Visual Studio and Crystal

We cannot open a Crystal 2008 report with Visual Studio 2005
Is this just a backward compatibility issue or are we missing somthing?

If you're using Crystal Reports Basic for Visual Studio 2005 (CR.NET version 10.2) to try and open a Crystal Reports 2008 report (version 12.0), then you're encountering a forwards-compatibility issues, for which there is no guarantee.
If you install Crystal Reports 2008 onto your VS 2005 machine, then you'd get the updated 12.0 components integrated into VS 2005.
Sincerely,
Ted Ueda

Similar Messages

I need to add a new report to the application that is done using visual studio and SSRS and SQL Server 2008

I have an application that is done using SSRS on visual studio and it connects to the report server on SQL server 2008 environment.
I've been changing the existing reports using visual studio 2008 and modifying the reports on the report server. How do I add a new report to the application ? I created a new report and deployed it on the report server but it didn't show up in the application.
I can access the application source code on visual studio 2010 and TFS (Team Foundation). Thanks.

Hi,
I have a question. This application retrieves SSRS reports from the report sever. When I download the reports
from the SQL Server I can open them in visual studio 2008 but they don't open in visual studio 2010. I can access the application files on visual studio 2010 and team foundation server 2010. I was unable to open team foundation server 2008 on visual studio
2008. The issue is that I am unable to add a report with a new name to the application. I use visual studio 2008 to deploy the reports on the report server but it has to be the same name to be able to run the report from the application. I can deploy any report
on the report server but I can't access it from the application unless it has to be the same name as the present reports. If I keep the report the same name then it will replace the old report and the new report will run from the application. But only if it's
the same name. I guess when I add a new report to the application with a new name I am supposed to add a definition in the application C sharp files on visual studio 2010 so that the new report will show in the application. What's your opinion
? I have attached 2 images of the application and team foundation server 2010 and the report server.
Thanks.

Hi, I would like to know if is it possible to install windows on mac pro , because I need to have some application like SQL server and visual studio, and they could not be install on mac

hi, I would like to know if is it possible to install windows on macbook pro , because I need to have some application like SQL server and visual studio, and they could not be install on mac

Windows on a Mac

C# Getting path of folder that is created in Visual Studio and it's located in app directory.

Alright i created folder that will contain video resources for my app.But now i need to connect it with my code.I need to get file path of folder that i created in Visual Studio,but it needs to work on other machines.I tryed Path.Combined(Environment.GetCurrentDirectory
+ @"Video\Lekcija1.mp4") but it didn't work.Any suggestions?

If you set the Build Action of the Lekcija1.mp4 file to Content (right-click on the file in the Solution Explorer in Visual Studio) and the Copy To Output Directory property to Copy always or Copy if newer you could use the following code to get the absolute
path to the file:
string codeBase = System.Reflection.Assembly.GetExecutingAssembly().CodeBase;
string fullPath = System.IO.Path.GetDirectoryName(codeBase) + "\\Video\\Lekcija1.mp4";
Hope that helps.
Please remember to mark helpful posts as answer to close your threads and please start a new thread if you have a new question.

After i install Visual-Studio 2013 crystal-report not working

hi
after i install Visual-Studio 2013 crystal-report not working on my Visual-Studio 2010 projects
when i try to open crystal-report i see this:

Hi E_gold,
Crystal Reports forum may be a better place for you.
Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Crystal Reports for Visual Studio and (Wcf) Web Services

I´m evaluating Crystal reports for Visual Studio 2010. I want to read data from a (Wcf) Webservice into the predefined Reports and deliver them to the Users in an ASP.NET Application. As far as I see reading Webservices via the XML/Webservice datasource works good in the Crystal Reports 2011 Applications - But I have Problems with the Integration of the XML/Webservice datasource in the CRVS2010 Environment.
I read your Article on sdn: http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/13732
which helped us to enable the XML Datasource in the CRVS2010 environment on a Machine where Crystal Reports 2011 and VS2010 is installed, but this required copying DLL´s and installing the JRE.
But I´m not able to run the XML/Webservices datasource on a webserver in a ASP.NET Application where Crystal Reports 2011 is not installed (only the runtime) - the above post doesn´t help because the path structure is completely different on my machine. Is there a manual, which helps me to enable the XML datasoucre and the CRVS2010 runtime ?
I´m not sure if reading XML is the best practice for a new Project, especially after reading your article at http://forums.sdn.sap.com/thread.jspa?threadID=1952093
I´m now evaluating ADO.NET XML as mentioned in your article, but I´m not sure if this is the right decision.
Is there a a new version for Visual Studio 2010 of the u2022csharp_web_adonet.zip example ?
BTW: All examples in the Sample Code for Crystal reports for Visual Studio 2010 reference Assemblies in Version 14, which are not present on my machine. I had to find/replave 14 through 13, before they are compilable. Did I made a mistake during installation ?

