Visualizing SAP XI routing configuration across the system landscape

Hi Experts
Iam facing some challenges in visualizing SAP XI routing configuration across the system landscape (Development, Quality, Production). Basically routing is based on a field (technical target system). Depending on the environment we have different target systems (different Mainframe DB that represent the same target system) configured.
Any word/excel/ppt/pdf templates or any comments that could help visualizing routing would be highly appreciated.
Thanks! Santosh

Hi Santhosh,
If you are worrieed about how your Business Systems will change when you move from Dev to QA to PROD for the Configuration in your ID, then the answer is simple.
You can create transport target for your Business System and so when you migrate the ID objects from dev to Qa and so on, the business Systems will be automatically replaced.
Take a look at this blog,
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Regards,
Bhavesh

Similar Messages

Managing Consumer Proxies and related configuration in the System Landscape

Hi,
I have successfully created and tested the Consumer proxy in our development server.
Scenario background: A Java Web Service has been developed and deployed on the Portal server which i am consuming in ECC6.0 in ABAP.
We would soon need to move it through the system landscape concerning which i have the following queries:
1. The Consumer Proxy was created with the WSDL URL of the Development Portal server. I checked the Consumer proxy and did not find any signature of the WSDL URL in the Consumer proxy object generated. Can we therefore transport this consumer proxy to QA/Production without any issues?
2. The Logical port configuration - What's the standard used in its maintenance across the landscape? Will we need to manually do it in every system? Can this also be made generic and transported across the landscape?
regards
Nitesh

Hi,
Logical port you can create in two ways.
One using LPCONFIG and other is using the SOAMANAGEr.
When you create a logical port using LPCONFIG you get the Customizing transport request which is client dependent. you can move this to any land scape. Only the thing we need to do change in the port is just accessing URL.
But the latest transaction SOAMANAGER does't give any transport number. I guess there should be a way for this too. If not then there is only one choice left is configure on each client.
Thanks,
Kishore.

STMS Route configuration in Three system Landscape with DEV,QA and PRD

Hi
We have Three system landscape.i.e DEV,Quality and PRD
Before Somebody configured the STMS by selecting standard two system land scape ( Dev and QAS)
We Have Installed Production Server And Added into Existing STMS Configuration
Now Three Systems Showing, In Import Overviw Screen
How Can I Create Route Between Three systems
What I am Asking Is Without Delet Old Roots
Can i Create it are Not
regards
NSN

Refer these links:
http://help.sap.com/saphelp_erp2005/helpdata/en/1c/2ddc0901db11d284870000e8a57770/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/44/b4a0137acc11d1899e0000e829fbbd/frameset.htm
Regards,
Ravi

First RFC call failed, config not loaded. Check the System landscape configuration.

Dear Experts,
We are getting below error on portal while using the BEX query in BI system.
Error:
BEx Web Application
Error: First RFC call failed, config not loaded. Check the System landscape configuration.
Exception occurred while processing the current request; this exception cannot be handled by the application or framework
Failed to process request; contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page
We are sorry for the inconvenience.
As the ITS & WEB AS connection tests go successful on object created for BI system in portal.
Kindly suggest me on this issue..
Thanks,
Bharath.

Hi Bharath,
Please go through the below SAP Note and let me know if this helps.
1903392 - Error: First RFC call failed, config not loaded
BR,
Anurag

Canteen configuration in the system

Dear Team,
We have canteen facility and for this we want to do the configuration in the system.
For each personnel sub area we have diff rates for breakfast and lunch deductions. Based on the count of the breakfasts and lunch system should calculate the amount for each personnel area and that need to be deducted from employee salary.
How to configure this in the system, Can anybody please suggest how to address this?
Kind Regards
Nag

Hi Nag,
My Approach is like this.
1. Create a Z Table with fields
       1. Personnel Area
       2. Break Fast Rate
       3. Lunch Rate.
2. Create an infotype with fields
        1. No. Of Breakfasts
        2. No. Of Lunches
     and this will be maintained once in payroll period.
    Important thing here is while maintaining This infotype, System should calculate the total amount for breakfasts and lunches and should update 0015 with deduction wagetype. ( Create Deduction wagetype for this).
3. Thats it, While running payroll that particular amount will be deducted from his salary.
You need an ABAPer to meet this requirement.
Hope this helps.
Pradeep.

