Visual Studio 2013 - Cordova Installation

I installed the cordova CPT I just downloaded. I deselected a component (iTunes) when I installed it. So I went back in when I found out it was required to work in VS and tried to modify the build, but nothing was listed for me to select. So I decided to
uninstall it so i could install it with all the components. The problem is that it's been uninstalling for over an hour and it's not going anywhere during the Configuring your system phase of the uninstall. I killed it once and after a reboot I was able to
get back in and try it again, but it failed at the same point.
Any ideas?

Hi Alan,
Thank you for posting in MSDN forum.
Generally, I know that we can un-install a tool/ software by going to the Control Panel->All Control Panel Items->Programs and Features-> select the tool/ software -> click Change. So I suggest you can try to do it again from the control panel
check this issue again.
If it still could not help you, about the Cordova install and un-install issue, I suggest that you should
submit this feedback to Microsoft Connect feedback portal: http://connect.microsoft.com/VisualStudio/feedback/CreateFeedback.aspx,
Microsoft
engineers
will evaluate them seriously.
After you submit the feedback, you can post the link here which will be beneficial for other members with the similar issue.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

Visual Studio 2013 Ultimate Installation

Hello
Need help installing VS2013, once i click install it gives the following message:
"setup detected an issue during the operation
please click below for solution
a problem caused the program to stop........"
Please assist in a solution
NB: Using ISO image from MSDN to install, on a Windows 7 PC with SP1

Hi,
It seems your install package is corrupted. As your pvdg42 says, do you check the SHA-1 for the downloaded ISO. If not, please use the tool in below link to check your ISO checksum.
http://support.microsoft.com/kb/841290
If the SHA-1 may not same to the Visual Studio 2013 Ultimate, you should try to download the ISO again or try to install by web downloader.
If the errors also occurs,
please use http://aka.ms/vscollect to gather the installation logs. You will find vslogs.cab from %temp% folder. Then upload the file to
https://onedrive.live.com/ and share the link here.
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

Not able to properly install "Tools for Apache Cordova for Visual Studio 2013"

Hi,
I am using visual studio 2013 ultimate running on a 64-bit windows 7 home premium.
When I tried to install the "Tools for Apache Cordova for Visual Studio 2013", the installation completed but showed the following error in the end. This is what the error says:
" Joyent Node.js
Invalid command line argument. Consult the Windows Installer SDK for detailed command line help. "
I thought maybe windows phone SDK 8 is not installed on my pc.( as mentioned in the requirements here: https://msdn.microsoft.com/en-in/library/dn757054.aspx). I tried to install the SDK, by choosing modify from the control panel (as
mentioned in the same link above), but it didn't show "Windows Phone SDK" on the list. And Microsoft says that you cannot install the SDK v8.0 on windows 7. Please help me with this.

OK...
1) So, how do I write JavaScript code? There is only one option when I select JavaScript form the "New Project" window and that says "Blank App (Apache Cordova)". when I try to create one it shows all these errors:
" We've detected issues with your system's environment configuration
Apple iTunes - software is missing from your computer.
WebSocket4Net - software is missing from you computer. You may also have to configure it after installation."
2) I don't have iTunes on my computer. So, Is there a way to do it without installing iTunes?
3) And I've already installed the "WebSocket4Net", using both the "vs2013_mda0.3" setup and manually. But nothing worked. So what to do about it.?

Visual studio 2013 Installation professional

Report features are not installed while installing visual studio 2013 professional .
even-tho we selected all the features at the time of visual studio 2013 professional installation.
System is Up-to-date .
windows 7 Professional with 64-bit OS .
Latest 4.5.1 framework has been installed .
Report viewer 2012 run time and report viewer 2011 has been installed successfully .
Sql management Studio 2012 with all the features has been Enabled with Business Intelligent Tool has been enabled.
Please help us to sort out this problem .
Thanks in advance .

