installed Version: Professional
LightSwitch for Visual Studio 2013   06177-004-0444002-02824
Microsoft LightSwitch for Visual Studio 2013
Microsoft Office Developer Tools for Visual Studio 2013 ENU   06177-004-0444002-02824
Microsoft Office Developer Tools for Visual Studio 2013 ENU
Team Explorer for Visual Studio 2013   06177-004-0444002-02824
Microsoft Team Explorer for Visual Studio 2013
Visual Basic 2013   06177-004-0444002-02824
Microsoft Visual Basic 2013
Visual C# 2013   06177-004-0444002-02824
Microsoft Visual C# 2013
Visual C++ 2013   06177-004-0444002-02824
Microsoft Visual C++ 2013
Visual F# 2013   06177-004-0444002-02824
Microsoft Visual F# 2013
Visual Studio 2013 Code Analysis Spell Checker   06177-004-0444002-02824
Microsoft® Visual Studio® 2013 Code Analysis Spell Checker
Portions of International CorrectSpell™ spelling correction system © 1993 by Lernout & Hauspie Speech Products N.V. All rights reserved.
The American Heritage® Dictionary of the English Language, Third Edition Copyright © 1992 Houghton Mifflin Company. Electronic version licensed from Lernout & Hauspie Speech Products N.V. All rights reserved.
ASP.NET Web Frameworks and Tools 2012.2   4.1.21001.0
For additional information, visit http://go.microsoft.com/fwlink/?LinkID=309563
ASP.NET Web Frameworks and Tools 2013   5.0.11001.0
For additional information, visit http://www.asp.net/
BusinessObjectEditor   1.0
Information about my package
CodeRush for Visual Studio   13.2
Common Azure Tools   1.0
Provides common services for use by Azure Mobile Services and Windows Azure Tools.
CreateLayoutWizardPkg   1.0
Create layout wizard.
DevExpress.ExpressApp.Design.DesignDynamicPackage   1.0
DevExpress VSIX Package
DevExpress.ExpressApp.DesignPackage   1.0
DevExpress VSIX Package
DevExtreme.Design   13.2.6
DevExtreme Visual Studio integration package
DXCore for Visual Studio   13.2
DXCore for Visual Studio
PreEmptive Analytics Visualizer   1.2
Microsoft Visual Studio extension to visualize aggregated summaries from the PreEmptive Analytics product.
SQL Server Data Tools   12.0.30919.1
Microsoft SQL Server Data Tools
Windows Azure Mobile Services Tools   1.0
Windows Azure Mobile Services Tools
Workflow Manager Tools 1.0   1.0
This package contains the necessary Visual Studio integration components for Workflow Manager.
XtraReports package   1.0
XtraReports package

Problems running .aspx and aspx.vb in DW (pages work correctly in MS Visual Studio 2013)

I'm very confused and surprised I can't seem to find any postings on this problem. It's very peculiar so stay with me: I've designed a VB .Net webpage called Regstration_Form.aspx in Visual Studio 2013 (which is tied to a second form, Registration_Form.aspx.vb which contains the active visual basic script that processes data entered on the .aspx page). I've tested this page in Visual Studio 2013, AND IT WORKS AS IT IS SUPPOSED TO...the webpage looks clean, accepts the data entered on the page, and the buttons execute the visual basic script from the .aspx.vb page flawlessly.
NOW, I've designed an html website in Dreamweaver CS6 with multiple (passive) .html pages, and I want to integrate the .aspx/.aspx.vb pages with the others in Dreamweaver now that I have them working in VS 2013. After all, Dreamweaver let's me (and proclaims to) save files as aspx files and support their functionality. It seems to me I should be able to simply move them in to the Dreamweaver folder for the website (along with the config file in the root), but...here's what happens:
(1) when I test run the aspx page from Dreamweaver, the browser webpage shows the html code in black-and-white (code view). It does not display the actual webpage.
(2) (even weirder) If I change the .aspx page extension to .html, the browser (correctly) shows the webpage I've designed. BUT, now when I click the "submit" button to perform the active tasks (again, which work in VS 2013), the webpage changes from the correct webpage shown only moments earlier to now SHOWING THE ASPX.VB CODE.
Put another way, dreamweaver displays html code if the page is .aspx, and displays .aspx.vb code if the .aspx page is changed to .html. Either way, my aspx pages are not being executed correctly by Dreamweaver, despite working perfectly well in VS 2013 and I cannot figure out why.
I have enabled IIS on my computer.
I have placed the config file in the root.
I have enabled .NET functionality in Dreamweaver's "disabled features" folder.
I'm stumped...does anyone have any ideas?
Thanks!

