Visual Studios 2008 and Acrobat SDK v9

I am trying to install Acrobat SDK v9. I am getting a prompt to install Visual Studios 2005. Is Visual 2008 supported? If so, what version of SDK?

Read this:
http://forums.adobe.com/message/3280598

Similar Messages

Windows 7 Enterprise with Visual Studio 2008 and 32 bit ODBC access

I have a 32 bit ODBC used to access Progress databases. We have to use the 32 bit driver. My development had been run on XP in the past with no issues. I have moved to a Windows 7 Enterprise workstation currently and cannot access
through my app. The ODBC was installed as 32 bit through the SysWow64\odbcca32.exe with no issues. I have tried to run my app with the x86 option but it still does not see the ODBC. I went in and created a fake ODBC in the 64 bit interface
and the app did see that ODBC so the app is running in 64 bit mode. How can I force this app to run as 32 bit on my machine? Thanks in advance.

Hi,
Hello,
Thank you for your post.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses the usage issue of Visual Studio IDE such as
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
For your issue how to force the app to run as 32bit, if you are working with Windows Forms app. please consult on Windows Forms Forum:http://social.msdn.microsoft.com/Forums/windows/en-US/home?category=windowsforms
If you are working with WPF app, please consult on WPF forum:
http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=wpf
If you are working with ASP.NET Web Application, I suggest that you can consult your issue on ASP.NET forum:
http://forums.asp.net/
for better solution and support.
If the app is a C++ win32 app, please consult on Visual C++ forum:
http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vcgeneral
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Slow first connection using Oracle 10g xe and Visual Studio 2008

{noformat}
Good day,
I'm slightly unaccustomed to using forums, so bear with me.
My initial connection to the Oracle database takes approximately 30 seconds. It seems to be waiting for a connection before timing out and trying another connection which works, as all subsequent connections work immediately. I'm unsure how other people's responses in forums can help me due to the plethora of configurations, so here's mine. My comprehension of the oracle world is still growing, you'll have to explain the terms you're using for me, Hoping you can help.
I'm using Visual Studio 2008, set to use 32 bit debug mode, on a Windows 7 Pro platform. Also using Oracle 10g Xe, and have installed the 32 bit version of ODAC 11.2 (11.2.0.1) to aid making a connection from Visual Studio to Oracle.
I have a database set up and a user with system admin rights. This is all local for a programming project and will never see the light of day outside of my personal machine.
I am using code to connect, not the GUI. I wish to code this project completely without the aid of the GUI. so my connection string within Visual Studio C# is (pw/id hidden)...
string xe = "Data Source=xe;User Id=xxxxx;Password=xxxxx;";
OracleConnection conn = new OracleConnection(xe);
My c:\devsuitehome\network\admin\sqlnet.ora file is this:
# sqlnet.ora Network Configuration File: C:\DevSuiteHome\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (LDAP, TNSNAMES, EZCONNECT, ONAMES, HOSTNAME)
And my c:\devsuitehome\network\admin\TNSNames.ora file is this:
tnsnames.ora Network Configuration File: C:\DevSuiteHome\network\admin\tnsnames.ora
Generated by Oracle configuration tools.
XE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = xe)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = <machine name)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = PLSExtProc)
Just for good measure, my tnsping xe shows:
"Used paramter files:<br/>
c:\devsuitehome\network\admin\sqlnet.ora<br/><br/>
Used TNSNAMES adapter to resolve the alias<br/>
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521)))(CONNECT_DATA = (SERVICE_NAME = xe)))
OK (0 msec)"
So, how can I make that initial connection faster so I don't spend 15 years testing my application due to slow start-ups? :)
Thank you.
Kevin.
{noformat}
Edited by: 832285 on Jan 29, 2011 10:08 AM
Edited by: 832285 on Jan 29, 2011 10:10 AM