I get the following errors when trying to compile any type of project after an install visual studio 2013 professional with update 4 on a computer that has no access to the internet. No previous versions of visual studio have been on the machine.
Warning MSB8003: Could not find windowssdkdir from the registry. Target framework version or platform toolset may be set to an invalid version number.
Error LNK 1104: cannot open file kernel32.lib
Any ideas?
Did you see if any of the search results provided by Google typing the exact error message can help?
Alessandro Del Sole
Microsoft MVP - Visual Basic: development
http://community.visual-basic.it/alessandro/

Disable CRL checking for Visual Studio 2013 Installation on Domain Server with No Internet Connection

Hello,
I am having trouble installing certain packages that are digitally signed in the Visual Studio 2013 installation process. There's an attempt to determine whether or not a certificate has been revoked or not, and crl.microsoft.com is not available on the
server in question and therefore the certificate fails this test. The packages as a result fail to install and each has the following reason "A certificate chain could not be built to a trusted root authority." So the VS 2013 installation completes
yet SSDT and a few other packages are not installed.
There must be a way to install VS 2013 on a server without access to the Internet. The server is Windows Server 2008 R2 and is joined to a domain. Does anyone know how?
Thank you.

Can you check the signature and confirm that the chain is complete? My guess is that the problem is not in revocation checking, but in chain building.
My weblog: en-us.sysadmins.lv
PowerShell PKI Module: pspki.codeplex.com
PowerShell Cmdlet Help Editor pscmdlethelpeditor.codeplex.com
Check out new: SSL Certificate Verifier
Check out new:
PowerShell FCIV tool.
I think you are correct. Thanks. There were revocation errors continuously (events 42, 41, 11, 10, and 40) but when I went and looked at the packages that failed in the ISO and right-clicked on them in Windows Explorer, then navigated to the Digital Signature
tab and viewed the certificate I noticed that the root cert Microsoft Root Certificate Authority 2011 was not installed on the server. I found a Microsoft KB download that had the 2010 and 2011 MS Root certs in it (http://www.microsoft.com/en-us/download/details.aspx?id=6149)
and installed it. This installed WAY too many root certs of different CAs. Though I'm in the process of reinstalling VS 2013 and I think it will work now.
Is there a way to do this in a more deliberate fashion? How would I go about assessing each packages' certificate that failed and determining the chain of certs I need to build, then downloading these certs, and then testing them? The least
privilege, or fewest certificates way...
Thank you.

Visual Studio 2013 Setup and Installation gets stuck at system restore point. what are the issues?, help me out!!!

Visual Studio 2013 Setup and Installation gets stuck at system restore point. what are the issues?, help me out ASAP

Hello nitinrathod29,
There are some possible fixes for this issue.
Please check the following thread:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/47bc6990-00f2-4d85-b3f8-9de03c637f43/visual-studio-2013-update-2rc-stucks-on-creating-system-restore?forum=vssetup
https://social.msdn.microsoft.com/Forums/vstudio/en-US/81478f51-37bb-4dbb-bd0c-beade1fd50ab/visual-studio-2012-professional-installation-getting-stuck-creating-a-system-restore-point?forum=vssetup
So here are them:
1. Check if you have any software which may prevent the installer from running. For example, Windows Defender or any other software which may restrict your permissions.
2. Just start the computer.
3. Run the setup as admin.
4. Check your UAC permissions.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Visual Studio 2013 Ultimate with Update 4 Installation Hangs on "Windows Software Development Kit" step

