Vivid light blend mode

I'm having a problem flattening a file with a layer set to Vivid Light mode. When flattening or stamping the effect disappears - any suggestion?

That did it!! Sorta.. :-). It solved the problem, but created a newer one. It appears that the vivid light effect looked different when viewed at 50% or smaller. The layer appeared to have a yellow and red colored effect. When viewed at 66.7 or 100% part of the effect I was seeing was gone.
So my new problem is to frequently review my files at 100%. Since many of my files are fairly large (in file size) I see that I will need to traverse my image on a frequent basis.
THANKS for your help!
York

Similar Messages

What versions of Photoshop Elements have Vivid Light?

I'm looking for an earlier version of Photoshop Element. My laptop doesn't fit the system requirements for recent versions.

If your talking about the Vivid Light blending mode, then pse 2 and newer have that blending mode.
Photoshop elements 1 does not.

Masks and blend modes

Hello all,
So, I'm creating a chest caption and I wanted to have the text on a semi-transparent rectangle background. I also want to use a soft light blend mode on the rectangle. Now, I also want the rectangle to quickly appear from nowhere so I am using a mask, which I then move quickly off to the right of the screen thus revealing the rectangle.
Now, once I have added this mask, I don't seem to be able to use any different blend modes, just the normal one. I've tried changing it and it has no effect.
Can anyone tell me why this might be, and if there is a way around it?
Thanks
Chris

Try changing the blend mode of the group containing the rectangle and the mask. The elements below the rectangle of course need to be in a different group below this group.

Blending Modes ("vivid light") in After Effects?

I discovered that in After Effects CS6 (Win7) some blending modes seem to not work as expected.
I have a bitmap with transparencies above another bitmap and want to blend it with "vivid light" - but the result is the same as if i had no blending mode selected at all. The same is for "hard light", "linear light" or "hard mix".
Other blending modes like "multiply", "soft light" and "overlay" work just fine.
Does anyone have an idea what is wrong with my After Effects?

I'm sorry for not being as specific as requested in the faq. I thought it might be more helpful to reduce the problem description to the most relevant facts first, and see if it can be solved in a simple way.
My former experiences with providing all existing information in the first post is usually met with no answers at all, because people think: WOAH! Too much information. ;-)
Okay, I designed my video design in Photoshop CS6 first. This is how the design was supposed to look like - as it was composed in Photoshop.
There are two layers:
1. a pattern of semi-transparent patches on top and
2. a blue gradient background
the pattern (1) is composited with blending mode "vivid light" on the background (2).
After I exported both layers as pngs (24bit alpha) and imported them in After Effects and used the same settings as in photoshop, I got the following:
As you can see, I used "vivid light" as blending mode, but it looks exactly as if blending mode "normal" was used.
The render quality is set to final quality.
The same happens with blending modes "hard light", "linear light" or "hard mix" (i guess, you don't need screenshots, because they all look the same)
But other blending modes like "multiply", "soft light" and "overlay" work fine (in this case I used "overlay"):
So, the problem is: Why do some blending modes not work, while others work?
BTW: I also tried to import the PSD directly into After Effects with all layers retained, in case something was wrong with the pngs, that I exported - but the imported PSD produced exactly the same error. So, no difference there.
Now for all the questions from the faq. - i think most of them will not help to identify the issue, but i will try and answer all of them:
What version of After Effects? Include the minor version number (e.g., After Effects CS5.5 with the 10.5.1 update).
CS6 (11.0.2)
Have you installed the recent updates? (If not, you should. They fix a lot of problems.)
yes, I have
What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac".
Windows 7, 64bit latest version, all updates installed
What kind(s) of source footage? When telling about your source footage, tell us about the codecs, not just the container types. For example, "H.264 in a .mov container", not just "QuickTime".
any footage. it's regardless of what footage I use. in this special case it was 2 pngs (24bit alpha) - see above.
If you are getting error message(s), what is the full text of the error message(s)?
there is no error message
What were you doing when the problem occurred?
see above
Has this ever worked before? If this worked before by doesn't work now, what has changed on your computer in the intervening time?
it's the first time I tried
What other software are you running?
mainly software like Google Chrome or Microsoft Office - I'm not sure they have anything to do with the problem
Do you have any third-party effects or codecs installed?
I have Magic bullet looks installed, but since I don't use it in this project, I don't think it's got anything to do with the problem
Tell us about your computer hardware. Include CPU type and number of processor cores, amount of RAM installed, GPU, number of disk drives, and how any external drives are connected.
Intel something, 6 cores, 12GB RAM, and NVIDIA GTX 590 graphics card, (driver 306.97)
Do you have any third-party I/O hardware (e.g., AJA, Matrox, Blackmagic, MOTU)?
no
Are you using OpenGL features in After Effects?
I don't know.. I thought OpenGL in CS6 is all automatically and can not be turned off or on?
but i switched quality to "final render".
Does the problem only happen with your final output, RAM preview, or both?
everywhere
Are you using Render Multiple Frames Simultaneously multiprocessing?
yes. but if I turn it off, nothings changes
What is the exact sequence of steps that you are taking?
see above
hope this helps