Hi Henrik,
First of all you didn't make any mistake installing CRVS2010. It has assemblies with version 13.x
Now as far as patches are concerned ensure that you are on SP2. You can get runtime and patch from following:
http://www.sdn.sap.com/irj/sdn/crystal-xcelsius-support?rid=/webcontent/uuid/d01fdad8-44e5-2d10-61ad-9d2d4158f3a8
You can opt for AD.NET as one of the datasource but what is the error/ warning you get when you use Web Serive as datasource?
You can find the latest samples created for CR2008 here
http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/d0bf8496-2a81-2b10-95ac-b1f48d5b63f5
- Saurabh

Visual Studio 2013 Crystal Report V9 does not display in browser

Hello, I work with Visual Studio 2013, and was anxious for version 13.0.9.1312, glad you came. Well I installed the full version and the report usually opened in VS, but when it does not compile command displays. Published in a local and it worked, but the VS does not work, if you click with the right mouse button to display codes are the codes it, but does not show. I used IE, and nothing Chomo. How does VS2013 use IIS Express as a server. Have any solution for this?

See this post for the answer...
Re: Crystal Reports does not load aspnet_client files to proper IISExpress directory
Don

How open a report with Viewer 2008 without using Visual Studio and Java

Hi,
There is a way to open a report (with parameters) save in a web server with Crystal Report Viewer 2008 without using Visual Studio or Java ?
I've an asp page and i want to open this report using some command (I know asp, vbscript and html)
In the past it was very easy because we use CR 9, but now it's already many days im looking for a solution but seem impossible.
I know the craxdrt.dll is not included with Crystal Reports 2008.
It seem me i can use OpenDocument, but i'm not sure. Someone has some easy example to help me ?
Remember i have only Crystal report viewer 2008 on the server and on the clients.
Thanks in advance

If you are looking to create a web application or view report through a web server using only Crystal Reports then you do have to either use Java, or .NET.
If you have Crystal Reports server or Business Objects Enterprise you can use OpenDocument to view managed reports but this does require one of our server products.
Trevor.

Visual Studio 2008 Crystal Report 10.5 merge modules download

Hi All,
I'm struggling with this problem about 2 weeks and still cannot find the resolution.
I was developed a .Net application with visual studio 2008 and using crystal report to generate report.
It is working fine in my local machine. However, after I deployed the application to web server with microsoft server 2003 64bits server. The report cannot open and I get this error The type initialize for 'crystaldecisions.crystalreports.engine.reportdocument' threw an exception.
I try to install the redistribution package from C:\Program Files\Microsoft SDKs\Windows\v6.0A\Bootstrapper\Packages\CrystalReports10_5 but it doesn't work.
Please kindly to help me thank you very much

Thank you Sir,
After I installed the msi I get this error retrieve from event log.
An unhandled exception occurred and the process was terminated.
Application ID: DefaultDomain
Process ID: 528
Exception: System.Runtime.Serialization.SerializationException
Message: Type 'CrystalDecisions.CrystalReports.Engine.LoadSaveReportException' in Assembly 'CrystalDecisions.Shared, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' is not marked as serializable.
StackTrace:    at System.Runtime.Serialization.Formatters.Binary.WriteObjectInfo.InitSerialize(Object obj, ISurrogateSelector surrogateSelector, StreamingContext context, SerObjectInfoInit serObjectInfoInit, IFormatterConverter converter, ObjectWriter objectWriter)
   at System.Runtime.Serialization.Formatters.Binary.WriteObjectInfo.Serialize(Object obj, ISurrogateSelector surrogateSelector, StreamingContext context, SerObjectInfoInit serObjectInfoInit, IFormatterConverter converter, ObjectWriter objectWriter)
   at System.Runtime.Serialization.Formatters.Binary.ObjectWriter.Write(WriteObjectInfo objectInfo, NameInfo memberNameInfo, NameInfo typeNameInfo)
   at System.Runtime.Serialization.Formatters.Binary.ObjectWriter.Serialize(Object graph, Header[] inHeaders, __BinaryWriter serWriter, Boolean fCheck)
   at System.Runtime.Serialization.Formatters.Binary.BinaryFormatter.Serialize(Stream serializationStream, Object graph, Header[] headers, Boolean fCheck)
   at System.Runtime.Remoting.Channels.CrossAppDomainSerializer.SerializeObject(Object obj, MemoryStream stm)
   at System.AppDomain.Serialize(Object o)
   at System.AppDomain.MarshalObject(Object o)
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