You do not have permission to view the System Landscape Directory.

Hello there,
When I accessed my SLD from portal, it took me to the page but kept saying:
- You do not have permission to view the System Landscape Directory. Minimum required: UME role with permission com.sap.lcr.LcrUser and J2EE role LcrUser. See the SLD Post-Installation Guide for details
- SLD not configured; configure the SLD in Administration first.
I searched on these forums for the above error. Got some results, but nothing really substantial that has helped/fixed my problem.
I also read a bit on SLD from the pdf file named: System Landscape
Directory of SAP NetWeaver 2004s
I also worked on the security roles and actions to individual
users or user groups like for ex: the above pdf file advised I map the security roles from Visual Administrator, to the created roles in the portal. I've done that too. Like create a user group: 'SAP_SLD_ADMINISTRATOR' and create a user role corresponding to it, which would be: 'LcrAdministrator'
Then, I went to visual administrator, and clicked on 'Assign User Groups to Roles'
Even after this, I tried to access the SLD from portal: It is still giving me the same error I mentioned above in bold italics.
Can somebody please help me how to fix this issue?
Thanks
Dino.

Graham:
Thank you very much for making the effort to reply to my query.
But, it still hasnt solved my problem yet.. for some reason even though I followed your instructions and did what you advised.
I have attached a screenshot of my Visual Administrator screen that you advised me to modify/change.
Here it is: http://img166.imageshack.us/img166/2259/screenshot002co1.jpg
After I made the changes, I restarted the J2EE server and went to my portal SLD page: [http://org-x:50000/sld]
Tried authenticating usernames: LcrAdministrator and Administrator.
Both attempts resulted in the same error show below:
- You do not have permission to view the System Landscape Directory. Minimum required: UME role with permission com.sap.lcr.LcrUser and J2EE role LcrUser. See the SLD Post-Installation Guide for details
- SLD not configured; configure the SLD in Administration first.
I am wondering, if you would have another workaround regarding this issue, can you please let me know?
Thanks
Dino.

No system in the system landscape exports transport requests

Hi gurus,
We are trying to implement the Change Request Management scenario in
Solution Manager 4.0 SP12 in a POC.
The TMS are created with Solution Manager as Controller and with the settings are correct.
We have created a Maintenance Project with the following landscape :
system1 - Client 100 as Development System - Type of Rol "Source System"
system2 - Client 200 as Quality System - Type of Rol "Target System"
system2 - Client 100 as Production System - Type of Rol "Production System"
In the Change Request tab, when we check "Activate Change Request Management" checkbox, the following error is shown:
"System system2-100 is to be changed in a Solution Manager project, but no
system in the system landscape exports transport requests which are
imported into this system."
What is happening? Any idea??
Thanks

The reason may be, that your "POC" is not valid due to the fact, that you use "clients" and not "systems" to transport
What you can try to verify that is - take out the QA client/system out of the transport route and try then to activate just with DEV --> PRD.
We wanted to setup something similar in the past and TMS failed to get configured properly - due to exact that reason.
Markus

Warning: Problems occurred during synchronization of the system landscape

Hello
I have created systems in system landscape, TMS is working fine, all the configuration steps are completed successfully.
am working in Solution Manager 4, in project change -SOLAR_PROJECT_ADMIN - Project Administration - in 'System Landscape' tab  Change request and when I activate change request management I am getting following messages:
1. Warning: Problems occurred during synchronization of the system landscape
2. The project is not released. Hence cycle can not be created.
Its bit urgent as I m in middle of this activity, please assist me on the same
Thanks
Sharmishtha