How to add keyframes on blending Mode (Normal, Soft Light etc)

Hi All,
How can I add keyframes on blending mode? I have a movie layer and need it to start from Soft Light with sooth transition to Normal or Hard Light in a few seconds.How can I do this?
Thanks
Andy

Thank you. I have found another way here:
http://help.adobe.com/en_US/AfterEffects/9.0/WS3878526689cb91655866c1103906c6dea-7d0aa.htm l
"You can’t directly animate blending modes by using keyframes. To change a blending mode at a certain time, split the layer at that time and apply the new blending mode to the part of the layer that continues. You can also use the Compound Arithmetic effect, the results of which are similar to the results of blending modes but can change over time."
Have you tried that? which way is preferrable quality-wise?

"applying" a blend mode

Hi.
I was curious what rules PS follows exactly when it comes to merging of layers with blend modes other than "normal".
Can anybody direct me somewhere, where I can find information about that? I searched the web extensively, but couldn't find anything. Adobe Livedocs is mute about that, too.
For example:
- blend layer 2 (hard ligth)
- blend layer 1 (vivid light)
- Background layer (normal)
--> now if you blend layer1+2, you alter the visible (flattened) on-screen-image.
Another example:
I had a layer with a landscape + a medium-blue sky without stars. On another layer I had white stars on a (nearly) black backdrop. So I used the "lighten" mode to fill the medium-blue sky with stars.
Later on, I did some trick to remove the black backdrop and only have the pixels of the white stars on my layer. (And NO, I didn't do any "blend if" or "color range" or something therelike, I only used the blending modes!). Unfortunately I can't remember how I did it exactly, but I think I merged the layer with another empty layer (I know it sounds weird), possibly putting both layers into a group first and merging the group.
Fact is, that after the merging (of my stars layer and "???"), I got a layer with mode "normal" and pixels that had RGB and transparency values in such a way that they produced the same final (blended) picture as - beforehand - the pixels of the white-stars-on-black-backdrop did in "lighten mode". So if I went back and forth in the history (before and after merging), there was no visible difference in the flat-on-screen-image.
I would be so thankful, if anybody - by chance - knows what I had been doing :)
(I tried merging the layer with, respectively, an empty, a black-filled, a white-filled and a 50%grey-filled layer, but I couldn't reproduce it).

Thanks for helping. I'm sorry to repeat myself, but there are obviously other ways to achieve this, that's not my problem. The stars, etc... this was just an example.
"Blending a layer with an underlying transparency ..."-> First of all, I said "merging", and then "...does nothing" is not true. Try this for example: open the blending options of the "stars-layer" (or any layer for that matter), choose "blend if">"this layer" and drag the slider until a visible part of the image has disappeared, but a part is still there. Then create a new empty, transparent, layer and merge these two layers. Voilà.
Now, that's *not* the way I proceeded in my original example. Just to demonstrate that merging with an empty layer can be a workaround.
In the example here, you can see that a new layer has been created containing pixels with RGB and transparency values that produce exactly the same flattened-on-screen-image as before. You can go back and forth in the history and don't see any changes on-screen.
In my original example, I used another blending technique (not "blend if" but "lighten"). But
after merging, I also had a new layer containing pixels in "normal mode" that reproduced exactly the same on-screen picture as did previously the pixels in "lighten mode" in such a fashion, that - again - you would see no difference on-screen when going back and forth in history.

