Vivtar Webcam driver problem in Windows 7 Enterprise x64

Hi all, I had not long purchased a Vivitar DVR 708HD Camcorder and the camera itself is rather poor, but I was impressed with it's webcam function back when I had it working on a different computer. I'm not an amature as I'm usually quite good at finding
device drivers as I did a lot of manual driver installations in Windows 98 and 95 but this one as stumped me. The even more annoying thing is, I have lost the OEM disk for the camera (although, I wasn't entitrely sure if it contained a device driver for it)
and I have got it to work once but that was in Windows 7 Ultimate x86. Now my computer is running a 64 bit version of Windows (Windows 7 Enterprise to be precise, as described in the title) and I know some drivers do not like running in 64 bit if they are
not native to them but I was wondering if anybody possibly knows how to sort this. If it is a compatibility issue with 64 bit operating systems then so be it but I was hoping somebody could assist me with this and possibly find a driver solution to work this
camera.
If you need the Hardware Identifications here they are:
USB\VID_04FC&PID_1628&REV_0100&MI_02
USB\VID_04FC&PID_1628&MI_02
I suppose it could also be possible that Vivitar features a different type of Firmware for this cameras I'm not sure but good luck if you can help!
-Matthew

64-bit Windows requires 64-bit drivers.
You will have to contact Vivitar for assistance with your problem.  Vivitar has sole responsibility for support of their products.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Similar Messages

  • PCI Simple communications controller driver suitable for Windows 7 x64

    Hi,
    I'm looking for a PCI Simple communications controller driver suitable on Windows 7 x64.
    Does this have anything to do with Bluetooth? Because the Bluetooth is not working 100%, Nokia Suite does not recognize the Bluetooth device on my laptop.
    The Bluetooth symbol is in the taskbar, but only when i use "fn"+f12(wireless com.) after startup
    I have a HP envy 17 j009ed.
    Kid regards,
    NickdB

    NickdB
    Identical system, you find the drivers bios etc. here
    http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/Windows-7-64bits-drivers-for-En...
    Say thanks by clicking the "Kudos! Star" which is on the left.
    Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

  • MOVED: Driver problems with Windows Professional XP 64bit Edition

    This topic has been moved to Operating Systems.
    Driver problems with Windows Professional XP 64bit Edition

    Well, after looking around the forum here I found an answer that works! I wish I could remember who to give credit too though. I installed the latest Vista drivers and I got static all the time. I tried another members suggestion of disabling the X-Fi device in the Device manager every time I log off and then enable the X-Fi the next time I log in. I have great sound as long as I do that. Also, for connecting to a home system I am using the DTS-60, $00 on this website, but it works well if you havea DTS decoder. I am using the X-Fi extreme Music edition. Good Luck, hopefully another driver is on the way.

