Visualisation issues even after changing gfx.direct2d.disabled to be true

I had a really weird defect rendering text and pictures. Searched in the net and found out the resolution to change the value of gfx.direct2d.disabled from false to true. Things went better and now I see pages well. However I still discover issues especially with drop-down menus - I can't see any of them. Also if for example my download finishes the little pop-up window which appears at the bottom right corner is visualized in the same manner - blurred white-blue lines with nothing that can be distinguished. I'd be glad if I could send you a snapshot. The problem does not persist in other browsers , so it's not a hardware one.

Hello, toggle the '''gfx.direct2d.disabled''' to false again, and toggle the '''gfx.content.azure.enabled''' to false, and check firefox again, otherwise try to
disable hardware acceleration in Firefox, go from Firefox button > Options Oprions > Advanced > General > Browsing: "Use hardware acceleration when available" [ ].
thank you

Similar Messages

I have vertical lines when printing even after changing cartridges.

I have vertical lines when printing even after changing cartridges. There are no lines when copying, faxing or scanning, only printing. I have cleaned the glass, scanner and even dusted where the toner cartride slides in. Any suggestions?

Sorry but I have worked on laser printers for over 20 years and never encountered your issue. That is of course if you are explaining it correctly. When you make a copy to be printed or print a reports page from the printer or send a print job to the printer, if in all these cases you get the line, then yes the issue is either the toner cartridge or the fuser. If you make a copy to be printed and it prints without the line (Put original in adf, press copy button and print should come out), then you have one weird unit since it does not make sense since the print formatter on the unit whether making a copy or printing from the computer or unit itself uses the same hardware. Now to test if the printed copy has a line then just put a sheet of paper on top of the feed tray and do a self test from the printer. When the back edge of the paper enters the printer, quickly open the toner door to stop the printing. Remove the toner cartridge and look at the image below. If the defect is present the toner cartridge is the issue and if the image below does not have the defect, then the fuser needs to be replaced. Best I can do. Good Luck.

My remote wont turn the appletv on even after changing battery and unplugging everything and plugging it back in

my remote wont turn my appletv on even after changing the battery

Nothing, the light didn't flash at all? If so you either have a dead remote or a dead Apple TV.
If you have a Mac you can try pairing the remote with it to test. Go to System Preferences->Security & Privacy and unlock the panel. Click the Advanced button and look for the Disable Remote Control Infrared Receiver checkbox. Clear it and click the Pair button. If the remote is ok you should be able to pair it to the Mac.
If you can't pair the remote it most likely pints to a bad remote. If the Apple TV still won;t respond then you need to get the Apple TV looked at.
Good luck

HT1491 My password in iTunes will not work, even after changing it. It keeps showing a window to add PW. I do and it pops up again.

My PW in iTues will not work. Even after changing it. Window pops up and ask for PW. Over and over.

I would be worried about that - but it may turn out to be nothing.
Since you already changed your password, you're probably OK - but I recommend looking at your purchase history to see if there's any unauthorized purchases (use iTunes on your Mac or PC to go to the itunes store, then click your account in the upper-left or upper-right corner). If there are any new purchases that you didn't make, click the button to report problem (and if they happened after you reset your password, you should immediately change your password again).
I think sometimes when you change your password and verifiy your credit card info, it can "reset" the warnings - so it may actually have been you logging in to your own account that caused you to get the warning. But I'm not absolutely sure of that, so it's best to check your purchase history (and reset your password if necessary - but you already did that).
I also recommend turning on "two-step verification" (but Apple makes you wait a few days after changing your password to turn that on). With "two-step verification", Apple will send you a text message with a 4-digit code the 1st time you try to buy something from a new computer - since a hacker won't have your phone, they won't be able to continue (theoretically). After the 1st time, it goes back to mostly working normally (until the 1st time you try to purchase from another new computer, then you get another text message - so this alerts you to someone, somewhere else, trying to get into your account).