Hi,
I am attempting to install Visual Studio 2013 Ultimate with Update 4 on a Windows 2008 Server R2 machine that also has Visual Studio 2012 Ultimate already installed.
Unfortunately, the installation always hangs on the "Windows Software Development Kit" step. I have let it run overnight and the installation process never gets past this step. I always have to just kill the process, and uninstall.
I have validated the checksum of the ISO, run the .exe as administrator, and also tried to install the software to both the C and D drive.
I have also tried to run the installation with all of the optional components checked as well as with none of the optional components checked.
In addition, I have uninstalled visual studio 2013 using the /uninstall /force command
I have examined the log files produced at C:\Users\MYNAME\AppData\Local\Temp and I dont see anything obviously wrong.
Here are the last few lines of the dd_vs_ultimate_20150109195533_225_Windows_SDK_Desktop.log file
MSI (s) (DC:F0) [20:18:20:263]: Note: 1: 1402 2: UNKNOWN\Installer\Features\A2FE5D06C0E403C2836F952CE631F4A4 3: 2
MSI (s) (DC:F0) [20:18:20:264]: Executing op: FeatureUnpublish(Feature=fe1d729f658fb745208c65956a0785d1b5,,Absent=2,Component=-N^qZe,c5?d.aP0.TOGN'+)%sZY@1xERdO]t)Sp,GXiq3m.l3EZ%Ox4io*FIQjbhz+j*zDWXXjMlUqpxp76U.08$^E=~()4a*jQRrsrMS.QvXF4uY819FP4s^d9K5=JH2CbML)ukS5l7@u%qQhykqD+hxS=.~k}N@%y_t159JF&4~{x$t&nJ)
MSI (s) (DC:F0) [20:18:20:265]: Note: 1: 1402 2: UNKNOWN\Installer\Features\A2FE5D06C0E403C2836F952CE631F4A4 3: 2
MSI (s) (DC:F0) [20:18:20:266]: Executing op: ActionStart(Name=RemoveFiles,Description=Removing files,Template=File: [1], Directory: [9])
MSI (s) (DC:F0) [20:18:20:266]: Executing op: ProgressTotal(Total=2698,Type=1,ByteEquivalent=175000)
MSI (s) (DC:F0) [20:18:20:267]: Executing op: SetTargetFolder(Folder=C:\Program Files (x86)\Windows Kits\8.0\bin\x86\)
MSI (s) (DC:F0) [20:18:20:267]: Executing op: FileRemove(,FileName=Orca-x86_en-us.msi,,ComponentId={FE5AB6C3-6785-5A16-91A2-857596456EF8})
Does anyone have any ideas of why this is happening? Are there any specific log files I could provide to help pinpoint the problem?
Thanks
Thomas

Hello Thomas,
"I have validated the checksum of the ISO" Do you mean you have used this page
http://www.visualstudio.com/en-us/downloads/visual-studio-2013-iso-sha1-vs.aspx# to verify your ISO?
Please send your full logs to me by use http://aka.ms/vscollect . After using it, you will find vslogs.cab from %temp% folder. Please upload the file to
https://skydrive.live.com/
and share the link here.
Actually you can refer to the following page to troubleshoot Windows SDK issue:
http://msdn.microsoft.com/en-us/library/ee248512(v=vs.100).aspx
The recommend way is to manually install Windows SDK itself and check the logs in detail.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Visual Studio 2013 installation

Hi ,
After a long struggle I am raising a question. why visual studio installation process is not user friendly . There is no revert options or pause option. Nearly whole day spent to download the visual studio 2013
. After a long search in bing , I just get know about AppData / Temp folder to see the logs for installation.
If internet got disconnected while downloading ,there is no response from the installer (thinking its downloading the content ).Even if cancelled the installation then the entire download got revert backed.
Please kindly reply me the steps to check the progress of downloading files and need to download.
Lavanya S

Hi ,
To troubleshoot this issue , I need to confirm some information in the following:
Could you let me know if you have changed default path when installing visual studio 2013? If you changed default path when installing
visual studio 2013,you should you find the file in the relevant path.
What’s the edition ( Visual Studio 2013 for web/Windows/Windows Desktop/Windows Phone or Microsoft Visual Studio Team
Foundation Server Express 2013 ) ?
Please let me know whether you download visual studio 2013 from our official website or not .
If you don’t download visual studio 2013 from our official website ,I would
like to suggest you to download Visual studio 2013 from our official website and reinstall again.
4. Please check out if your OS meet
System Requirements.
For information about system requirements for Visual Studio 2013, platform targeting, and supported upgrade paths, see
System requirements and platform compatibility
Hope these help.
Lilia Gong <THE CONTENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS OR IMPLIED>
Thanks
MSDN Community Support
Please remember to "Mark as Answer" the responses that resolved your issue. It is a common way to recognize those who have helped you, and makes it easier for other visitors to find the resolution later.

Visual Studio 2013 - which edition for a BizTalk 2013 installation ?

