VIV for AuC asset error.

Hi Friends,
We have a scenario,
1. PO for asset was made in foreign currency and GRN done.
2. AuC asset settled
3. Now while making the VIV the exhange rate is changed and the system is trying to credit the asset, but as the asset is already settled and the balance is 0, system gives error message
"Acquisition value negative in area 01."
Now the issue is we can't have negetive value in the asset, we can't stop processing the VIV.
Any standard way to handle this.
Kindly suggest.
Regards,

Hi,
thanks for ur reply, i treid that earlier at sandbox.
Can't do that as that will allow the value of the asset to go below 0. Which is not the policy.
Thanks

Similar Messages

  • Internal Order for AUC Asset not getting created Automatically

    As per SAP Standard , when I create an  AUC Internal Order (KO01), and save , AUC asset is gets created automatically ted via AS01 and stores the AUC Asset in Internal Order settlement rule. 
    However when tried with the client Im not able to create, AUC is not getting automatically created and stored in Int Order Settlement rule.
    In config I have added investment profile to Ord Type  and in OAOA ( AUC Asset class setting , Investment profile is also checked)
    Kindly let me have your inputs to fix the issue
    Advance Thanks
    Sanjai

    Hi,
    In order to create AUC asset automatically by the system, you need to create an investment profile in OITA.
    Then assign this investment profile in the Internal order master data created through KO01 in the Investments tab.
    There is no option of assigning the Investment profile in the Order type.
    And in OAOA that is Asset class, select the radio button investment measure.
    You can default the Asset class of AUC in the investment profile or leave it blank so that same can be filled when system prompts for AUC creation.
    You cant see the AUC asset in the settlement rule once Investment order is created, but only after settlement of the balances to the AUC u can see.
    Thanks & Regards,
    Ravi Kumar

  • Error while attaching settlement rule for AuC asset

    Getting error "The share to be settled in rule 001 is not unique"  "Enter a unique number (001) (view: Actual settlement) "  when trying to attach a settlement receiver in transaction AIAB  - where to view the duplication of rules, and where to delete the rules ?

    Hello
    Check the transfer variant / receiving asset / transaction type.
    Check all rules again.
    Reg

  • Down payment for Normal Assets

    Dear Experts,
    I have an issue on Down payment for Fixed Asset.
    User created an Fixed Asset (Normal Asset) which is not a AUC Asset.Created a P.O and Assigned that Asset into the P.O.  Now he want to post the downpayment request for the same through F-47. Now they are getting the below error.
    You cannot use this transaction type to post to this asset
    Message no. AA 834
    Diagnosis
    The transaction type entered belomgs to transaction type group 15. It has been specified for this transaction type group, that it is only allowed to post to asset classes for which it has been explicitly allowed (for example, the asset class for assets under construction). The asset to which you are posting belongs to class 46 (chart of depreciation XXX). You cannot post to this asset class using the transaction type entered.
    Procedure
    Check the asset number you entered. You may want to allow posting to this asset class using this transaction type group.
    here i have the below doubts.
    1. Can we assign the other than AUC Asset Class in OAYB for down payment (Group 15).  but the system is showing the AUC Asset Classes only.
    2. Can we assign GL Accounts for Down payment and down payment clearing accounts in AO85 other than AUC Asset Classes also?  becasue if i check F1 help for those fields its saying only for AUC Asset Classes.
    Kindly help me for how to do the down payment for Normal Assets.
    regards,
    Gopi.P

    Hi,
    I have a simple solution for you, which treats your down payments made to asset POs also same manner as down payments to normal POs.
    Please check the below thread.
    [Asset Downpayment;
    Regards,
    Srinu

  • Settlement rule for AUC

    Dear SAP gurus,
    In AIAB, I have assigned the settlement rule for AUC asset id. However I am not able to see the settlement rule assigned in  As03. Is there any report

    Hi,
    you can see the settlement rule only in AIAB.
    regards Bernhard
    Edited by: Bernhard Kirchner on Jun 15, 2010 12:52 PM

  • AUC- Asset Under Construction - Gap Analysis

    Hi Guru's,
    I have a requirement to know the Gap Analysis on Asset Under Construction. 
    We are under Analysis Phase where i have to find out the Gaps related to business.
    I received a Reporting FD and asked to find out the data source.
    Please provide the Gap Analysis steps to over come on this specific requirement.  
    Based on my analysis i found multiple tables to derive the AUC - Asset Under Construction solution.
    Tables that involved to get the Asset Under Construction:ANLA, ANLZ, PRPS, ANEP, BPDY, T093B
    My Questions:
    Is there any SAP Standard Data Source for AUC- Asset Under Construction.
    Now in my high level requirement we are pulling the information from multiple tables.
    Please provide me suggestions how can i go ahead with the above requirement.
    Regards,
    Ganni