Has anyone ever encountered layer blend modes behaving strangely?

I use photoshop quite a bit for retouching and photo compositing. Tonight I encountered a strange problem. I was trying to create a vintage look on a photo and had a number of adjustment layers including a curves, levels, color fill and there were also a few texture/noise layers all set to varying opacities. Near the top of all this I had a vignette layer that was black around the edges and white in the center set to blend mode of multiply. Well, when I was clicking on and off I realize that that vignette layer was definitely lightening the center part of the overall image quite a bit (the part that is white on the vignette layer), almost like a screen. So I flipped the vignette layer through different opacity modes and saw that there was no change in its behavior, every mode was screening the white, even darker color and multiply. I thought maybe it was interacting in a weird way with one of the other layers so I turned all the others off except the back ground-- still no change. Then I dropped the layer down one at time until it was below the background. When I started to move it up again, it was behaving normally for a moment until I moved it up a couple levels in the stacking order and then it went back to the screen behavior. Anyway I shuffled it around a bit but there was no consitency to when it would display the correct opacity and when it wouldn't, so it did not seem to be an interaction with any specific layer. I don't know, but I can't really think of any case where white set to multiply should produce a lighter result even if it were interacting with another opacity. In any case it does seem to me that there is something going on with the overall computation of opacities. I tried creating a new black and white layer and it was also doing the same thing, behaving strange and not displaying the correct opacity.
I'm tired, so I'm going to bed. I'm going to shut off the computer and hope this goes away when I reboot, but if it does not, does this sound familiar to anyone? I'm not a regular visitor to this forum, but I thought I'd put it out there in case anyone else has experienced anything like this. I've only got 5 gigs of ram on this computer and I've been working away for a while... maybe photoshop just couldn't keep up(?) I'm using Photoshop CS5, RGB Adobe 1998 colorspace. I've never had anything like this happen in the last 11 years I've been using photoshop. Hmmm.... hope I don't have to reinstall or call support or worse. fingers crossed.

Nevermind. It is still having the problem. I have to think that this file is just corrupt somehow because I just opened another file and can't seem to cause the same problem. Basically, I can fill a layer with white, put it to a blend mode of multiply or darker color and it will block out everything of the image below, ie totally opaque. The opaqueness varies depending on the if there are other layers also on blend modes, but it does not seem to correspond to normal blend mode interaction. If I put it right on top of a regular layer with an image on it, it totally blocks it out on a blend mode of multiply... weird. I am going to scrap this file and see if the problem recurs in other files. My 2006 Mac Pro is getting some years on it and has been running pretty slow. I'm not a hardware expert but I've done everything I know how to do to maintain it. Was thinking of upping the ram to see if I can hold out a bit longer before I upgrade the computer. Wouldn't surprise me if this problem is related to the computer.

Problems with blending modes

Hi,
I have a layer with a solid color (212º,93,78) on top of which I have another layer with a solid color (205º,100,74). Call this second layer the blend layer. I then choose for it a blending mode of Color, and the resulting color in the top layer is (205º,100, 74). If instead I choose the luminosity blending mode, the resulting color in the top layer is (212º,93,78).
---all these are HSB coordinates.
According to the documentation. color and luminosity blending modes should behave differently:
Color
Creates a result color with the luminance of the base color and the hue and saturation of the blend color. This preserves the gray levels in the image and is useful for coloring monochrome images and for tinting color images.
------ the luminance of the base color is 78 (at least the brightness anyway - I know of no method to get the luminance)
Luminosity
Creates a result color with the hue and saturation of the base color and the luminance of the blend color. This mode creates the inverse effect of Color mode.
------- in this case everything is equal, which seems to me is not right.
Some light?
Juan Dent

Generally speaking, Photoshop works fine with Windows 8 but the display drivers aren't all up to the task yet, and Photoshop uses the GPU for a lot of stuff.
What video card do you have?
You might find you can go into Edit - Preferences - Performance in Photoshop and disable the usage of GPU (the setting is called [ ] Use Graphics Processor in Photoshop CS6, and [ ] Enable OpenGL Drawing in earlier versions). It's also possible that you might find things to work better if you leve the GPU enabled but change the advanced mode for it to a lower setting, such as Basic.
In a general answer to your question, yes, I imagine there will be updates through Windows Update and from Adobe that will correct the problems. You may be able to accelerate the fix by visiting the web site of the maker of your video card and downloading their recent driver release (though I caution against this with ATI drivers right now - their latest aren't really too good).
-Noel

Are there blending modes for the layers?