  • Problems deploying Windows 7 x64 computers with more than 8GB RAM

    SCCM 2012 R2 CU1
    Windows 7 x64
    We have a weird problem after upgrading from SP1 to R2 CU1. We have built a Windows 7 64 bit image with the latest updates (currently September 2014 updates). It deploys fine to all computers. But after some days – don’t know exactly – guess after 4-7 days
    - we start getting errors on computers with more than 8 GB of RAM. The errors just start out of the blue. We didn't change TS, image or driver package.
    The error shows in 3 different ways – depending of the computer model.
    1) BSOD – STOP 0x000000F4. Disk error.
    2) Task Sequence error 0x87D00269 when installing the first Application in TS. The error seems to have something to do with Management Point not found.
    3) Task Sequence simply stops after installing CMclient. No errors - it simply stops.
    For instance we get the BSOD on the Lenovo ThinkCentre M93p. But on the ThinkCentre M83 we get the TS error 0x87D00269. M93p and M83 uses the same driver package. They consequently  fail every time after the error has begun. If we reduce (remove physically)
    the memory to max. 8GB of RAM, they successfully run the Task Sequence.  We get the above errors on both Lenovo and HP machines with more than 8GB. 
    I made a copy of the production TS and started testing. I created a new driver package for M93p/M83. It contains only the NIC drivers. Now M93p an M83 successfully finishes the TS. Adding sata or chipset or MEI/SOL drivers to the package I get the 0x87D00269
    error on both m93p and M83. At least not the BSOD on the M93p ;-)
    Tried setting  SMSTSMPListRequestTimeout to 180 in the TS. Also tried putting in a 5 minute break before installing the first Application in the TS. Also tried putting in SMSMP=mp1.mydomain in the installation properties for the CMclient. It is still
    the same problem.
    Investigating the smsts.log on a computer with the 0x87D00269 error.
    Policy Evaluation failed, hr=0x87d00269 InstallApplication
    25-09-2014 08:59:59 3020 (0x0BCC)
    Setting TSEnv variable 'SMSTSAppPolicyEvaluationJobID__ScopeId_654E40B7-FC55-4213-B807-B97383283607/Application_d9eea5a0-0660-43e6-94b8-13983890bae2'=''InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
    EvaluationJob complete InstallApplication25-09-2014 08:59:59 3020 (0x0BCC)
    MP list missing in WMI, sending message to location service to retrieve MP list and retrying. InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
    m_hResult, HRESULT=87d00269 (e:\qfe\nts\sms\client\osdeployment\installapplication\installapplication.cpp,1080) InstallApplication
    25-09-2014 08:59:59 3020 (0x0BCC)
    Step 2 out of 2 complete InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
    Install application action failed: 'SCIENCE PC Guide'. Error Code 0x87d00269 InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
    Sending error status message InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
     Setting URL = http://mp1.mydomain, Ports = 80,443, CRL = false InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
    Investegating the 0x87D00269 error on the siteservers Status Messages Queries is weird.
    Install Static Applications failed, hr=0x87d00269. The operating system reported error 617: You have attempted to change your password to one that you have used in the past. The policy of your user account does not allow this. Please select a password that
    you have not previously used.
    Hopefully this is a bug in translating the errorcodes? Just to be sure I checked all the SCCM serviceaccounts and none of them have expired passwords.  And again why only on computers with more than 8GB RAM.
    Anyone else had problems rolling computers with more than 8GB og RAM?
    Why does this happens after a few days? To begin with, it runs just perfect and then starts failing on all machines with more than 8GB. Without a change in TS, image and driverpackage. We have seen this pattern for the last 3 month after
    updating our image with the latest Windows Updates. It all started after updating from SP1 to R2 CU1.
    Why does it only affect machines with more than 8GB RAM?
    How to get rid of the 0x87D00269 error?
    Seems to be somehow related to driver installation mechanism in SCCM in combination with Windows 7 64 bit, +8GB RAM and SCCM 2012 R2 CU1 or perhaps just R2.
    Any help or hints would be appreciated!
    Thanks
    Anders

    We have the same workaround, using a x64 boot image resolved all our issues with WinPE 5.0.
    Machines with >4GB of RAM
    Lenovo ThinkPad T540p failed applying drivers with 80040005
    Black screen/white cursor issues intermittently
    No updates from Microsoft, they are still looking through the logs, but we have updated our boot images and all is well now. Our case it still open with Microsoft, they are researching the logs.
    Daniel Ratliff | http://www.PotentEngineer.com

  • MSI 6670 MD2GD3 causing mouse problems in Windows 7 x64

    Hello! I bought a new PC and I`m experiencing a very annoying bug. My configuration is: CPU: AMD FX 8350, Motherboard: Asrock 990FX Extreme 3, 16 Gb Corsair DDR3 1600, Kingstong HyperkX 3K SSD + WD Caviar Black 1TB HDD, Graphics card: MSI 6670 MD2GD3 and a 550W PSU.
    I installed Windows 7 Ultimate x64 on it. Everything loads up very smooth and fast but the mouse is driving me mad!  After alot of testing with different mouses and different components i changed the graphic card with another one, from a friend (different brand). The problem went away... until i put my HD 6670 back in. What happens exacly is... the mouse behaves as if it sticks on clickable objects (links, buttons, etc). It lags for a fraction of a second than jumps to where i am trying to point it. It also freezez for a short moment when i open some programs. It doesn't do this everytime but it's very annoying... it ruins the whole experience of using a new PC  I have all the latest drivers and BIOS updates... The temperature of the system is more than ok... I can't find another explanation apart from the video drivers... Can anyone pls help me?

