VisualAge RPG and crystal report + IBM Websphere Studio Dveloper client

Hi friends
My doubt is with regard to VisualAge RPG an alternative of java for AS400 servers yet iam posting here
I am trying to call Crystal report using VARPG The IDE used is IBM Websphere studio developer for iseries 6.0.
In VARPG GUI based windows application i am able to add Crystal Report Viewer (CRviewer.dll) to the ACtivex control object. I have to set the Report source and activate the Activex. The control has a property named ReportSource which is of numeric type. I tried to set the report source by calling openReport methox of Craxdrt.dll. I get a error as follows
0211 Error occurred while calling program or procedure OpenReport.
Cause . . . . . : The program attempted to call program or
procedure OpenReport, but was unable to access the program or procedure. If
the name is *N, the call was a bound call by procedure pointer.
Recovery . . . : Check the error log file FVDCERRS.LOG for more
information on the cause of the error. If the call was to a local
program, then the program could not be found, or the accumulated
parameters exceeded 1024 bytes in length. If not found, either specify
the full path name or make sure the program resides in a directory
listed in the PATH environment variable. Verify that the file
extension is correct. If no extension is specified, .EXE is assumed.
Is my way of calling crystal report is correct or i have to set the report source by any other way.
Thanks in advance
Ashokans

Vamsi
You ned to specify the location of the reports in the RAS server.
Follow these steps.
1. Go to the crystal configuration manager.
2. Click Crystal Report Application Server and stop the service.
3. Click the properties button.
4. Go to the parameters tab and from the option type select Server.
5. In the report directory text box, specify the director in which the reports are located.
6. Click ok and Start the Crystal Report Application Server
thats about it

Similar Messages

Crash call stack caused by crdb_adoplus.dll and crqe.dll on Crystal Report for Visual Studio 2008

