VK11 Material Description Does Not Came from Material Master

Hi Gurus,
Good day. Please kindly help advice where does the material description in VK11 came from as it displays a different description not equal to material master.
Thank you in advance.
Regards,
Rellie

Dear Rellie,
It should show the same as mentioned in MM01. Plz check again d MM03 as description for a matieral wil always b picked from Mat. Master only across SAP.
If still ny specific issue then share otherwise plz close d thread.
regards

Similar Messages

  • Deleting iphone email does not delete from computer

    I am sure I must be missing something simple here....When I delete email from my iphone, it does not delete from my computer (either remotely or by syncing). So when I delete a bunch of emails, the very next time I open iphone email, it retrieves the very same emails just deleted....a viscious cycle. Can anyone assist with what must be a simple setting issue? Thank you.

    Nathan C:
    Thank you for your help.
    When .Mac is configured using the .Mac option on the
    iPhone it is always configured as IMAP. For that
    account, on your computer are you checking the
    messages via POP3, and on your computer, which
    program are you using to check those messages?
    .MAC Account - Home Computer: Under Mail/Preferences/Accounts it lists the Comcast account (from our ISP) as a POP and the .Mac account as ".Mac". I access mail thru Mac Mail Application and sometimes thru .mac thru the internet. Update on this account- I cleared the inbox and tried another test. Now it seems to be working. I delete a message from iphone and it will automatically delete from my home computer Mail App. and eventually it will be deleted from the .mac server when accessed thru the internet (these take much longer however). In any event it seem this account works now.
    Work Account:
    As for your work account, when looking at the
    settings, it should say POP3, IMAP and Exchange at
    the top. The button that is "pushed" is the one that
    account is using. The outgoing server should
    probably be smtp.comcast.net not smpt. Is that
    account using IMAP, POP3, or Exchange?
    I know these three options were there when the IT person set it up but now when I access this account in my iphone it does not tell me what was selected (IMAP,POP, or Exchange) under account information??? It seems to appear only when setting up a new account. Am I missing something?
    Also that was a typo. Outgoing server is listed as "smtp.comcast.net"
    So to give you as much info as I have:
    Incoming Mail Server is "Mail.(officeservername).com" and Outgoing is "smtp.comcast.net". (Using my Comcast ISP was the only way the IT person could get the email access from Iphone to work). And to calrify what is happening on the iphone:
    1.Email is accessed no problem from iphone, - downloading all new message from my work outlook works fine.
    2.When I delete messages on my iphone, however, it does not delete on my office computer which is on a server network. (Visa Versa does work - when I delete a message on my computer it will delete it on my iphone.
    3.NOTE : Contrary to what I posted earlier my iphone now is NOT "RELOADING" messages just deleted from Iphone but which remain on my office computer. This means half the problem is solved.
    4. THE ONLY THING LEFT TO FIGURE OUT IS HOW DO I CONFIGURE SO WHEN I DELETE A MESSAGE ON MY IPHONE I AM DELETING ALSO FROM MY Computer at work?
    (BTW in the above description I am referring to all wireless operation...not when syncing with iphone)
    Any final helpful thoughts? Thanks again.

  • Anyone have a real answer? Imovie 11/snowleo and now imovie does not import from iphoto..

    .. anyone have a real answer? Imovie 11/snowleo and now imovie does not import from iphoto

    romantiq_rik wrote:
      Karsten, I mentioned "IPHOTO to IMOVIE" photo transfer.
    In fact, you did not.
    We had NO idea if it was a photo or a pocket-camera movie you were trying to import from iPhoto.
    You also didn't describe what happens when you try to import.
    romantiq_rik wrote:
                     My pics are already in "IPHOTO" i want to import them into "IMOVIE" and although the
    pics appear in the last import tab in the "IPHOTO" librabry, they will not show up in "IMOVIE"
    when i click on the photo icon to import them...i see pics from previous imports only., but not the current one that iam attempting to import. It is not an device issue.
    this just started happening when i updated to "IMOVIE 11"
    OK, that's a bit more information.
    iMovie was probably already running when you imported the pictures into iPhoto and wasn't aware of the last import.
    Try to quit iMovie and iPhoto, then launch iMovie again. The last import should show up.
    Please take a few seconds to proof read your posts and also make then easy to read (no large letters, no underlining, no double line breaks in the middle of a sentence etc).