    The other video card was an old Radeon X800 GTO on PICE. The PSU is actually 520W, it's Booster SPS-520... i think it's a normal ATX psu. I am begining to think it's more and more a driver related problem... X64 driver problem to be more exact (i tested the video card on a Windows 7 32 bits setup and everything was ok). But on my 64 bits Windows, when i try running a program that is just a bit demanding for the first time... the mouse freezez for half a second while the program is loading. For example... after i turn on the PC... (i give it time to load up)... when i launch Google Chrome the mouse freezes for half a second. I did alot of testing around (i`m obsessed with this problem  ) and it turns out that the lag is much smaller if only one dispay is connected to the PC. Usually i have my tv connected to the PC as well, through a HDMI cable... and it's set to duplicate. Anyway, like i was saying, the freeze take less time when only one display connected, but it still freezes :(. Another strange thing: before instaling the video driver, when it's runing on Standar VGA driver, i can open Google Chrome for example and there's no freeze, everything loads up perfectly :| Is there anyway to fix this? Do u think the store i bought my video card from would accept it back if i pay off the difference and buy a more high end card from them? :(

  • Bootcamp Driver Problems in Windows 8

    I use a MBP 13" 2010 model, and I've used it for a long time, but it's never had any problems with Bootcamp until now.
    Last month I bought a copy of Windows 8 Pro x64 (disc) and I wanted to install it on my recently clean-installed Mac. I installed it with no problems using Bootcamp. Booting into Windows 8, I found that the Bootcamp Drivers weren't compatible with Windows 8, but I looked up a guide that told me just to install the drivers one by one. I did that and rebooted.
    The drivers still didn't work for some reason. The brightness controls weren't adjustable, the keyboard shortcuts didn't work, the trackpad failed as well, and numerous other problems plagued me in Windows mode. I re-installed the drivers and rebooted, but it still didn't work. I even installed the Nvidia display driver seperately, but no go. Is this Bootcamp's problem? Most likely the driver's out of date.
    So I'm stuck using my office computer now, until I can find a way to fix this. Any help would be appreciated.

    defan752,
    I recently put Windows 8 (64bit) on my 15" 2009 MBP. I performed a clean install utilizing Boot Camp. I followed instructions found online. Prior to installing Win8, I had WinXP installed on a partition, which worked perfectly.
    For my Win8 installation I upgraded my MBP's OS from Snow Leopard to Mountain Lion. Mountain Lion comes with a newer version of Boot Camp (version 4.0 - I believe). The newer version has a slightly different process for driver installation. It has you create a driver installation disc within the Boot Camp Asstant software running on my Mac BEFORE creating the partition and installation. First it will connect to the interenet and download the latest support files for the drivers for your machine, then it will ask you to insert a blank disc, upon which it will write Windows friendly installation file (the disc contained an executable file [.exe] which is to be run on the newly installed windows parition). While Boot Camp (4.0 or whatever it is that came with Mountain Lion) doesn't have official support for Windows 8, utilizing the Windows 7 installation method will create a Driver CD that works in Win8. After creation of driver disc, follow the normal installation instructions (create partition, install win8). Once Win8 finishes installing, go to the desk top (Windows Button + D), pop in the driver disc and the Executable file. After the file runs the drivers will be installed but will require a reboot in order to be utilized. Reboot your machine and you should be good to go.
    NOTE: hold on to that driver disc, I have already had to use it to repair some of my drivers that got messed (my own fault, not mac's or MS) and reran the executable file which fixed everything again.
    NOTE: You will be able to utilize much of the drivers in the Win8 environment, however there are limitations. While the trackpad supports multitouch, it is limited (two finger right click, two finger scrolling). The nifty new multitouch gestures in Win8, are not yet supported. I suspect they will be with future updates to these drivers. But we won't get that until Boot Camp can fully support Win8. Also I noticed that my speakers don't switch to headphones when I plug them in, nor does it recognize the toslink connection. I'm still looking for answers to those problems.
    For more details regarding the driver support in Windows 8 running on a Mac i found this website useful:
    http://arstechnica.com/information-technology/2012/11/no-support-no-problem-inst alling-windows-8-on-a-mac-with-boot-camp/

