Vital: linking mkpf and j_1iexcdtl
how do i link mkpf and j_1iexcdtl as i want to display Grn no with exbed(basic excise duty)
Hi
The two tables have a join between the below mentioned fields
MKPF-MJAHR to J_1IEXCDT -EXYEAR
Regards
pavan
Similar Messages
-
To link MKPF and BKPF Tables.
Hi Experts,
I basically need to retieve all the accounting documents posted for a particular material document. How is this possible ?
Regards,
SunithaStep 1
GET KEY FIELDS FROM MKPF namely
MKPF-MBLNR
MKPF-MJAHR
Now CONCATENATE these fields into say STR1
SELECT all records from BKPF where
BKPF-AWKEY = STR1
You get the corresponding FI record -
is there any link B/W tables MKPF and BKPF
hii
refer link
Link between Accounting Header (BKPF) amd Goods Reciepts Header (MKPF)
you can do following way too
select MJAHR & MBLNR fields from MKPF table
CONCATENATE these fields into one variable like wa_val.
now use
SELECT * from BKPF where BKPF-AWKEY = wa_val
regards
twinkal -
How to link EKBE and MKPF tables
HI all
plz help me,
how to link EKBE and MKPF tables
thanks
ramesh redddyHI,
EKPO-EBELN = EKKO-EBELN has Purchase Documnet no.
MSEG=MBLNR = MKPF-MBLNR has material document no
Link MSEG-EBELN = EKPO-EBELN ( MSEG purchase prder no and EKPO purhcase document no.)
and you should have to add one more table MSEG which is provide three table.
check this link
EKPO-EBELN = EKKO-EBELN
MSEG-EBELN = EKPO-EBELN
MSEG=MBLNR = MKPF-MBLNR
regards,
PK. -
Link between tables J_1IEXCDTL and BSEG
Hai,
Can someone tell me how I can link the tables J_1IEXCDTL(CIN Table) and BSEG.
Please help.
Thanks in advance
BinooYou could create and ABAP Query infoset and create your tables links there. Or you can create an ABAP dictionary view.
-
I am developing a desktop application in Wpf using MVVM and Entity Frameworks. I have the following tables:
1. Party (PartyId, Name)
2. Case (CaseId, CaseNo)
3. Petitioner (CaseId, PartyId) ............. Link Table
I am completely new to .Net and to begin with I download Microsoft's sample application and
following the pattern I have been successful in creating several tabs. The problem started only when I wanted to implement many-to-many relationship. The sample application has not covered the scenario where there can be a any-to-many relationship. However
with the help of MSDN forum I came to know about a link table and managed to solve entity framework issues pertaining to many-to-many relationship. Here is the screenshot of my application to show you what I have achieved so far.
And now the problem I want the forum to address is how to bind a combo box so that it retrieves Party.Name for the corresponding PartyId in the Link Table and also I want to populate it with Party.Name so that
users can choose one from the dropdown list to add or edit the petitioner.Hello Barry,
Thanks a lot for responding to my query. As I am completely new to .Net and following the pattern of Microsoft's Employee Tracker sample it seems difficult to clearly understand the concept and implement it in a scenario which is different than what is in
the sample available at the link you supplied.
To get the idea of the thing here is my code behind of a view vBoxPetitioner:
<UserControl x:Class="CCIS.View.Case.vBoxPetitioner"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
xmlns:v="clr-namespace:CCIS.View.Case"
xmlns:vm="clr-namespace:CCIS.ViewModel.Case"
mc:Ignorable="d"
d:DesignWidth="300"
d:DesignHeight="200">
<UserControl.Resources>
<DataTemplate DataType="{x:Type vm:vmPetitioner}">
<v:vPetitioner Margin="0,2,0,0" />
</DataTemplate>
</UserControl.Resources>
<Grid>
<HeaderedContentControl>
<HeaderedContentControl.Header>
<StackPanel Orientation="Horizontal" HorizontalAlignment="Right">
<TextBlock Margin="2">
<Hyperlink Command="{Binding Path=AddPetitionerCommand}">Add Petitioner</Hyperlink>
| <Hyperlink Command="{Binding Path=DeletePetitionerCommand}">Delete</Hyperlink>
</TextBlock>
</StackPanel>
</HeaderedContentControl.Header>
<ListBox BorderThickness="0" SelectedItem="{Binding Path=CurrentPetitioner, Mode=TwoWay}" ItemsSource="{Binding Path=tblParties}" />
</HeaderedContentControl>
</Grid>
</UserControl>
This part is working fine as it loads another view that is vPetioner perfectly in the manner I want it to be.
