Visualizer issues in itunes 8.0.2

i just updated my itunes and suddenly there's a visualizer problem. the new visualizer and the old both show up in view > visualizer. however, only the "classic" version works. whenever i attempt to use the new one, nothing happens. at all.
help? please?

Use iTunes to restore your iOS device to factory settings

Similar Messages

Adding new Visualizer(s) to iTunes for Windows (Vista/7 64-bit)

I was actually kinda curious, not really a technical question, but are there ways to add other visualizers into iTunes? I ask this in particular, as I have worked with Macs before, and I fell in love with the Jelly visualizer from 10.5, and would love to have that same one running on Windows Vista. Any suggestions as to where other visualizers can be obtained, or how to port one over from Mac to PC?

That version is quite old now, though its fine if you don't have a device that requires a newer version for syncing or want to use the latest features. Should you want to bring things up to date howver, and have problems updating, then for general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Issues with itunes on start-up

I'm not able to use any of the functions of iTunes anymore. Since the last couple updates. When I start iTunes it takes a long time for the library to load(understandable-I have a large music library stored on an external hard drive) Once the library has finally loaded and iTunes opens, I just get the colored pinwheel of death. Any ideas?

Hey david472,
Thanks for the question. I understand you are experiencing issues with iTunes for Mac. To isolate and troubleshoot this issue, try opening iTunes in safe mode:
iTunes: Troubleshooting issues with third-party iTunes plug-ins
http://support.apple.com/kb/TS3430
There are several ways in which an add-on can cause iTunes to act erratically, such as those listed below:
- Loss of iTunes functionality, such as the Visualizer.
- Distortion or irregularity in the iTunes interface.
- Slow performance.
- iTunes won't open or quits unexpectedly.
- You see an alert while syncing stating "... cannot be synced. A duplicate file name was specified."
If you notice any of the above symptoms or other unusual behavior, you can disable any plug-ins not manufactured by Apple by opening iTunes in Safe Mode. This is done by holding down the Option and Command keys (on Mac OS X) or holding down the Shift and Control keys (on Windows) while opening iTunes. If performed correctly, you should see the following dialog before iTunes finishes starting up:
Thanks,
Matt M.

Issues with iTunes Match on iPhone

I am having some frustrating issues with iTunes Match and my iPhone 4 iOS 5.
1) When using cellular data (3G), the songs simply do not play from the music app. It works fine when connected to wifi.
Under settings, cellular data has been enabled for use in the music app.
2) iTunes match constantly switches off spontaneously on iPhone. I need to go back to the settings to enable it every single time I use the app.
I feel that iTunes Match was a total waste of money, considering the only reason I invested in it was to have my library accessible from my iPhone.
Any help would be much appreciated!

iTunes match doesn't work like that and if you don't like it then your best option is to turn it off and go back to syncing. However if you make sure that your device has a good Wi-Fi connection, re-downloading all your content shouldn't really be a big issue.