  • HP LaserJet Pro M1217nfw Multifunction Printer scaner driver problem in windows 7

    I have a HP LaserJet Pro M1217nfw Multifunction Printer. Printer is ok but Scaner has problem in Windows 7 scaner driver is deleted when i try to scan it show the error " Scaner not communicate " I have to reinstall driver after few minitus again same problem . Pls advise me what is the best solution for that

    Hi KrunalPatel,
    I'll paste a link to a troubleshooting document below - from what I've read, it has the best chance at fixing your scanner errors, as it has the most steps to try
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02917811
    Please let me know how it goes
    *** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
    If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. ***

  • HP 4520s Wi-Fi driver problem in windows 10

    Hi,
    I am using hp4520s and have upgraded to Windows 10 enterprise but wireless or even lan is not connecting and it is showing driver error in device manager. It's very very urgent please help.
    Regard,

    Where did you check for the driver update?  If it was on the HP site, try again on the AMD site
    http://www.amd.com/us/PRODUCTS/DESKTOP/GRAPHICS/ATI-RADEON-HD-4000/ATI-RADEON-HD-4200/Page s/ati-radeon-hd-4200-overview.aspx
    There are other threads
    http://forums.adobe.com/message/4805487
    and a whole lot of hits if you Google
    Radeon HD 4200 driver photoshop cc windows 8
    Best of luck

  • Lenovo y510p audio problem on Windows 10 x64

    Hi i am using lenovo y510p and i having some problem.After installing Windows 10 x64 I can`t use the 5.1 speakers connected via optics. At sound check box gives "Failed to play test sound"/
    To solve these problem I tried:
    1. Reinstalt drivers Realtek (tried as a version from official Lenovo suport and the latest version from Realtek);
    2.Plug and unplug optics (Realtek Didgital Output) in "Sound";
    3.Restart the Windows Audio  service.4. Reinstalt chipset and audio drivers.
    Now the external speakers working in stereo .

    The drivers listed for under Y510p was not the lastest for our audio hardware, hence why I gave you a link to (what I think) is the latest version. Those should have no problem working under Win 10 (and maybe Win 8.1).
    Y510p has a "weak" audio chipset in the sense that it isn't handled well by the drivers providided on Realtek's homepage.

  • Scanner driver Problem with - Windows 8.1 and HP AIO L7680

    Hi folk,
    i have a problem with my HP AIO L7680.
    I have made an upgrade to Windows 8.1 x64
    I install the actual driver version 14.8.0.
    The printer runs but the scanner makes trouble.
    When i will start a scan process i will get an error message and the scan process will be canceled.
    I will get this error message with photoshop, HP Solution Center and any other scanner software.
    The HP Print and Scan Doctor says i should contact the support.
    Here i am any idea?
    By the way i disabled my Antivirus Software during the installation.
    Thanks a lot.
    greetings
    Markus
    This question was solved.
    View Solution.

    Hi Markus,
    I understand that you are having an issue with scanning after upgrading to Windows 8.1. I will try my best to help you resolve this issue. I just need a little more information. What operating system are you running on your computer? Are you connecting wireless or with a USB cable? What is the error message that you are getting?
    I am including this document for A 'No Scan Options' or 'Scan settings are not set' Message Displays on the All-in-One there are trouble shooting steps for Windows 8 that will work for Windows 8.1.
    I hope this helps, let me know.
    Thank you,
    I worked on behalf of HP.