I have formatted my hard drive since my first post. I was running window 64 bit with a higher version of the ODAC and that proved to crash my machine with faulty error messages about memory. I have reverted to a previous version of the ODAC tools and everything works very smooth now. Still the connection time is consistently 20 seconds or longer on the first attempt.
Just a little more information.. I am currently taking a college course with 15 other students, as you can tell by the impersonal machine name, where programming using visual studio 2008, and Oracle 10g xe is expected. All of us are using a 64 bit environment and we all have difficulties cutting down the load time of making the first connection to Oracle. Some people are longer making the connection, but none are shorter.
One other note. After the first connection is made, taking 20 or more seconds, and is closed, all subsequent openings of the connection are instantaneous, for all of us.
If there is ANYTHING more I can get for you, please let me know. With my environment stable as it is, I will not need to format or change any information for the foreseeable future.
Here is the information you requested
1 The connection method I am using, I have chosen the manual connection for you, however the delay exists if the connection is made through the GUI as well.
Historically, I am getting slow connection speeds through adding the connection through the GUI or by a manual connection. Here is how I am doing it manually. I have the connection being created in 20 seconds, which is the best I can get.
Imports Oracle.DataAccess.Client
Also included project reference: oracle.dataaccess / version 2.111.6.20
    Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
        Dim connString As String = "Data Source=XE;User Id=abc;Password=abc;"
        Dim con As OracleConnection = New OracleConnection()
        con.ConnectionString = connString
        Try
            con.Open()
            MessageBox.Show("Connected!")
            con.Close()
            con.Dispose()
        Catch ex As Exception
            MessageBox.Show(ex.Message)
        End Try
    End SubMy current TNS Ping results
TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 16-FEB-2011 01:02:36
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
C:\oraclexe\app\oracle\product\10.2.0\server\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = XE)))
OK (0 msec)2 Connection to SQL plus is instantaneous.
I fought for weeks about the ODAC version 11.2.0.1 that you see in the previous post, and that would be a whole new thread. Suffice it to say I have a reliable environment to program in with this 10.2.0.1.0 version that I am running now, and the connection time has not changed, it is still minimum 20 seconds load time, sometimes up to 25.
3 Ram usage in my typical environment
I am running this laptop with 4 gigs of ram. This is a typical environment I would be running my application in.
Physical memory
total 4090
cached 1753
available 2345
free 656
system
handles 27141
threads 911
processes 70
commit megs 2860/8179
kernel memory megs
paged 201
nonpaged 52
4 I formatted my machine and reinstalled the Windows 7 professional operating system as of a few nights ago. The Oracle software on my machine is
Oracle Database 10g express edition
ODAC 11.1.0
I amm not sure what filename you would need in addition to the product names that I have installed.
5 The information from the SET command is
ALLUSERSPROFILE=C:\ProgramData
APPDATA=C:\Users\stepheke\AppData\Roaming
CommonProgramFiles=C:\Program Files\Common Files
CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files
CommonProgramW6432=C:\Program Files\Common Files
COMPUTERNAME=STEKEV0908
ComSpec=C:\Windows\system32\cmd.exe
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Users\stepheke
LOCALAPPDATA=C:\Users\stepheke\AppData\Local
LOGONSERVER=\\STEKEV0908
NUMBER_OF_PROCESSORS=2
oracle_sid=xe
OS=Windows_NT
Path=C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files (x86)\Common Files\Microsoft Shared\Windows Live;C:\Oracleapp\stepheke\product\11.1.0\client_1;C:\Oracleapp\stepheke\product\11.1.0\client_1\bin;C:\oraclexe\app\oracle\product\10.2.0\server\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;c:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Windows Live\Shared
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
PROCESSOR_ARCHITECTURE=AMD64
PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 23 Stepping 10, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=170a
ProgramData=C:\ProgramData
ProgramFiles=C:\Program Files
ProgramFiles(x86)=C:\Program Files (x86)
ProgramW6432=C:\Program Files
PROMPT=$P$G
PSModulePath=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\
PUBLIC=C:\Users\Public
SystemDrive=C:
SystemRoot=C:\Windows
TEMP=C:\Users\stepheke\AppData\Local\Temp
TMP=C:\Users\stepheke\AppData\Local\Temp
USERDOMAIN=stekev0908
USERNAME=stepheke
USERPROFILE=C:\Users\stepheke
VS90COMNTOOLS=c:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\Tools\
windir=C:\Windows