Hello Jason & Prakhar
Thanks for your quick response. I am basis person, and configuring this change request management for one of the project.
Jason:
Will you please check with your basis person about these settings and let me know the same. I have set the settings as follows
C= Development (source system)
T = Quality
P = Production
Prakhar:
I have checked with all RFC connections are working fine, authorizations are also properly given.
I didnt get your point No correctly defined maintenance project exists, I have already created project in project administration transaction, assigned the system landscape, I have activated project IMG in IMG Project and then going in change request tab to activate the change request management, where its giving me above error.
More over, as you have mentioned I am getting following message in SLG1:
Project CHARM_GBW not found in the project administration table
This is asking me to do following things:
Synchronize the project in Change Manager with the Solution Manager. Call the Solution Manager with the transaction SOLAR_PROJECT_ADMIN, and go to the 'System Landscape' tab, and then the 'Project Cycle' tab. Select the 'Change Request Management' field, and choose 'Refresh'. Project CHARM_GBW should then be available.
Where do I have to make entry for this? I can see the entry in /TMWFLOW/PROJMAP table too. I dont know what more I need to do for this.
Problem is I cant see Project Cycle tab in System Landscape. Prakhar, frankly I am not able to find any step wise document on this part. So will you please help me with some documents on this? I am from technical side thus there is bit difficulty to understand this scenario from functional view.
I will be grateful for your help,
Thanks
Sharmishtha

APO - Basic settings for setting up the system landscape

Hi,
I have a, hopefully small, issue regarding setting up the system landscape for our APO - R/3 environment.
In our test system in R/3 I need to specify the APO release, which is not a problem. The issue I have in R/3 is when I try to save the new setting. The system asks for a workbench request even if the test system has been "opened" by the Basis resource.
I would like to avoid creating a workbench request as we are using an external tool ( HP PPM ) for transport management and I believe I will get into trouble since this workbench request should not be transported further into our production environment. As I have understood from our APO experts the settings must be maintained per R/3 system (development - test/quality - production) as it is pointing to corresponding systems in the APO landscape.
The question is, does anyone know how we can maintain these settings without any workbench request being created?
This is perhaps not a APO question, but I'm not sure in what other forum I should post it.
Thanks for any feedback
Br,
Lars

Lars,
I have difficulty envisioning any situation when you would wish to make any transportable change (workbench or otherwise) in a test system. The normal path would be to transport the change from the dev system into the test system. I am unfamiliar with the third party software (HP PPM) about which you speak. However, the standard controls currently used in your transport process (third party or otherwise) should limit which transports do and which transports do not get moved into your prod system.
I can think of several ways to approach this problem. I think you should consult with your supervisor before attempting such changes, to ensure that you are complying with all policies and procedures that exist for your company. In my company, this type of exception would require creation of special change management docs, and appropriate signoffs by management.
You are right this is not an APO question, it is a Basis question. For advice on the technical aspect of your question, try one of the Basis forums. Pick the one that is for the DBM you are using.
http://forums.sdn.sap.com/index.jspa?categoryID=1#34
Best Regards,
DB49

Can't find an SC at the CMS after creating it at the System Landscape

Hello,
I am trying to implement SAP's Scenario 2 of the NWDI located at this URL:
http://help.sap.com/saphelp_nw04/helpdata/en/71/384c4005a99523e10000000a1550b0/frameset.htm
At the moment I am at the preparation section.
I have finished succefully the
"Creating a Software Component in the SLD" part and now I am at the "Creating a Domain and Track in the CMS".
At this part you should *** the SC using the "Add SC..." button. When I click tthis button I see a lot of SC's yet I can't see mine. I tried filering by each one of the parameters and double checked all the parameters of the SC at the System Landscape yet I can't find it.
Any idea why?

Hello Pascal,
I assume you are fereffing to this post installation step:
Register the SLD Server in the SLD
1. On the initial page of SLD, choose System Landscape
->Technical Landscape.
2. In the Technical System Browser, choose New Technical System.
A Technical System Wizard appears.
3. In the Technical System Wizard, choose the option System Landscape Directory and
then Next.
4. On the next page, enter values for:
Web AS Java: The <SID> of this system
Roles: Landscape Server
CIM Server URL: http://<server>:<port>/sld/cimom
Object Server: The name of the object server of this SLD server (see also
Activate the SLD Server)
5. Choose Finish.
I have made this update at the installation process. In any case I have verified that it exists and it does yet I still see only 6.30 versions when I add dependencies to my SC. Please correct me if I'm wrong.

Editing the system landscape

Hello all, I have 3 questions that I am posting separately.
1. Why can I no longer edit the system landscape from the project administration transaction as of release 3.2? And also, soes anyone have a clear explanation of how a Solution relates to a Project? I have been able to deduce a bit of this from the functions and behavior of the landscape transactions(e.g. you can maintain one system landscape for multiple projects), but would like to know what is the official intention of a Solution.

