Visual Web ICEfaces - 'library must not be null' error

Hi Everyone...
I installed the following plugins 'ICEfaces Run-Time Libraries' and 'VisualWeb ICEfaces'. I restarted the IDE and went on to create a 'Web Application'. I selected 'Visual Web ICEfaces' in the famework option and clicked on 'finish'. As the progress bar hits 75%, I am getting a message that says 'library must not be null' and there is no further progress beyond 75%. When I click on the 'library' tab, I can see 'ICEfaces Run-Time 1.8.2', so I dont understand why I am getting a 'library must not be null' error. Any idea why I am getting this?
OS: WinXP Professional
IDE: Netbeans 6.5.1

any clues anyone?

Similar Messages

Theme editor doesn't show - DesignManager must not be null error

Hi,
I'm experiencing problem with Theme Editor & default portal themes. Problem was probably started by importing custom themes from older version of portal (current configuration is NW2004 SPS19, Java stack). After entering System Administration / Portal Display, theme editor doesn't show up and defaulttrace contains following error:
#1#java.lang.IllegalArgumentException: DesignManager must not be null.
     at com.sapportals.portal.ssd.userInterface.InitialPage.<init>(InitialPage.java:74)
     at com.sapportals.portal.ssd.StyleSheetDesigner.doContent(StyleSheetDesigner.java:94)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
     at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
     at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:646)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
     at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
     at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:545)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
I've tried many things - delete custom themes (at first from Theme Archive, then from themes Integrity browser (...irj/servlet/prt/portal/prtroot/com.sap.portal.themes.integrity.browse) and finally I've found traces in the filesystem (I think it was .../irj/root/portalapps/com.sap.portal.design.urdesigndata/themes/customer)). So there should be no trace of custom themes in the system (as suggested in thread Theme Editor no showing content.), but the problem remains.
And there's more I found. We have 2 same systems installed on one server (both have own Oracle database+NW 2004 SPS19). The other portal works fine and without any problems, even with the same themes imported - it didn't create any error so I wonder if the problem doesn't lie somewhere else.
One more thing I noticed, which is different among these two portals, is the bahaviour of default themes - when I start ...irj/servlet/prt/portal/prtroot/com.sap.portal.themes.integrity.browse on both portals, the one which works, has also its and portal subnodes under every theme from SAP. On the other portal, only one theme shows all - the sap_chrome. Other themes contain only ur subnode. I've tried to compare filesystems of both portals (but only directries which I found through search for "sap_tradeshow"), but I haven't noticed any differences. What else could be different?
I tried many things, but without any effect. Could anyone help me, please? I'm running out of ideas and thinking about reinstalling the portal, which isn't prefereble solution.

Hi,
It's really hard to say, where's the problem. I think you should reinstall it..., probably some components of your EP wasn't installed correctly.
Regards,
Juraj

Visual web ICEfaces

Hello.....
what's plugins required for NetBeans 6.8 or 6.9 to install visual web java server faces or to install visual web ICEfaces
thanx.

I hope u have installed NetBenas with J2EE support.. So u must be hvaing JSf support there.
Along with that if u want to use ICEFaces .. go to Tools->Plugins -> Avilable Plugins -> Select IceFaces

Values in a DynamicConfiguration must not be null

In File to RFC to File synchronous method without BPM , i need to populate the file name for the receiver file dynamically.
So i have used UDF in RFC to File message mapping.
Z_RFC                                               MT_RCV_FILE
FILENAME                                          FILENAME
ITAB_OUT----
ITAB_OUT
   item        -
item
      STR1   -
STR
Created a UDF for FILENAME as below:
FILENAME -
> UDF -
> FILENAME
and coded as below:
try{
String FILENAME = " ";
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FILENAME");
FILENAME = conf.get(key);
conf.put(key, FILENAME);
return FILENAME;
catch(Exception e)
     String exception = e.toString();
      return exception;
when i test the mapping it shows an error :java.lang.NullPointerException
and while doing a full test it shows :
java.lang.IllegalArgumentException: Values in a DynamicConfiguration must not be null in SXMB_MONI
can anybody guide me to solve this error.