  • Canon i70 does not print from black cartridge

    I used to be able to print to my usb Canon i70, but now it does not print from the black cartridge. It prints a mixture of CMY to make a greyish color. Not black. The prints look washed out.
    I'm on OSX 10.4.11 (I even upgraded from 10.4.10 to see if it would fix this issue) & on a MacBook Pro.
    I've searched through the discussions and have tried many things, including updating to the newest driver that Canon offers on the i70 & have set my Printer Setup Utility.app to open in Rosetta to actually see & load the driver. Tried to re-install the original driver that came on CD, but then, I don't have access to the utility, and all of the print drivers are "gimp-Print v5.0.0-Beta2", and my model number is not offered. I've tried printing using most of the drivers (I just went down the list starting from 1000 to see if ANY of them would work, but got tired of doing it at 7100. I've also installed 2 new cartridges to ensure that it wasn't just the ink that ran out. Nope.
    When I print documents that have just black text, it prints with the CMY color & not the black. The tell tale sign is when I try to print a nozzle check pattern & the black ink doesn't show at all. Of course, that's only when I have access to the darn printer utilities.
    Any help would be greatly appreciated.

    hehe, yea, looks like the "street value" has gone up since you bought it, Ileen
    "est. street price: $249.99†"
    Anyway, I'm so darned obsessive - I couldn't stop until it was solved. I spent 2 days on this darn thing, and finally came across some help on removing the print head & soaking it. THE BLACK INK WORKS NOW! Yeah!!!
    (For anyone else that has the same problem (and the link above doesn't work), here's how to take the print head off: There's a grey tab at the front of the print head assembly that I had to lift up & it allowed me to remove the print head & soak it in an alcohol solution. (albeit 70% not the recommended 90%)
    The test sheet prints well now. A couple little broken lines, but I'm not complaining now. It prints. I'll probably do a couple more "deep" cleaning cycles to try and fix the rest, but I'm tired now & can finally get some sleep without having to think about what the problem is anymore.
    Thank you PAHU for helping me to determine it wasn't my OS or dual processor setup. You set me on the right path!!! Thanks Ileen for suggesting cleaning the nozzles too

  • Reset Password - System does not boot from DVD

    My System: Macbook Pro - 2Ghz Intel Core Duo - OS X - 10.6.8
    Hi everyone,
    i forgot my password. So i want to boot from install DVD to reset the password. Unfortunately my macbook pro does not boot from DVD (10.6.3).
    I press c all the time...but sometimes the macbook pro throws the DVD out...and sometimes nothing happens.
    The DVD drive is working fine...
    Any other idea?
    Thanks in advance.
    Fabian

    So when you boot holding option it shows a padlock with a password field? Is that correct?
    In that case we're talking about the firmware password, which you can't reset via the install disk. There is only one way to do this, I'm not certain if one is allowed to divulge that information publicly - might want to try googling "reset firmware password"

  • I have trouble creating a pdf portfolio from Outlook: the result does not have "From" or "Subject"

    I have trouble creating a pdf portfolio from Outlook: it creates the portfolio, but the result does not have "From" or "Subject" in the index.  Please help!

    Thank you, I am aware of this function.  The fields are present, but blank.  (It seems that the data is not getting exported…)
    Please keep trying to help me!
    -Nancie

  • In 5s, personal hot spot does not work from time to time. Not detected

    In 5s, personal hot spot does not work from time to time. Iphone does not get detected on Wi-fi or bluetooth. Restarting or rebooting does not help.  

    Settings, general, reset and reset network settings. Clear out your network settings and set personal hotspot again.
    also avoid special characters making a password. hashtags or open brackets for example doesn't work too good.

  • In iPhoto (09) I can add a description to a photo which will display when running the slideshow, however when I sync the Album to my iPad and I run slideshow the description does not display, WHY?

    In iPhoto (09) I can add a description to a photo which will display when running the slideshow, however when I sync the Album to my iPad and I run slideshow the description does not display, WHY?

    I'd ask that on the iPad forum.

  • I can add  a description and it displays on a slideshow but when I sync it to the iPad the description does not display, Why?

    I can add a description to a photo by clicking o the "i" and it will dsiplay on a slideshow but when I sync the album to my iPad the description does not disply, why?

    I'd ask that on the iPad forum.

  • HT1553 my macbook pro is frozen and does not move from loading screen. Can you help?

    my macbook pro is frozen and does not move from loading screen. Can you help?