Here is the code of vmPetitioner, a ViewModel:
Imports Microsoft.VisualBasic
Imports System.Collections.ObjectModel
Imports System
Imports CCIS.Model.Party
Namespace CCIS.ViewModel.Case
''' <summary>
''' ViewModel of an individual Email
''' </summary>
Public Class vmPetitioner
Inherits vmParty
''' <summary>
''' The Email object backing this ViewModel
''' </summary>
Private petitioner As tblParty
''' <summary>
''' Initializes a new instance of the EmailViewModel class.
''' </summary>
''' <param name="detail">The underlying Email this ViewModel is to be based on</param>
Public Sub New(ByVal detail As tblParty)
If detail Is Nothing Then
Throw New ArgumentNullException("detail")
End If
Me.petitioner = detail
End Sub
''' <summary>
''' Gets the underlying Email this ViewModel is based on
''' </summary>
Public Overrides ReadOnly Property Model() As tblParty
Get
Return Me.petitioner
End Get
End Property
''' <summary>
''' Gets or sets the actual email address
''' </summary>
Public Property fldPartyId() As String
Get
Return Me.petitioner.fldPartyId
End Get
Set(ByVal value As String)
Me.petitioner.fldPartyId = value
Me.OnPropertyChanged("fldPartyId")
End Set
End Property
End Class
End Namespace
And below is the ViewMode vmParty which vmPetitioner Inherits:
Imports Microsoft.VisualBasic
Imports System
Imports System.Collections.Generic
Imports CCIS.Model.Case
Imports CCIS.Model.Party
Imports CCIS.ViewModel.Helpers
Namespace CCIS.ViewModel.Case
''' <summary>
''' Common functionality for ViewModels of an individual ContactDetail
''' </summary>
Public MustInherit Class vmParty
Inherits ViewModelBase
''' <summary>
''' Gets the underlying ContactDetail this ViewModel is based on
''' </summary>
Public MustOverride ReadOnly Property Model() As tblParty
'''' <summary>
'''' Gets the underlying ContactDetail this ViewModel is based on
'''' </summary>
'Public MustOverride ReadOnly Property Model() As tblAdvocate
''' <summary>
''' Gets or sets the name of this department
''' </summary>
Public Property fldName() As String
Get
Return Me.Model.fldName
End Get
Set(ByVal value As String)
Me.Model.fldName = value
Me.OnPropertyChanged("fldName")
End Set
End Property
''' <summary>
''' Constructs a view model to represent the supplied ContactDetail
''' </summary>
''' <param name="detail">The detail to build a ViewModel for</param>
''' <returns>The constructed ViewModel, null if one can't be built</returns>
Public Shared Function BuildViewModel(ByVal detail As tblParty) As vmParty
If detail Is Nothing Then
Throw New ArgumentNullException("detail")
End If
Dim e As tblParty = TryCast(detail, tblParty)
If e IsNot Nothing Then
Return New vmPetitioner(e)
End If
Return Nothing
End Function
End Class
End Namespace
And final the code behind of the view vPetitioner:
<UserControl x:Class="CCIS.View.Case.vPetitioner"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
xmlns:vm="clr-namespace:CCIS.ViewModel.Case"
mc:Ignorable="d"
Width="300">
<UserControl.Resources>
<ResourceDictionary Source=".\CompactFormStyles.xaml" />
</UserControl.Resources>
<Grid>
<Border Style="{StaticResource DetailBorder}">
<Grid>
<Grid.ColumnDefinitions>
<ColumnDefinition Width="Auto" />
<ColumnDefinition Width="*" />
</Grid.ColumnDefinitions>
<TextBlock Grid.Column="0" Text="Petitioner:" />
<ComboBox Grid.Column="1" Width="240" SelectedValuePath="." SelectedItem="{Binding Path=tblParty}" ItemsSource="{Binding Path=PetitionerLookup}" DisplayMemberPath="fldName" />
</Grid>
</Border>
</Grid>
</UserControl>
The problem, presumably, seems to be is that the binding path "PetitionerLookup" of the ItemSource of the Combo box in the view vPetitioner exists in a different ViewModel vmCase which serves as an ObservableCollection for MainViewModel. Therefore,
what I need to Know is how to route the binding path if it exists in a different ViewModel?
Sir, I look forward to your early reply bringing a workable solution to the problem I face.
Warm Regards,
Arun -
If my phone service is disconnected, can I still use the number to iMessage? Under my setting in iMessages it only allows me to select my linked emails and the telephone number is there but grayed out and i can't seletect it ! It wont activate. I just recentely got AT&T. When I had verizon before and my phone got disconnected it allowed me to still iMessage off my number.