I don't work with ASPX sites. But PHP sites need a local testing server defined in DW.
Nancy O.

Visual Studio 2013 Crystal Report V9 does not display in browser

Hello, I work with Visual Studio 2013, and was anxious for version 13.0.9.1312, glad you came. Well I installed the full version and the report usually opened in VS, but when it does not compile command displays. Published in a local and it worked, but the VS does not work, if you click with the right mouse button to display codes are the codes it, but does not show. I used IE, and nothing Chomo. How does VS2013 use IIS Express as a server. Have any solution for this?

See this post for the answer...
Re: Crystal Reports does not load aspnet_client files to proper IISExpress directory
Don

Visual Studio 2013 Ultimate with Update 4 Installation Hangs on "Windows Software Development Kit" step

Hi,
I am attempting to install Visual Studio 2013 Ultimate with Update 4 on a Windows 2008 Server R2 machine that also has Visual Studio 2012 Ultimate already installed.
Unfortunately, the installation always hangs on the "Windows Software Development Kit" step. I have let it run overnight and the installation process never gets past this step. I always have to just kill the process, and uninstall.
I have validated the checksum of the ISO, run the .exe as administrator, and also tried to install the software to both the C and D drive.
I have also tried to run the installation with all of the optional components checked as well as with none of the optional components checked.
In addition, I have uninstalled visual studio 2013 using the /uninstall /force command
I have examined the log files produced at C:\Users\MYNAME\AppData\Local\Temp and I dont see anything obviously wrong.
Here are the last few lines of the dd_vs_ultimate_20150109195533_225_Windows_SDK_Desktop.log file
MSI (s) (DC:F0) [20:18:20:263]: Note: 1: 1402 2: UNKNOWN\Installer\Features\A2FE5D06C0E403C2836F952CE631F4A4 3: 2
MSI (s) (DC:F0) [20:18:20:264]: Executing op: FeatureUnpublish(Feature=fe1d729f658fb745208c65956a0785d1b5,,Absent=2,Component=-N^qZe,c5?d.aP0.TOGN'+)%sZY@1xERdO]t)Sp,GXiq3m.l3EZ%Ox4io*FIQjbhz+j*zDWXXjMlUqpxp76U.08$^E=~()4a*jQRrsrMS.QvXF4uY819FP4s^d9K5=JH2CbML)ukS5l7@u%qQhykqD+hxS=.~k}N@%y_t159JF&4~{x$t&nJ)
MSI (s) (DC:F0) [20:18:20:265]: Note: 1: 1402 2: UNKNOWN\Installer\Features\A2FE5D06C0E403C2836F952CE631F4A4 3: 2
MSI (s) (DC:F0) [20:18:20:266]: Executing op: ActionStart(Name=RemoveFiles,Description=Removing files,Template=File: [1], Directory: [9])
MSI (s) (DC:F0) [20:18:20:266]: Executing op: ProgressTotal(Total=2698,Type=1,ByteEquivalent=175000)
MSI (s) (DC:F0) [20:18:20:267]: Executing op: SetTargetFolder(Folder=C:\Program Files (x86)\Windows Kits\8.0\bin\x86\)
MSI (s) (DC:F0) [20:18:20:267]: Executing op: FileRemove(,FileName=Orca-x86_en-us.msi,,ComponentId={FE5AB6C3-6785-5A16-91A2-857596456EF8})
Does anyone have any ideas of why this is happening? Are there any specific log files I could provide to help pinpoint the problem?
Thanks
Thomas

Hello Thomas,
"I have validated the checksum of the ISO" Do you mean you have used this page
http://www.visualstudio.com/en-us/downloads/visual-studio-2013-iso-sha1-vs.aspx# to verify your ISO?
Please send your full logs to me by use http://aka.ms/vscollect . After using it, you will find vslogs.cab from %temp% folder. Please upload the file to
https://skydrive.live.com/
and share the link here.
Actually you can refer to the following page to troubleshoot Windows SDK issue:
http://msdn.microsoft.com/en-us/library/ee248512(v=vs.100).aspx
The recommend way is to manually install Windows SDK itself and check the logs in detail.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Finding Memory leaks in C using Visual Studio 2013