Hi Abhisek,
I have changed it to FileName and when i do a end-to-end testing it shows
Error: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Consistency error: more fields found in XML structure than specified in conversion parameters! (Value '20000000Test2222222220      Pass1')', probably configuration error in file adapter (XML parser error)'
The strucute of receiver File:
MT_RCV_FILE
     FILENAME          0 .....1
    ITAB_OUT           0......1
              item            0.....unbounded
                  STR1      0......1
In the receiver CC i have given the following parameters:
Target directory : /home/ftpusr/test/out
File name scheme : *
Content Conversion
ITAB_OUT.fieldFixedLengths 30,255
ITAB_OUT.endSeparator : 'nl'
item.addHeaderLine : 0
item.fieldFixedLengths : 255
item.endSeparator : 'nl'
where could be the problem?

Null in Composite Primary Key and "Primary keys must not contain null"

Hello all.
I'm a newbie concerning to JPA/EJB3, but I was wondering if toplinks doesn't support composite primary keys with null in some field (something perfectly right in any RDBMS).
I used JDeveloper (I'm using Oracle 10g database and JDeveloper 10.1.3.2.) wizards to generate JPA classes and I checked out generated files (with annotations), so they should be right (by the way, other O-R mappings for my model are working right, but this one).
I'm getting the next error:
Exception Description: The primary key read from the row [DatabaseRecord(
     TSUBGRUPOSLDI.CD_GRUP => 01
     TSUBGRUPOSLDI.CD_SUBGRUP => null
     TSUBGRUPOSLDI.CG_POBL => 058
     TSUBGRUPOSLDI.CG_PROV => 28
     TSUBGRUPOSLDI.DSCR => Sanidad)] during the execution of the query was detected to be null. Primary keys must not contain null.
Compound primary key is (CD_GRUP, CD_SUBGRUP). No foreign keys, no joins (only a NamedQuery: "select o from ..."). It's the simplest case!
I checked out that everything runs ok if there's no "null" value in CD_SUBGRUP.
After some research (this and other forums) I'm beginning to believe that it's not supported, but not sure.
Am I doing sth wrong? If not, what is the reason to not support this? Will it be supported in the future?
Thanks in advance.

Null is a special value and in many databases is not comparable to another null value (hence the isNull operator) and may pose problems when used to uniquely identify an Entity. TopLink does not support null values within a composite PK. As the nullable column is most likely not designated as a PK within your database table (many databases do not allow this) I recommend updating the Entity PKs to match that of the database.
--Gordon

Named query, primary keys must not contain null

We have an question on the named query. Here is the scenario:
Class JoinClassC (id, name, desc, comment) is mapped to two tables Join_Table_A (id, name, description) and Join_Table_B (id, name, comments); Join_Table_A is the primary table; two tables are associated via primary key.
Defined a named query (findByName, ReadAllQuery/SQL) for JoinClassC descriptor. The sql is:
SELECT a.ID,a.NAME,a.DESCRIPTION,b.COMMENTS FROM JOIN_TABLE_A a, JOIN_TABLE_B b WHERE a.NAME=#name AND a.ID=b.ID AND a.NAME=b.NAME
Getting QueryException while executing the query. Here is the trace:
[3/2/05 13:50:24:795 EST] f8b62aa SystemOut O 2005.03.02 01:50:24.795--ServerSession(738697921)--Thread[Servlet.Engine.Transports : 4,5,main]--Connection(1095574161)--SELECT a.ID,a.NAME,a.DESCRIPTION,b.COMMENTS FROM JOIN_TABLE_A a, JOIN_TABLE_B b WHERE a.NAME='persistence' AND a.ID=b.ID AND a.NAME=b.NAME
2005.03.02 01:50:24.835--ClientSession(1127670417)--Thread[Servlet.Engine.Transports : 4,5,main]--Exception [TOPLINK-6044] (OracleAS TopLink - 10g (9.0.4.4) (Build 040627)): oracle.toplink.exceptions.QueryException
Exception Description: The primary key read from the row [DatabaseRow(
     USER04.JOIN_TABLE_B.ID => 2
     USER04.JOIN_TABLE_A.NAME => persistence
     USER04.JOIN_TABLE_A.DESCRIPTION => FJF Persistence Fram
     USER04.JOIN_TABLE_B.COMMENTS => The Persistence Fram)] during the execution of the query was detected to be null. Primary keys must not contain null.
Query: ReadAllQuery(com.ford.it.persistence.unittest.dom.JoinClassC)Local Exception Stack:
Exception [TOPLINK-6044] (OracleAS TopLink - 10g (9.0.4.4) (Build 040627)): oracle.toplink.exceptions.QueryException
Exception Description: The primary key read from the row [DatabaseRow(
     USER04.JOIN_TABLE_B.ID => 2
     USER04.JOIN_TABLE_A.NAME => persistence
     USER04.JOIN_TABLE_A.DESCRIPTION => FJF Persistence Fram
     USER04.JOIN_TABLE_B.COMMENTS => The Persistence Fram)] during the execution of the query was detected to be null. Primary keys must not contain null.
Query: ReadAllQuery(com.ford.it.persistence.unittest.dom.JoinClassC)
     at oracle.toplink.exceptions.QueryException.nullPrimaryKeyInBuildingObject(QueryException.java:542)
Adding b.ID to the sql select will solve the problem.
Question: does the primary key must be present in the sql select to run this kind of query? Any way to work around the restriction?
Your help would be greatly appreciated.
Haiwei