Crystal Reports 10 and Visual Studio 2008

Hi All
I've got an application that I recieved from my cleint. This is running Visual Studio 2008 and Crystal Reports 10 backend being Oracle 10.2
However, when I try to run the applincation and open any report it pops up an error "crdb_oracle.dll" not found.
I have searched this on the internet and found that there were many suggestions there. I've tried all the suggestions like reinstalling the Oracle client, Re Installing Crystal etc.,
But the error remained as is.
When i try to do a regsvr32 on this dll it fails. Am really not sure why this is happening
Any help from any one out there is highly appreciated.
Pavan
UPDATE:
I've verified the versions though. They are workign fine at the customer place.
Here is what they have done.They have got Oracle, VS 2008 and Crystal Reports 10. They got the reports embedded into .NET environment and are able to view the reports.
But when we try to execute the same code, it pops up the error, "Crdb_oracle.dll" could not be loaded.
Wanted some support on this.
Additionally, could you suggest on what needs to be done? Do we need to upgrade crystsal to crystal 2008? Will this work without any errors on the execution side (I'm sure that the customer of mine will not be happy or willing to upgrade but atleast if I get a confiramtion from you I can atleast quote this to the customer) and without any extra redesiging of the reports or any other work on the reports
Pavan Kumar
Edited by: pavan kumar on Jul 30, 2008 4:01 PM

Hi, Pavan;
Likely the problem is that the report was created with a different version of Crystal Reports than the one that ships with VS.NET 2008 (Which is Crystal Reports Basic for VS.NET 2008 - version 10.5). If the report was created with a full version of Crystal Reports, then it would have access to our native Oracle driver, the dll that is giving you the issue.
The full version of Crystal Reports would install that dll, but the .NET version would not. In order to distribute that DLL, yes, the client would need to develop with the full version of Crystal Reports, in this case Crystal Reports 2008.
Regards,
Jonathan

.ard file not created - visual studio 2008

Hi, I'm creating addon installer for SAP B1 2007 SP1 PL05 running on Windows Server 2008 virtual machine. Visual Studio 2008 and B1DE 2.0 are installed on a Windows 7 virtual machine.
I followed the steps to create new project using SAP B1 AddOnInstaller .NET Wizard. The AddOnRegDataGen.bat ran automatically when the wizard finished, and I also manually ran the .bat file, but in the bin folder only these 4 files were created:
Installer.exe, Installer.vshost.exe, Installer.vshost.exe.manifest, Installer.xml
The .exe file is not using the name I gave to the Installation project, and .ard file is missing.
In AddonRegDataGen.bat the version is "20090901" - it only contains numbers, so this could not be the problem.
Please help!

Hi Yi,
Could you take a look at AddonRegDataGen.bat under AddOnRegDataGenFile folder?
Can you find AddOnRegDataGen.exe path as indicated in the 1st line of AddonRegDataGen.bat?
Typically it is under:
"C:\Program Files\SAP\SAP Business One SDK\Tools\AddOnRegDataGen\AddOnRegDataGen.exe"
Please be sure SDK component installed and correct the batch file with the right path of AddOnRegDataGen.exe.
Then run the batch manually. Or you can create ARD with AddOnRegDataGen.exe directly.
Kind Regards, Yatsea

Visual Studio 2008 Crystal Report 10.5 merge modules download

Hi All,
I'm struggling with this problem about 2 weeks and still cannot find the resolution.
I was developed a .Net application with visual studio 2008 and using crystal report to generate report.
It is working fine in my local machine. However, after I deployed the application to web server with microsoft server 2003 64bits server. The report cannot open and I get this error The type initialize for 'crystaldecisions.crystalreports.engine.reportdocument' threw an exception.
I try to install the redistribution package from C:\Program Files\Microsoft SDKs\Windows\v6.0A\Bootstrapper\Packages\CrystalReports10_5 but it doesn't work.
Please kindly to help me thank you very much

Thank you Sir,
After I installed the msi I get this error retrieve from event log.
An unhandled exception occurred and the process was terminated.
Application ID: DefaultDomain
Process ID: 528
Exception: System.Runtime.Serialization.SerializationException
Message: Type 'CrystalDecisions.CrystalReports.Engine.LoadSaveReportException' in Assembly 'CrystalDecisions.Shared, Version=10.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' is not marked as serializable.
StackTrace:    at System.Runtime.Serialization.Formatters.Binary.WriteObjectInfo.InitSerialize(Object obj, ISurrogateSelector surrogateSelector, StreamingContext context, SerObjectInfoInit serObjectInfoInit, IFormatterConverter converter, ObjectWriter objectWriter)
   at System.Runtime.Serialization.Formatters.Binary.WriteObjectInfo.Serialize(Object obj, ISurrogateSelector surrogateSelector, StreamingContext context, SerObjectInfoInit serObjectInfoInit, IFormatterConverter converter, ObjectWriter objectWriter)
   at System.Runtime.Serialization.Formatters.Binary.ObjectWriter.Write(WriteObjectInfo objectInfo, NameInfo memberNameInfo, NameInfo typeNameInfo)
   at System.Runtime.Serialization.Formatters.Binary.ObjectWriter.Serialize(Object graph, Header[] inHeaders, __BinaryWriter serWriter, Boolean fCheck)
   at System.Runtime.Serialization.Formatters.Binary.BinaryFormatter.Serialize(Stream serializationStream, Object graph, Header[] headers, Boolean fCheck)
   at System.Runtime.Remoting.Channels.CrossAppDomainSerializer.SerializeObject(Object obj, MemoryStream stm)
   at System.AppDomain.Serialize(Object o)
   at System.AppDomain.MarshalObject(Object o)
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