Visual Studio 2013 Crystal Report passing parameters

Hello Everyone,
I am simply trying to pass a parameter from my textbox called "StockID" to my crystal report which is called "testlbl.rpt". There is only one parameter in this report and it is called "m_stockid". I am using a crystal report viewer
and I have imported the report into the project so I am not loading it from outside. Below is an example of what I have tried. I have also attempted loading the report and using "SetParameterValue(...)". Can anyone please help me with this?
ParameterFields paramFields = new ParameterFields();
ParameterField pfStock = new ParameterField();
pfStock.ParameterFieldName = "m_stockid";
pfStock.CurrentValues.Add(0);
paramFields.Add(pfStock);
crystalReportViewer1.ParameterFieldInfo = paramFields;
crRpt.SetParameterValue(":m_rec", 0);
crRpt.SetParameterValue("@m_rec", 0);
crRpt.SetParameterValue("?m_rec", 0);
crRpt.SetParameterValue(testlbl1.Parameter_m_rec.ParameterFieldName, 0);
crRpt.SetParameterValue(0, 0);
crystalReportViewer1.ParameterFieldInfo = paramFields;
M.N.

Hi Boa_nerges,
Thank you for your post.
Since this forum is to discuss: Visual Studio WPF/SL Designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System, and Visual Studio Editor. So I’m afraid that it is not the
correct forum for this issue.
I suggest you can ask your issue directly on SAP Crystal Reports:
http://scn.sap.com/community/crystal-reports/content?filterID=content~objecttype~objecttype[thread]
for better solution and support
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to replace a dates on a SQL query on Visual Studio (and get the query to work in there in the first place)?

Morning all,
I've just been assigned a report-related project but I have not created much of anything in C# or .Net before!
I was wondering if someone could help me get started. Here are the specifications:
Basically, I am to create an automated report application. I have the query and I will include it further down
in this post. The page is to have a couple blanks to specify the Start Date and End Date and replace those dates in the query, and generate the report. What I need some help on is how to make the SQL query work in the application which I will connect to the