The problem is that you need to select both primary keys for the multiple table descriptor.
i.e.
SELECT a.ID,a.NAME,a.DESCRIPTION,b.ID, b.COMMENTS FROM JOIN_TABLE_A a, JOIN_TABLE_B b WHERE a.NAME=#name AND a.ID=b.ID AND a.NAME=b.NAME
Your SQL needs to return the same data that TopLink would have selected, which includes the primary key for both tables. TopLink expects both a.ID and b.ID fields in the select, because your only select one and the field names are the same TopLink thought the ID field was for b.ID not a.ID, if you select both it will be ok.

Create Policy Resource Exception. Resource type must not be null

OAM version: 11.1.1.5
I have installed OAM 11g webgate but not able to register it from OAM admin console. It is throwing the error "Create Policy Resource Exception. Resource type must not be null" whenever I try to register the agent.
Also I don't see any resource types like Http,Tokenservice and wl_Authen in Resource Type link of OAM Admin console.
How to add these missing resource types in OAM 11g?
Thanks in Advance

Hi
I didn't find solution for this issue. As I got this error in my VM machine, I reverted my snapshot to "After installing WLS" and then I installed and configured OAM again. This time I didn't get the issue.
Good Luck.

The value must not be NULL

Post Author: rene.marxis
CA Forum: Charts and Graphs
copied from .Net-forum *** Hello we have one strange problem on one client where we use crystal reports.We have one application written in C# in VS2005 where we use some reports to that embed graphics generated from ZedGraph.The application works very fine on all clients except one.The
report is prety simple. There are only 3 image items on the detail
section and we pass the image data as a byte[] array to the report
inside our dataset. For every image on the report we get the following
error:"Crysytal Report Windows Forms Viewer"-"Der Wert darf nicht NULL sein.Parametername:path1"Which means "The value must not be NULL. Parametername: path1" We get the same errormessage for every image on the report.We
allready checked the data inside the dataset and it is filled of course
(also the same report works with the same data on other clients).Also other reports work fine on that client. Olny the once where image-data is passed from code is not working. Here is some additional data:OS: Windows XP ProfessionalCR-Files from: CrystalReportsRedist2005_x86.msm (27. Januar 2006)Language C# VS2005 Setup-Type: Install-Shield 12 (CR via merge-module) Here is some democode that produces the error (sorry i don't have permission to upload the project...) ZedGraph.ZedGraphControl zgc = new ZedGraphControl(); zgc.Size = new Size(950, 500); CreateChart(zgc); Bitmap bmp; MemoryStream ms; bmp = zgc.GraphPane.GetImage(); ms = new MemoryStream(); bmp.Save(ms, ImageFormat.Bmp); byte[] myImg = ms.GetBuffer(); ms.Close(); dsImage1.DataTable1.Rows.Add(myImg); MessageBox.Show("Len of image in DS:" + ((byte[])dsImage1.DataTable1.Rows[0]["Img"]).Length); rpt.SetDataSource(dsImage1); //here comes the error crystalReportViewer1.ReportSource = rpt; The dataset consists of oly on Img tag. Any suggestions? Thanks in advance rene.

Hi,
CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV Interface Mapping http://hsbc.com
IM_PAYEXT_PEXR2002_To_PEXR2002_BPM The value for the input paramter
DIRECTORYNAME must not be null
This is your error...make sure that when the mapping IM_PAYEXT_PEXR2002_To_PEXR2002_BPM is executed the element DIRECTORYNAME is present and is always containin some value...sort of mandatory field.
Regards,
Abhishek.