  • MS-6533E VGA Driver problem on Windows NT

    Hi
    We recently bought a computer with a MS-6533E board with a vga plug on it.  I am trying to find a driver for Windows NT 4 (sp6a), I couldn't find a driver for it on the CD-Rom that came with the board.
    I went on the web page, I downloaded http://download.msi.com.tw/support/dvr_exe/650nt3b.exe and I tried it, it didn't work :
    I installed it (SiS Compatible VGA), it asked me to reboot, I did, then it asked me to adjust my parameters, I have only 640x480, 16 colors, and 60 Mhz as choice.  I hit "Test" and I get a blue screen, the system halted.  I tried without hitting Test, but OK instead, asked me to reboot, I did, and then it told me the system couldn't use the driver.
    Can anyone help me please?
    Thanks
    Alexandre Thibault

    Hi Toucan,
    I'm getting a bit confused on your post... So now do you have or have not any VGA card running on your mobo... or you are still using any PCI VGA card? If you are using a VGA card, what card are you using? Give us the model of your VGA card...
    If your problem lies in onboard VGA, check if you set your BIOS to VGA/Int VGA? APIC disable(as you are running NT4)?
    All the Best... :D!!!

  • Bluetooth driver problem on windows 8.1 Yoga Tablet 2-1051f

    Hi,
    I just purchased my yoga tablet 2 but i can't bluetooth get working.
    Bluetooth device has status "Windows has stopped this device because it has reported problems. (Code 43)". Currently installed  driver from microsoft, version 6.3.9600.17093. Also I'v tried to install driver for bluetooth from http://support.lenovo.com/us/en/products/tablets/yoga-series/yoga-tablet-2-1051 but it didn't bring any changes. After trying to reinstall driver I'v noticed errors in event log: 1. The address of the local Bluetooth adapter is not valid, Source: BthMini, Event ID: 2; 2.The driver has been unloaded, Source: BthMini, Event ID: 17.
    Any help would be appreciated.
    Thanks in advance.

    Problem solved.
    I have found the way to set BT on.
    Instead Fn+F5 I have found on the section "Lenvo Internet Connection", a function that call "Radio Wireless".
    Now I'm happy.

  • Nvidia Geforce 650m driver problem for windows 8.1 on macbook pro

    Hey guys. I installed windows 8.1 on my macbook pro (mid2012, Intel core i7, retina, Geforce 650m) of course only for game, but I have a disappointing problem with the graphics driver. First I tried to instal graphics card driver by bootcamp (not the last version, the one before the last) .It started to install drivers one by one starting with graphics card, but suddenly the screen got black and remained black forever! I restarted the windows and guess what! after windows logo it got black and nothing more! Then I installed windows again and tried to install driver from windows update. It checked for update and found the driver for it and downloaded it and started to install, but again the black screen !!! Please help me thanks.

    DemetriAA wrote:
    no this does not work. bootcamp drivers are broken for windows 8.1 on an efi install. apple is withholding the discreet gpu drivers from microsoft to trick people into thinking osx is more stable/efficient and thus windows cannot detect which gpu it is supposed to use when it can see both. the discreet gpu is hidden in the fake bios setup that bootcamp wants you to install with. the problem with doing this is that the more powerful gpu is all you can use in windows so the computer runs more hot and is louder which is annoying and hard on the battery life.
    thanks apple, if i knew that when i bought the laptop i would have gone with something else.
    This is not correct. If you force an EFI installation on a preUEFI Mac, you will see GPU and Audio errors. A non-EFI Hybrid MBR installation works correctly. Does Windows have the ability to switch GPUs? OS X, using external monitors, uses the non-Intel discreet GPU and the machine does not run hot. If Windows can provide dual-GPU support (which they have) and also provide GPU-switching (missing), this can be done. Can it be done for older hardware, highly unlikely. MacRumors has threads with PCI Register changes to expose the Intel GPU and the machine still runs hotter.
    From Bootcamp Info.plist...
           <key>PreUEFIModels</key>
            <array>
                    <string>MacBook7</string>
                    <string>MacBookAir5</string>
                    <string>MacBookPro10</string>
                    <string>MacPro5</string>
                    <string>Macmini6</string>
                    <string>iMac13</string>
            </array>
    You can verify your Model Identifier from How to identify MacBook Pro models - Apple Support. The 2012 MBPs are 9,x models.