Using Data Services WSDL with Visual Studio 2008

I am attempting to use the Data Services XI 3.1 WSDL (I think this Data Integrator v 12.1) in Visual Studio 2008 and I am having some difficulty.
I am getting the wsdl from the following location: http://devserver:28080/DataServices/servlet/webservices?ver2.0&wsdlxml
When I attempt to add the web reference to a project all look fine, I see a display of all the methods and their parameter description, etc. but when the add is complete it appears to be unusable. Attempting to instanciate the web service and call the methods results in unreconizable data types. The web service does not show up in Intellisense as a reconizable class, etc.
Am I doing something wrong?
Any help would be appreciated.
Thanks.

try adding a "Service Reference..."
In the add Service Reference panel, click Advanced and then select Add Web Reference. Enter the url to the WSDL and see if this works.
If this continues to fail, try replacing 2.0 with 1.1 on your URL
ie: /webservices?ver1.1&wsdlxml
if that still fails, past the URL in a browser and see if there are any error messages in the <documentation> tags.
if you are still having issues, try posting to:
Expert Forums --> Business Objects --> Enterprise Information Management
Dan

New to Visual Studio 2008, not new to CR - but have question

Hi,
I started a position to build reports for a small company. They use VS 2008 and Crystal 2008 (basic). I am not new to Crystal Reports, been using it since version 4.0. But I am new to integrating it into Visual Studio or using it to deploy reports via a web application.
I was able to create a dataset, connect Crystal to the Dataset in Visual Studio and design a report.
There are two tabs on the bottom of the Crystal Window - one is to the design side and one is to preview the main page of the report.
So here in lies the problem - when I go to view the results - there are none. It is random or dummy data being presented in Visual Studio 2008.
I have scoured MSDN and SAP forums looking for help in this. I see other posts that elude to the same issue, but --there has to be some way to see the data in Visual Studio.
Can someone explain to me why I don't see the real data from the dataset? And more importantly where is the tutorials for Visual Studio 2008 and Crystal Reports 2008?
Thanks so much for your help!

Hi,
I have also seen the same, that is report displays dummy data at my end however when you run the report from application you get the data that is when you pass the dataset to the report at runtime and not while previewing the report. I believe this is because when we use datasets to design a report we consider the schema of the report mainly not data.
If you mean that you do not get any data in the report then I would suggest you to use the below mentioned code to generate an xsd file, after filling up the dataset so that the report schema and the dataset schema matches.
datasetObject.WriteXml("c:\\temp\\myData1.xml",XmlWriteMode.WriteSchema);
Regards,
AG.

Error Ora-604 on connect from Visual Studio 2008 to Oracle database

Hello!
I have installed Oracle 9.2.0.6 Database, Microsoft Visual Studio 2008 and today I succesfully installed ODP.NET 1110621.
I wrote a simple console application like this:
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using Oracle.DataAccess.Client;
using Oracle.DataAccess.Types;
using System.Data;
namespace ConsoleApplication1
class Program
static void Main(string[] args)
OracleConnection c = new OracleConnection();
c.ConnectionString = "Data Source=(DESCRIPTION="
+ "(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.1.1)(PORT=1521)))"
+ "(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=ssss)));"
+ "User Id=user;Password=pwd;";
c.Open();
OracleCommand cmd = new OracleCommand();
cmd.CommandText = "Select * from CATEGORY_TABLE";
cmd.CommandType = CommandType.Text;
cmd.Connection = c;
OracleDataReader dr = cmd.ExecuteReader();
while (dr.Read())
Console.WriteLine(dr[0].ToString() + " " + dr[1].ToString());
dr.Dispose();
cmd.Dispose();
c.Dispose();
Console.ReadLine();
at line c.Open(); appear runtime error : ORA-604 Error occurred at recursive SQL level 1
How to solve it?