Cwallet.sso failed even after changes made to cwallet security properties

WARNING: Opening of wallet based credential store failed. Reason java.io.IOExcep
tion: F:\oracle\middleware\user_projects\domains\obiee_domain\config\fmwconfig\b
ootstrap\cwallet.sso (Access is denied)
Oct 19, 2011 6:20:12 PM oracle.security.jps.internal.keystore.file.FileKeyStoreM
anager openKeyStore
WARNING: Opening of file based farm keystore failed.
cwallet.sso failed even after changes made to cwallet security properties in bootstrap

The user you logged in does not have permissions to access cwallet.sso file and hence, it says access denied. Try to check the permissions and add the user, who is trying to start weblogic server.
-Vamsi

30EA1--Database Diff not working even after changing Tools Preferences

Trying to use Database Diff but even after changing Tools > Preferences > Database > Licensing, I still get the error message saying I have to make changes to the Licensing check box. Anyone have a workaround or experience the same problem?

When you connect to any database error disappears, but still it's a bug.

My canon sx120IS continues to show low batter and shuts off even after changing the batteries.

My canon sx120 is continues to show low battery and shuts off even after changing the batteries. Any suggestions? Do I need to send it for repair somewhere, and if so, where?

Hi LB!
Thank you for posting on our forum!
Try cleaning the electrical contacts on the camera and the batteries using a soft microfiber cleaning cloth. If the same warning still displays, then the camera will need to be serviced. To start the repair process, you'll need to complete a Repair Request on our website.
If the camera is more than a year old, you may participate in the Canon Loyalty Program instead. The Canon Loyalty Program option allows you to replace your current camera for a discounted fee, plus shipping. The original non-functioning camera would then be returned to Canon USA for recycling using a prepaid shipping label that would be provided.
If you would like to take part in this option, please call our Sales Department at (800) OK CANON (800-652-2666) seven days a week, 8am to Midnight. Let them know you have been working with online support and the Canon Loyalty Program was offered. Be sure to have your serial number for your camera at the time of your call.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

My vi is writing just the same data into spreadsheet even after changing the loop iteration time. hw can I change this mode ?

My VI is writing the same amount of data into spreadsheet file even after changing the for-loop iteration time

You should post the VI (with appropriate values saved as default) to this thread. (At least a JPEG or PNG screenshot).
Inside the For Loop, right-click on the N terminal and create Indicator. Run the VI and you will see how many times the Loop spins.
Further guessing: You may have a 2D array with two rows and many columns feeding the For Loop.

HT3176 my apple remote will not link to my appletv even after changing the battery

my apple remote will not link to my appletv even after changing the battery. can anyone help?

Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen.

While i was updating my iphone5, it showed that my sim card is not applicable. even after changing the sim card, i am not able to update or restore my iphone. what should be done?

while i was updating my iphone5, it showed that my sim card is not applicable. even after changing the sim card, i am not able to update or restore my iphone. what should be done?

Hi there aliyan,
I would recommend taking a look at the troubleshooting steps for "No SIM" found in the article below.
If you see 'No SIM' alert on iPhone
-Griff W.

I cant get onto my MobileMe account even after changing my password

I am stuck as i cant sync or anything on my mobile me account even after changing password can anybody shed some light on this.

If the user account is associated with an Apple ID, and you know that account password, the Apple ID can be used to reset your user account password.
Otherwise, boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select Utilities ▹ Terminal from the menu bar.
In the Terminal window, type this:
resetpassword
That's one word with no spaces. Then press return. A Reset Password window opens.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select  ▹ Restart from the menu bar.
You should now be able to log in with the new password, but you won't be able to unlock the Keychain. If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it. You’ll need to reset your keychain in the preferences of the Keychain Access application.

Can't log in (Mac OSx 10.6.6) even after changing the password 8 times!

Not happy.I can't believe how hard it is to get support from Spotify for a service I am paying them for! Having to trawl through chat rooms is not customer care! Basically, I can't log into Spotify even after changing my password. I am at work but the tech bods say it should work fine (always has done until now). I just need someone to let me into the service I am paying for!If anyone see's anyone from Spotify hiding anywhere, please let me know.