I am using Visual Studio 2013, and taking a course in C programming and we started
talking about memory bugs detaction, in particular memory leaks, and how to detect them using Valgrind on Linux.
I want to know if there is a way to detect such memory leaks using VS 2013. I tried searching online but it just leads to lots of articles and blogs and msdn posts and blogs with lots of words like dump files, and analyzing them, etc which is weird
because:
1) It sounds so complex, convoluted and unintuitive it is actually hard to comprehend it.
2) The main reason this is weird is due to the fact that VS is the most advanced IDE around and Microsoft spends so much money on in, yet from what I have read it seems that there is no simple way to use VS to detect memory leaks
- certainly no way that's as simple as Valgrind where I only have to compile the program and run the command valgrind -leaks-check=yes ProgramName
and it simply prints to me all location it thinks there is a memory leak and describes the error (like not freeing memory after allocating it with malloc hence having "dead" memory after the program finishes, or accessing memory that's out of
the array bounds)
So my question is how to use VS 2013 in order to achieve the same results and to find out First in high level if there are memory leaks in the program, and Second - to detect in a simple manner where those leaks are- preferably without involving dump files
(not that I know how to use them anyway in VS).

Hi MicrosoftLaw,
Thanks for your post.
Based on your issue, if you want to check if there are memory leaks in the C program from this VS2013. I suggest you could try to find Memory Leaks Using the CRT Library, for more information:
https://msdn.microsoft.com/en-us/library/x98tx3cf.aspx?f=255&MSPPError=-2147217396
In addition, I find a similar thread about this issue, please you refer the Dusty's suggestion to check this issue.
http://stackoverflow.com/questions/45627/how-do-you-detect-avoid-memory-leaks-in-your-unmanaged-code
I did some research about this issue, I found that the Visual Leak Detector extension tool is a free, robust, open-source memory leak detection system for Visual C++. So if possible, I suggest you could try to use the Visual Leak Detector extension
tool to find the memory leak for Visual C/ C++ program.
https://visualstudiogallery.msdn.microsoft.com/7c40a5d8-dd35-4019-a2af-cb1403f5939c
However, if you have any issue about how to use this Visual Leak Detector extension tool to find the memory leak for C program. I suggest you could directly to write a review to this REVIEW tab in Visual Leak Detector site.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Sharepoint 2010 Remote Development using Visual Studio 2013 Connection Errors

I have a customer who is using a custom skinned site developed in Sharepoint 2010.
I am trying to debug a webpart that is not loading on a page.
My Environment:
Local Laptop running Win 7 64 Enterprise, Visual Studio 2013, and Sharepoint Designer 2010.
I connect to the customers network via VPN and use RDP to access the server. I have Admin rights to the server.
Everything that I have read indicates that Web Part dev has to be done in VS. When I try to connect using server explorer, VS kicks back a 'Server Can not be found' error.
I have tried using the computer name, the app url listed in SP Central Admin, the IP address of the box, and the actual URL of the site. However, VS can not connect to the server.
I have done some homework on connecting VS to a remote machine:
Adding New Servers in Server Explorer
http://msdn.microsoft.com/en-us/library/edfcxas2%28v=vs.71%29.ASPX
Add Server Dialog Box
http://msdn.microsoft.com/en-us/library/107b72aa%28v=vs.71%29.ASPX
SharePoint -how to connect remotely to production server
http://stackoverflow.com/questions/3188364/sharepoint-how-to-connect-remotely-to-production-server
SharePoint 2010 Development with Visual Studio
http://stackoverflow.com/questions/10529917/sharepoint-2010-development-with-visual-studio
Setting Up the Development Environment for SharePoint 2010 on Windows Vista, Windows 7, and Windows Server 2008
http://msdn.microsoft.com/en-us/library/ee554869%28office.14%29.aspx
Using SharePoint Designer 2010 to Work with Web Parts
http://msdn.microsoft.com/en-us/library/ff630941%28v=office.14%29.aspx#odc_sp14_qn_UsingSharePointDesigner2010WorkwithWebParts_CreateXSLTListView
The last connection article is confusing because one of the SO answers indicates that you do not need to have SP2010 installed.
I have been doing lots of reading on SP structure, and it seems to jump all over the place. (Or at least my research does). I have been reading this Ebook:
SharePoint 2010 Development with Visual Studio 2010
http://books.google.com/books/about/SharePoint_2010_Development_with_Visual.html?id=TVKICs4vHTcC
My questions are:
Why cant I connect to the Server if I connected through VPN which would inherently make the server a local network computer?
Do I need to have VS installed on the actual server? I read that I can install Sharepoint Foundation locally and this will give me access to the server in VS.
Do I need to have the full version of VS installed in order to use Remote Tools?
For the Web Parts:
Why cant I see the web parts in Sharepoint Designer? I take it they are exclusively designed in VS, which brings me back to the questions above.
In Sharepoint Designer, I can see a custom view that was created from a custom list. I want to add that list to the page where the web part isnt working. When I open up the Edit Interface, and try to find that list, it does not display in the 'Lists and Libraries'
menu