intended database to generate the report (basic I know, but I'm new at this) on Visual Studio 2010. I also need some help on programming the Start Date blank and End Date blank so that what the user types in for those blanks will replace the date fields in
the SQL query, then generate the report with the new dates.
I appreciate the help!
The SQL query and what the dates are replacing:
select
PTH.INST_ID ,
PTH.EMPLOYEE_ID,
DBH.HR_DEDUCTION_AND_BENEFITS_CODE,
replace(DB.DESCRIPTION,',',''),
DB.WITHHOLDING_LIABILITY_ACCOUNT_MASK,
DBH.HR_DEDUCTION_AND_BENEFITS_ID,
DBH.CHECK_DATE,
DBH.CHECK_NO,
DBH.FIN_INST_ACCT_ID,
replace(replace (DBH.COMMENT,CHAR(10),' '),CHAR(13),' '),
DBH.HR_DEDUCTION_AND_BENEFIT_CYCLE_CODE,
DBH.LENGTH,
DBH.EMPLOYEE_COMPUTED_AMOUNT,
DBH.EMPLOYEE_BANK_ROUTING_NUMBER,
DBH.EMPLOYEE_ACCOUNT_TYPE,
DBH.EMPLOYEE_ACCOUNT_NUMBER,
DBH.EMPLOYER_COMPUTED_AMOUNT,
DBH.EMPLOYEE_GROSS_AMOUNT,
DBH.EMPLOYER_GROSS_AMOUNT,
DBH.PAYROLL_EXCLUDE,
PTH.VOID_DATE,
PTH.BATCH_QUEUE_ID,
B.BATCH_CODE,
BQ.FY,
BQ.END_DATE,
BQ.COMMENTS,
BQ.BATCH_CRITERIA_USED,
BP.COLUMN_VALUE,
PTH.REPLACEMENT,
P.LAST_NAME,
P.FIRST_NAME,
P.MIDDLE_NAME
from PY_EMPLOYEE_TAX_HISTORY PTH
INNER JOIN PERSON_EMPLOYEE PE ON
PE.INST_ID=PTH.INST_ID AND
PE.EMPLOYEE_ID=PTH.EMPLOYEE_ID
INNER JOIN PERSON P ON
PE.INST_ID=P.INST_ID AND
PE.PERSON_ID=P.PERSON_ID
LEFT JOIN HR_EMPLOYEE_DEDUCTIONS_AND_BENEFITS_HISTORY DBH ON
PTH.INST_ID=DBH.INST_ID AND
PTH.CHECK_DATE=DBH.CHECK_DATE AND
PTH.CHECK_NO=DBH.CHECK_NO AND
PTH.EMPLOYEE_ID=DBH.EMPLOYEE_ID
LEFT JOIN HR_DEDUCTION_AND_BENEFITS DB ON
DB.INST_ID=DBH.INST_ID AND
DB.HR_DEDUCTION_AND_BENEFITS_CODE=DBH.HR_DEDUCTION_AND_BENEFITS_CODE
LEFT JOIN BATCH_QUEUE BQ ON
PTH.BATCH_QUEUE_ID=BQ.BATCH_QUEUE_ID
LEFT JOIN BATCH B ON
B.BATCH_CODE=BQ.BATCH_CODE
LEFT JOIN BATCH_PARAMETER BP ON
BQ.BATCH_QUEUE_ID=BP.BATCH_QUEUE_ID
AND BP.COLUMN_NAME = 'SUPPRESS_DIRECT_DEPOSIT'
------Please change the WHERE condition for date range of the month you need to run this for.
WHERE PTH.CHECK_DATE >='07/01/2013'
AND PTH.CHECK_DATE <='07/31/2013'
and BQ.BATCH_CODE='BAT_PY_PAYCALC'
and bq.fy=2014
ORDER BY PTH.INST_ID ,
PTH.EMPLOYEE_ID,
DBH.HR_DEDUCTION_AND_BENEFITS_CODE,
DBH.CHECK_DATE