If I follow that link you just sent me and use my email address for the username (I don't have/ can't remember my username) and put my password in it doesn't work. If I use my email and password to log in (using the link sent to my email to reset my password) it logs in fine. It doesn't recognise password on the Spotify App

I'm using lion 10.7.1 and ever since upgrading my preferances are not saved after I shut off the computer. My screen saver is always photos even after changing it, itune always asks if I want to upgrade, even after telling it never to.

When I turn off the computer my preferances are forgot. My screen saver aways goes to photos. Ittune always ask if I want to upgrade even after telling it not to . firefox always goes the upgrade page a progam I have to save my clipboard resets itself.

This does appear to be an issue with synergy, but I've also noticed on my C2D Macbook Pro that the screen does not wake from sleep when I simply touch or move around on the touchpad. Now, I have to hit a button (like return) to get the monitor to wake up. Submitting a button strike through synergy does not work, though. Neither does a mouse click on either the trackpad or through synergy.
It also appears that synergy is functioning even though the monitor is off. My mouse does move to the screen and progress across it (I have a three monitor setup with the Mac in the middle, so I can move it off my left system to my Mac, keep moving, and eventually it will show up on the third screen). If synergy weren't working, I would expect it to go from screen 1 to screen 3.
So I think there's something up with how Lion detects that the monitor should be reenabled, and synergy is even more affected by that decision.

Issues even after updating to build 14.3.A.0.757

List of problems that I am still facing with my Z1 Compact..
1. Walkman widget does not work in lockscreen 8 out of 10 times at least, if not more.
2. Notification sounds still cracks, though the ringer issue appears to be solved.
3. The back key never functions while "IN A CALL". Also, if I try to type something while "IN A CALL" the keyboard never appears no matter how many times I tap on the typing panel.
If this is the standard of your development, then, unfortunately, competing with the likes of IPHONE 5S shall always be a dream.
And as a consumer, spending 35K over a phone shall compel a user to atleast expect the basic functionalities to work properly.
But may be. SONY INDIA does not care about it's customers!! At least both the KITKAT 4.4.2 builds make me feel this.
I have always been a SONY ERICSSON/SONY user since 2004 but this phone is causing me **bleep** lot of troubles.
Guys, my post is sincerely directed towards SONY developers/testers/othersonyexecutives.
I am definitely looking forward to a reply from SONY regarding these above mentioned issues which still persist even after the second update.
P.S. Please do not ask me to repair using PCC or SUS. They didn't work. I cannot do them again and again!!

I have a black Xperia Z1 Compact with a build date of 14W04 (week 4 of 2014) which I have just updated for the first time since purchasing SIM-free from Phones4U, using Sony PC Companion on my Windows 7 PC, to Android 4.4.2 and Sony Software 14.3.A.0.757 and fortunately (and very untypically) I do not seem to have experienced any of the reported problems at all. I have just taken several flash photos in the pitch dark indoors using Superior Auto mode and I cannot identify any flash bleed or uneven flash illumination as reported in other topics and threads. I am really very surprised, because from my past experience with technology in general, if there is a possible potential technical problem around, I always seem to be one of the unlucky people who it affects! However, I do agree that the overall photo quality does not seem to be nearly as good as would be expected from the apparently impressive documented camera specification and is really quite dissapointing! I wondered if a third-party Android camera app would improve photographic performance, or if the obvious shortcomings are too deeply associated with the camera lens and/or the Sony firmware?