Issues with iTunes Media Folder resetting to default location

This is my 1st post to the Apple Support Community (the problem I have is with iTunes, but I believe it also has to do with the way OS X Lion is setup and the way Networked Drives are mounted in it) ...so I hope I've posted this to the correct place. Thank you in advance for any help I'm going to get here. I have no expirience with Mac OS X's (coming from a Windows background) so please bear with me, but I am a S/W Tester by trade so I'd like to think I'm resonably IT literate.
ISSUE:
I have a problem with iTunes and my Media Folder resetting constantly - my Setup is a MacBook Air, with an Apple Time Capsule 2TB which is providing my Wifi Network.
I want to setup iTunes so that it will permenatly point to my Data Folder on the Apple Time Capsule, so that when I download purchases, synch iPhones, or rip Music it will end up on the Apple Time Capsule and not on the MacBook Air's SDD Drive
I though I had managed to do this, but after I shut down the MacBook Air, and then logged back in to rip some music, iTunes had repointed to the MacBook Air's SDD, and all the CD's i ripped were saved there instead of the Apple Time Capsule. So far I have done the following;
STEPS CARRIED OUT SO FAR:
1) Connected the MacBook Air to the Wifi Network provided by the Apple Time Capsule - I can see the Time Capsule in the Finder app.
2) Gone to GO MENU > LOCATE SERVERS and selected the top level DATA FOLDER on the Apple Time Capsule....I believe that I've managed to create an ALIAS (Shortcut?) that points to this, and it's on my Desktop.
3) Next I went to SETTINGS > USERS > and made sure that ALIAS (Shorcut?) to the DATA FOLDER on the Apple Time Capsule is always loaded up on startup for my UserID
4) Next, I found my iTunes folder, and MOVED it from the MacBook Air SDD to the Apple Time Capsule's HDD over the Wifi Network.
5) I then went to ITUNES PREFERENCES and changed the MEDIA FOLDER it pointed to, from the MacBook Air's SDD to the one on the Apple Time Capsule.
6) Then I logged out and shut down the MacBook Air.
7) I powered on the Macbook Air, and logged in, then ripped some music - I then found that iTunes had created a new iTunes Folder for my User on the MacBooks SDD and all the CD's I ripped had been saved there. Also under the ITUNES PREFERENCES menu, it looks like iTunes had reset the location of the MEDIA FOLDER...
I don't know if this is an issue with iTunes or not - I'm assuming it's a setup issue on my part, and that maybe I haven't created a permenant link to the Apple Time Capsule as I thought I had. If it helps I was attempting to do something similar to whats described in this YouTube video; http://www.youtube.com/watch?v=mA399lEXRTE
Thanks again for any help
Regards
Codename21

Codename21 wrote:
4) Next, I found my iTunes folder, and MOVED it from the MacBook Air SDD to the Apple Time Capsule's HDD over the Wifi Network.
if you really moved your entire iTunes folder, the next step needs to be launching iTunes while holding the option (⌥) key, clicking on choose library at the prompt, and selecting the iTunes folder you moved to the TC.
as for auto-mounting the TC's disk on startup, you might find this discussion interesting.

Issues with itunes 10.5 on Windows 7 (32 Bit) When Trying to sync iphone 4S or older

I see a lot of people out there, specifically windows OS owners (xp all the way to 7), having issues with iTunes 10.5. Here are the following issues I've encountered (some may only have one problem, others my have a combo pack of problems).
1. iphone 4S or older won't sync or backup
2. iTunes store won't open
The issue I found after using the diagnostics tool in iTunes (which is useless in identify scripting issues or major communication issues), reviewing the windows event log, and reinstalling all apple software and components, was the fact that my spyware and anti virus software was causing a communication error within apple's software. I use spyware doctor with anti virus. I had to uninstall spyware doctor in order for iTunes 10.5 to work. After that, everything worked well and I did a clean install of spyware doctor.
If the issue still persists, you might have to reset your internet protocol (TCP/IP). You have to run a command prompt as an administrator and enter the following: netsh winsock reset
Visit this Microsoft link for more info about resetting your IP: support.microsoft.com/kb/299357
Finally words: Apple, like all other software companies, continually encounter software glitches and issues because they don't test products correctly before bringing them to market- this has been a reoccurring theme for the last 2-3 years. The most important aspect of using any software should be functionality, efficiency, ease of use, and above all "A Positive End User Experience." Wasn't that Steve Job's mantra? We can all hope that Apple embraces his philosophy and vision for the many years to come. This, above all, is not a great start for Apple moving forward without their true inspirational leader.

Here is what worked for me for both 10.5 and 10.5.1 after hours of frustration with Itunes stopping and shutting down in the middle of a sync or tranferring Apps downloaded on my Ipad2 or Iphone 4:
Start iTunes in iTunes Safe Mode:
1. hold down the Shift and Control key together and click to start iTunes.
2. when you see the iTunes icon in the task bar, click on it.
3. you will get a box that says "iTunes is running in safe mode. Visual plug-ins you have installed have been termporarily disabled." [I don't know what plug-ins I installed but you should clearly see that these so-called visual plug-ins are likely the cause of your issues];
4. click Continue to open iTunes.
You could already have your device connected to your computer or do it after opening iTunes in its safe mode.
Now press your sync button and everything should work fine.
I also disabled Genius in iTunes preferences but I'm not sure if this is one of the issues causing these types of problems.
I hope this works. This may be the workaround for all of us Windows 7 64-bit folks.