    Call Apple Support and schedule a appointment for a hardware check, or take it into a Apple Store.
    We can't help you with that problem.
    Good Luck

  • IOS8.1 does not recover from soft reset on iPhone 6

    My iPhone 6 does not recover from a soft reset (holding the home and power key until you see the apple).  It stays in the white screen with the black apple and never returns.  The reset was necessary due to a profile change request. What is the solution and how are correct resets performed?

    Hello jeffrey281,
    Thanks for using Apple Support Communities.
    To troubleshoot this issue where your iPhone will not boot past the Apple logo, please follow the steps in the article linked to below.
    iOS: Not responding or does not turn on
    Take care,
    Alex H.

  • TS4080 apple thunderbolt display image on display intermittently goes dark, does not wake from sleep after clicking mouse or keyboard, but there is "bonk" sound after clicking mouse or pressing keys. Rebooting by pressing the power button resolves issue.

    My apple thunderbolt display (which I purchased 1.5 years ago; OS 10.7.5 Mac Mini) intermittently goes dark, does not wake from sleep after clicking mouse or keyboard, but there is "bonk" sound after clicking mouse or pressing keys, so am thinking it is a hardware problem with the display. Rebooting by pressing the power button turns the screen back on, but the same phenomenon has occurred several times. Could this be a software issue, or do I need to have my display repaired? Your feedback would be appreciated.

    Hi ED, tough to tell, but it does sound like it's waking with the bonk, just not displaying.
    Long shot but...
    I wonder if it's a variation of this, of which I've seen many different symptoms...
    Resolution
    Move the mouse or trackpad cursor over the center area of the login window so you can see the user icons. Click on the icon of the user that you would like to login as, type in the user's password, and press Return.
    If the login window is configured to show only the name and password fields, type in the user's name and password into the fields, and press Return (even if you cannot see the rest of the login window).
    Additional Information
    This issue will not occur if the display is not sleeping when the account is logged out. Use the steps below to confirm that the account is not configured to log out automatically while the display is sleeping:
        1.    Open System Preferences > Security & Privacy > General.  Click the padlock to unlock the preference pane and enter your admin password. Click the Advanced button at the bottom, then see if the option "Log out after N minutes of inactivity" (where N is the number of minutes) is enabled.
        2.    Open System Preferences > Energy Saver and configure Display Sleep to occur after the account is logged out, by dragging the slider to a number of minutes that is greater than N was set to in the previous step.
    Important: If automatic log out is not needed, disable "Log out after Nminutes of inactivity" in System Preferences > Security & Privacy > General. This will also prevent the issue.
    http://support.apple.com/kb/TS4135?viewlocale=en_US

  • Notes does not snyc from Icould to Iphoen 4s in either direction

    Notes does not snyc from Icould to Iphoen 4s in either direction
    what a piece of crap, this feature has never worked for me,
    ALSO I can't backup Notes in Itunes (I'm using Itunes for windows)

    See if this helps: https://discussions.apple.com/thread/3379269?start=0&tstart=0.

  • Does not read from the path

    Hi All,
    I am not sure if this is the right place for posting this.
    I have Oracle reports 10g installed in a linux box (10gAS). I have specified the path of the directories for reports in reports.sh file. But still it does not read from that path. What could be the problem?

    1. Check the env variable REPORTS_PATH
    2 Check the reports server conf file path. Open the <reports servername>.conf
    and check the value.
    Rajesh Alex

  • I am resurrecting my old iMacG5 for my grandson. Appleworks has question mark in dock and does not load from bundled software on original installation discs. Can anyone help?

    I am resurrecting my old iMacG5 for my grandson. Appleworks has question mark in dock and does not load from bundled software on original installation discs. Can anyone help?

    I'm sorry no-one has answered you yet - I'm afraid I don't know the answer to the question: but I wanted to put into your mind that starting up with AppleWorks at this stage isn't a good idea. The program was 'end-of-lifed' years ago, it won't run on Lion, and some of the document types created in it - Databases in particular - cannot be opened at all by any other program whatever. Word Processing documents can be opened in Pages, and Spreadsheets in Numbers (with some reservations in both cases), but building up a collection of AppleWorks documents at this stage is going to lead to problems later on.
    It's difficult to know what to recommend for a PowerPC machine that would still be compatible with modern ones. An older version of Microsoft Office, perhaps, if you can find one which will run on PPC; but most of the modern Word Processors are Intel only. This is something you would need to investigate.

Maybe you are looking for