Hi There,
i have an application running on C# .NET which use .NET Framework 3.5 SP1 and Crystal Report for Visual Studio 2008 x64. Now i'm facing the issue in application. suddenly my IIS crash , and the application is logout.
i have opened advisory case to Microsoft and they help me to analyze the dump from the application when the issue is happened.
here it is the stack trace :
STACK_TEXT:
00000000`9b1dd160 000007fe`eb93946d : 00000000`9b1dd308 000007fe`eb931948 00000000`00000000 000007fe`eb931610 : verifier!VerifierStopMessage+0x1f0
00000000`9b1dd210 000007fe`eb939736 : 00000000`9b1ddb50 00000000`00000002 00000000`00000040 00000000`00000004 : verifier!AVrfpDphReportCorruptedBlock+0x2a5
00000000`9b1dd2d0 000007fe`eb9399cd : 00000000`b32f1000 00000000`9b1ddb50 00000000`00000004 00000000`00001000 : verifier!AVrfpDphCheckNormalHeapBlock+0xce
00000000`9b1dd340 000007fe`eb93873a : 00000000`9b1ddb50 00000000`01001002 00000000`cca0c3b0 00000000`00000000 : verifier!AVrfpDphNormalHeapFree+0x29
00000000`9b1dd370 00000000`770b99a5 : 00000000`00000000 00000000`00000000 000007fe`f25514f7 000007ff`05f0a1d1 : verifier!AVrfDebugPageHeapFree+0xb6
00000000`9b1dd3d0 00000000`7705dbc0 : 00000000`b32f0000 00000000`cc16afb0 00000000`b32f0000 00000000`cc16afb0 : ntdll!RtlDebugFreeHeap+0x35
00000000`9b1dd430 00000000`7704413d : 00000000`b32f0000 00000000`9968aa01 00000000`00000000 00000000`9b1ddb50 : ntdll!RtlpFreeHeap+0x19a70
00000000`9b1dd770 00000000`76ef307a : 00000000`00000001 00000000`9968aa40 00000000`9b1dd958 00000000`cc16afb0 : ntdll!RtlFreeHeap+0x1a6
00000000`9b1dd7f0 00000000`9739cabc : 00000000`00000000 00000000`9968aa40 00000000`000002a3 00000000`cc13ef28 : kernel32!HeapFree+0xa
00000000`9b1dd820 000007fe`f2550e37 : 00000000`00000000 00000000`24b20fc0 00000000`0000001b 000007ff`0604a340 : msvcr90!free+0x1c
00000000`9b1dd850 000007ff`05f05802 : 00000000`00000000 000007ff`0604f7c0 00000000`9b1dd958 00000000`9968aa40 : mscorwks!DoNDirectCall__PatchGetThreadCall+0x7b
00000000`9b1dd8f0 000007ff`05f0a231 : 000007ff`0604f730 000007ff`05f05802 00000000`cc16afb0 00000000`0000001b : DomainBoundILStubClass.IL_STUB(Void*)+0x42
00000000`9b1dd9b0 000007ff`05f0a1d1 : 00000000`cc16afb0 00000000`000007d4 00000000`9b1dd2e8 00000000`00000000 : crdb_adoplus!<Module>.DbFieldInfo.{dtor}(DbFieldInfo*)+0x11
00000000`9b1dd9e0 000007ff`05f0a177 : 00000000`0000001c 00000000`cc13ef20 00000000`00000000 00000000`00000000 : crdb_adoplus!<Module>.DbFreeFieldList(UInt32, DbFieldInfo**)+0x31
00000000`9b1dda30 000007fe`f254f18a : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : DomainBoundILStubClass.IL_STUB(Int32, Int64)+0x7
00000000`9b1dda60 00000000`9a506b36 : 00000000`0000001c 00000000`cc13ef20 00000000`00000000 00000000`00000000 : mscorwks!UMThunkStubAMD64+0x7a
00000000`9b1ddaf0 00000000`9a583538 : 00000000`bf35af90 00000000`bf9bcfa0 00000000`9b1ddd30 00000000`00000000 : crqe+0x16b36
00000000`9b1ddca0 00000000`9a6c1c64 : 00000000`bec28dc0 00000000`cd926e60 00000000`00000000 00000000`cbafcf20 : crqe+0x93538
00000000`9b1ddf90 00000000`9a6bc697 : 00000000`cd926e60 00000000`00000000 00000000`00000000 00000000`00000000 : crqe+0x1d1c64
00000000`9b1de000 00000000`b64fcab9 : 00000000`cd926ec0 00000000`9b1de0c0 00000000`00000000 00000000`b6dee2cb : crqe+0x1cc697
The crdb_adoplus tried free a corrupted Heap Block:
0:188> dt DPH_BLOCK_INFORMATION 000000009b1ddb50-40
verifier!DPH_BLOCK_INFORMATION
 +0x000 StartStamp : 0
 +0x004 PaddingStart : 0
 +0x008 Heap : 0x00000000`9b1ddb58 Void
 +0x010 RequestedSize : 0x9b1ddb50
 +0x018 ActualSize : 0x9b1ddb30
 +0x020 Internal : _DPH_BLOCK_INTERNAL_INFORMATION
 +0x030 StackTrace : 0x00000000`00000001 Void
 +0x038 PaddingEnd : 0
 +0x03c EndStamp : 0
is this problem solved by upgrading Crystal Report version to CR12 ?
Thank you,
Best Regards,
Leonardus Tono Amboro
IT Enterprise System Architect
PT Astra International Tbk.
AMDI A Building, 7th Fl.
Jln. Gaya Motor Raya 8. Sunter II, Jakarta 14330, Indonesia
Message was edited by: Ludek Uher
Phone number removed - Please see the SCN Rules of Engagement

Hi Leonardus
Please define "crash". What actually happens?
Did this ever work? E.g.; this started to happen recently?
Is this happening on your development system or QA or production?
See if enabling the option "Verify on 1st Refresh" will help.
Make sure you are using SP 1: Crystal Reports for VS 2005 and VS 2008 Updates & Runtime Downloads
Ensure that the dataset is less that a couple thousand rows. Anything more than that will cause issues...
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow me on Twitter