I'm having a huge issue with itunes locating my missing files..and it's too many for me to locate 1 by 1..It says I'm missing over 3,00 songs and They are all in my music folder..What can I do to fix this issue?

I'm having a huge issue with itunes locating my missing files..and it's too many for me to locate 1 by 1..It says I'm missing over 3,000 songs and They are all in my music folder..What can I do to fix this issue? I've looked at all the tutorials on youtube and none of it works. I recently got a new computer and I Back-Up all my music and itunes playlist and I import it on my new computer with the new itunes and I go to play a few songs, it says I'm missing them I locate a few but it's still like 3,000 missing and again they are all on the computer and in one folder..Please Help !

I did that and nothing changed half my songs still have examination marks beside them
I also just tried dragging my folder of music int he playlist and it duplicated all of my songs? My playlist was at 5k now it's at 10k becuz of 3 duplicates of songs. Is there a way to delete multiple duplicate files?

How do I get rid of lip-sync issues with iTunes 10.2.2.12?

Hi Everyone.
Firstly, a very Happy Easter!
I'm having lip-sync issues with iTunes playback on my PC. The video is largely smooth with the occaisional choppiness when the CPU is made to work hard. (Playback on my iPod Touch is fine).
The system stats for my PC are at the bottom of the post.
The sound is produced through a Creative Live Sound Blaster Live! 5.1 card.
Video is through a NVIDIA Geforce 6200 with 512Mb of RAM. (All video and audio drivers are up to date).
The physical set-up is that I have iTunes installed on the C drive and my media installed on an external USB hard-drive.This isn't just a problem with 10.2.2.12 - it's been there for the last few updates.
I suppose my main questions are:
Should iTunes and my media be on the same drive? (Which would mean the external drive as I'm short on space on the C drive).
Is there some combination of settings in QuickTime that will solve this? (I've tried different combinations, but it doesn't really help).
Is the spec (below) of my PC causing any issues.
Here's an Easter Egg for anyone able to help!!
All the best
BandAidUK.
System Information
Time of this report: 4/24/2011, 10:13:44
Machine name: DEREK
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.101209-1647)
Language: English (Regional Setting: English)
System Manufacturer: Dell Computer Corporation
System Model: Dimension 8300
BIOS: Phoenix ROM BIOS PLUS Version 1.10 A07
Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz
Memory: 3326MB RAM
Page File: 1273MB used, 3941MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.5512 32bit Unicode
Display Devices
        Card name: NVIDIA GeForce 6200
     Manufacturer: NVIDIA
        Chip type: GeForce 6200
         DAC type: Integrated RAMDAC
       Device Key: Enum\PCI\VEN_10DE&DEV_0221&SUBSYS_02F3196E&REV_A1
   Display Memory: 512.0 MB
     Current Mode: 1280 x 1024 (32 bit) (60Hz)
          Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
      Driver Name: nv4_disp.dll
   Driver Version: 6.14.0012.6099 (English)
      DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 10/22/2010 07:23:24, 6359552 bytes
      WHQL Logo'd: Yes
WHQL Date Stamp: n/a
              VDD: n/a
         Mini VDD: nv4_mini.sys
    Mini VDD Date: 10/22/2010 07:23:24, 9623680 bytes
Device Identifier: {D7B71E3E-4161-11CF-0D6D-FF2200C2CB35}
        Vendor ID: 0x10DE
        Device ID: 0x0221
        SubSys ID: 0x02F3196E
      Revision ID: 0x00A1
      Revision ID: 0x00A1
      Video Accel: ModeMPEG2_C ModeMPEG2_D ModeWMV9_B ModeWMV9_A
Deinterlace Caps: {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                   {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                   {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                   {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                   {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                   {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                   {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                   {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
         Registry: OK
     DDraw Status: Enabled
       D3D Status: Enabled