Skype mic issues even after crating dummy ALSA

hello everyone i'm having a "growling" issue with my head set even after setting up a dummy alsa as mention in this wike page: Monster/low-octave "growling" distortion over mic after trying the stuff on that wiki I had a look here in the forums and found this post Skype + microphone = growling[SOLVED] but I'm still getting the feedback on the other side of the call also if I use the dummy alsa skype crashes below is the output of amixer
Simple mixer control 'Master',0
Capabilities: pvolume pswitch pswitch-joined penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 63
Mono:
Front Left: Playback 56 [89%] [-7.50dB] [on]
Front Right: Playback 56 [89%] [-7.50dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 28 [90%] [7.50dB] [on]
Front Right: Playback 28 [90%] [7.50dB] [on]
Simple mixer control 'Mic',0
Capabilities: cswitch cswitch-joined cswitch-exclusive penum
Capture exclusive group: 0
Capture channels: Mono
Mono: Capture [on]
Simple mixer control 'Mic Boost',0
Capabilities: volume penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 2 [67%] [20.00dB]
Front Right: 2 [67%] [20.00dB]
Simple mixer control 'Beep',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 15
Mono: Playback 10 [67%] [-15.00dB] [on]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 15
Front Left: Capture 11 [73%] [16.50dB] [on]
Front Right: Capture 11 [73%] [16.50dB] [on]
Simple mixer control 'Mix',0
Capabilities: cswitch cswitch-joined cswitch-exclusive penum
Capture exclusive group: 0
Capture channels: Mono
Mono: Capture [off]
Simple mixer control 'Digital',0
Capabilities: cvolume penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 120
Front Left: Capture 116 [97%] [28.00dB]
Front Right: Capture 116 [97%] [28.00dB]
Simple mixer control 'Docking-Station',0
Capabilities: cswitch cswitch-joined cswitch-exclusive penum
Capture exclusive group: 0
Capture channels: Mono
Mono: Capture [off]
Simple mixer control 'Internal Mic Boost',0
Capabilities: volume penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 3 [100%] [30.00dB]
Front Right: 3 [100%] [30.00dB]
i know is not the headset because I test it on my suse box and it work fain
hope someone can help me thank you in advances :-)
Last edited by gozes (2012-01-22 02:45:02)

hello everyone i'm having a "growling" issue with my head set even after setting up a dummy alsa as mention in this wike page: Monster/low-octave "growling" distortion over mic after trying the stuff on that wiki I had a look here in the forums and found this post Skype + microphone = growling[SOLVED] but I'm still getting the feedback on the other side of the call also if I use the dummy alsa skype crashes below is the output of amixer
Simple mixer control 'Master',0
Capabilities: pvolume pswitch pswitch-joined penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 63
Mono:
Front Left: Playback 56 [89%] [-7.50dB] [on]
Front Right: Playback 56 [89%] [-7.50dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 28 [90%] [7.50dB] [on]
Front Right: Playback 28 [90%] [7.50dB] [on]
Simple mixer control 'Mic',0
Capabilities: cswitch cswitch-joined cswitch-exclusive penum
Capture exclusive group: 0
Capture channels: Mono
Mono: Capture [on]
Simple mixer control 'Mic Boost',0
Capabilities: volume penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 2 [67%] [20.00dB]
Front Right: 2 [67%] [20.00dB]
Simple mixer control 'Beep',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 15
Mono: Playback 10 [67%] [-15.00dB] [on]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 15
Front Left: Capture 11 [73%] [16.50dB] [on]
Front Right: Capture 11 [73%] [16.50dB] [on]
Simple mixer control 'Mix',0
Capabilities: cswitch cswitch-joined cswitch-exclusive penum
Capture exclusive group: 0
Capture channels: Mono
Mono: Capture [off]
Simple mixer control 'Digital',0
Capabilities: cvolume penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 120
Front Left: Capture 116 [97%] [28.00dB]
Front Right: Capture 116 [97%] [28.00dB]
Simple mixer control 'Docking-Station',0
Capabilities: cswitch cswitch-joined cswitch-exclusive penum
Capture exclusive group: 0
Capture channels: Mono
Mono: Capture [off]
Simple mixer control 'Internal Mic Boost',0
Capabilities: volume penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 3 [100%] [30.00dB]
Front Right: 3 [100%] [30.00dB]
i know is not the headset because I test it on my suse box and it work fain
hope someone can help me thank you in advances :-)
Last edited by gozes (2012-01-22 02:45:02)

Visualisation issues even after changing gfx.direct2d.disabled to be true

Similar Messages

Maybe you are looking for