Stream not found null error

Hello everybody,
I am able to embed the strobe player on a web page and play flv videos. However, if I don't let the videoplay through and refresh my web page, then I am getting "We are unable to connect to the content you've requested" error.
When the video is played all the way to the end, I can replay it without any issues.
When I set the verbose value to true, I am getting Stream not found null error instead,
It seems to me that the strobe player can stream the video from server when it is not found in local cache. If the video is not cache completely in local machine, strobe player will display "We are unable to connect to the content you've requested" error.
Is there a setting in Strobe can resolve this issue?
The flv file is loaded on Windows Media Services 2008.
Below is my embed code. It is very standard that generate from the strobe setup page
<object width="470" height="320"> <param name="movie" value="myserver/strobe/flash101/StrobeMediaPlayback.swf"></param><param name="flashvars" value="src=http%3A%2F%2Fmy.domain.com%2Fnews%2Ftest.flv&optimizeInitialIndex=false"></par am><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="myserver/strobe/flash101/StrobeMediaPlayback.swf" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="470" height="320" flashvars="src=http%3A%2F%2Fmy.domain.com%2Fnews%2Ftest.flv&optimizeInitialIndex=false">< /embed></object>
Any help would be greatly appreciated.
Regards,
Joe

Hi,
On what browser does exhibit this behavior?
Can you provide a link to the video? You can PM it, if you want to keep it secret.
You might want to raise an issue at http://bugs.adobe.com/jira/browse/ST . It will allow us to prioritize and investigate it easier.
p.s. Optimize initial index works with MBR streams, you don't need it.

During iTunes installation "Registering iTunes automation server"... I am getting following error messag from "Microsoft visual C runtime Library"... Runtime Error! Program: C:\program files (x86)\iTunes\iTunes.exe

During iTunes installation, when it comes to installation phase "Registering iTunes automation server"... I am getting following error message:
"Microsoft visual C++ runtime Library"...
"Runtime Error! Program: C:\program files (x86)\iTunes\iTunes.exe"
"R6034
An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information."
My system is Windows 7 Enterprise - Service Pack1

Check the user tip below.
https://discussions.apple.com/docs/DOC-6562

Bound data node Node must not be empty- error

Hi All,
We created a new value node in the context for our data source and set the cardinality to 0..N. We know that we need to initialize and bind this but don't know how so we're getting the erro "bound data node Node must not be empty" when we run the form.
Please help.
Thanks,
Tyken

Hi Jurgen
Were you able to find out the solution for this? I am getting the same error on a much simpler application - I am trying to do the tutorial given on SAP Help Site at
http://help.sap.com/saphelp_nw04/helpdata/en/dc/f1783fe3263042e10000000a114084/frameset.htm
Thanks
Pankaj

Error message: the resource type must not be null.

Hi,
I have working on Integrating Oracle E-Business Suite Release 12 with Oracle Access Manager 11gR1 PS2 (11.1.1.7.0) using Oracle E-Business Suite AccessGate.
I am getting this error when I am Register the WebGate Agent with Oracle Access Manager. Please suggest me to fix the issue.
Thanks,
Gopi T

Hi Colin,
Thanks for the update.
which schema we need to check it ?.
Thanks in advance,
Gopi T

Re: Error message: the resource type must not be null.

Hi Gopi,
During the installation of OAM, default policy objects are created in the DB (actually this step is completed during the first startup of the OAM Admin Server). It looks like this step has failed for some reason. Possibly messages in the Admin Server logs may give some help, and it may just be possible to manually create some of the missing objects in the /oamconsole .... but almost certainly the quickest option will be to drop/re-create the schema and to re-run the OAM config in order to re-create the domain. When doing this, please verify that the OAM Admin Server starts without errors.
Regards,
Colin

Hi Colin,
Thanks for the update.
which schema we need to check it ?.
Thanks in advance,
Gopi T

Calling a CAF program via web service generates QName cannot be null error, but only for 1/5 of the same call in a parallel for loop.