       AGP Status: Enabled
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run
Sound Devices
            Description: Creative SB Live! Series
Default Sound Playback: Yes
Default Voice Playback: Yes
            Hardware ID: PCI\VEN_1102&DEV_0006&SUBSYS_10031102&REV_00
        Manufacturer ID: 1
             Product ID: 100
                   Type: WDM
            Driver Name: P16X.sys
         Driver Version: 5.12.0001.0129 (English)
      Driver Attributes: Final Retail
            WHQL Logo'd: Yes
          Date and Size: 8/14/2003 16:58:12, 1296384 bytes
            Other Files:
        Driver Provider: Creative Technology Ltd.
         HW Accel Level: Full
              Cap Flags: 0xF5F
    Min/Max Sample Rate: 8000, 96000
Static/Strm HW Mix Bufs: 64, 63
Static/Strm HW 3D Bufs: 64, 63
              HW Memory: 0
       Voice Management: No
EAX(tm) 2.0 Listen/Src: Yes, Yes
   I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
               Registry: OK
      Sound Test Result: Not run
            Description: SoundMAX Digital Audio
Default Sound Playback: No
Default Voice Playback: No
            Hardware ID: PCI\VEN_8086&DEV_24D5&SUBSYS_01571028&REV_02
        Manufacturer ID: 65535
             Product ID: 65535
                   Type: WDM
            Driver Name: smwdm.sys
         Driver Version: 5.12.0001.7000 (English)
      Driver Attributes: Final Retail
            WHQL Logo'd: Yes
          Date and Size: 3/22/2005 11:08:40, 260224 bytes
            Other Files:
        Driver Provider: Analog Devices
         HW Accel Level: Full
              Cap Flags: 0xF5F
    Min/Max Sample Rate: 100, 192000
Static/Strm HW Mix Bufs: 33, 32
Static/Strm HW 3D Bufs: 33, 32
              HW Memory: 0
       Voice Management: Yes
EAX(tm) 2.0 Listen/Src: Yes, Yes
   I3DL2(tm) Listen/Src: Yes, Yes
Sensaura(tm) ZoomFX(tm): Yes
               Registry: OK
      Sound Test Result: Not run
Sound Capture Devices
            Description: Creative SB Live! Series
Default Sound Capture: Yes
Default Voice Capture: Yes
            Driver Name: P16X.sys
         Driver Version: 5.12.0001.0129 (English)
      Driver Attributes: Final Retail
          Date and Size: 8/14/2003 16:58:12, 1296384 bytes
              Cap Flags: 0x41
           Format Flags: 0xFFF
            Description: Hauppauge WinTV 88x Audio Capture
Default Sound Capture: No
Default Voice Capture: No
            Driver Name: hcw88aud.sys
         Driver Version: 2.125.28070.0000 (English)
      Driver Attributes: Final Retail
          Date and Size: 3/12/2010 09:47:58, 13440 bytes
              Cap Flags: 0x41
           Format Flags: 0xCC0
            Description: SoundMAX Digital Audio
Default Sound Capture: No
Default Voice Capture: No
            Driver Name: smwdm.sys
         Driver Version: 5.12.0001.7000 (English)
      Driver Attributes: Final Retail
          Date and Size: 3/22/2005 11:08:40, 260224 bytes
              Cap Flags: 0x41
           Format Flags: 0xCCC
DirectMusic
        DLS Path: C:\WINDOWS\SYSTEM32\drivers\GM.DLS
     DLS Version: 1.00.0016.0002
    Acceleration: n/a
           Ports: Microsoft Synthesizer, Software (Not Kernel Mode), Output, DLS, Internal, Default Port
                  Creative SB Live! Series, Software (Kernel Mode), Output, DLS, Internal
                  SoundMAX Digital Audio, Software (Kernel Mode), Output, DLS, Internal
                  Microsoft MIDI Mapper [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
                  Creative SB Live! Synthesizer [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
                  Creative SB Live! External MIDI [Emulated], Hardware (Not Kernel Mode), Output, No DLS, External
                  Microsoft GS Wavetable SW Synth [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
                  Creative SB Live! External MIDI [Emulated], Hardware (Not Kernel Mode), Input, No DLS, External
        Registry: OK
     Test Result: Not run

Select *List view* instead of *Album list view*. These are in the View menu or the boxes next to Search, on the right top of iTunes.
and the column next to it with a number in it that I have absolutely no idea what it's for. I want those two columns OUT.
In List view, you can turn off every column (in menu View > View options) except track name.