Try this code. The Server name will be the same name when you use SQL Server Management Studio (SSMS). It is in the login window for SSMS. I assume you are using SQLSTANDARD (not SQLEXPRESS) which is in the connection string in the code
below. I also assume you have remote connection allowed in the database.
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Data;
using System.Data.SqlClient;
namespace ConsoleApplication1
class Program
const string DATABASE = "Enter Database Name Here";
const string SERVER = "Enter Server Name Here";
static void Main(string[] args)
DateTime startDate = DateTime.Parse("07/01/2013");
string startDateStr = startDate.ToString("MM/dd/yyyy");
DateTime endDate = new DateTime(startDate.Year, startDate.Month + 1, 1).AddDays(-1);
string endDateStr = endDate.ToString("MM/dd/yyyy");
string connStr = string.Format("Server={0}\\SQLSTANDARD;Database={1};Trusted_Connection= True;", SERVER,DATABASE);
string SQL = string.Format(
"select\n" +
" PTH.INST_ID\n" +
",PTH.EMPLOYEE_ID\n" +
",DBH.HR_DEDUCTION_AND_BENEFITS_CODE,\n" +
",replace(DB.DESCRIPTION,',','')\n" +
",DB.WITHHOLDING_LIABILITY_ACCOUNT_MASK\n" +
",DBH.HR_DEDUCTION_AND_BENEFITS_ID\n" +
",DBH.CHECK_DATE\n" +
",DBH.CHECK_NO\n" +
",DBH.FIN_INST_ACCT_ID\n" +
",replace(replace (DBH.COMMENT,CHAR(10),' '),CHAR(13),' ')\n" +
",DBH.HR_DEDUCTION_AND_BENEFIT_CYCLE_CODE\n" +
",DBH.LENGTH\n" +
",DBH.EMPLOYEE_COMPUTED_AMOUNT\n" +
",DBH.EMPLOYEE_BANK_ROUTING_NUMBER\n" +
",DBH.EMPLOYEE_ACCOUNT_TYPE\n" +
",DBH.EMPLOYEE_ACCOUNT_NUMBER\n" +
",DBH.EMPLOYER_COMPUTED_AMOUNT\n" +
",DBH.EMPLOYEE_GROSS_AMOUNT\n" +
",DBH.EMPLOYER_GROSS_AMOUNT\n" +
",DBH.PAYROLL_EXCLUDE\n" +
",PTH.VOID_DATE\n" +
",PTH.BATCH_QUEUE_ID\n" +
",B.BATCH_CODE\n" +
",BQ.FY\n" +
",BQ.END_DATE\n" +
",BQ.COMMENTS\n" +
",BQ.BATCH_CRITERIA_USED\n" +
",BP.COLUMN_VALUE\n" +
",PTH.REPLACEMENT\n" +
",P.LAST_NAME\n" +
",P.FIRST_NAME\n" +
",P.MIDDLE_NAME\n" +
" from PY_EMPLOYEE_TAX_HISTORY PTH\n" +
" INNER JOIN PERSON_EMPLOYEE PE ON\n" +
" PE.INST_ID=PTH.INST_ID AND\n" +
" PE.EMPLOYEE_ID=PTH.EMPLOYEE_ID\n" +
" INNER JOIN PERSON P ON\n" +
" PE.INST_ID=P.INST_ID AND\n" +
" PE.PERSON_ID=P.PERSON_ID\n" +
" LEFT JOIN HR_EMPLOYEE_DEDUCTIONS_AND_BENEFITS_HISTORY DBH ON\n" +
" PTH.INST_ID=DBH.INST_ID AND\n" +
" PTH.CHECK_DATE=DBH.CHECK_DATE AND\n" +
" PTH.CHECK_NO=DBH.CHECK_NO AND\n" +
" PTH.EMPLOYEE_ID=DBH.EMPLOYEE_ID\n" +
" LEFT JOIN HR_DEDUCTION_AND_BENEFITS DB ON\n" +
" DB.INST_ID=DBH.INST_ID AND\n" +
" DB.HR_DEDUCTION_AND_BENEFITS_CODE=DBH.HR_DEDUCTION_AND_BENEFITS_CODE\n" +
" LEFT JOIN BATCH_QUEUE BQ ON\n" +
" PTH.BATCH_QUEUE_ID=BQ.BATCH_QUEUE_ID\n" +
" LEFT JOIN BATCH B ON\n" +
" B.BATCH_CODE=BQ.BATCH_CODE\n" +
" LEFT JOIN BATCH_PARAMETER BP ON\n" +
" BQ.BATCH_QUEUE_ID=BP.BATCH_QUEUE_ID\n" +
" AND BP.COLUMN_NAME = 'SUPPRESS_DIRECT_DEPOSIT'\n" +
" WHERE PTH.CHECK_DATE >='{0}'\n" +
" AND PTH.CHECK_DATE <='{1}'\n" +
" and BQ.BATCH_CODE='BAT_PY_PAYCALC'\n" +
" and bq.fy=2014\n" +
" ORDER BY PTH.INST_ID\n" +
",PTH.EMPLOYEE_ID\n" +
",DBH.HR_DEDUCTION_AND_BENEFITS_CODE\n" +
",DBH.CHECK_DATE", startDateStr, endDateStr);
SqlDataAdapter adapter = new SqlDataAdapter(SQL, connStr);
DataTable dt = new DataTable();
adapter.Fill(dt);
jdweng
Could you elaborate more on what this code does in general?
Does it generate a table with the data between specified dates? If so, where is the table shown?
Where does one enter in the specified start and end dates on the Web Application? Do I have to create start and end date blanks and link them to the code for it to work?
Sorry for the inconvenience - I'm just really new at this. Thanks!