Crystal report for visual studio 2005 dblogin problem

Dear Sir,
I am using Visual Studio 2005 and crystal reports for visual studio 2005 and sql server 2000.
When I am running the project from my pc where it was developed and a local server with server authentication, report is opening but from client machine there is a new screen come before opening the report asking for login issue. my reports has subreports
also.
I am using dsn file to connect with server from crystal reports where dsn file contains as follows:
[ODBC]
DRIVER=SQL Server
UID=sa
PWD=sa
DATABASE=HRISDB
WSID=S-AGD-PAY01\HRSERVER
APP=Microsoft Data Access Components
SERVER=S-AGD-PAY01\HRSERVER
so it is dynamic bcoz i need change server name sometimes. my question is when same report want show user from their pc then below screen appears:
database login
server Name: C:\program files\HRIS\HRISDB.dsn
Databse: HRISDB
user id:
PassworD:
Integrated Security: it is checked and a finish button.
(i am sorry bcoz screenshort is not attaching so I write above what in the diagloag box for you)
then i need to uncheck the use integrated security and click finish then the reports come. THis is very annoying for my clients.
Please help me how can I overcome it.
It is mentionable that I didn't use any dblogin method in my code to like setdbloginforReport(). I think there is no problem bcoz the report show correctly. Just want to know how to overcome this screen.

You know, this forum is for controls, apis, components for the user interface Windows Forms.
Unlucky enough, Microsoft does not support Crystal reports anymore for many years.
Try the Crystal reports forum for .Net
http://scn.sap.com/community/crystal-reports-for-visual-studio
Success
Cor

Visual Studio 2005/2008 and Crystal Reports versions/upgrade questions.

I've tried posting this question on the MSDN forums and gotten no response.
I've downloaded and installed VS 2008 Beta 2.   The versions on the Crystal Reports files included are 10.5.0.1806
I'm currently using VS 2005, with the included Crystal Reports. The versions on those files are 10.2.0.xxxx. I've created an desktop app (in VB) which stores it's data in a database and uses the CR 10 runtime merge modules to generate a report.
I was considering upgrading the Crystal Reports version to XI. I would like to allow customers to modify my delivered report with their own licensed copy of CR XI. I am not providing any functionality within my app to create or modify the delivered .rpt or use it outside my application.
Questions:
Do I need to update the runtime files to CR XI to support rpt files modified with CR XI? Current runtime files are being delivered with the CR 10 merge module.
I see a Crystal Reports for Visual Studio upgrade to CR XI.
Can I update the merge modules to CR XI and still use the CR for VS2005 for development?
Does it make any sense to update CR for VS 2005? Or to get the full CR XI Developer edition? My usage of CR functionality is very limited.
Would there be any benefit to waiting for the release of VS 2008?   How does that change the scenario?
How does Crystal Reports for Visual Studio fit in with the Crystal Reports Lifecycle? It's not mentioned on Business Objects End of Life Dates page . Crystal 10 has a Patch EOL of 31-Dec-07.   Does this apply to CR for VS 2005? Where does 10.5 fit in?
My main concern is allowing customers with CR XI to change the format of my delivered .rpt to run with my app. Adding their company name, logo, etc.   My testing show a CR XI report still works with my current app. But, going forward, what should I deliver and what do I need to use to continue development?

To use Reports designed in XI, you need to use XI or higher runtime, running them in older versions may work, but you may encounter unforeseen issues doing so.
If you are to use VS2005 for development you need to use XI Release 2 (11.5) runtime.
If you are going to use VS2008 for development you need to use Crystal Reports 2008 with Service Pack 0.
The support end of life for versions of Crystal Reports bundled with Visual Studio are linked to what Microsoft's lifecycle for the product is. Generally if there is a workaround for the issue that is simple enough, there will not be a patch created.
The changes you are expecting the customer to do can be accomplished with our RAS SDK which is available without using enterprise starting with Crystal Reports XIR2 SP2.