Updating Issue with iTunes 7.0.1.8

A few weeks ago I made the jump to the newly released iTunes 7.0. I had a slew of issues with this update (which by the way Apple has still not provided a working solution for), which I addressed in detail in this post: http://discussions.apple.com/thread.jspa?messageID=3170496#3170496
Today I updated to the new iTunes 7.0.1.8. There were no issues during the installation itself, however afterwards is a completely different story. When I attempt to open iTunes, I receive the following error message: "This action is only valid for products that are currently installed."
My first thought was to see if Quicktime is working normally. It is. No problem there. I thought perhaps I should try repairing the installation. So I went to Settings > Control Panel > Add/Remove Software > iTunes. I attempted to use the 'repair' option. This did not work at all.
At this point I restarted my computer and uninstalled iTunes. I restarted once again and reinstalled. When the installation had finished I received the prompt, "would you like to run iTunes after the installation is completed?" I clicked 'yes.' iTunes opened, no problem.
I closed iTunes and attempted to reopen it normally. It would not open, instead giving me the same message: "This action is only valid for products that are currently installed."
I thought the previous issues with iTunes not recognizing my iPod were bad enough but now I can't even open iTunes at all. This is absolutely unacceptable on Apple's part. It was bad enough that they released 7.0 with all its bugs, but at this point they should have their act together. Instead the problems are getting worse.
Dell Dimension 4600 Windows XP Pro

Please let me know if I can get rid of this feature.
You sure can.
iTunes View menu > Hide MiniStore will do the trick.

I have not had any issue with Itunes on my PC until recently. Every now and then my Itunes library appears on my screen? I have not clicked the itunes icon beforehand nor plugged in my Ipod Touch? Why does ths happen please. I have windows XPPOdany ic

I have not had any issue with Itunes on my PC until very recently. Every now and then my Itunes library appears on my screen? I have not clicked the itunes icon beforehand nor plugged in my Ipod Touch? Why does this happen please as it is driving me crazy!.

What's the precise text of the message, please? (There's a couple of different ones I can think of that you might be getting.)

Having issues installing iTunes 11.1.4 for Windows 7 (64 bit).

Issues installing iTunes 11.1.4 for Windows 7 (64 bit).This install clobbered my previous version of iTunes. Error message is "service Apple Mobile Device failed to start". Cannot start the service manually even though I am the administrator of the machine. There is obviously some conflict that was recently introduced by a Windows update or in the Apple installation. I have tried removing iTunes and the AMDS (the Apple mobile device service) and reinstalling with the same error message.
Thanks for any suggestions you can provide!
Marilyn

Hey there Marylin,
It sounds like you are unable to start iTunes due to this error message even after uninstalling the iTunes application and the Apple Mobile device. I would recommend uninstalling not just those 2 applications but iTunes and ALL its associated applications with the following article:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
Thank you for using Apple Support Communities.
Regards,
Sterling