Visual Studio and BPC 10.0

Hi all,
I'm a relatively new Planning Consultant and on a new project have the requirement of having an input screen for the allocation of time, for an individual, against a project.
Examples of the required input are:
- Allocate Nick Carter, to Project ABC, for 28 November 2011, Full Day (8hours).
- Allocate Joe Bloggs, to Project XYZ, from 28th November to 1st February, Full Days
Has anyone used Visual Studio to create an input screen, and maybe used a drag and drop design that integrates well with BPC.
There is also a requirement for Versions, i.e. Scenario 1, Scenario 2, which allow different planning options.
The BPC input screen, even with the Web UI 10.0 is limited, especially due to the way it presents data as numbers as opposed to text.
Any feedback or advice would be much appreciated!

Hi Sabine, thank you for the replies!
We are using BPC 10.0 for NetWeaver, and not MS.
The reassurance that it is technically possible if good for our Project as we can start to move forwards with the Bluerprinting. We are going to use NetWeaver Gateway to connect Visual Studio to SAP (BW and BPC).
We have done some mock-ups for Excel but have come accross some significnat limitations, some of which are column limits, and how we need the input cell, e.g. 8 (hours), to Project Name.
[The current solution looks like this|http://i44.tinypic.com/1o7hjr.jpg], and the way that we thought BPC Excel could look is like this: [BPC Excel Possible Design|http://www.freeimagehosting.net/newuploads/fef8f.jpg]
I have also found information that there are row and column limitations on excel that will restrict the volume of data we are required to show / input at any one time. (I found information [here|Maximum Number of Columns Exceeded Message; under Sakthi Jaganathan's post)
I'm not sure what you mean by Business Object Connector. From internet research it suggests it's a BOBJ connector for BI4 which we will be using for reporting.
Thanks again for your comments, you don't realise how much it helps us!
Nick

Visual Studio and Winsock vs. Winsock2

Hi Folks,
First off, I'm a Mac guy who is still relatively new to Visual Studio 2003 and 2005. I have a question that I hope is simple for someone with Visual Studio experience to answer...
I am working on a plug-in that uses sockets and I was trying to use Winsock2 instead of Winsock (I used Winsock2 in my stand-alone test application, and figured I would stick with it my plug-in). My problem is that in order to get winsock2.h to successfully load in my plug-in code (without a ton of warnings/errors), it appears that I need to load winsock2.h before windows.h. I'm not sure how to do this in plug-in code, and I am hoping someone could shed some light on this for me.
My use of sockets isn't all that complex, so maybe I'm OK with using plain old winsock. I'm just really curious how one would go about using winsock2.h in a plug-in. Should I use the WS2_32.lib with the winsock2.h header file? That seems like a bad idea, so I'm using wsock32.lib.
Any help will be greatly appreciated!!!
Cheers!
-- Jim

We use Winsock2 too, without problems. What we did was edit the Adobe file VCPlugInHeaders.h to look like this:
#if defined WINDOWS && defined _MSC_VER
// Include Winsock2.h first to stop Windows.h (via ShukHeaders.cp)
// including Winsock.h"
#include "Winsock2.h"
#include "ShukHeaders.cp"
#endif
See if that fixes it for you.
Regards,
Charles

Tagged PDF, Visual Studio and Dynamic PDF

I am a noob with the Indesign but I have hands on experience with the Photoshop and Illustrator.
I am trying to create a tagged pdf form which will be used as a receipt after the web application is complete and the information are entered into that tagged pdf using Dynamic PDF.
I created the form with information like
Name Textbox
Address Textbox and so forth.
Dynamic pdf just prints the data and it doesn't matter if its textbox or not.
So, any suggestions on how to tag the pdf properly so that it read all the information in the form along with the information printed by the dynamic pdf?
I am using cloud indesign cc.

Hi,
Please follow the following steps to tag pdf manually-
1. Choose Window > Utilities > Tags to display the Tags panel.
2. Choose View > Structure > Show Structure to display the Structure pane, to the left of the Document window.
3. Choose Add Untagged Items from the Structure pane menu.
4. Select a page item in the document.
5. Select a tag in the Tags panel.
Note the following suggested uses for certain imported tags:
Artifact : The Artifact tag lets you hide page items, such as page numbers or unimportant objects, when viewing the exported
PDF file in Reflow view, which displays only tagged items; see your Adobe Acrobat documentation. This is especially useful for
viewing PDF files on a handheld device or in other PDF readers.
Cell : Use this tag for table cells.
Figure : Use this tag for placed graphics. The Figure tag is applied to all untagged graphics placed in your document when you
choose Add Untagged Items.
Paragraph tags (P, H, H1–H6) : These tags have no effect on the exported PDF text when viewed in Reflow view. However,
they can be useful in some situations when exporting a PDF file to HTML format.
Story : Use this tag for stories. The Story tag is applied to all untagged text frames when you choose Add Untagged Items. For
example, suppose you have an InDesign document formatted with three paragraph styles: Head1, Head2, and Body. First,
map these paragraph styles to the H1, H2, and P tags, respectively. Next, export to PDF. Finally, when you export the PDF
document to HTML or XML in Acrobat, the paragraphs tagged as H1, H2, and P will display appropriately (such as with large
bold letters in H1) in a web browser.
i hope this will help you, in case not then let me know.

Will Mac OS support Visual studio and MS sqlserver ?

I want to buy a Mac book Air .But i don't know wheather it supports the microsoft dev tools like VS 2012 and MS Sql Server 2012 or not!. And if i go for an Windows OS to install on Mac notebook will it create any performance issue? And what size of flash
drive will i go for to play with these two softwares on Mac Notebooks? Is there any mac version of thease two softwares?

Hello,
The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
As the question is off topic here, I am moving it to the
Where is the Forum... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Visual Studio and Crystal

Similar Messages

Maybe you are looking for