Hi there,
What is the lowest edition of VS2013 that will do for BT2013 ?
Is it necessary to go for ultimate or is one of the test editions enough ?

If you're checking the lowest Visual Studio edition for saving cost, then Professional edition should do.
FYI:
For BizTalk 2013, it Visual Studio 2012. And for Visual Studio 2013 is for BizTalk 2013 R2 (not 2013)
And as pointed out, "Test Professional" is not for testing.
Have a look here for the comparison for features among the Visual studio editions.
http://www.visualstudio.com/en-us/products/compare-visual-studio-products-vs.aspx
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Visual studio 2013 doesn't work after win10 installation

errors in EditorPackage loading, can't apply settings, i can't even see the code - it says: no exports were found that match the constraint.

Hi refaedi1,
In addition to what Noel suggested, regarding the error message, please also take a check of the following blog:
Fix Visual Studio Error “No exports were found that match the constraint”
Just delete or rename this folder:
%AppData%\..\Local\Microsoft\VisualStudio\11.0\ComponentModelCache
or
%AppData%\..\Local\Microsoft\VPDExpress\11.0\ComponentModelCache
For Visual Studio 2013, change the version number:
%AppData%\..\Local\Microsoft\VisualStudio\12.0\ComponentModelCache
Restart Visual Studio.
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Can't Create New Excel Project Visual Studio 2013 Office Tools The Project Cannot Be Created

I am having this issue on two computers. If I try to create an Excel 2013 Workbook C# in new projects, and choose create a new workbook, it starts to open Excel, and then I get this error in VS
I have tried:
Uninstall & Reinstall of VSTO from the Visual Studio Installer
Uninstall & Reinstall of Visual Studio 2013 Ultimate, (manually removing anything with visual studio that was left over)
Manually turning on the add-on Visual Studio Tools for Office Design-Time Adapter for Excel
Installing VSTO by hand
Enabling Macros
Running VS as administrator
Uninstalling & Reinstalling Office 2013 Pro Plus OLP
I have made this change to excel:
Like I said, this problem occurs on TWO pc's. I have tried 2013 Visual Studio R1 and R2. Does anyone have any ideas?
Edit 3-1-2015
There is still no answer to this, I have tried target frameworks:
4.0
4.5
4.51
And Running as Administrator. Recently I upgraded to the CTP of Visual Studio 2015 Ultimate and the same problem exists.

Thanks for the reply.
The issue is not reproducible for me and I can confirm this not a known issue. We might need to do deeper troubleshooting at the repro machines.
Because of its complexity your question falls into the paid support category which requires a more in-depth level of support. If the support engineer determines that the issue is the result
of a bug the service request will be a no-charge case and you won't be charged. Please visit the below link to see the various paid support options that are available to better meet your needs.
http://support.microsoft.com/default.aspx?id=fh;en-us;offerprophone
Sangeeth,MSFT

Visual Studio 2013 - New Project

Hi
Many years ago I wrote a VB6 program for school students for diet analysis in terms of energy and a range of vitamins and minerals. It drew comparisons against the national guidelines. Results were tabulated, graphed and output provided in Word
and Excel files. The VB6 program used an Access database containing about 850 foods. It has been used by quite a few schools and appears to always be used across a network.
My intention is to re-write the whole program in Visual Studio 2013 using Visual Basic code. I intend to refresh the whole program and add a wider range of foods and update the comparisons using the latest national guidelines and food label formats.
This will be my first attempt at Visual Studio and I intend to use a Windows Forms Application approach. The data used is "static" - it does not change it is simply a "read only" file - get the data, multiply for mass and add up each
category (energy, vitamins and minerals). It is a "file of data" rather than a true database. In reality a 1000 food data file should only be about 200 Kbytes. As an Excel file it is only 150Kbytes but as an Access file it is bloated
up to a 550Kbyte file.
The program is not sophisticated, so, should I be using a WPF Application or a Window Forms Application? The WFA just feels a bit more familiar than a WPF. Also, the program is intended for loading onto a network at some schools or on a stand-alone
computer.
My greatest concern is about the choice of approaching the data. A "true" database is not needed because the data is simply for about 1000 rows of food each with about 20 columns of data (numeric and text). The Access file is simple
but I could create an mdf file (I think) but would that be an advantage? With the Access data I appear to have loaded the file and created a DataAdapter and I have experimented with GetData() which works. My attempts to use ExecuteReader() failed
completely. Is there a better approach? such as SQL "DataTable.Rows(RowPosition)(“column name")”?? It seems a very sophisticated method for a small file of data.
The Access Database that I have experimented with in VS2013 appears to use Jet Drivers???? which proved to create a few problems for installations in the past. Should I be using an mdf file approach?? I will need to distribute the data in a "resx"
file. I could use SQL Server Management Studio (free download) and then use VS2013 to read the Access file and build a new mdf database.....
I am not convinced that I have the best solution. Any comments and suggestions would be very greatly appreciated.
Many thanks for reading this far.
Winchestermili
Winchestermili