Hello,
As per your description, remote deployment is not possible for server side code in sharepoint so if you are using server object model then you won't be able to debug or deploy your solution from visual studio.
VS is not required to installed on UAT/prod server but you need sharepoint along with visual studio in same development machine to develop any custom webpart.
Once you deploy your custom webpart on site then you will be able to see that webpart in webpart gallery and that gallery is also available in designer so it means you can also add your custom webpart from designer to any page.
Correct me if i misunderstood you
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

Visual Studio 2013 to open a Sage 50 Crystal Report (which is in 2008)

Is it possible to open a report using the latest runtimes and visual studio components (v13)?
I am trying to view a crystal report done in 2008 on a web site I'm creating. When I add the controls (CrystalReportViewer and CrystalReportSource with path to report) and run the page it asks me for credentials. I know I can programatically set them but I wanted to try to see if it worked at first. I plugged in the credentials and the popup for credentials kept coming back. It would never show the report.
I then tried programatically setting the login credentials and still would show the credentials popup.
Is this because of a version issue? Any ideas or suggestions? I only have visual studio 2013 and I'm hoping it's still possible to view the report on a web site.
Thanks in advance,
Miguel Martorell

Thansk for the quick reply.
I am able to access the database using the odbc connections even with a query tool used outside of their server. I have the ODBC set up and what not. I can edit the report using crystal report from outside the server as well. I am just pointing to the .rpt file so I thought it would be a CR version or component issue.
I will ask over there as well hoping for an answer that will help me solve this.
Thanks again,
Miguel Martorell

Version of jvm.dll compatible with 64-bit development on Visual Studio 2013?

Hi. I am building a 64-bit C++ application under Visual Studio 2013. I am using jvm.dll to call Java methods from within the application. The issue is that the version of jvm.dll that is distributed with Java 7 and Java 8 are compiled with Visual Studio 2010 (and thus rely on the msvcr100.dll runtime library). This makes it very dangerous to use with a Visual Studio 2013 application which uses msvcr120.dll (mixing runtime libraries is a very big no-no). I am seeing random memory errors as a result, at the JNI interface level.
Is there any way to get a version of jvm.dll that is compiled with Visual Studio 2013 and is thus dependent on msvcr120.dll?
Thanks,
Dan

Hello,
As per your description, remote deployment is not possible for server side code in sharepoint so if you are using server object model then you won't be able to debug or deploy your solution from visual studio.
VS is not required to installed on UAT/prod server but you need sharepoint along with visual studio in same development machine to develop any custom webpart.
Once you deploy your custom webpart on site then you will be able to see that webpart in webpart gallery and that gallery is also available in designer so it means you can also add your custom webpart from designer to any page.
Correct me if i misunderstood you
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

Visual Studio 2013 is creating new feature every time new list definition is added

We are using Visual Studio 2013 and details are as under:
Microsoft Visual Studio Ultimate 2013
Version 12.0.30501.00 Update 2
We we add a new list definition in our project, it creates a new feature with it. If we delete the feature and add list definition in the existing feature, list is created but columns are not added in the list.
Same thing happened if we rename "Feature1", a new feature is created every time a new list definition is created.
This doesn't happen when we add a Visual WebPart.
Also, we have three different custom list option in the drop down in new list creating wizard.
Is this a bug or we are doing something different.
http://farhanfaiz.wordpress.com

Intellisense has a bug in VS2013 where it doesn't recognize InitializeComponent when you start working on the XAML. My feeling is that if you try to compile this app, it will run fine (as long as there are no actual errors).
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

Visual Studio 2013 & 2015 sign in

I am currently using Visual Studio 2013 Ultimate and I have been trying Visual Studio 2015 Ultimate. Due to corporate policies, our organization has decided to block visualstudio.com from the firewall stating the site allows you to upload code. Obviously
not all of visualstudio.com serves this purpose, but it means that I can't properly leverage the integrated sign in in Visual Studio 2013 and 2015. I got around the requirement in 2013 by entering a license key, but I see no such option in 2015. Ideally however
I'd be able to use the sign in services, but this would require our company to know what areas of visualstudio.com they can block to stop just code upload to visual studio online. Does Microsoft have a document detailing how visualstudio online code upload
can be blocked while still maintaining the Visual Studio account and profile features?