Your issue is not SQL and PL/SQL so much as .NET so I would suggest you ask the question in the "Windows and .NET" forum.
But a couple of thoughts:
1. Your database is undoubtedly not at "HOST=192.168.1.1"
This IP address is generally the address of the router not the server.
2. Why would you install an unpatched version of software so old it is in desupport mode and then try to work with it using a current
version of a Microsoft product? Would you be comfortable installing a 10 year old version of a Microsoft product and expect it to
work well with Oracle 11gR1?

InDesign CS4 type library Com reference is missing in visual studio 2008 in windows 7

hi
i am trying to create InDesign CS4 COM object using vb.net as
indApp=CeateObject("InDesign.Application.CS4")
i checked in the visual studio 2008 ,and tried to add indesign reference but the reference is not available in the VS references Com section
i tried it by adding the Indesign CS4 DLL by from local drive but still it is not working
i have two systems one having OS windows XP and another is having Windows 7
the problem is in the system having windows XP my program is running fine but same program is giving an exception in the windows 7
i m getting the exception message as:
Unable to cast COM object of type 'System.__ComObject' to interface type 'InDesign.Application'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{ABD4CBB2-0CFE-11D1-801D-0060B03C02E4}' failed due to the following error: No such interface supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)).
please help me

Hi,
Did anyone solve this issue?
A few years ago, I've wrote a small app that uses Indesign on XP. All these years it worked great. Now, we have migrated to windows 7 and the problems start. I've tried running both Indesign as my own app as administrator without any improvement.
Why are these problems happening in Windows 7?
Kind regards
John

Barcode error when using Visual Studio 2008

Hello, I'm opening a crystal report in visual studio 2008 and keep getting UFL 'u25azalea.dll that implements this function is missing
Error in formula display_string
'BarcodeC39( ToText(currentFieldValue) )
'u25azalea.dll that implements this function is missing
Any ideas would be really appreciated.
Thanks

The u25 dll is included with all versions of full Crystal Reports. It is not included with the version that comes with Visual Studio .NET.
I believe if you go to Azalea web site and download the True Type Barcode39 font you will get it on install. Not sure if it will work with VS .NET though but should.
Installing any version of Crystal on your development PC should also make it work.
Thank you
Don

Installa error for visual studio 2005 and Visual C++ 2005 on windows server 2003 SP@

Not able to install visual studio 2005 I am getting error “The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch” and for visual C++ 2005 after clicking the setup file nothing is displayed on the desktop. please guide. All the above software I am installing on windows server 2003 service pack2
Dear Gurus Please help me

You might want to try : MS Visual Studio 2008 and Visual C++ 2008 Express instead as this version is supported as well.
See:
For R12: Note 1070674.1 - MS Visual Studio 2008 and Visual C++ 2008 Express for Oracle E-Business Suite Release 12 on Windows
For 11i : Note 1095124.1 - Microsoft Visual Studio 2008 and Visual C++ 2008 Express for Oracle E-Business Suite Release 11i on Windows
Regards,
Ronald

XI, Service Packs and Visual Studio 2008

Hi
Sorry if these questions have already been answered but I have tried to search and get the answers myself with lots of link following and frustration.
We are developing a Windows forms application using Visual Studio 2008.
We need a good solid report tool for both designing and viewing reports based on SQL data.
Due to past exposure to Crystal, we have decided to use a Developer Edition of Crystal Reports XI we have had for a long time (think it was a promotional offering when XI was first released).
The Help-About version is 11.0.0.1282
I have a couple of questions:
1. What service packs can I apply to this build ? Looking on the download section of this web site, there are no updates available for XI (there are plenty for XI R1 and XI R2). Can I apply the R1/R2 updates to this build, if not can I upgrade to any of these builds ?
2. I have noticed that even when installed after VS2008, the Crystal Version of the Viewer is still 10.5.0.0
I can created reports in XI and use them with this viewer but can I get a XI build of the viewer and other .NET objects. If not what are the options (apart from upgrading to 2008, this is price restrictive).
If there are already answers or knowledge-base articles containing the answers to these questions please just post the links, if not then some help would be appreciated as this whole thing is really confusing and I really don't want to go back to trying to use the Microsoft Reports package shipping with VS2008.
Many thanks
Mark Harby
Nottingham. UK