I'm calling 5 identical web service calls using a parallel for loop in BPM. Obviously the data in each slightly differs. Why would this call suspend the process and give the following errors:
handleCommunicationError( ErrorContextData, Throwable, TransitionTicket ): A technical error occurred.
Interface namespace = myNamespace
Interface name = myService
Operation name = myOperation
Connectivity type = WS
Application name = myAppName
Reference name = 8bd95deb-8cf1-453d-94e5-0576bb385149
Message Id = null
WS style = DOC
Start time of WS call = 2014-02-26 17:51:23.297
Return time of WS call = 2014-02-26 17:51:23.412
Principal name = SAP_BPM_Service
Root error message = local part cannot be "null" when creating a QName
Error message = Could not invoke service reference name 8bd95deb-8cf1-453d-94e5-0576bb385149, component name myComp application name myappname
com.sap.engine.interfaces.sca.exception.SCADASException: Could not invoke service reference name 8bd95deb-8cf1-453d-94e5-0576bb385149, component name
myCompname
at com.sap.engine.services.sca.das.SCADASImpl.invokeReference(SCADASImpl.java:341)
at com.sap.glx.adapter.app.ucon.SCADASWrapperImpl.invoke(SCADASWrapperImpl.java:101)
at com.sap.glx.adapter.app.ucon.UnifiedWebServiceCallObject.invokeWebServiceOperation(UnifiedWebServiceCallObject.java:101)
at com.sap.glx.adapter.app.ucon.UnifiedWebServiceCallClass.invoke(UnifiedWebServiceCallClass.java:178)
at com.sap.glx.core.dock.impl.DockObjectImpl.invokeMethod(DockObjectImpl.java:657)
at com.sap.glx.core.kernel.trigger.config.Script$MethodInvocation.execute(Script.java:248)
at com.sap.glx.core.kernel.trigger.config.Script.execute(Script.java:798)
at com.sap.glx.core.kernel.execution.transition.ScriptTransition.execute(ScriptTransition.java:78)
at com.sap.glx.core.kernel.execution.transition.Transition.commence(Transition.java:196)
at com.sap.glx.core.kernel.execution.LeaderWorkerPool$Follower.run(LeaderWorkerPool.java:163)
at com.sap.glx.core.resource.impl.common.WorkWrapper.run(WorkWrapper.java:58)
at com.sap.glx.core.resource.impl.j2ee.J2EEResourceImpl$Sessionizer.run(J2EEResourceImpl.java:261)
at com.sap.glx.core.resource.impl.j2ee.ServiceUserManager$ServiceUserImpersonator$1.run(ServiceUserManager.java:152)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAs(Subject.java:337)
at com.sap.glx.core.resource.impl.j2ee.ServiceUserManager$ServiceUserImpersonator.run(ServiceUserManager.java:149)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:185)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:302)
Caused by: java.lang.IllegalArgumentException: Could not process message for operation myOperation in web service plugin module.
at com.sap.engine.services.sca.plugins.ws.WebServiceImplementationInstance.accept(WebServiceImplementationInstance.java:228)
at com.sap.engine.services.sca.das.SCADASImpl.invokeReference(SCADASImpl.java:314)
... 19 more
Caused by: java.lang.IllegalArgumentException: local part cannot be "null" when creating a QName
at javax.xml.namespace.QName.<init>(QName.java:246)
at javax.xml.namespace.QName.<init>(QName.java:190)
at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DInterfaceImpl.getInterfaceInvoker(DInterfaceImpl.java:126)
at com.sap.engine.services.webservices.espbase.wsdas.impl.WSDASImpl.<init>(WSDASImpl.java:43)
at com.sap.engine.services.webservices.espbase.wsdas.impl.WSDASFactoryImpl.createWSDAS(WSDASFactoryImpl.java:39)
at com.sap.engine.services.sca.plugins.ws.tools.wsdas.WsdasFactoryWrapper.createWsdas(WsdasFactoryWrapper.java:30)
at com.sap.engine.services.sca.plugins.ws.WebServiceImplementationInstance.initWsdas(WebServiceImplementationInstance.java:256)
at com.sap.
Surely if it was the service group unassign then reassign issue then none of the calls would have worked?

Hi David,
While a random error is still an error it will be difficult for support to find a problem for an error which is not reproducible. It is always a faster resolution if you can determine how to provoke the error and provide those details. If we can reproduce an error on internal systems then we can fix the problem quickly and without having to access your system.
regards, Nick

HT4059 Some books shown on my ibooks library will not open. Error message states that they are incorrecrtly formatted.

I have a number of books on my ibooks that will not open. I get an error message that says that they are incorrectly formatted or in an unrecognized format. What is going on?

Beverly:
Try opening the problem library on the HD, if you still have it, by launching iPhoto with the Option key depressed and, when asked, navigate to the external HD and select it. If it opens then you might be able to get it recognized by iPB. If you don't have the one on the external try the one in the Documents folder.
Does iPhoto Buddy create its own plist file in each of the library folders? If so then maybe it the problem. Remove it from the problem library and try relinking it.
I used to use iPB but changed to iPLM (although I like iPB's interface better) as it was compatible with V6 before iPB was.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.

Visual Web ICEfaces - 'library must not be null' error

Similar Messages

Maybe you are looking for