Frank
Looking good! The "attachment" to a new project worked first time.
I can see all the new Classes by hovering a pointer over the "declarations" above "Public Class Form1"
Seems to access the VBNetForum URL quite quickly using a high speed BB connection.
I am greatly looking forward to the next stage...........
Regards
Keith
Winchestermili
Keith,
I intentionally truncated that post with “let me know when you’re that far along” simply because it’s very easy to get lost
with a concept that’s new. This isn’t as different as you might think though – you’ve been using a database, and now you’ll be using instances of a class (various ones).
Over the years here, I’ve seen many times where people use databases because they assume “that’s the only way to do it”. The
“it” actually being encapsulation.
Encapsulation
is what they need and certainly a database provides that (and a lot more), but it’s not the only way it can be done.
Think about this a bit: A DataRow encapsulates the related data for whatever it is. For example maybe it’s a person’s data –
you’d want to keep the person’s first name, surname, and things like that all together because it defines something related to that one person. You then have a collection of those DataRows in a DataTable.
In much the same way, what I have here is similar: Instead of a DataRow, I’m using instances of a class. Instead of columns
in a DataRow, I’m using properties of the instance, and instead of a DataTable, I’m using a List(Of Class).
…the concept is identical.
Classes are a means of building an object in OOP. In and of itself, it’s really just a template or a blueprint (overused metaphor).
Deborah Kurata put it best, in my opinion, when she said that a class is like a cookie-cutter and the objects created are cookies. You eat the cookies, not the cookie-cutter!
A class works that way exactly: You can’t “consume” a class; you consume the objects (instances) created by them and in this
case, like a DataTable housing DataRows, I’m storing them in a very specific type of collection known as a List(Of T).
I don’t want to get too far adrift about classes and/or OOP here – not that I would mind the discussion – but it’s a new concept
to you and it’s easy to get confused about what’s doing what. I’ll get more to the specifics next.
That entire class library is the data layer; it doesn’t work with controls of any sort, only the data.
That said though, in the following I’ll explain how controls can be ‘assisted’ by the methods in the classes.
The main class in this is the one called “FoodComposition”. That one is only barely started – the
only
method in it so far is an overloaded way to add a new instance to a list of them.
Two of the classes are really just ‘supporting classes’ – those being the ones called “FoodCategory” and “LabelNote”. Don’t
get me wrong here, they do have methods in them (with more to be added), but you won’t too much be working with those in the user’s program – you will in the program that I’ll create for you to add/modify/remove* and so on, but for now let’s set those two
aside.
* The fact that these are “supporting” classes, I have it set up such that you cannot remove an instance of those if there’s
a reference to them in FoodComposition. If you want to see where/how I’m doing that, look at the code of the class FoodCategory, for example, and go to line 633, then read the code of that method named “Remove”.
The one class in the bunch which is pretty much self-contained is the one called DietaryReferenceValue (DRV is the name you
used). That one makes for a good topic to explain how I can provide methods which lend a helping hand to your controls but don’t, directly, have anything to do with controls.
I have a method in that class named “GetAllGroupNames” which is a function that returns a string array containing the names
of each instance’s group. That might be used, for example, if you wanted to show a ListBox or a ComboBox to allow the user to select one of the group names:
Private Sub Form1_Load(ByVal sender As System.Object, _
ByVal e As System.EventArgs) _
Handles MyBase.Load
Dim url As String = _
"http://www.fls-online.com/VBNet_Forum/12-13-14/NutritionData.xml"
GetNutritonData(url)
ListBox1.Items.AddRange(NutritionData.DietaryReferenceValue.GetAllGroupNames(drvList))
End Sub
So, for example, when the user selects one of them:
Private Sub ListBox1_SelectedIndexChanged(ByVal sender As System.Object, _
ByVal e As System.EventArgs) _
Handles ListBox1.SelectedIndexChanged
Try
If ListBox1.SelectedIndex > -1 Then
Dim selectedGroup As String = _
ListBox1.Items(ListBox1.SelectedIndex).ToString
Dim drv As NutritionData.DietaryReferenceValue = _
NutritionData.DietaryReferenceValue.GetInstance(drvList, selectedGroup)
MessageBox.Show(drv.ToString, drv.SexAndAgeGroup)
End If
Catch ex As Exception
MessageBox.Show("An error occurred:" & vbCrLf & vbCrLf & ex.Message, _
"Program Error", MessageBoxButtons.OK, _
MessageBoxIcon.Warning)
End Try
End Sub
As you can see there, I’m using the .ToString method which I have overridden in the class. That’s also part of what I wanted
to discuss: What it gets.
Currently I don’t have much else (other than maintenance routines like adding, removing, renaming) in there; the methods that
you use are methods that I set up – but in the words of Hamlet, “therein lies the rub” … I don’t know what you want!
Give some thought to just what methods you might want to have in there. For example maybe you might want to have a method which
will return the value of one specific nutrient which you specify. I can do that, I just don’t know yet that you want it so it’s not there.
Quite often I’ll also provide what I’m come to call “convenience properties”. For example with the property named “Sodium”,
I might have another property (read-only) named “Sodium_String” which returns a string in whatever format you wanted it to have.
These are things I don’t know that you want and also things which you may not have known can be done, thus this writing. ;-)
The other day I asked about units. It may not be where you want to go with this but I’d also like to offer that we can provide
more granularity to the nutrients themselves. Don’t get me wrong, it’d be an overhaul of what I have right now, but I’ll do it if you want to proceed:
Imagine that we have a class, all by itself, that we call “Nutrients”. At the very least that class would have members like
Name and UnitOfMeasure, but it could have anything else you wanted. An example that comes to mind might be the URL to a page on Wikipedia about it, or maybe a URL to an appropriate image or … whatever you dream of here.
So then when using them in the other classes, “Calcium” would, itself, be an object which has a name (“Calcium”), a unit-of-measure
(maybe “milligram”), and so on.
It’s a lot to take in all at once and even this is something you may want to reread, but do give it thought. Let me know what
methods you want in the classes which will help you in your user’s program.
Still lost in code, just at a little higher level.