If your phone service is disconnected, it's not your number any more.
If you "just got AT&T", how can it be disconnected? -
View creation on MKPF and MBEW
Hi gurus,
I want to create a view on mkpf and mbew data base table for creating the generic extractor. Can one please tell me the step by step procedure or any screen shots send to mail id, my id is [email protected]
i will be grateful if any help is provided.
Thanks in advance.Hi ,
chk this
views
http://help.sap.com/saphelp_webas620/helpdata/en/cf/21ec5d446011d189700000e8322d00/content.htm
creating views
http://help.sap.com/saphelp_webas620/helpdata/en/cf/21ecf9446011d189700000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/f5/35c83ecedc636be10000000a114084/content.htm
Cheers,
Swapna.G -
OK, I need to be able to have a linked TOC, and also have destinations created in FM10 that will not be lost when I 1. Save the book as a PDF; then 2. I need the PDF to be as small as possible, but without losing my destinations. Anyone know how to do that??
I had been saving as a PDF and then reducing the size of the PDF by printing it as a PDF with a degree of image compression. I write manuals with a LOT of screen captures and line art that needs to be clear. So it is a balancing act between image clarity and PDF size. The PDFs on the web need to be smaller - sure you can undertsand.
Anyway, when I print the PDF again, I lose both my destinations and bookmarks.
Anyone know of any way to avoid that?Control the images by creating a custom PDF Job Options and then selecting it in the PDF Job Options drop-down of the PDF setup dialog box (File > Save as PDF...)
Create the custom PDF Job Options file with Distiller. If you do not have Distiller, open the Printing Preferences of the Adobe PDF printer. Start with the Smallest File Size Job Options settings and Edit. -
I'll pretty much just get a message that says something like google.com is invalid when I know it for sure it. Even if I just click on a link on like Gizmodo or something, I'll get that message. I'll close the message and then I'll click the link again and it would actually load up now.
== This happened ==
A few times a week
== A while ago. Perhaps a couple weeksClick here and request assistance.
(91679) -
How can i re-link .mpkg and .pkg files to hidden Installer?
I am near the end of the process of setting up my new Mac Pro (early 2009) eight core. Quite the wonderful difference from my "Mirror Drive Door" dual 1.25 GHz machine!
The Mac Pro came with Mac OS X 10.6.2 installed. I updated this to 10.6.6 via Software Update along with a slew of other updates presented there. I downloaded and installed a bunch of software. Finally, I was ready to install iLife 11 from the "CPU Drop-in" DVD that was on top of the box when the computer was originally unpacked.
Unfortunately, it wouldn't even begin the install. The "iLife.mpkg" file, when double-clicked, returned the error message "no application associated with this document". Hours of investigation reveals that NO .mpkg or .pkg file will open; doing a "get info" on the files reveals that those files have lost their link to the Installer app.
AND since the only installer I can find is hidden in /usr/sbin, there is no way I can re-link .mpkg and .pkg files to it via "get info".
I downloaded Pacifist and used it to open the "Mac OS X 10.6.6 Combo" package and re-installed the Combo updater. Much to my surprise, that didn't fix the linking issue.
I've logged in as root, but still can't re-link the package files to the Installer as /usr/ is still hidden. Is there a way I can temporarily "un-hide" the /usr directory so that "get info; open with" can see it?
I've started from the Mac OS X installer DVD and repaired permissions on the hard disk and "repaired" the hard disk. No luck there either.
I did a clean install of Mac OS X 10.6.2 to a different hard drive and applied the combo updater and the packages worked as expected there. So some software I installed or by running a slew of updaters via Software Update broke the link between packages and the Installer.
I'm sure that re-linking to packages to the hidden installer app can be done via Terminal and possible other ways, but I don't know how to do it.
Short of doing a complete Mac OS X 10.6 re-installation and update and having to re-do several days of other software installations and data transfers, I'm hoping someone will offer some solutions or tips on how to solve my problem.
How do I re-link .mpkg and .pkg files to the Installer?Thanks for the reply. I know I had previously checked for the missing installer in /System/Library/CoreServices/ and I rechecked and it's still not there. But your tip spurred me to check the test 10.6.6 installation on the other hard disk and yes! It's there!
A quick copy from the second hard disk to my current hard disk and doing the "get info" trick and everything now works wonderfully. Only one day lost to trying to figure this out. Now that the problem is fixed, quite the relief. -
Topics missing from link view and topic references
I am using RoboHelp X5 and have come across situations where
I have a URL, and all of the topics that link to it do not display
in link view, in the Show Topics References option, or in the
External Topics report. I want to know if there is an easy way to
correct this so I can see every topic that links to a particular
URL.