Crystal Reports for Visual Studio and (Wcf) Web Services

I´m evaluating Crystal reports for Visual Studio 2010. I want to read data from a (Wcf) Webservice into the predefined Reports and deliver them to the Users in an ASP.NET Application. As far as I see reading Webservices via the XML/Webservice datasource works good in the Crystal Reports 2011 Applications - But I have Problems with the Integration of the XML/Webservice datasource in the CRVS2010 Environment.
I read your Article on sdn: http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/13732
which helped us to enable the XML Datasource in the CRVS2010 environment on a Machine where Crystal Reports 2011 and VS2010 is installed, but this required copying DLL´s and installing the JRE.
But I´m not able to run the XML/Webservices datasource on a webserver in a ASP.NET Application where Crystal Reports 2011 is not installed (only the runtime) - the above post doesn´t help because the path structure is completely different on my machine. Is there a manual, which helps me to enable the XML datasoucre and the CRVS2010 runtime ?
I´m not sure if reading XML is the best practice for a new Project, especially after reading your article at http://forums.sdn.sap.com/thread.jspa?threadID=1952093
I´m now evaluating ADO.NET XML as mentioned in your article, but I´m not sure if this is the right decision.
Is there a a new version for Visual Studio 2010 of the u2022csharp_web_adonet.zip example ?
BTW: All examples in the Sample Code for Crystal reports for Visual Studio 2010 reference Assemblies in Version 14, which are not present on my machine. I had to find/replave 14 through 13, before they are compilable. Did I made a mistake during installation ?

Hi Henrik,
First of all you didn't make any mistake installing CRVS2010. It has assemblies with version 13.x
Now as far as patches are concerned ensure that you are on SP2. You can get runtime and patch from following:
http://www.sdn.sap.com/irj/sdn/crystal-xcelsius-support?rid=/webcontent/uuid/d01fdad8-44e5-2d10-61ad-9d2d4158f3a8
You can opt for AD.NET as one of the datasource but what is the error/ warning you get when you use Web Serive as datasource?
You can find the latest samples created for CR2008 here
http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/d0bf8496-2a81-2b10-95ac-b1f48d5b63f5
- Saurabh

156" width Crystal Report with Visual Studio 2005

Post Author: kunchesm
CA Forum: .NET
Hi,
I have a requirement to design a 156" width report (for exporting to Excel). And naturally i dont have printers to support this huge width reports (as these reports are not used for printing but just for exporting to Excel).
One of the option which i have tried to design these reports is -
- Installed MIcrosoft XPS Document writer and
- Created a new server form (in Printers&Faxes>File>Server Properties) and assigned my custom width & Height for the paper size as per my requirement
- Used this printer and form in my crystal report
Now, my question... is there any better alternative or option to design huge width Crystal reports in Visual studio 2005? Any help in this regard is highly appreciated!
Thanks & Regards
ksm

Hi Ganesh,
So it all depends on how you created your WEB Project. If it was a CR Web App then no issues, if it was a WEB Form app then no issues except you need to copy the whole folder: C:\inetpub\wwwroot\VS2013WebsiteCR\aspnet_client
to your app folder, maybe...
If it was an empty WEB app then it may be an issue with permissions ( more on this soon once we do some testing, R&D may have provided a work around to get IIS Express to work, not sure about using IIS directly.
Also search on Sessions and PostBacks, to get the second page you need to keep the session open/active. If not you may get nothing ot the same page everytime.
Don

VS2013 and Crystal Report Layout printing

Hi,I use VS2013 and Crystal reports.  In my program i also use direct print from the form (not by crystal reports).When I first print a documten from a form,
and then I take a printpreview from a crystal report, the lay-out is not correct.As example I put 2 screenshots:first correct - second after printing from formI
hope somebody can help me.Thx<img alt="right" src="https://social.msdn.microsoft.com/Forums/getfile/564644" /><img alt="wrong" src="https://social.msdn.microsoft.com/Forums/getfile/564645"
/>

Hi Detleff,
Thank you for posting in MSDN forum.
Since this forum is to discuss: Visual Studio WPF/SL Designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System, and Visual Studio
Editor. Based on your Crystal Reports printing issue, I’m afraid that it is not the correct forum for this issue. Therefore,
I suggest you can ask your issue directly on SAP Crystal Reports:
http://scn.sap.com/community/crystal-reports/content?filterID=content~objecttype~objecttype[thread]
for better solution and support.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Crystal Reports for Visual Studio 2008 - dbf

