"Visual" Tables and Constraints are missing!!!

Hi all,
i drew my database diagram and deployed to the database. But the creation file accuse a few tables that were created and deleted in the drawing process. I mean, they are not in the diagram, but JDeveloper is seeing them somehow.
After deploying to the database, i imported these tables to a java classes diagram so jdev would create my beans automatically. What happens is that automatically a few constraints are gone now. If i go into the table properties, the constraints are there, but i cannot see them in the diagram.
How can i view all these missing objects?
Thanks to all.
Eduardo

Ok... the constraints i managed a way to make them be visible again. I edited each constraint and they appeared again. But the constraints i had a way to find them. That's no the case with the tables...
Still working on that.
thanks a lot

Similar Messages

  • When I attempt to log on to I tunes I get the following message  "The registry settings used by the I tunes drivers for importing and burning CDs and DVDs are missing  This can happen as a result of installing other CD burning software  Please reinstall

    When I attempt to log on to I tunes I get the following message:
    "The registry settings used by the I Tunes drivers for importing and burning CDs and DVDs are missing.
      This can happen as a result of installing other CD burning software. Please re-install I Tunes."
    To my knowledge no new software has been installed.  I have tried un-installing and re-installing I Tunes but I still
    get the same message.
    Can anyone offer any suggestions?  Do I need to download a new driver?
    Bill Martin

    I can get down as far as step 11 but it shows nothing about upper filters and when I type on "If the Upper Filters entry is missing follow these instructions" nothing happens
    Do you mean you can't see the instructions on what to do if there is no UpperFilters entry?
    If so, here's the relevant instructions for that step:
    On the right side of the Registry Editor window, right-click the UpperFilters entry and choose Modify from the shortcut menu.
    Right-click the empty white space within the right-hand portion of the Registry Editor window. From the shortcut menu, choose New > Multi-String Value.
    Name this new value "UpperFilters" (without the quotes). Then, right-click the newly created UpperFilters entry and choose Modify from the shortcut menu.

  • Tables and structures are used in a standard scripts

    how to find which tables and structures are used in a standard scripts?
    pls explain step by step process...
    Edited by: abap on Jun 21, 2008 4:36 PM

    Go to Transaction SE80, Select Program and paste that program name below..
    Then drop down the tree of that program...then you will find option " Dict. Structures"..
    Here you can find the tables which has been you for that transaction / program.
    Regards,
    Santosh

  • When starting iTunes I continually get an error message " The registry Settings used by the iTunes drivers for importing and burning CDs and DVDs are missing.  This can happen as a result of installing other CD burning software. Please reinstall iTunes."

    When starting iTunes I continually get an error message " The registry Settings used by the iTunes drivers for importing and burning CDs and DVDs are missing.  This can happen as a result of installing other CD burning software. Please reinstall iTunes."  I have unistalled and reinstalled iTunes several times and have cleaned up the registry using a 3rd party Windows utility.  Any tips on removing this error message for good?

    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    iTunes for Windows: "Registry settings" warning when opening iTunes

  • Header and footer are missing

    hello
    header and footer are missing when printing, it has been there before but suddenly they are missing. I have windows 7 and printer is Canon MG6100 series.

    Hi,
    Please see [http://kb.mozillazine.org/Problems_printing_web_pages this] for resetting printer preferences. You can also try to adjust the '''Margins & Header/Footer''' in '''File''' ('''Alt''' + '''F''') > '''Page Setup'''.

  • When opening iTunes, I get the following error message: the registry setting used by the iTunes drivers for importing an burning CDs and DVDs are missing.  This can happen as a result of installing other CD burning software.  Please reinstall iTunes.

    When opening iTunes, I get the following error message: "The registry setting used by the iTunes drivers for importing an burning CDs and DVDs are missing.  This can happen as a result of installing other CD burning software.  Please reinstall iTunes."
    I have reinstalled iTunes twice and still get the message.
    Any clues??
    Thank you.

    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    iTunes for Windows: "Registry settings" warning when opening iTunes

  • When i click on itunes to open, message says: the registry settings used by the itune drivers for importing and burning cds and dvds are missing. this can result from installing other cd burning software. Reinstall itunes.  I'm inexperienced. Please help

    When I click on itunes, I get a message that says, "the registry settings used by the itune drivers for importing and burning cds and dvds are missing.  this can result from installing other cd burning software.  Reinstall itunes."  I am a really inexperienced computer user. My computer is a windows 7.  Would someone please walk me through this or tell me where to find information on how to do this. Thanking in advance, Laurie

    Check out this Apple article -> iTunes for Windows: "Registry settings" warning when opening iTunes
    The article will walk you through reinstalling iTunes and then checking for or creating device filters. Did it help? Did you run into any problems?