For example, I have a link to www.adobe.com that is
referenced in the TOC and 5 different RoboHelp topics. After I
initially set up all the links, all 5 topics show in link view from
www.adobe.com. In topic references, the TOC also appears. Then a
few days or weeks later, I try to view the links again, and some or
all of them no longer appear. If I display the link in link view or
right click and select Topic References, it may only show me the
reference to the TOC. If I remove it from the TOC, it no longer
appears as a URL at all. But it is still actually used in 5 topics.
Also, if I know it is linked from topic A, I could go in and edit
topic A and save. Then www.adobe.com will show up as a link in the
URL list again, and topic A will appear again in link
view/references. But I don't necessary know all of the topics that
link to it, and if I am trying to remove it from the entire
project, or change the URL, that becomes a problem.
I hope this makes sense and if anyone can help, I would
appreciate it!
ChrisRepair the broken links, create a zipped backup of the project, then delete the CPD file before reopening.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge -
Using BAPI_PO_CREATE1 : Linking service, and account assignment
Hello,
I have trouble when using BAPI_PO_CREATE1. When creating PO using BAPI_PO_CREATE1, I need to input service for each po item and the service itself need to have account assignment. I simplify the code below.
**PO item
t_poitem-po_item = '10'. "for item 10
t_poitem-PCKG_NO = '20'. "link with service
t_poitemx-po_item = 'X'.
t_poitemx-PCKG_NO = 'X'.
**Account Assignment
t_poaccount-po_item = '10'. "link with PO Item
t_poaccount-SERIAL_NO = '01'.
t_poaccount-DISTR_PERC = 1.
t_poaccountx-po_item = '10'.
t_poaccountx-SERIAL_NO = '01'.
t_poaccountx-po_itemx = 'X'.
t_poaccountx-SERIAL_NOx = 'X'.
t_poaccountx-DISTR_PERC = 'X'.
**PO Services
**1st row
t_poservices-PCKG_NO = '20'.
t_poservices-LINE_NO = '0000000001'.
t_poservices-SUBPCKG_NO = '21'.
APPEND t_poservices.
clear t_poservices.
**2nd row
t_poservices-PCKG_NO = '21'.
t_poservices-LINE_NO = '0000000002'.
t_poservices-EXT_LINE = '0000000010'.
**fill account assignment for services
t_POSRVACCESSVALUES-pckg_no = '21'.
t_POSRVACCESSVALUES-LINE_NO = '0000000002'.
T_POSRVACCESSVALUES-SERNO_LINE = '01'.
t_POSRVACCESSVALUES-SERIAL_NO = '01'. "acct. assign. link
t_POSRVACCESSVALUES-PERCENTAGE = '100'.
Every time i execute BAPI_PO_CREATE1 using entry similar like above, i always found error message in t_return like this:
No account assignment exists for service line 0000000010
I feel sure that i have fill every field needed to link services and account assignment which is using serial_no, but somehow it does not link correctly. Can anyone advise me if there is some thing missing or incorrect with my ABAP code above? Thank you in advance for your help. For sure, first helpful answer will receive my rewards point.
Regards,
AbrahamThank you for the code. Actually i have fill the required field as you told but i did not put it in my code here to focus the problem on service and account assignment. After checking out your code, i found that the different between your code and mine is in services table.
<u><b>your code :</b></u>
<b>POSERVICES:structure</b>
PCKG_NO : 0000000001
LINE_NO :0000000001
SUBPCKG_NO : 0000000002
SERVICE :3000000000017
QUANTITY :5
BASE_UOM :AU
GR_PRICE :20000
<b>POSRVACCESSVALUES: structure name</b>
PCKG_NO :0000000002
LINE_NO :0000000002
<u><b>my code are:</b></u>
<b>POSERVICES:structure</b>
PCKG_NO : 0000000001
LINE_NO :0000000001
SUBPCKG_NO : 0000000002
PCKG_NO : 0000000002
LINE_NO :0000000002
SERVICE :3000000000017
QUANTITY :5
BASE_UOM :AU
GR_PRICE :20000
<b>POSRVACCESSVALUES: structure name</b>
PCKG_NO :0000000002
LINE_NO :0000000002
SERIAL_NO :0000000001
The other difference are in account assignment table, you didn't fill SERIAL_NO field.
my code will be like below:
<b>POACCOUNT: structure name</b>
PO_ITEM :10
SERIAL_NO : 0000000001
If using your version, the error message will be:
<i>In case of account assignment, please enter acc. assignment data for item</i>
If using my version, the error message will be:
<i>No account assignment exists for service line 0000000010</i>
Please advise what was wrong with my code. Thank you.