Like in Photoshop, is it possible to take on shape and blend (multiply, difference, soft light, etc.)the layers? I can't seem to locate it in Illustrator.
Thanks all!

Transparency panel.
Layers in Illustrator don't mean the same as Layers in Photoshop. Think of Illustrator's Layers as equal to Photoshop's Layer Groups (folders in the Layers panel), with each object on an Illustrator equivalent to a Layer in Photoshop. You can change the Transparency Blend Mode of any object on a layer independent of the layer itself. If you click on the circle to the right of a Layer's name you can target that layer and change the entire Transparency Blend Mode for the Layer.

Are FW blending modes preserved

I have a colored gradient bitmap image in "heat" mode over a
neutral black/gray image with white highlights, the latter of which
I want to stand out. In FW it looks great... Can I export these to
FL and expect the blending modes to remain intact?

Paevo Kelley wrote:
> I have a colored gradient bitmap image in "heat" mode
over a neutral
> black/gray image with white highlights, the latter of
which I want to stand
> out. In FW it looks great... Can I export these to FL
and expect the blending
> modes to remain intact?
>
I'm not sure about CS3, but as of Flash 8, these FW blend
modes were
supported:
Darken
Multiply
Lighten
Screen
Overlay
Hard light
Add
Subtract
Difference
Invert
Erase
I didn't hear much about the blend modes when CS3 came out,
so chances
are they are still the same. You can quickly check by Opening
Flash and
seeing if the mode you want is there. Generally, if the blend
modes
exists, it should work. Another option is to create a
flattened copy of
the blended image.
Jim Babbage - .:Community MX:. & .:Adobe Community
Expert:.
http://www.communityMX.com/
CommunityMX - Free Resources:
http://www.communitymx.com/free.cfm
.:Adobe Community Expert for Fireworks:.
Adobe Community Expert
http://tinyurl.com/2a7dyp
See my work on Flickr
http://www.flickr.com/photos/jim_babbage/

Photoshop Blending Modes in Flash?

So I've got this photoshop file Ive made for part of a flash
site that contains a layer using the Blending Mode "Soft Light"
and unfortunately flash does not have that one as far as I
can tell. When I import the psd the layer just loses its blending
mode. Can anyone tell me how I can achieve the same effect with the
layer from the photoshop file or if there is away to preserve
photoshop blending modes? Thanks.

Maybe overlay or screen would be closer to what you want.
If you would like to see how the blend modes work. Create a layer with black, 50% grey, and white on it. Duplicate the layer and invert it. This will flip the colors the opposite direction. Now with the top layer selected try the multiple, overlay and screen modes. While your at it go through the rest. On a PC when one blend mode has been selected you can use the up and down arrow keys to scroll through the modes.

Blending modes bug

I want to report a bug in the program Premiere Pro CC 2014. it first appeared in version CC.
blending modes bug
Compound
Arithmetic
Composite
each time one and the same
Describe a situation in which there is this bug
I apply a preset, any of these effects, or similar so that the clip is mixed with himself blending mode screen. so I very gently increases the brightness of the image.
and sometimes there is a problem. clip is not blended with himself simultaneously. but with some time offset. it turns out that the image becomes lighter, but doubles, blended two different frame.
strict laws, I did not reveal.
but most often the bug occurs when the cut clip already applied effect. or when the effect is applied to the clips that are not on the first track. or when the effect is applied to multiple clips at once.
I found some solution, but it is not very convenient.
if you go to the drop down list with the names of the tracks and re-select the same track, the bug disappears.
for example, we had chosen the "video 1", we once again choose "Video 1" and everything is current, as it should be.
sorry for my english, I am Ukrainian.
and sorry for wedding too)))

Here is another example. guys who have still a problem?