Visual Studio 2013 problem setting localhost alias in IIS Express

I'm trying to define an alias to localhost in development ambient in Visual Studio 2013.
When I used previous versions of Visual Studio, I used the Visual Studio Development Server to debug and the only thing I needed to do was to change my hosts file adding this entry:
127.0.0.1 localhost
127.0.0.1 localhostalias
I'm having problems to do this with VS2013. I've browsed all over the internet and I've tried the following things, but I'd like someone of you to tell me what am I doing wrong. I've obviously already changed the hosts file...
In the web project Properties -> Web in the section Servers where IIS Express is selected as default, I tried changing http://localhost:53944 to http://localhostalias:53944 but an error is showed saying: "Unable to create the virtual directory. Cannot
create the Web site 'http://localhostalias:53944'. You must specify "localhost" for the server name".
I also tried changing the applicationhost.config which is located in <<Documents>>\IISExpress\config to
<site name="<<Site name>>" id="2">
<application path="/" applicationPool="Clr4IntegratedAppPool">
<virtualDirectory path="/" physicalPath="<<Site Path>>" />
</application>
<bindings>
<binding protocol="http" bindingInformation="*:53944:*" />
</bindings>
</site>
And when I opened the project it was changed to
<site name="<<Site name>>" id="2">
<application path="/" applicationPool="Clr4IntegratedAppPool">
<virtualDirectory path="/" physicalPath="<<Site Path>>" />
</application>
<bindings>
<binding protocol="http" bindingInformation="*:53944:*" />
</bindings>
</site>
<site name="<<Site name>>(1)" id="3">
<application path="/" applicationPool="Clr4IntegratedAppPool">
<virtualDirectory path="/" physicalPath="<<Site Path>>" />
</application>
<bindings>
<binding protocol="http" bindingInformation="*:53944:localhost" />
</bindings>
</site>
Can someone help me?
Thanks in advance,
Camilo