    Depends on how the FICO guys have configured AuC
    If they have chosen a separate asset class for this (as what tends to happen) - then the std asset data model will cater for this
    Just run the std content reports or build your own for the asset class of AuC

  • AUC Asset and depreciation error in Area 20

    Hi All,
    I have a problem with AUC settlement,  there is negative values in my AUC (Area 01, no values in Area 20) and when I am settle that to Asset master I got the error message Negative values not allowed in Area 01.   So I have selected negative values allowed check box for  Area 1 and Area 20 in AUC asset master data, now the settlement is fine and have settled that.
    Now the main problem I am facing is, here am seeing the balance of negative value on AUC asset under the Area 20 and also the total negative value is picking as Accumulated depreciation.
    Could you one provide the ideas how the nagative balace went in Area 20 and why it caluculated depreciation even though the depreciation key is 0000.
    Thanks
    Sreenivas

    Hai Qian,
    You can maintain the Net book value and special depreciationall values allowed in OADB t.code or whtever fields u want the maintain the All values allowed
    Regards
    Madhu I

  • Asset Down Payment  for AUC

    Hi,
    I am having a query in Asset Down Payment  for AUC
    I have configured for both Acquisition: down payments and Down-payments clearing account in 'AO90' in asset module.
    But I am still not clear why Down-payments clearing account account needs to be configured.
    The entry I am getting are
    1. F-47 DP request - I enter the Asset number here. Noted item.
    2. F-48 -DP- an entry is created as follows:
    Vendor     Dr     1000
    Bank     Cr     1000
    Acquisition: down payments     Dr     1000
    Down-payments clearing account     Cr     1000
    3. Now the Down-payments clearing account shows a credit balance all the time.
    How should this be rectified
    rgds
    Vidhya

    Hi Vidya,
    Option 1: When you follow based on your example, ie., asset debited during down payment entry, asset entry will be reversed when you adjust down payment against invoice.
    Option 2: Down payment request and down payment made against AUC asset with reference to Purchase order:
    With reference to PO: Please refer sap note number 310368 valuated goods receipt paragraph and they have clearly mentioned about making down payments against asset/AUC purchase order without getting debited to asset account.
    You have to make F5 378 message number to be a warning message instead of error message and you have to suppress asset related settings in OB41 posting keys 29 and 39. Posting key 39 is useful when you have down payment request.
    If you have done this, then it will show only warning message during down payment that "purchase order is related to asset" and it will not be debited to asset account. Also after following the above steps, it is not necessary for you to give Acquisition: down payments G/L and Down payment clearing G/L in AO90 transaction code.
    Hope this helps. Assign points if useful.
    Regards,
    Dwarak.

  • Error when I execute CJ88 form WBS element to AUC asset.

    Hi,
    We have one WBS element which was created to settle the values to AUC asset at the period end. Now we are in 2012 fiscal year 8th period. Asset accounting books were closed for company code of the 2011 fiscal year. This company code currency AUD and Controlling area currency is EUR.
    User has booked some expenses to this WBS element in company code currency in 2012 fiscal year 1st period. When he tried to settle in 2012 fiscal year 1st period, he is getting error like "First clear the values in previous year". when we go and see the WBS element for the 12th period of 2011 fiscal year, still there is a difference "0.01".
    When we go and see the CJI3 for this WBS element, fiscal year 2011 and period 12 still there is some 0.01 value. My doubt is why system is showing this difference in CJI3, even I have posted transactions in company code current. Client was able to close the Asset accounting books without any errors. 
    User has posted expenses debit and credit amount to this WBS element during the period in 2012 fiscal year, still system is showing 5.25 difference  for the same WBS element in CJI3 transaction code.
    Could any body help me to know why this difference is showing even we post the amounts in company code currency. Why system has not given any error in 2011 fiscal year when user was closing books for asset accounting?
    Thanks and regards,
    Yelamanda Rao.

    When closing the year, the system checks to see if Periodic Posting has been recently run, and throws error if it still needs running.  System performs other checks too, such as checks for incomplete asset records.
    However, the system doesn't check for missed settlements.  We have to manually check for settlement errors, and for pending settlements, before closing out the AA year.
    There could be an OSS Note on this topic, do not know.  You may need to reopen the fiscal year and AA year and complete your asset support transactions, settlement, periodic posting, AFAR, AFAB.
    Since the year is already audited, stay in touch with accounting and your auditor before taking these steps.
    It is possible to enter offsetting g/l entries to nullify and defer the impact of your settlement, etc., to FY12 if your requirement is to not alter the FY11 g/l balances audited.  But the AA sub-ledger will be slightly changed.
    Regards,
    Greg

  • MIGO Error WRX for Non-valuated Material for AUC

    Hi Expert,
    While Doing MIGO getting error see the screen shot below, in this scenario wht i did , i want to purchase two laptop we have made Purchase Order Capital and Given Material Non-Valuated no Valuation Class, and in this purchase order i ve assign the AUC Asset number along with Investment order No. once we we settlement the Order AUC to Main Asset thru AIAB & AIBU.
    system should suppose to give the Accounting Entry while MIGO Post.
    PK 70 217200 WIP Others as well 21720001 A/c Debited   Rs. 125000
    PK 96 150500  GR/IR Clearing a/c               A/c  Credited  Rs. 125000-
    but i don know where i done mistake why nt system allow to Post.