Hello,
I use both Visual Studio 2005 and 2008 on same PC. I can not work with dbf files (format foxpro2x, dbase IV) in VS 2005 and VS 2008.
Q1. Work Crystal Reports for Visual Studio 2008 with database files - dbf (version foxpro2x, dbaseIV)? I get error -
Crystal Reports ActiveX Designer
Failed to load database information
or with dbf files work only Full version of Crystal Reports?
Q2. How re-install Crystal Reports for Visual Studio 2008. In setup Add/Remove features not exist Crystal Reports check box. I only Repair/reinstall all Visual Studio but after reinstall same error
Crystal Reports ActiveX Designer
Failed to load database information
3. When I can open sample project with Crystal Reports which use Crystal Reports (dbf file) this error is displayed:
Crystal Report Viever
Failed to load database information
Details: The database DLL "crdb_p2bxbse.dlll" could not be loaded.
4. I reinstal Crystal Report in Visual Studio 2005 - same error
5. I apply hotfix Crystal Reports for .NET 2005 - SP 1 - same error
Thank You
Ludek

Hi Ludek,
1-For dbase file to work you need have permission on database files for IIS as well as user accessing the database.
2-For re-install you need to insert the CD of visual studio setup then do custom install and then try to choose crystal reports for re-installing
3-The old viewer might cause the problem. In this case can you try connecting to a blank dbase file.
and for such issues we have a special forum [here|SAP Crystal Reports, version for Visual Studio;
Thanks,
Hitesh Mangtani

Migrating from 32 bit to 64 bit verison of Crystal Report on Visual Studio C++ App

Hi ,
I am working on a C++ Migration project in which I need to migrate all our code from VS2005 to VS2010.
And also I need to change the architecture of it, previously it was on x86 arch. now I need to port it to x64 Arch.
The problem is that we are using Crystal reports and Crystal report viewer in out project which is of 32 bit.
And to make it workable I havee to use Crystal report of x64 bit.
TO compile the application correctly Ineed some of .dll and .h files of Crystal reports(It's how we build the C++ solution).
I downloaded bunch of trial versions from the site including following
SAP Crystal Reports 2013 30-Day Evaluation
SAP Crystal Server 2013
Installation package which installs the software into the Visual Studio IDE
SAP Crystal Reports runtime redistribution packages (no IDE integration)
but in any of installation I didn't find the lib or inc folder.
Am I missing any thing here?
Regards,
Sagar K.

Good questions:
1. What is the equivalent of Report Designer COM (CRAXDRT) in Java that I can leverage to create reports?
I am not sure what you are specifically referring to when you say "Report Designer COM". The RDC had what was called the "Embeddable Designer" that you could run in a VB app and the users could design reports on the fly. There is nothing equivalent to that in any CR SDK anymore. There are "Report Creation APIs" available in RAS, but no runtime designer as such.
2. Can I use RAS in Java to trigger ActiveX controls to open/print RPT's using Crystal Reports Viewer?
Well, ActiveX viewer is gone - only activeX component is for client side printing using the .NET amd Java SDKs.
3. Does the Eclipse kit have everything I need here? Will this work with CR2013?
Yes, it has everything you need and even though the CR for Eclipse is CR 2008 equivalent, reports created in CR 2013 will work fine.
Just an FYI, there should be an update for CR for E sometime later this year, but an ETA is not even on the horizon yet.
- Ludek
Oh - I think this forum post will be of interest:
CRJ SDK
Message was edited by: Ludek Uher