Hello Camilo,
This forum supports "setup and deployment of .NET Framework.", if there is something about the installation of .NET Framework, you can post it here. I read your post and I think you should post it under
IIS forum instead.
Regards,
Barry Wang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Visual Studio 2013 slows down + crashes when using Source Control features.

I have spent two full days trying to resolve this issue but no luck so here we go,
I have created a project using Visual Studio Team Foundation Server plug-in in the past. Later on I switched to
Microsoft Git Provider.
Now when I connect to that project in the Team Explorer and double click on the solution to work on it locally it somehow changes the plug in to Microsoft Git Provider automatically and of course I can't
Commit/Commit and Push since I receive following error in the Team Explorer,
An error occurred. Detailed message: Failed to open directory 'C:/Users/.../AppData/Local/Application Data/'
Manually changing the plug-in to the Visual Studio Team Foundation Server
results in a broken Team Explorer as below,
With Settings leading to an empty pane, and also a warning in the Team Explorer's Changes page telling me the message below if I click on Pending Changes...
Microsoft Git Provider is not the current Source Control plug-in. Change Plug-in
And manually selecting the solution from Solution Explorer, right click and
Add Solution to Source Control, leads to never ending hour glass and (Not responding) visual studio.
New Projects
Creating a new project is straight forward, unless I "Add to Source Control" is checked. If so, again never ending process if Microsoft TFS plug-in is selected in the tools and eventually me Ending the Visual Studio task. And a VERY long process
(40+ mins) if I have chosen Microsoft Git but that finishes successfully rather.
New TFS project from Team Explorer
If I create a new project in my Online Web Studio
Click on Open with Visual Studio Link => Opens and connects to a my newly created TFS in team explorer.
Clicking new in Team Explorer under Solutions to create a new solution and bind it to this Repo
leads to straight crash of Visual Studio and restarting attempt of VS.
So I really can't use Source Control from visual studio other than cloning GitHub's existing repo's on Visual Studio and Committing my current Microsoft Git managed projects.
I have attempted
Repairing Visual Studio (no luck in results)
Devenv.exe /setup (no luck)
Trying to scrap the SCC info on my solution then at least it won't get picked up by source control then I can Check it in as a new project. (no luck and the solution picks the Microsoft Git upon opening it by clicking on the .sln file.) I have followed
these steps in this stack overflow answer.
And lots of mucking around like removing my workspaces almost Thousand times and putting them back, binding and etc.
I am really stuck on this and it's holding me back from staring a new project (which is problematic using Adding to Source Control) and unfortunately is dependent on the old project (which is developed under Visual Studio Team Foundation Server Plug-in which
is throwing tantrums)
Would like to hear you pro-s input on this
Using
Visual Studio 2013 Community edition (recently switched from Pro to Express to Community)
Windows 7 (64-bit)
Git tools
Git windows installation
Nuget Package manager
Visual Studio Log File
http://filesave.me/file/50620/log-txt.html
Mehradzie