    By definition UNBW's are ony qty updating and have no value assoicated with them. Since the system needs to stock this qty somewhere it by deafult asks for a Sloc.

  • Error occured while doing depreciation for an asset

    Hi,
    I could running the depreciation for an asset in AFAB t-code.
    The msg is ""Testrun Completed successfully" and "No document were created for this run". I have purchased the asset for the month of April and wanted to run the depreciation for that month.
    Please Advice.
    Thanks
    Bnoy

    Dear Bnoy,
    If you look at the message itself saying Testrun completed successfully. So mean you are runnning depreciation posting program in TEST RUN mode, so it is understood not to post any document in system in real time and if any error occurs must show in simulation mode.
    If you dont found any error in TEST RUN, next running time remove TEST RUN and execute the same again, here at this time system will post the document and asset explorer will get updated with posted values.
    I hope this will help you to understand depreciation posting functionality, and you will be able to overcome the facing issue.
    If you have any doubts feel free to share, you are welcome !
    Regards,
    Pankaj A Bhalerao.

  • While creating PO for Low value assets error

    Hi Seniors,
    When user creating PO for low value assets ,system throwing error as
    u201CMaximum Low value amount exceeded in the case of at least one asset .u201D
    Details about this issue:
    1.User creating ONE  PO  for 8 assets as 8 line items, each line item
    value below 5,000 only.
    2.In this year only they created 8 new asset master records with ref to
    Particular asset class(below 5,000) asset class.
    3.Non Taxable item P0 (p zero).
    Checked:
    1. checked at AW01N, no values in  each asset.
    In configuration:
    2. at OAYK   Specify amount for Low value assets,
       Value is 5,000 rs
    3. at OAY2  selected option is u201CCheck maximum amount with qtyu201D
    I created POu2019S  for below 2 options
    1   Value based maximum amount check
    2   Check maximum amount with quantity
    But same error.
    Note:
    In development server i created  some POu2019s  like user creating in
    Production server but no error  in Dev server,
    Plz guide me.
    Thanks in advance

    Hi,
    I think you are using a single asset master record in all your line items in the PO.
    If you use individual asset master record for each line item in the PO, you issue might solve.
    Post again for further queries.
    Thanks,
    Srinu.

  • Mass transfer for AUC to Fixed assets

    Hi,
    I would like to do a mass transfer from AUC assets to fixed assets. 900 new fixed assets have been created. However, the AUC settlement to 900 assets are very tedious. Are there any batch processing available for this ?
    Or can I use via LSMW ?
    Thanks.
    Angel.

    Hi,
    Prepare an excel sheet with columns as shown in the settlement rules screen and then paste it into settle rules screen.
    I hope this can be done.
    Thanks,
    Srinu

  • Change of Cost Center in Asset Master for Investment measure (AuC) Assets.

    Hi,
    We have an asset class 4001 which has been maintained as an investment measure for AuC. I want to change cost center for all the assets that are maintained in the asset class 4001. The system is showing cost center field in display mode in change transaction of the asset AS02 for all the assets in the asset class. I want to replace the old cost center with new cost center in the asset master record. How can I make the cost center field changeable ? 
    Can anyone help me ?
    Regards,
    K.S.K

    Hi Kattula,
    We can change the cost center for AUC with Investment Measure. To do this you need to identify the relevant WBS element assigned to your asset. You can find the WBSE in Origin tab of your asset master record.
    Then go to the change WBS element Transaction CJ12 and change the cost center. Once you change the cost center of the WBSE, the change would automatically get reflected in the correspondind asset master record.
    This would solve your issue.
    Thanks & Regards
    FICO GSupport team.
    RK & IK.

  • Error in Balances for Individual Assets Report

    Hi,
    We are trying to generate a report through transaction code S_ALR_87011978 (Balances for Individual Assets, Including Components of Group Assets). However, we are wondering why the result always  says "No Data Was Selected" whatever asset/asset class we put as a parameter. When I checked the list of assets per group asset there are no entries. Does this mean that this report is specifically for group asset balances which is why there is no data/output generated because we do not have a group asset? Please confirm. Thank you!

    Hi,
    You are right that S_ALR_87011978 is only for reporting group asset or asset belonging to a group and the number of asset group should be entered in the asset number input field in order to output the report. If your SAP asset accounting is not using group asset it explains why the result you have been getting.
    Kind regards,
    John Chin

Maybe you are looking for