HI,
First of all:
If you are planning to use VS2008 then you need to use CR 2008 SP0 or above to make it compatible.
1. What service packs can I apply to this build ? Looking on the download section of this web site, there are no updates available for XI (there are plenty for XI R1 and XI R2). Can I apply the R1/R2 updates to this build, if not can I upgrade to any of these builds ?
Officially CRXI has reached the end of life cycle.
Upgrade from CRXI R1 to R2 is free. You need to download the CRXIR2 sp2 setup and install the complete product alogn with SP2 using the CRXIR1 keycode.
2. I have noticed that even when installed after VS2008, the Crystal Version of the Viewer is still 10.5.0.0
I can created reports in XI and use them with this viewer but can I get a XI build of the viewer and other .NET objects. If not what are the options (apart from upgrading to 2008, this is price restrictive).
As stated you need to either use CR that comes with VS2008 or use CR2008 with SP0 or above. That is why you are unable to see the upgraded viewer. The other options would be to use VS2003 with CRXI and above or use VS2005 and CRXIR2 sp2 and above.
Some links:
[Compatibility chart.|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313335333833323336%7D.do]
[Platform guide for all products.|Articles]
Hope I have covered them all!
Regards,
AG.

ODAC with Oracle 10g and Visual Studio 2008

Hello-
Is the an ODAC version supporting Oracle 10g with tools for Visual Studio 2008? I've installed the ODAC 11.2 version for VS 2008, however the Oracle data source connection does not display for the Data Entity Model, only the usual SQL Server connections.
Thank you in advance!

Hello again-
First off, thank you for prompt reply. After poring over some of the postings, I'm gaining an understanding of when ODAC and the Entity Designer marriage came together and your answer solidified it.
My situation is I've developed an ODATA service with VS2010, Oracle 11g and ODTwithODAC112030 and everything works fine. I then deploy the service to the company's Windows 2003 server using Oracle 10g. I've also went ahead an installed the ODTwithODAC112030 on the server and copied the tnsnames.ora file into the oracle client's directory associated with the ODAC installation. When I query the Oracle database's metadata in IE, e.g. http://localhost:8050/DataMgmt/$metadata, a listing is displayed as expected; however, when I query a particlar database table listed in the metadata, an error is returned that the request could not be processed. Any ideas?
Thank you.

Crash call stack caused by crdb_adoplus.dll and crqe.dll on Crystal Report for Visual Studio 2008