Hi Mehradzie,
Based on the description, seems you're working with Git team project in Visual Studio Online(formerly Team Foundation Service). I'd like to know whether you mean Visual Studio Git command tool as the plug-in, and if you're trying to create solutions/projects
with Visual Studio and add them to the created Git team project.
From the screenshot, you're not connect to the Git team project by using Team Explorer. To work with Git team project locally, you can follow the instructions as below:
Connect to Git team project by using Team Explorer, after that you might install Git tools if you connect to the team project for the first time
Clone the remote Git repository to a local git repository and set the path to local git repository
Create a solution and select Git source control, also saved to the local path of the local git repository
Select your branch, and then click "Changes" and Commit the changes
Click "unsynced commits" and push the commit to remote git repository
You can also refer to the links below for more information about getting started with Git in Visual Studio Online.
http://www.visualstudio.com/en-us/get-started/share-your-code-in-git-vs.aspx
http://blogs.msdn.com/b/visualstudioalm/archive/2013/01/30/getting-started-with-git-in-visual-studio-and-team-foundation-service.aspx
If you still have any other concerns, please elaborate more details about your scenario. Thanks for your understanding.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Windows Azure Tools for Visual Studio 2013 - v2.2 install fails on Windows Server 2012 R2

Microsoft Visual Studio Professional 2013
Version 12.0.21005.1 REL
Microsoft .NET Framework
Version 4.5.51641
The installation completes without any errors on my VM running Windows Server 2012 R2, however its not recognized in VS2013 ? It also breaks the Publish functionality when I try and publish a web site to my hosting provider.

I tried install, uninstall, reinstall cycle several times without success. Any help would be greatly appreciated.
here is my About info:
Microsoft Visual Studio Professional 2013
Version 12.0.21005.1 REL
Microsoft .NET Framework
Version 4.5.51641
Installed Version: Professional
LightSwitch for Visual Studio 2013   06177-004-0444002-02824
Microsoft LightSwitch for Visual Studio 2013
Microsoft Office Developer Tools for Visual Studio 2013 ENU   06177-004-0444002-02824
Microsoft Office Developer Tools for Visual Studio 2013 ENU
Team Explorer for Visual Studio 2013   06177-004-0444002-02824
Microsoft Team Explorer for Visual Studio 2013
Visual Basic 2013   06177-004-0444002-02824
Microsoft Visual Basic 2013
Visual C# 2013   06177-004-0444002-02824
Microsoft Visual C# 2013
Visual C++ 2013   06177-004-0444002-02824
Microsoft Visual C++ 2013
Visual F# 2013   06177-004-0444002-02824
Microsoft Visual F# 2013
Visual Studio 2013 Code Analysis Spell Checker   06177-004-0444002-02824
Microsoft® Visual Studio® 2013 Code Analysis Spell Checker
Portions of International CorrectSpell™ spelling correction system © 1993 by Lernout & Hauspie Speech Products N.V. All rights reserved.
The American Heritage® Dictionary of the English Language, Third Edition Copyright © 1992 Houghton Mifflin Company. Electronic version licensed from Lernout & Hauspie Speech Products N.V. All rights reserved.
ASP.NET Web Frameworks and Tools 2012.2   4.1.21001.0
For additional information, visit http://go.microsoft.com/fwlink/?LinkID=309563
ASP.NET Web Frameworks and Tools 2013   5.0.11001.0
For additional information, visit http://www.asp.net/
BusinessObjectEditor   1.0
Information about my package
CodeRush for Visual Studio   13.2
Common Azure Tools   1.0
Provides common services for use by Azure Mobile Services and Windows Azure Tools.
CreateLayoutWizardPkg   1.0
Create layout wizard.
DevExpress.ExpressApp.Design.DesignDynamicPackage   1.0
DevExpress VSIX Package
DevExpress.ExpressApp.DesignPackage   1.0
DevExpress VSIX Package
DevExtreme.Design   13.2.6
DevExtreme Visual Studio integration package
DXCore for Visual Studio   13.2
DXCore for Visual Studio
PreEmptive Analytics Visualizer   1.2
Microsoft Visual Studio extension to visualize aggregated summaries from the PreEmptive Analytics product.
SQL Server Data Tools   12.0.30919.1
Microsoft SQL Server Data Tools
Windows Azure Mobile Services Tools   1.0
Windows Azure Mobile Services Tools
Workflow Manager Tools 1.0   1.0
This package contains the necessary Visual Studio integration components for Workflow Manager.
XtraReports package   1.0
XtraReports package

Visual Studio 2013 - Cordova Installation

Similar Messages

Maybe you are looking for