VK34 for new condition tables

Hi everyone,
I would like to know if it is possible to use VK34 - create conditions with reference using user defined condition tables. I have a requirement to create Z pricing conditions with different validity dates but looks like VK34 only supports standard tables such as 305, 005 etc. I want to use this function for table 501, 502 defined by me
Thanks

Dear Sanjeewa
I think we can use this but before using you have to run some programs otherwise you will get some problems  i am not sure how comfortable it is

Similar Messages

  • Field Catalog (Output Billing) for new Condition Table

    Dear all,
    I am struggling with new Field Catalog Fields for my Condition Table
    To determine two different printers I have tried to add ERNAM (SAP author of document), and to print or not to print certain documents depending on Customer Number (Proforma and Packing list) I have tried to add KNDNR
    No matter which field I add, the system warns me "Choose the key from the allowed namespace"
    and in the Acces Sequence later on I am getting a red flag.
    So far I have gotten advise that I need to ABAP user exits, create tables and lots of tech stuff.
    I want to configure the system, not program it.
    So: Can I add fields to the Field Catalog without being an ABAPPER or can I not?
    Thanks,
    Nickelodeon

    Hi,
    You can add the field in the OUTPUT COMMUNICATION STRCTURES
    OUTPUT COMMUNICATION AREA for Billing is KOMKBV3 and the Include is KOMKBZ5.
    If you want to add the new field ERNAM then add this field from the VBRK
    Enter the field ZZERNAM in the commnication strctre KOMKBV3  in the include KOMKBZ5 in the data dictionary
    By entering the field in the Include KOMKBZ5 you automatically include it in the commnication structre KOMKBV3
    Next add the field  ZZERNAM in the communication table KOMB
    Now assign the values to the field in the FUNCTION MODULE   KOMKBV3FILL_
    Include the ZZERNAM in the field catalogue for the CONDITION TABLE of Billing documents .
    After doing this you can check the new field in the FIELD CATALOGUE in the CONDITION TABLE for OUTPUT DETERMINATION.
    Please try this for your Application area ( as i gave example for Billing documents) and revert back if you need any more details
    regards,
    santosh

  • Sales Order Unable to Use New Condition Tables for Tax Condition Type

    Dear All,
    I am currently working on SAP R/3 4.0. I have a new requirement for my tax where I need to create new condition tables other than the 4 standard SAP tables which are Customer/Material, Division/Customer, Departure Country/Destination Country, Domestic Taxes and Export Taxes. My new tables consists of Departure Country/Destination Country/Shipping Point/Tax Code. The requirement is that the tax code is based on the chosen destination country and shipping point. The problem I am facing now is that no matter what types of table I create or even I generate with reference to the standard table, the access sequence will only refer to the 4 standard SAP tables above. Even if I put my own table in the highest priority for the access sequence, the same thing happens. My sales order will only pick up date from the standard table.
    I wonder if anyone encountered the same problem as me.
    Kindly advise.
    Thank you.
    Regards,
    Yvonne

    Hi
    Yvonne
    I suggest fist check a simple thing ,whether u have successfully determined shipping point for each line item ,it is possible that just adding a line item will not trigger shipping point determination . So after u update the shipping point on line level u can rerun pricing and check agian if u r getting it .
    Secondly for tax purposes I suggest   Try to have Customer and material tax classification approach  this allows to u have long term flexibiliy and also reduces your maintenance activity . As if u change or add number of shipping points and business changes using the sequence of shipping point ,the logic of just using shipping point will not work.
    In Tax classification u cna add new condition table for each new tax category and use it in different access sequences.
    This information can be passed on to FI using Different Tax code for Different combination.
    I hope this helps
    Regards
    Mandar

  • New Condition TAble for Inbound Delivery

    Hello
    i want to maintain a new Condition table for the Inbound delivery picking with the combination of _Delivery type/Plant
    so that the Inbound created for the particular plant alone uses the particular output type.
    Where in IMG can i configure the new Condition table for this combination for the Inbound delivery ?