Serious Sync issues between iTunes 8.0.2 and AppleTV 2.3

Please Help,
Everything was just wonderful until several weeks back when the AppleTV started having sync issues that seem to have degraded into oblivion. Rebooted everything, checked all software loads, tried many of the suggestions (no blocking network / firewall issues) and have even tried adding redundant port allows for any and all ports I could find going in / out of Apple TV. But to no avail there seems to be a bug that got introduced somewhere with the sync mechanisms.
The Apple TV can purchase movies, download them fast to start playing, view youtube videos just fine and play all of the media great, So can my Mac and all media / iTunes functions work well it even syncs with my iPhone / iPods well.
However... The only way I can get the AppleTV to sync is to reboot it, then it will sync some, iTunes will just get to a forever syncing with Apple TV state (which you have to stop), reboot AppleTV again, it will sync some more, until it stops, iTunes is stuck syncing forever with AppleTV again, repeat and rinse about 4 more times and you have it all synced.
If there isn't anything to sync when AppleTV boots the Sync in iTunes just spins for ever. I actually left it for 4 days just to see if it was actually doing anything. Minimal Network IO and of course it never finished.
If I stop the Sync with Apple TV in iTunes and then try to reinitiate it from iTunes I get the 3986 port error (which is bogus) unless there is some hidden setting somewhere in the OS that I can't find. And if there was a problem then why would it start and run when I boot the Apple TV.
It just seems that all of a sudden things started going wrong with Sync with no real change other than 'software updates' .
The only thing I haven't tried is to do a factory reset on the AppleTV which from what I have read doesn't really solve anything.
So, please someone from Apple or someone with some detailed technical experience provide some guidance on whether there is a bug that got introduced, version issues between iTunes/AppleTV, or something else going that I haven't been able to figure out over the last 2 weeks.
The only other unique things that may be different is that I have my iTunes library on an external drive (not on the internal drive). Does this many any difference?
Thank You in advance to anyone that can help me get to the bottom of these issues. This started happening when I was totally sold on AppleTV and about to buy a second one.
mmilford

And it's good to know I'm not the only one with the problem too! I just cannot sync stuff from Mac to Apple TV without it locking up. It actually seems to lock the wifi also, meaning I have to quit iTunes, turn off the wifi and then turn it back on again. But as soon as I open iTunes, the same problem again...
I've tried everything I can think of, searched all help articles, but cannot sort out this somewhat annoying problem.
Message was edited by: Lee Nixon

Having issues with iTunes 11.1.5 on Windows 8.1

Ever since I've refreshed my windows computer two weeks ago. I am having issues with iTunes 11.1.5. For some reason I can access the iTunes Store, but most of the time when I do something internet related on iTunes, the app is either stuck on checking for downloads or when trying to sign in. I am trying to update all my apps but only a couple out of 30 actually start downloading but they keep getting stuck at "processing file". I have used another computer with Windows 8.1 with the same version of iTunes and its downloading app updates fine.

it works at first then after trying to update a few apps (the third one this time) iTunes again stops working and gives me the 8008 error.
Okay ... let's try seeing if that one is the root cause of the errors.
Try the "Error -50," "-5000," "8003," "8008," or "-42023" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting
Does that calm down the 8008s?

HT1926 iTunes will not install on my computer (Windows 8) and i tried everything in "Issues installing iTunes or QuickTime for Windows" but nothing worked. any help?

iTunes will not install on my computer (Windows 8) and i tried everything in "Issues installing iTunes or QuickTime for Windows" but nothing worked. any help?

Many thanks.
Error 7 (Windows error 127)
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

HT201210 The iPod "iPod" could not be restored. An unknown error occurred (1).This is my Ipod 32 GB, which is out of warranty and is 1G-A1213 and had gone kaput, after having issues with iTunes Software as it was not able to run Music on my IPod when conn

The iPod "iPod" could not be restored. An unknown error occurred (1).This is my Ipod 32 GB, which is out of warranty and is 1G-A1213 and had gone kaput, after having issues with iTunes Software as it was not able to run Music on my IPod when connected.
I have wasted my precious 2 days and nights and am lost all my hope...APPEAL TO ALL GEEKS TO RESOLVE MY ISSUE ON HUMANITARIAN GROUNDS ATLEAST WITH SOME VALID TIME OF YOURS.
All mails can be sent to [email protected]
Restore of Ipod back up is present...but is not getting restored due to some iTunes issue with playing my music files.It says restoring and extracts but failes in 1 min with the said error.

Other users and reported error 1 but I have not seen a solution.
Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Visualizer issues in itunes 8.0.2

Similar Messages

Maybe you are looking for