VL 150 Message - only 0 qty available of material XYZ

While creating a replenishment delivery from a STO I am getting this message saying only 0 qty available of material XYZ. Although there is enough stock both in MMBE and MD04. This delivery should be immediately confirmed but not sure whats the issue. Has this anything to do with ATP settings. This delivery number does show up in MD04 and is confirmed.
Any help is appreciated

Hi,
This is definitely related to ATP check. Please run T Code CO06 for the back order processing and check for the Cumulative ATP quantity column as on date. If the stock in that column is '0' then the mentioned error message will be displayed.
If there are any soft allocations done for the stock then those stock won't be considered for your Deliveries based on the settings made in OVZ9 (Scope for Availability Check Control).
You can then reallocate the stock for which the confirmation is done but is not scheduled for delivery so that the current outbound will get the necessary stock.
The MMBE screen does not reflect the stock which can be allocated but only the stock which is present in the Storage location. Always check for the column Scheduled for Delivery while checking for the available stock.
Hope this would help.
Regards,
Karthik.

Similar Messages

  • Issue in STO process-"only 0 MT of material available".

    Hi All,
    I am facing this issue during STO processing using mvt scenario 15 & 16. Let say that i have 5Mt of material stock left at plant A(dispatch plant). When create the load ticket(mvt-15) for the same qty , the ticket is created successfully. Now when i do the unloading ticket(with mvmt 16) the delivery doc gets created with the following error message-"only 0 MT of material available".
    I have checked the stock, and the stock is available for at the dispatch plant. Am i missing some configuration settings ?
    regards
    srinivas

    Hi Srinivas,
    Have you tried pegging the two line items or even "Auto Pegging"?

  • Sales order error - Only 0 EA of material 24 is available

    Hi friends,
    I got this message during sales order creation 'Only 0 EA of material 24 is available'.
    I checked for solutions for similar problem in this forum by search button. Could get hold of two unanswered question. I tried possibilities listed there but problem still persists.
    Any solutions to resolve this
    Thanks

    Dear Robert
    The reasons could be
    - non availability of stock of the material for which you are trying to create sale order
    - Already delivery is created and saved without doing PGI for the same material
    If the reason is first cited above, then you can create stock via MB1C with movement type 561.  If the reason is second cited above, then run VL21 where you can see if any delivery is created and saved without doing PGI.
    thanks
    G. Lakshmipathi

  • Only 0 EA of material available ( Strange Situation)

    Hello Guys,
    I have two Materials 
    Available Stock is Material A(QTY 10)  and Material B(QTY10).
    Now i have created sales order of each material with 1 qty.
    E.G
    Material A  qty 1
    Material B qty 2
    i have saved the document and then i have created delivery successfully.
    Now i have repeated the same step created sales order with Material A and Material B with 1 Quantities each now this time in delivery i deleted Material B and save the delivery document
    then i changed the delivery document(VL02N) and again add the Material B which i have deleted but i get this error "Only 0 EA of material available" although i have enough stock. I am using item requirement 202 Order w.indep.item
    Need help

    I have deleted Material B then again add the same 1. Below are some examples.
    Available Stock MAT A (QTY 20) and MAT B(QTY 20)
    Here
    Scenario 1
    Sales Order:
    Material A qty 1 plant 1000 storage 2000
    Material B qty 1 plant 1000 storage 2000
    Delivery(WRT SO)
    Material A qty 1 plant 1000 storage 2000
    Material B qty 1 plant 1000 storage 2000
    Now sales order created with ref to delivery(VL01N) without any issue
    Scenario 2
    Sales order:
    Material A qty 1 plant 1000 storage 2000
    Material B qty 1 plant 1000 storage 2000
    Delivery(WRT SO)
    Material A qty 1 plant 1000 storage 2000
    I have deleted MAT B this time and saved the del doc, now I realized that I have to add Mat B in same Delivery DOC again
    Material A qty 1 plant 1000 storage 2000
    Material B qty 1 plant 1000 storage 2000 ---> when I try to add the same material I got error.

  • Only 0 EA of material available - Error

    Dear Friends,
    I am facing a problem, which I do not know is a standard way in which the system behaves or is there some customization involved in my client which is letting the system behave that way.
    Please clear my doubt and help me on the same for correct understanding.
    Scenario: I have, say suppose 100 quantity of unrestricted stock in my plant and storage location.
    I create Order no.1 with quantity as 100 and save it and do not deliver it.
    I create Order 2, 3, 4 each with quantity 100 and keep them open i.e do not deliver it too.
    Now when I try to create delivery for any of the orders (i.e 1,2,3,4), it gives me an error 0 EA of material xxx available.
    Sol 1: Now, if the delete the schedule line of all the open orders and then try to put the schedule line entry in todayu2019s date for only 1 sales order and try to deliver it, it allows me. But if i change the schedule line date of all the open orders to today's date, it shows me confirmed quantity 100 in each order and gives me the same error while delivery. Hence i need to delete the schedule line of all the open orders.
    Sol 2: If the delete all the open orders (say 2,3,4 except order no:1 which I want to deliver), then also system allows me to deliver/PGI.
    Now the confusion is, that in case I have 100 unrestricted stock quantity in the plant, then it should allow me to create delivery for at least 1 Sales order, which it does not, unless I implement Sol 1 or Sol 2. Please tell me why does the system behave this way? Is this the standard behavior? If yes, what is the correct reasoning/logic behind the same? If you say that the system parks/reserves that much quantity against a particular order, then it should atleast allow me to create PGI for any one of the orders, which it does not.
    Thanx in advance for your time and help friends.