Hi There,
i have an application running on C# .NET which use .NET Framework 3.5 SP1 and Crystal Report for Visual Studio 2008 x64. Now i'm facing the issue in application. suddenly my IIS crash , and the application is logout.
i have opened advisory case to Microsoft and they help me to analyze the dump from the application when the issue is happened.
here it is the stack trace :
STACK_TEXT:
00000000`9b1dd160 000007fe`eb93946d : 00000000`9b1dd308 000007fe`eb931948 00000000`00000000 000007fe`eb931610 : verifier!VerifierStopMessage+0x1f0
00000000`9b1dd210 000007fe`eb939736 : 00000000`9b1ddb50 00000000`00000002 00000000`00000040 00000000`00000004 : verifier!AVrfpDphReportCorruptedBlock+0x2a5
00000000`9b1dd2d0 000007fe`eb9399cd : 00000000`b32f1000 00000000`9b1ddb50 00000000`00000004 00000000`00001000 : verifier!AVrfpDphCheckNormalHeapBlock+0xce
00000000`9b1dd340 000007fe`eb93873a : 00000000`9b1ddb50 00000000`01001002 00000000`cca0c3b0 00000000`00000000 : verifier!AVrfpDphNormalHeapFree+0x29
00000000`9b1dd370 00000000`770b99a5 : 00000000`00000000 00000000`00000000 000007fe`f25514f7 000007ff`05f0a1d1 : verifier!AVrfDebugPageHeapFree+0xb6
00000000`9b1dd3d0 00000000`7705dbc0 : 00000000`b32f0000 00000000`cc16afb0 00000000`b32f0000 00000000`cc16afb0 : ntdll!RtlDebugFreeHeap+0x35
00000000`9b1dd430 00000000`7704413d : 00000000`b32f0000 00000000`9968aa01 00000000`00000000 00000000`9b1ddb50 : ntdll!RtlpFreeHeap+0x19a70
00000000`9b1dd770 00000000`76ef307a : 00000000`00000001 00000000`9968aa40 00000000`9b1dd958 00000000`cc16afb0 : ntdll!RtlFreeHeap+0x1a6
00000000`9b1dd7f0 00000000`9739cabc : 00000000`00000000 00000000`9968aa40 00000000`000002a3 00000000`cc13ef28 : kernel32!HeapFree+0xa
00000000`9b1dd820 000007fe`f2550e37 : 00000000`00000000 00000000`24b20fc0 00000000`0000001b 000007ff`0604a340 : msvcr90!free+0x1c
00000000`9b1dd850 000007ff`05f05802 : 00000000`00000000 000007ff`0604f7c0 00000000`9b1dd958 00000000`9968aa40 : mscorwks!DoNDirectCall__PatchGetThreadCall+0x7b
00000000`9b1dd8f0 000007ff`05f0a231 : 000007ff`0604f730 000007ff`05f05802 00000000`cc16afb0 00000000`0000001b : DomainBoundILStubClass.IL_STUB(Void*)+0x42
00000000`9b1dd9b0 000007ff`05f0a1d1 : 00000000`cc16afb0 00000000`000007d4 00000000`9b1dd2e8 00000000`00000000 : crdb_adoplus!<Module>.DbFieldInfo.{dtor}(DbFieldInfo*)+0x11
00000000`9b1dd9e0 000007ff`05f0a177 : 00000000`0000001c 00000000`cc13ef20 00000000`00000000 00000000`00000000 : crdb_adoplus!<Module>.DbFreeFieldList(UInt32, DbFieldInfo**)+0x31
00000000`9b1dda30 000007fe`f254f18a : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : DomainBoundILStubClass.IL_STUB(Int32, Int64)+0x7
00000000`9b1dda60 00000000`9a506b36 : 00000000`0000001c 00000000`cc13ef20 00000000`00000000 00000000`00000000 : mscorwks!UMThunkStubAMD64+0x7a
00000000`9b1ddaf0 00000000`9a583538 : 00000000`bf35af90 00000000`bf9bcfa0 00000000`9b1ddd30 00000000`00000000 : crqe+0x16b36
00000000`9b1ddca0 00000000`9a6c1c64 : 00000000`bec28dc0 00000000`cd926e60 00000000`00000000 00000000`cbafcf20 : crqe+0x93538
00000000`9b1ddf90 00000000`9a6bc697 : 00000000`cd926e60 00000000`00000000 00000000`00000000 00000000`00000000 : crqe+0x1d1c64
00000000`9b1de000 00000000`b64fcab9 : 00000000`cd926ec0 00000000`9b1de0c0 00000000`00000000 00000000`b6dee2cb : crqe+0x1cc697
The crdb_adoplus tried free a corrupted Heap Block:
0:188> dt DPH_BLOCK_INFORMATION 000000009b1ddb50-40
verifier!DPH_BLOCK_INFORMATION
   +0x000 StartStamp : 0
   +0x004 PaddingStart     : 0
   +0x008 Heap             : 0x00000000`9b1ddb58 Void
   +0x010 RequestedSize    : 0x9b1ddb50
   +0x018 ActualSize       : 0x9b1ddb30
   +0x020 Internal         : _DPH_BLOCK_INTERNAL_INFORMATION
   +0x030 StackTrace       : 0x00000000`00000001 Void
   +0x038 PaddingEnd       : 0
   +0x03c EndStamp         : 0
is this problem solved by upgrading Crystal Report version to CR12 ?
Thank you,
Best Regards,
Leonardus Tono Amboro
IT Enterprise System Architect
PT Astra International Tbk.
AMDI A Building, 7th Fl.
Jln. Gaya Motor Raya 8. Sunter II, Jakarta 14330, Indonesia
Message was edited by: Ludek Uher
Phone number removed - Please see the SCN Rules of Engagement

Hi Leonardus
Please define "crash". What actually happens?
Did this ever work? E.g.; this started to happen recently?
Is this happening on your development system or QA or production?
See if enabling the option "Verify on 1st Refresh" will help.
Make sure you are using SP 1: Crystal Reports for VS 2005 and VS 2008 Updates & Runtime Downloads
Ensure that the dataset is less that a couple thousand rows. Anything more than that will cause issues...
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow me on Twitter

Visual Studios 2008 and Acrobat SDK v9

Similar Messages

Maybe you are looking for