Why is a layer blending mode result altered by adding and effect?

I've done a search online and haven't come up with an answer but does anyone
know why a layers blending mode result is altered by adding an effect?
I am using CS3 on a PC (Windows XP SP2) and have two layers; one a Tiff and
a second a text layer with an ambient light and a spot shining on them. Both
layers have 3D turned on and accept lights and are in the same position in
space.
To make the text, which is coloured black, sit better I changed the layers
blend mode to soft light which works well.
I wanted to soften the edge of the text a little so I added a Fast Blur
effect and suddenly the result of the blend was completely different. If I
turn off the effect it goes back to what it was before but even if the Fast
Blur is set to zero, ie no blur on the layer, the blend result is altered.
Does anyone know what's going on?

Many thanks for that. I tried the Box Blur but it too shifted the result of the blend. In the end, to get this job out of the door, I changed the colour of the text to orange, lowered the opacity and used Multiply as the layer blend mode. Adding the Fast Blur effect to this didn't shift the result of the blend mode. It's not as sexy a look as using Soft Light but it works. I wonder if it's something going on with the maths or this a real bug? <[email protected]> wrote in message news:[email protected].. > Presumably a bug that uses the blur's convolution kernel when it > shoulddn't. Please report at <a href=http://www.adobe.com/go/wish>. Still, > sometimes changing the blend behavior is inevitable. Even if the layers > visually look the same, the actual pixel values may change and thus create > a different result in the blend formulas. That should not be the case > here, though. Replace the Fast Blur with Box Blur set to 8 or 9 iterations > and the result should look the same, but without the blending problem, I > guess. > > Mylenium

Import After Effects composition - blending modes will not transfer to Premiere

I have a lower thirds composition I want to import from After Effects CC into Premiere Pro CC. While I have no problem importing the composition, I do have a problem with Premiere Pro displaying properly the blending modes I set in AE.
I've tried every blending mode... (I read somewhere Premiere Pro is only compatible with some AE blending modes.)
What appears in Premiere is a completely flat composition.
Is it possible to import an After Effects composition, including blending modes? Any suggestions?
Blending Mode effect shown below, Soft Light. (After Effects first, Premiere Pro second.)

@ Jim Simon
Here's a sample of the lower-third in various stages. Each image is only a few frames of eachother (to show it's animated). As you can see in the final image (in Premiere), it's as tho the blend mode imports – you can see the light gray uglyness – but doens't blend.
After Effects composition, without blending mode.
After Effects compostion with blending mode, Soft Light.
Premiere Pro

Color Dodge Blend mode issue in CS4

Alright I'm running CS4 and I'm having an issue using the color dodge blend mode for my brushes. What im trying to do is to create a light effect which I've done this before and I've also run into this problem before and I've solved it but I just cant remember how. I have a dark gradient on my background and i created a new blank layer for my brush, i set the brush layer blend mode to Color Dodge and use a white brush so it will pick up on the gradient. The issue I'm having is it's just painting over the gradient as if nothing is there and it only starts picking up on the background on a ring that I uncover when I go over it with a brush I'll try and provide an image. the white is suppose to turn bright red when it goes over the colored part of the gradient but it only changes its color near this ring on the gradient that I didn't add in. . . it's a weird explanation and I'm sorry cant explain it better but I hope someone knows or can figure out what I'm talking about or experiencing. your help is appreciated

I tried what you said and overlay wont work because it's too dark. I don't know if it was something wrong with my brushes or something else.I opened an old PSD that i had done this same thing with and the color dodge was working on that but whenever i created a new one it would act strange like the image above. then i tried again later and for some reason it started to work. The only thing i did differently was reset my brushes and i created a group and changed the group's blend mode to Color Dodge then put in a blank layer inside the group folder with a normal blend mode and it worked for some reason. I still don't know exactly what i did but oh well it's working now. Thanks for your help. This is what i was trying to do so now you can see how it wasn't working above.

Vivid light blend mode

Similar Messages

Maybe you are looking for