Regards,
Abraham -
I had to reset my Apple password and now my iTunes and iCloud passwords no longer work. How do I get them linked again and under the same password. I've tried my new password on each login screen and it isn't accepted.
Hi skippy2012trev,
Welcome to the Apple Support Communities!
I understand that you updated your Apple Id and password but now you are being prompted for the old information in iCloud. You are on the right track by changing the Apple ID back to the previous email address temporarily so that you can sign out. You should not need to verify the email address. After you edit the Apple ID back to the old email address and then sign out of iCloud on your iPhone, edit the Apple ID back to the address you would currently like to use. There is no need to change the password again, only the email address, unless you prefer to update the password again.
If you're asked for the password to your previous Apple ID when signing out of iCloud - Apple Support
Change your Apple ID temporarily
If signing out and back in to iMessage or FaceTime didn't help, try these steps:
Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
Tap Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
Scroll down and tap Sign Out, then tap Sign Out to confirm. If you're using iOS 7 or earlier, tap Delete Account, then tap Delete to confirm.
Tap Keep on My [Device] or Delete from My [Device]. In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
Enter the password for your previous Apple ID.
Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
Return to Settings > iCloud and sign in with your new Apple ID.
Cheers,
Joe -
ACD 30" Dual Link DVI and MacBook Pro Unibody
I have the following configuration:
ACD 30" Dual Link DVI and MacBook Pro Unibody
I am exhibiting some intermittent problems with the 30" display not coming up when I reboot for example and here are some more:
1. MacBook Pro not in clam-shell mode and restart equals 30" display not turning on
2. When in Snow Leopard and I have the MacBook Pro running in clam-shell mode and I open the display on the MacBook Pro it remains black.
3. When waking the MacBook Pro from sleeping (MacBook Pro in clam-shell) the 30" ACD is "grainy" and the display is not usable and it requires a reboot to solve the problem.
Any help? In addition are there any other displays using mini-display port to mini display port technology?
What about a different monitor; will I still have to use the Dual Link DVI adapter to drive a display with higher than 1920x1200 resolution?
Are there adapters to go from mini-display port to display port?
Thanks,
MikeJust came across your post and i have a couple of suggestions ive noticed with the Dual-Link to Mini-DP with the same configuration.
When working in clamshell mode for example, the 30" will become the MAIN/Default display...So if you open your macbookpro while the 30" is on and the system is running, the screen will remain black because it is in closed mode; basically meaning there is no signal to be sent.
so if you want the display to show up, either restart or put into sleep mode, then wake the system WITH THE LID OPEN.
As for the grainy/static artifacts, its beena reported issue since day 1, not sure waht the fix or issue may be with it but heres a resolution.
Press; SHIFT CONTROL EJECT-KEY all at once, this will disable signal to the monitor, but not shut off the machine...then use your mouse or press a key on the keyboard to wake the display and the grainyness should disappear.
Maybe you are looking for
-
SDO_RELATE and SDO_BUFFER
Hi Folks, I created a generic stored procedure that gets a table and a polygon coordinates as parameters and returns the table records that satisfy a relationship. One example of fhe SQL executed by the procedure is: select GEOFT_MESORREGIAO.* from G
-
Hi, my printer was working fine until an error message came up. The error comes up on the printer screen as Cartridge Error: it then tells me to troubleshoot. I can't find what is wrong, so any suggestions are welcome. Thanks in advance, Lee.
-
Trouble installing w/ Adaptec 2940UW and Seagate ST19101WC
I am running a home built PC w/ an Adaptec 2940UW SCSI card and a Seagate ST1901WC SCSI hard drive. I have loaded and removed Redhat 6.1, Windows 2000, Windows 98 SE. I know that the hardware is installed properly. When I try to load Solaris 8 for In
-
I am trying to reduce the file size of a document in Pages. It has many jpegs. When I use File>Reduce File Size or Format>Image>Reduce File Size, I get stuck at "Determining potential file size reduction ..." and it will go no further. Selecting "Can
-
Passing a range to SAPBEX.XLA!SAPBEXSetFilterValue
Hello I need to pass a range of fiscal periods to the following function: Run("SAPBEX.XLA!SAPBEXSetFilterValue", myFilter, "", myRange) When 'myfilter' is a single value, I pass a fiscal period, which is a concatenation of fiscal variant(lets say Z9)