  • Installing Webcam Live! on Windows Vista x64

    This will inform all of the poor consumers who bought a camera shortly before vista was released, only to realize that the camera would not work with thier operating system that they would soon update too. I was very frustrated trying to get my "Webcam Live!" to work with windows vista ultimate 64 bit edition so i did some trial and error, trying basically every driver on the site.
    step 1: be sure that your camera is unplugged, and you dont have any remnants of other drivers on your system, and download the driver for Windows XP Professional 64 bit located here?http://us.creative.com/support/downl...type=0&x=9&y=7
    Step 2: right click the setup?icon and click properties
    Step 3: click the "compatibility" tab click "run this program in compatibility mode for:" and select Windows XP (Service pack 2)
    Step 4: right click the setup icon and choose "run this program as administrator" proceed with setup. The setup may get hung up, but as long as it gets to 100% before freezing you should still be okay.
    Step 5: Plug your camera in?Step6: Open your device driver. In my case the driver installed correctly and that was the last step. you may have to manually install the driver by clicking on the device, clicking update driver, and then point the computer to where it was installed to. this was very frustrating for me to figure out and took me about 2 hours. i hope i saved you some time, good luck.

    Maybe you can hel me
    Im unable to install itunes 7.0.2 because each time I try to i get an error message saying I have insufficient access to that key...the key being HKEYlocalmachine\software\microsoft windows\...etc, etc. etc...
    Can you helP???

  • Copying large files problem in windows 7 x64 professional

    Hi!
    I'm new to this forum and I recently installed windows 7 professional without too much trouble in my pc. The only thigs that doesn't work are the quicklaunch buttons (which I'm expecting HP to release it until october 22). The system is functioning ok, but I discovered a very serious problem when tranferring large size files (copy or move function) to an external source (in my case a external HD: model Western Digital My book 1 TB connected via USB). 
    When I try to move a file that is larger than 1 GB the system during the process gets slower and slower rendering my system useless unless I cancel the process and restart. This only happens when moving files from my notebook to my HD.
    I've been doing my homework and I checked microsoft technet forums, here's what I found:
    1.It seems a lot of people have this problem, in particullar the ones with an asus motherboard (which I know this isn't the case). But in my case since I don't know which motherboard my notebook has, I can't come up with a solution to this problem.
    2. It seems to be a particullar problem with the 64 version of windows.
    3. The users claim that the problem was solved when they upgraded the chipset, which I somehow tried but with the current vista drivers, but the problem wasn't solved.
    4. Some users claim that by using other software like teracopy or grant full permission control seems like a workaround to this, but no in my case. It doesn't work.
    5. With sisoft sandra I managed to get my motherboard from this notebook but with no luck finding information or upgrades to a Quanta motherboard.
    Here are my system specs (link to the HP site describing it):
    Model: HP pavilion 6950la
     http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01470050&lc=en&dlc=en&cc=us&lang=en&softwareitem=ob-55781-1&os=2100&product=3753762
    Windows 7 professional x64
    I'm worried about this and it seems weird to me that no one who has tried windows 7 professional x64 has mentioned this in the forum (or even mentioning it), because I think this is a really serious issue and I would like to make sure it gets known and hopefully solved during these days. I really don't want ot get back to vista just for this. And I hope my post will be useful to the HP people so they can get around this problem.
    Thankd in advance, will wait for your answers.

    Please repost your inquiry in the Microsoft Windows 7 Performance Forum. 
     Thank you!
    Carey Frisch
    Microsoft MVP
    Windows Expert - Consumer

Maybe you are looking for