    Hi,
    Go to SPRO > Logistics Execution > Shipping > Basic Shipping Functions > Output Control > Output Determination > Maintain Output Determination for Inbound Deliveries > Here perform following;
    - Define Condition Table for Inbound Delivery
    - Define Output Types for Inbound Delivery
    - Define Access Sequence for Inbound Delivery
    - Maintain Output Determination Procedure
    - Assign Output Determination Procedures

  • New Condition Table not working in Sales order

    Dear All,
    I am facing problem in pricing procedure. I have created new condition table(LIFNR & ROUTE), included Vendor(Fwd Agent) and Route in condition table with sales area. I have added that condition table in access sequence and assigned access sequence to condition type. Then Condition type added into pricing procedure and assigned pricing procedure to document type.
    In sales order I've added route and fwd agent but while checking in analysis system does not determine route and fwd agent.
    Thanks and Regards,
    Kaushal

    hi,
    i have a query to ask why you need LIFNR in condition table creation.
    where in sales order it will trigger automatically.
    please check the config settings for route determiantion automatically.
    so that if route comes automatically into the sales order then from where you will trigger LIFNR.
    please clarify.
    regards,
    balajia.

  • How to add a feild as key combination for existing condition table

    Hi all,
    please any body can inform me about how to add a feild as key combination for existing condition table ex 901 having the key combination of sales organisation and material
    for this cond. table,how  to add a new feild ex:price list
    iam unable to add it in change mode of v/03.(even after removing this 901 table from Acc.seq.)
    Edited by: rajendraprasad vasam on Apr 25, 2008 10:08 AM

    mr.Rajendra
         I you have the access key - you can copy the 901 table and create a new table along with your required field. v/03
    Or
    in the access sequence for the condition type - add 1 more step and add your field.
    ie 10 - 901
    and in 20 - your required field
    regards,
    Reshmi
    Edited by: reshmi bhaskar on Apr 25, 2008 10:21 AM

  • New Condition table / access not getting picked in purchase order.

    I have created a new condition table for the tax to be calculated for Site / Material combination. The access sequence is also crated.
    When I created the purchase order the condition / tax is not getting picked. When I checked in the analysis, I found that the error was Access not made (initalize field) for the site.  The material is being picked up.
    Please note that the site is getting picked from KOMK table ( I think it is a header table), while the site is actually there in the line item level in the po.
    Request your help at the earliest.
    Regards,
    Veena.

    TCODE OBQ2
    Select the tax access sequence. Click on accesses. Tick the right combination required site / article . then click on the fields tab. This will take you to the next screen. There click on the field for which you want to change the selection table and then click on field catalog at the bottom of the screen.
    This will take you to the field catalog screen. there select the table and field and then save.
    With this procedure you can select the required field into KOMK OR KOMP.
    Regards,
    Veena.

  • Processing and Released Status when we create a new Condition table

    Hi all
    I created a new condition table in M/03, and assigned one field to it, Generated and saved. Then added the condition table in the access sequence. There appeared two more lines below the field that i have assigned. One is Processing status and the other is released status, both are having green lights. what are these and what is its impact.
    inputs will be highly appreciated
    thanks

    I myself could find the answer

  • New Condition Table in V/LB

    Dear Experts,
    We have created new condition table and created new access sequence with the new condition table.
    In V/LB ( Change Pricing report ) when i going to add new condition table in excisting pricing report system is not allowing.
    Please suggest is it possible to add new condition table in existing pricing report or have to create new priceing report incorparating new condition table.
    Regards,
    KC Choudhury

    Hi
    It is disabled in change mode (V/LB), only you would be able to select the tables in V/LA.
    thank you

  • Creating New condition table.

    Hi all,
    I want to create conndition table with new fields. I have added those Zfields to VBAP, KOMPAZ.
    Do i need to code anything in userexit_pricing _prepare_tkomp for populating the fields in list of allowed fields while creating while creating condition table?
    Thanks & regards,
    NarsiReddy.