  • Can anyone help? I just opened my PDF and letters are missing in each word and sentence. I am using the trial version of Acrobat Pro XI

    Can anyone help? I just opened my PDF and letters are missing in each word and sentence. I am using the trial version of Acrobat Pro XI

    Hi gretchenm66156293,
    Are you running into this issue with one PDF in particular, or with any PDF that you open? Did the PDF display correctly previously? How was that PDF created?
    For starters, please choose File > Properties and click the Fonts tab. What fonts are used in the PDF? Are they "embedded" or "subsetted."
    I would be happy to take a look at the PDF here, if you'd like. Let me know!
    Best,
    Sara

  • "File" and "View" are missing from the ribbon in Excel, MS Office 2011, please help!

    "File" and "View" are missing from the ribbon in Excel, I'm running MS Office 2010.  Please help!

    Post your question on the MS Mac forums as it's their software you're having issues with:  http://answers.microsoft.com/en-us/mac?auth=1

  • My catalogues and tags are missing from my Organizer in Photoshop Elements 10? What is going on?

    My catalogues and tags are missing from my Organizer in Elements 10. What is going on?

    Thank you for the advice. I have a PC and the catalogs were for the most part where you said they would be, on the C drive under Program Data\Adobe\Elements Organizer\Catalogs. The last six months folder as well as a cruise I took in 2012 is missing but the rest seems to be there. Now I seem to have two Organizers-the one I just found and the one I created with my March 2013 trip pictures. How do I put them together and find them when I click on the Photoshop elements Organizer icon? You mentioned “pointing “ PSE to it in the default mode? How do I do that?
    TS

  • The type of the database table and work area (or internal table)...

    Hello
    I am trying to use a database and select all records from it and store them into an internal table.
    My code:
    Select * from xixi_dbcurrency into table gt_currency.
    The error:
    "The type of the database table and work area (or internal table) "GT_CURRENCY" are not Unicode-convertible . . . . . . . . . .     "
    Any suggestions?
    Thank you

    Hi Thomas,
    Thank you for your inputs above.
    But as you suggested is we use INTO CORRESPONDING FIELDS OF TABLE then it resolve the error.
    But I have below piece of code:
    DATA:    it_new_source TYPE STANDARD TABLE OF _ty_s_sc_1,
                  wa_source TYPE _ty_s_sc_1,
                  wa_new_source TYPE _ty_s_sc_1,
                  ls_target_key TYPE t_target_key.
    SELECT * INTO CORRESPONDING FIELDS OF TABLE it_new_source
           FROM /bic/afao06pa100
           FOR ALL ENTRIES IN SOURCE_PACKAGE
           where /bic/fcckjobno = SOURCE_PACKAGE-/bic/fcckjobno
           and /bic/fcckjitid = SOURCE_PACKAGE-/bic/fcckjitid.
    But since this is reading into corresponding fields of table the data load from one DSO to other DOS is running for long more that 15 hours and still not getting completed and giving dump.
    So if I switch the search to below:
    SELECT * FROM /bic/afao06pa100
       INTO TABLE it_new_source
           FOR ALL ENTRIES IN SOURCE_PACKAGE
           where /bic/fcckjobno = SOURCE_PACKAGE-/bic/fcckjobno
           and /bic/fcckjitid = SOURCE_PACKAGE-/bic/fcckjitid.
    Then I am getting below error:E:The type of the database table and work area (or internal table) "IT_NEW_SOURCE" are not Unicode convertible.
    Can you please advice on this, as performance need to improve in start routine code.
    Thank You.

  • The type of the database table and work area are not Unicode convertible

    ***Data declaration
    TYPES : BEGIN OF t_zle_lagerplanung,
                       SEl, "stores which row user has selected
                       kdauf TYPE zle_lagerplanung-kdauf,
                       kdpos TYPE zle_lagerplanung-kdpos,
                       etenr TYPE zle_lagerplanung-etenr,
                       papiermaschine TYPE zle_lagerplanung-papiermaschine,
                       runnr TYPE zle_lagerplanung-runnr,
                       prio TYPE zle_lagerplanung-prio,
                       werk TYPE zle_lagerplanung-werk,
                       durchmesser TYPE zle_lagerplanung-durchmesser,
                       breite TYPE zle_lagerplanung-breite,
                       anzle TYPE zle_lagerplanung-anzle,
                       lgpla TYPE zle_lagerplanung-lgpla,
                       lgtyp TYPE zle_lagerplanung-lgtyp,
                       art TYPE zle_lagerplanung-art,
                       anzhoehe TYPE zle_lagerplanung-anzle,
                       fa TYPE zle_lagerplanung-fa,
    END OF t_zle_lagerplanung.
    DATA : it_zle_lagerplanung TYPE STANDARD TABLE OF t_zle_lagerplanung INITIAL SIZE 0,
                wa_zle_lagerplanung TYPE t_zle_lagerplanung.
    Here I am getting the data in internal table by using thiis select statement.
    SELECT kdauf kdpos etenr papiermaschine runnr prio werk durchmesser breite
                  anzle lgpla lgtyp art anzhoehe fa
    FROM    zle_lagerplanung INTO CORRESPONDING FIELDS OF TABLE it_zle_lagerplanung
    WHERE  kdauf IN s_kdauf
    AND       KDPOS IN s_kdpos
    AND      werk = p_werks.
    But while updating the particular field in zle_lagerplanung using this statement
    UPDATE zle_lagerplanung from table it_zle_lagerplanung.
    it is giving syntax error
    "The type of the database table and work area (or internal table)
    "IT_ZLE_LAGERPLANUNG" are not Unicode convertible. "
    Could any one help me out how to resolve this problem....
    Thanks in advance