Hi,
According to the discussions, seems what you want to achieve is blocking the all account visualstudio.com websitr, first, you can use content advisor if you're using IE, you can find more information in the link below:
http://blogs.msdn.com/b/askie/archive/2008/12/18/content-advisor-in-the-corporate-environment.aspx
http://windows.microsoft.com/en-hk/windows/using-content-advisor-block-inappropriate-content#1TC=windows-7
You can also edit the hostfile (C:\WINDOWS\system32\drivers\etc\hosts)to block the website, for convenience, I'd like to share the following link with you:
http://www.technet2u.com/2012/09/how-to-block-any-websites-using-host.html
NOTE This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites.
Yolanda Zhu
TechNet Community Support

Database connection error in Visual Studio 2013

I am using Visual Studio 2013 and have installed MS SQL Server 2014. I am trying to generate my database from a model (edmx) but I get the following error: Cannot
connect to <Database>. An incompatible SQL Server version was detected (Microsoft.VisualStudio.Data.Tool.Sqleditor)
In the edmx.sql file, is written:
-- Entity Designer DDL Script for SQL Server 2005, 2008, 2012 and Azure
I can see that 2014 version is missing from this generated file, and seems that the program tries to connect to the 2012 version .. how can I avoid this and manage visual studio tu use the 2014 version of MS SQL Server? Thanks in advance
I already updated the SQL Server Data Tools to the newest version.

Hello,
Please read the following article:
http://support.microsoft.com/kb/2858352/en-us
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

SQL Server Data Tools - for visual studio 2013

Hi
I have recently installed Visual Studio 2013 and need to install the SQL Server Data Tools too, as I have done in Visual Studio 2012, but I can not find the software, where can I get it?
thanks
MsdnMezzo

Hi,
I hope you serve.Regards
SQL Server Data Tools for Visual Studio 2013 - 12.0.40403.0
Portuguese (Brazil)
http://download.microsoft.com/download/2/A/4/2A4211D0-AA9B-4496-A9D4-48CDBED5C25C/BR/SSDTSetup.exe
Chinese (PRC)
http://download.microsoft.com/download/2/A/4/2A4211D0-AA9B-4496-A9D4-48CDBED5C25C/CN/SSDTSetup.exe
German
http://download.microsoft.com/download/2/A/4/2A4211D0-AA9B-4496-A9D4-48CDBED5C25C/DE/SSDTSetup.exe
English (United States)
http://download.microsoft.com/download/2/A/4/2A4211D0-AA9B-4496-A9D4-48CDBED5C25C/EN/SSDTSetup.exe
Spanish
http://download.microsoft.com/download/2/A/4/2A4211D0-AA9B-4496-A9D4-48CDBED5C25C/ES/SSDTSetup.exe
French
http://download.microsoft.com/download/2/A/4/2A4211D0-AA9B-4496-A9D4-48CDBED5C25C/FR/SSDTSetup.exe
Italian
http://download.microsoft.com/download/2/A/4/2A4211D0-AA9B-4496-A9D4-48CDBED5C25C/IT/SSDTSetup.exe
Japanese
http://download.microsoft.com/download/2/A/4/2A4211D0-AA9B-4496-A9D4-48CDBED5C25C/JA/SSDTSetup.exe
Korean
http://download.microsoft.com/download/2/A/4/2A4211D0-AA9B-4496-A9D4-48CDBED5C25C/KO/SSDTSetup.exe
Russian
http://download.microsoft.com/download/2/A/4/2A4211D0-AA9B-4496-A9D4-48CDBED5C25C/RU/SSDTSetup.exe
Chinese (Taiwan)
http://download.microsoft.com/download/2/A/4/2A4211D0-AA9B-4496-A9D4-48CDBED5C25C/TW/SSDTSetup.exe

Error installing SQL Server Data Tools - Business Intelligence for Visual Studio 2013

Hi
I am trying to install SQL Server Data Tools - Business Intelligence for Visual Studio 2013 and am getting the following error
This installation package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer package.
I am running
Windows 8.1 x64
SQL Server 2014 Developer Edition x64
Visual Studio 2013 Professional
Any help would be appreciated.
Thanks
Biztalk Developer

Could you please check if Windows Installer service is running and is in automatic startup mode.
The other thing is, if you’re running an x64-based SQL instance (64-bit), make sure to select “New Instance” on the Installation Type page, and NOT “Add features to an existing instance”.
http://stackoverflow.com/questions/24989187/64-bit-microsoft-sql-server-data-tools

Visual Studio 2013 and SSDT-BI Preview Command Window

Similar Messages

Maybe you are looking for