MySQL 5.5, Crystal Report for Visual Studio not working when hosted IIS

Software and Component detail
Microsoft visual studio 2010
MS .NET Framework
Version 4.0.30319 RTMRel
MYSQL SERVER Database
Version 5.5
MySQL Connector 6.6.4 64 Bit
MySQL ODBC Driver Version 5.2.a
Crystal Report for Visusl Studio 64 Bit 13.0.5
(CRforVS_redist_install_64bit_13_0_5)
Current Setup
1. I have WebSite in ASP.NET Visual Basic which works fine and is connected to MySQL Database, using MySQl Connector 6.6.4 64 bit
and is using a connection string,defined in web.confg.
2. I am using a Crystal report( It is very complex report, so cannot dare to redo it). Data Source for the report is set using a connection string
DRIVER={MySQL ODBC 5.2a Driver};SERVER=Licensedb;DATABASE=License;pwd=root;PORT=3306;OPTION=3 and this report is called from website using the below code
Dim crystalReport As ReportDocument = New ReportDocument()
Dim repPath As String = Server.MapPath("~/Reports/") + "LicenseReport.rpt"
crystalReport.Load(repPath)
CrystalReportViewer1.ReportSource = crystalReport
crystalReport.SetParameterValue("InstanceID", CInt(Session("sessionInstanceID")))
crystalReport.Refresh()
crystalReport.SetParameterValue("InstanceID", CInt(Session("sessionInstanceID")))
CrystalReportViewer1.Visible = True
3. The above setup works fine, when I run the website from Visual studio 2010. But when i use IIS 7, the aspx page having crystal report viewer control load and its blank.
However it work very well from studio it self.
4. So I changed the setup in point 2, by having a ODBC Data source defined. And changed the report accordingly. It work fine in Visual studio , but from IIS
it gives error "Failed to Open Connection, Failed to Open Connection <Crystal Report File name.rpt>"
5. I tried creating a System DSN and same connection string in IIS Application Connection string. But nothing changed.
Please can anyone point in correct direction. I must admit this is my first website development work, so I might have overlooked some minor details.
Any help would be much appreciated.
Thanks
Dilpreet ([email protected])

hello again. I fear that what is said in that article does not apply to my particular case.
First of all i am using the Crystal Report Basic 2008, which I think is not the same product as Crystal Reports 2008.
In addition, printing fails always, on my PC and on the web server.
On the other hand I can not find anywhere printcontrol.cab file or printcontrol.dll, just do not exist either in my PC or on the web server.
The folder where the report viewer is located is not CrystalReportViewers12, is CrystalReportWebFormViewer4, and is located at wwwroot\aspnet_client\system_web\2_0_50727\
Investigating I found something, but has not helped me:
[http://social.msdn.microsoft.com/forums/en-US/vscrystalreports/thread/0af08d25-dd71-41ce-92fa-ca374f933eaa/]
This problem is what always happens to me when on my local PC I access my web server by its public IP.
I think I must resign myself to use only the PDF print
thanks anyway

Limited features for crystal reports in visual studio 2005

Post Author: jag
CA Forum: .NET
Hello All,
I have problems in finding solution for the following problems in line graph in crystal reports in visual studio 2005.
1)Cant customize the colour of line in the line graph. (line by series only i wanted not by group)
2)Cant customize the width of line.
3)Cant customize the line style display.
4)Cant customize the trend line or target line.
Can you please help in resolving these problems....
Do i get any extended crystal report software for visual studio 2005 to get all features in crystal reports 10 r 11 versions?
Do you recommend 3dgraphics macros is better and economical to get extended features of crystal reports in visual studio 2005?
Can anyone please help me..iam in need of these solutions urgently....
Thanks in advance for your time......cheers

Post Author: Argan
CA Forum: .NET
I am not really familiar with all of the options for charting and what is or isnt in the bundled version.
You can download the CR XI R2 developer edition eval from the website and see if it gives you the graph options that you want. If it does then I think you can buy it at an upgrade price since you already have the bundled edition.

Crystal Reports for Visual Studio 2010 runtime LICENCE

I want to welcome everyone. It's my first post on this forum.
I want to provide my Windows Form application to a client. This application was written in VS 2010 and it uses SAP Crystal Reports for generating simple report.
I've read [Crystal Reports Licensing Explained|http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/10cd9e15-120d-2c10-3fb5-be299000b6b7&utm_source=crvs2010&utm_medium=lp&utm_campaign=licensing_explained] pdf and I've learnt that in my case redistribution of software that embeds the Crystal Reports runtime engine is free.
My question is:
Is there something else I must include in my application package for instance a licence file? Or maybe I just have to include SAP CR runtime or ask user to download it from the SAP web site and that's it?
Marcin