    If any field to be considered for condition table, the same would be done via V/03 where you can add any fields that are missing from standard.  But once you save, system will ask for Access Key without which, it won't flow in condition table.  Hence, user exit is not necessary.  But it would be ideal if you explain the business process as to why you were looking for adding some new fields.  Hope, you are not reinventing the wheel.
    G. Lakshmipathi

  • New Condition Table in Tax Pricing Procedure

    Hi Friends,
    Have u ever created new table for TAX Pricing Procedure and assigned the same to acess sequence.
    We are using TAXINN.
    Scenario is given below:
    We receive material directly & some times we asked 1st vendor to send the material to another vendor without receiving into our factory. 1st case it will be cenvatable & in 2nd case it is non cenvatable (2nd vendor who receives material will claim)
    Presently we are using condition table of Plant / vendor / Material. To meet above requirement we want to make a table with Plant / Material / Vendor / Storage location combination.
    We maintain "Storage location" in filed catalogue VOK0 & then maintain in KOMPAZ appendix structure, so that it update KOMP & KOMK tables accordingly. When we are creating new table with storage location, we are getting error i.e. "storage location" field is not updated in KOMP & KOMK tables.
    Can any one guide me how to proceed ? Is there any other method for solving this ?
    Regards,
    Sai Krishna

    46C: You should do it the other way around: first update structure KOMPAZ with field LGORT, then add it to the field catalog in VOK0.
    You will then need to code these exits:
    USEREXIT_PRICING_PREPARE_TKOMP and/or USEREXIT_PRICING_PREPARE_TKOMK to fill in the storage location field.  If you add new fields to the catalog, you need to supply the values as well.  The userexits are available in MV45AFZZ.

  • Creation of Customized field for  Pricing Condition tables

    Hi Friends
    I have a requirement to create a  Pricing condition table with Customized field starts with 'Z'  and
    Field length should be more than 80.
    After creating New Customized Field, system  is not allowing to create Pricing Condition table and giving error 'Too Many fields selected (larger than 100 bytes)'.
    Could you please advice how to over come this error and Maximum field to create Pricing  condition table .
    Thanks
    Ravi

    Hi there,
    Table & table attributes are defined by the ABAPers. Not by finctional consultants.
    You need to have an access key to define new tables & access sequence.
    Check with your ABAPer. He will be able to help you with that.
    Regards,
    Sivanand

  • MM Request For Quotation Condition tables

    Hi experts,
      I am writing a Report, which i have requirment like Comparision of Vendor Quotations, for this i need MM Quotation condition tables,
    I was searching for knumv in EKKO table but the value was not updating in EKKO. please tell me where i can find the Quotation Conditions and it's  value.
       i am waiting for ur replys.
    Thanks & Regards.
    Murali Papana.

    Hi!
    Try to run ST05 (SQL trace) for the transaction, where the quotation appears. You'll find all used tables with this way.
    Regards
    Tamá

  • Table for printing condition table

    Dear all,
    Does anyone know what is the table that actually stored the information with the printing condition record number field (KNUMH) in the table B072?
    Thank you.
    Regards,
    Edwin

    Hi,
    This is nothing to do with the purchasing document. I'm searching for the condition record number in the B072 table (this table is storing the printing information) and I need to find out where this record link to which particular table.
    Thank you.

  • New Condition Table

    Dear Experts,
    Making in new table what is the use of click own With Release Status where it will effect please guide me.
    Pooja Panday

    Hi,
    Release status is use to set the 'status' of the condition record. For eg if u want to block certain condition records u can set it as block instead of deleting it.
    Release status can be set using Processing status . this is done in Sales and Distribution->Basic Functions->Pricing->Define Processing Status.
    Then assign this to condition record.
    So if u want this functionality for u r conditions then during making this table tick the Relase status field to add to this table.

Maybe you are looking for

  • How do i change my icloud email address to a new email address?

    I need to change my icloud account's email  to the email I;m currently using how do I do that?

  • Value Mapping in Java Mpping

    Hi All, How can we call a value mapping in Java mapping? Any of your inputs are welcome! Thank You, Mugdha Kulkarni

  • All emails into my inbox are being marked as read whether they are or not.

    All emails coming into my email inbox are instantly being marked as read. This is happening whether or not they have been opened in the reading pane, and is also happening on a colleagues computer as well. Any suggestions as to why this may be happen

  • Itunes XML Location String

    Hi Dudes and Dudettes, I've recently been on a mission to convert all of my Winamp playlists to iTunes so I can keep them all in the same order for my iPhone (I'm extremely particular about how my playlists and filenames work, but that's a different

  • Activation of 4s

    Is anyone else waiting still for actiation of the new 4s? I have been waiting for 4 hours now for the supposed email from apple to finish activation process and at&t says theres nothing they can do.