Thanks Juergen,
I see the point you are making, however, I still would prefer to select the logical components directly in the project administration transaction. The way you have to skip around the screens is cumbersome and confusing. If the logical component -> system assigment were done by the system administrator, then the project administrator could just pick the logical component. Anyway, this is the way it is designed...
Do you have any insight into the second part of my question - what a "Solution" is meant to encompass and where it is used? I know the Service Desk uses it as well as the project system landscape.
Regards,
Marcel

Sales Order Stock Configuration across the Supply Chain

Dear Colleagues,
here's my query. This is more related to configuring Make To Order on R/3 Side.
As a Requirement, my client would want that across the supply chain, to trace the stocks relevant for a particular Sales Order. One way I came across was using Sales Order Stock.
The Product Flow Network is like :
Plant > BSR > WH1 > WH2 > Invoicing Point.
(- No Planned Movement Doc in Plant-BSR) > STO(B-W) > InterCo PO(W1-W2) > STO(W2-Inv. Point)
What I would like to know is that using MTO strategy and Sales Order Stock, how can we configure the following scenario?
1. Sales Order is Created with Account Assignment
2. InterCompany STO and InterPlant STO can be created with Account Assignment Category Type 'E' and reference to the Sales Order-Item No.
3. Using STOs at BSR, Propogate the Demand to Plant, create a Planned Order with Account Assignment and Sales Order Reference.
4. Production and subsequent GR to Sales Order Stock at BSR
5. Subsqeuent Deliveries only against the Relevant STOs and GR to Sales Order Stock at all locations in the network.
I would like to highlight that the need for identification of linking SO to Production Order is only from the stage of SKU-production order at the plant to utpo final delivery from the Invoicing plant.
regards,
Sudhir
Edited by: Sudhir Gulati on Jul 23, 2008 12:05 PM

Typically MTO situation is better modeled in PPDS since it does pegging through the network. In SNP we typically do dynamic pegging and hence it will be difficult to link the sales order all the way to production order. Having said that SNP does take into account available resource for planning some of which could have been consumed by MTO orders. This perhaps may not be helpful to your scenario.
As I said dynamic pegging is done with SNP. So when you use SNP in the network, you can basically check the product view to see the supply-demand links. (/sapapo/rrp3) These links are indicative and you should be able to use them for tracing purposes.

No SAP Standard workflow Tasks in the system

Hi All
Currently in our SAP System ( ECC6.0) , there is no standard SAP tasks nor templates are available in any of the clients . How to bring the standard tasks and templates in the system . Is it that we have to import from Client 000? If so , how to do that ?
Appreciate your help in this . Please pass any document or material on this .
Thanks in advance .

How do you know you do not have Template and Task. Probably you have checked with Tcode PFTC.
I think you do not have authorization. After you get no task is in PFTC do a SU53 and ask your security team to provide the authorization.
Thanks
Arghadip

Slow down across the system?

I have Microsoft Office 2004 and about 150gb space on my laptop but everything has slowed down recently. Can anyone suggest a reason? It affects word, the internet, mail - everything.

Hi goslowshazza, and a warm welcome to the forums!
Could be lots of reasons, but I'd get Applejack...
http://www.macupdate.com/info.php/id/15667/applejack
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 6 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files!
Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.

Transport target group and routes setting for 2 system landscape

Hi!
I have 2 system landscape (DEV with 2 Clients, 100 CUST and 200 TEST and PRD with productvie client 100).
Currently I have the standard TMS configuration for 2 systems (with tranport layers/routes ZDEV and SAP) .
Now I have to set up my TMS settings client specific
(Development in DEV 100 and transport to the DE 200 TEST and PRD 100).
I have created tranport target group /B-DEV/ with both target goals:
DEV 200 and PRD 100.
<b>What are the further settings for transport routes?
I assume, I have to delete the existing routes ZDEV and SAP?
what are the next steps? </b>
Thank you very much
regards

Ok, I have in DEV system:
Client 100 (Customizing)
Client 200 (Test) (it can be considered as replacement of QAS-system, because we only have 2 systems)
PRD system
Client 100 (Productive client)
So we would like to set up the transport management system client specific, in order to develop in DEV 100 to test in DEV 200 and to use the transports in PRD 100.
Thank you very for your help
regards

Visualizing SAP XI routing configuration across the system landscape

Similar Messages

Maybe you are looking for