Hello Marcin,
Welcome.
Please note that whenever you distribute your application (which uses Crystal reports) to others who may not have Crystal designer product, you need to provide the runtimes along with the application. The runtimes provide the necessary dlls in the machine for running Crystal inside the app.
You can use an exe to install the CR runtimes and then deploy your app. OR you can include the msm files and create a deployment package.
You will get the runtimes for CR4VS2010 [here|/people/coy.yonce/blog/2010/11/12/crystal-reports-for-visual-studio-2010-production-release-now-availableCystlR%2528SAPWeblogs%253ACrystal+Reports%2529].
You might want to check [this|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313335333833323336%7D.do] link for details.
Forgot to mention:
we have dependency on C++ runtimes. Please look at [this|Visual studio setup project with merge modules - C++ problem; thread for details or do a quick search, in this forum.
Hope it helps.
Thanks.
Edited by: A G on Dec 2, 2010 6:03 PM

Image Quality In Crystal Reports for Visual Studio 2010

I am using the new production release of Crystal Reports for Visual Studio 2010 and I am having an issue with image quality when adding an image to a crystal report.
The image itself is a .TIF file, and when opened in Windows, the quality of the image, which is mostly text, is very high. The image was created from a electronic PDF form and I intend to use this as a background for the crystal report, over which I will place data fields.
As soon as the image is added to the report you can see the degradation in quality in the design window and in the preview window within visual studio. The quality remains low when viewing the report in the WPF report viewer and when printing from this control.
I have ensured the "Retain Original Image Color Depth" option is checked but this has made no difference (the image is black and white anyway).
The image in the report has been left at its native size, no resizing at all. The image is 355KB in size if that's relevant.
Is there a reason the image looses quality when added to a report? Is it being compressed? More importantly, is there a way to make the image retain its native quality when adding it to a crystal report?
Thanks in advance.

The following image is the image I am trying to display. Although imageshack has converted it to a png, if you right click and save the image you can open it and zoom in with little image degradation.
http://img132.imageshack.us/i/j301.png
The following is a screen shot of how the tif file looks in the designer when zooming in:
http://img138.imageshack.us/i/j30lowquantity.jpg
The second image has lost its clarity and is unusable when printing.
I hope this helps.

Vb6 deployment and Crystal Report 8.5

Hi,
I tried to deploy a Visual Basic 6 on a client pc that use Crystal Report 8.5.
Because no merge files exist for this version of Crystal Report I tried to added all the necessary dll in the deploy package (using visual basic 6 tools deployment).
I read the file Runtime.hlp so I added every dll wriiten in this file.
When I run my setup I always have this error :
The program can't start because CRPE32.dll is missing from your computer.
It's strange because I added this dll to my deployment package.
So I don't no what to do anymore.
Need some help to solve this problem because I know it's easier with more recent version of Crystal Report because of the merge file but right now this software need CR 8.5.
Regards,
Hugo

Hi,
Ok here what I'm trying to do.
I have an application Visual Basic 6 that use crystal report 8.5 to export the report in pdf using the dll cradxt.dll by programming.
On the dev pc I have Visual Studio 6.0 and Crystal Report 8.5 installed.
I want to install this software on another PC so I created a deployment package, automatically the pakage added the "necessary" dlls.
But is not enough I need to added more on the client pc so it's hard even if I read the Runtime.hlp that come with Crystal Report 8.5 and I added all the dll it always seems to miss somes.
So I was wondering if a merge module or something exist like the other version of Crystal Reports to install the necessary dlls on a clients pc.
Otherwise what is the best way to do it ?
Regards.

Need help in creating table in crystal report for visual studio 2010

Since there is no table support in crystal report,how can I create a table in crystal report for visual studio 2010?
I have a datatable and I need to show that in crystal report in table structure.
I have tried using lines and boxes to generate the table but it is not working perfectly.
How can I export the report in excel format in read/write mode saving all the formatting in the report

Hi,
Check sample codes from following:
http://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsSDKSampleApplications
You can download the [Developer's Guide|http://help.sap.com/businessobject/product_guides/boexir31/en/crsdk_net_dg_12_en.chm] & [API Guide|http://help.sap.com/businessobject/product_guides/boexir31/en/crsdk_net_apiRef_12_en.chm]
Thanks,
Saurabh

VisualAge RPG and crystal report + IBM Websphere Studio Dveloper client

Similar Messages

Maybe you are looking for