    Dear Shayamal,
    XXX....are not Unicode convertible
    This  error comes while inserting or updating database and the fields are not matching between  data base table and structure .
    Check you fields of data base table and  "zle_lagerplanung" and struture "it_zle_lagerplanung" . There fields must match.
    thanks and regrds,
    Anup Banerjee

  • I just installed the latest version of iTunes, but when I went to open iTunes I got a message saying registry settings used to for importing and burning CDs and DVDs are missing and I should reinstall iTunes.  Really?

    I just installed the latest version of iTunes, but when I went to open iTunes I got a message saying registry settings used to for importing and burning CDs and DVDs are missing and I should reinstall iTunes.  Really?

    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    iTunes for Windows: "Registry settings" warning when opening iTunes

  • When I copy and paste a chapter from MS Word into Pages my tables and equations are trashed.  But importing them results in no control over my template How do I get my chapter into my template without copying

    When I copy and paste a chapter from MS Word into Pages my tables and equations are trashed.  But importing them results in no control over my template How do I get my chapter into my template without copying?

    Try just Opening the Word .doc from within Pages and see if that gets closer to what you want, then copy the chapter you want from the Pages version.
    Peter

  • Internal table and work area

    Hi,
           can anybody explain the concepts of Internal table and work area.Thanks in advance.

    hai,
    This may help u.
    WORKAREA is a structure that can hold only one record at a time. It is a collection of fields. We use workarea as we cannot directly read from a table. In order to interact with a table we need workarea. When a Select Statement is executed on a table then the first record is read and put into the header of the table and from there put into the header or the workarea(of the same structure as that of the table)of the internal table and then transferred top the body of the internal table or directly displayed from the workarea.
    Each row in a table is a record and each column is a field.
    While adding or retrieving records to / from internal table we have to keep the record temporarily.
    The area where this record is kept is called as work area for the internal table. The area must have the same structure as that of internal table. An internal table consists of a body and an optional header line.
    Header line is a implicit work area for the internal table. It depends on how the internal table is declared that the itab will have the header line or not.
    e.g.
    data: begin of itab occurs 10,
    ab type c,
    cd type i,
    end of itab. " this table will have the header line.
    data: wa_itab like itab. " explicit work area for itab
    data: itab1 like itab occurs 10. " table is without header line.
    Internal tables are used for storing records which are obtained as a result when we use select statement on database. internal tables are run time entities and doesn't occupy any memory. they are dynamic.
    internal tables are of types.
    1. internal tables with header line. [header and body]
    2. internal tables with out header line. [only body]
    Workarea is the concept which is mainly useful when working with internal tables with out header line.
    at any point of time we can access only one record through header of a internal table. every thing should be done [inserting,modifying, reading ] through header only.
    ex: data: itab like standard table of mara with header line.
    for internal tables with out header line we will create a work area [explicit header] as type of table for storing data into internal table.
    ex: data: itab like mara,
    wa like mara.
    more about internal table types:
    Standard table:
    The key access to a standard table uses a sequential search. The time required for an access is linearly dependent on the number of entries in the internal table.
    You should usually access a standard table with index operations.
    Sorted table:
    The table is always stored internally sorted by its key. Key access to a sorted table can therefore use a binary search. If the key is not unique, the entry with the lowest index is accessed. The time required for an access is logarithmically dependent on the number of entries in the internal table.
    Index accesses to sorted tables are also allowed. You should usually access a sorted table using its key.
    Hash table:
    The table is internally managed with a hash procedure. All the entries must have a unique key. The time required for a key access is constant, that is it does not depend on the number of entries in the internal table.
    You cannot access a hash table with an index. Accesses must use generic key operations (SORT, LOOP, etc.).
    Hashed tables
    This is the most appropriate type for any table where the main operation is key access. You cannot access a hashed table using its index.
    The response time for key access remains constant, regardless of the number of table entries. Like database tables, hashed tables always
    have a unique key. Hashed tables are useful if you want to construct and use an internal table which resembles a database table or for
    processing large amounts of data.
    TYPES VECTOR TYPE HASHED TABLE OF I WITH UNIQUE KEY TABLE LINE.
    TYPES: BEGIN OF LINE,
    COLUMN1 TYPE I,
    COLUMN2 TYPE I,
    COLUMN3 TYPE I,
    END OF LINE.
    DATA ITAB TYPE HASHED TABLE OF SPFLI
    WITH UNIQUE KEY CARRID CONNID.
    with regards,
    B.Sowjanya,
    reward points if helpful.

Maybe you are looking for