    Implement note  Note 45446 - Message: VL198 Item &: Only & are available
    Summary
    Symptom
    Message: VL 198 - Item &: Only & & are available
    The system reports that there is no availability although the stock is sufficient and is also not reserved by other requirements.
    Additional key words
    Batch split, product selection, VL01, VL02, stock transport order, stock transfer delivery
    Cause and prerequisites
    A batch split or a product selection is carried out for a material which checks for preliminary planning in the sales order.
    Solution
    Repair in the source code.

  • Stck is avlbl, facing Error 'Only 0 FT of material 200000000428  available'

    Hello Experts,
    i have created Scheduling Agreement in Test system, with reference to this i created Sales
    order.
    i tried to deliver one Sales Order in VA02 for a perticular
    finished material with 100 quantity,
    i am facing the below errors
    'Only 0 FT of material 200000000428  available'
    An item with no delivery quantity is not permitted. Item will be deleted.
    i checked the confirm quantity in Scheduling agreement its showing confirmed Qty in forecast delivery schedule
    , even in sales order all schedule line are confirmed.
    i checked the stock of the material in MMBE for the same, Though 20 000 quantity of material is
    is available there but still i am not able to deliver the order.
    Could you please help in this case ?
    Regards,
    Sujit

    1)  Ensure that safety stock is not maintained for that material in material master MRP view
    2)  Check in VL06G whether any delivery is created and saved for the same material without doing PGI
    In both the above cases, though you can see the stock in unrestricted, you cannot post the goods issue.
    thanks
    G. Lakshmipathi

  • Only 0 NOS of material JPLTP2511230  available

    Dear all
    while creating delivery, vl01n, system is giving error message like only 0 nos of material available despite material available
    please suggest the way

    Hi
    Are you trying to create the delivery for a future date. If not, did the incoming of material to the plant has happened as per the schedule.
    While proposing the delivery dates in the schedule lines, the system considers various factors including inflow and outflow of material. If the planned inflow has not happened then there will not be any material available 'for this order' to deliver. Check the Tcode CO09 for the ATP quantities. Guess there will not be any ATP quantities, though the stock is there in the plant.
    Thanks,
    Ravi

  • MTO Material not confirming Qty available as cust stock -Is co06 Compulsory

    Dear Gurus,
    I created a sales order for a material which is on strategy group 50. There was no stock available while creating the sale order so No Qty confirmation could take place during Availability check.
    MRP was run, and after confirming the process order Cus. Stock was available. As the material strategy group was 50 the stock was also reserved against the sale order.
    but when I go Sale order procurement tab Confirmed qty is showing zero, When I do material availability check Qty available to confirm is also showing zero. what I dont understand is even though Cust Stck is reserved against the sale order why am I not able to confirm the qty.
    In the procurement tab If i change Schedule Line category from cp(default: MRP) to cn(No Planning), then automatically the qty is getting confirmed.
    What am I doing wrong, Do I have to do compulsorily do back order processing (co06) to assing stock to an order?
    please help.
    Regards
    Sri.

    Hi,
    Please check if the stock is reserved against the customer. Secondly check your schedule line and Item category configurations.
    Regards,

  • Only 0 UN of material 900-002 IBGM available.

    Dear All,
    While doing Delivery - I have got an error Only 0 UN of material 900-002 IBGM available.
    I can see that 100 Units of material 900-002 IBGM is available in this Plant.
    However, During Deliver VL01N,  It says It has "0" Units of this material.
    Please advice me how to fix this issue.
    Niranjan

    Hi,
    Please search the forum before posting your questions.This question was answered a number of times earlier.
    Please find the below link which provides a lot of information on this issue.Still if your issue is not resolved please search the forum
    [Only 0 EA of material XXXXXX  available - While doing goods issue;
    Regards,
    Phani Prasad

  • Only 0 KG of material available

    Dear Experts
    we are having stocks in supplying site stock also commited but unable to create the delivery for my STO
    The errors showing
    "Only 0 (zero) KG of material available" along with
    "An item with no delivery quantity is not permitted. Item will be deleted"
    Regards
    Sudha

    Error: "5501247331 000030 Only 0 KG of material 850000610 available"  (STO of delivery in VL10F)
    OSS Reply :
    In transaction ovz9, please uncheck "Include sales reqmts" for
    Availability Check 02 & Checking rule B.
    In transaction OVL3
    Shpt plnt SC SLoc
    3130 3130 50 -> please change SLoc from 50 to 30
    3130 3130 01 50 -> please change SLoc from 50 to 30
    3130 3130 02 30
    Regd
    Sudha

  • Only 0 quantity of material available..

    can any one of you plz suggest , i try to do a test run of sales process.
    I have posted enough stock for a material , but when i try to deliver , the system prompts. Only 0 quantity of material available.

    Satish,
    Though you posted stock and raised the sales order , pls check when is the mat. availale date. If the confirmed quantity is zero which means you should first check the system calculated mat. availabily date .
    In VA01 (sales order) click on "Procurement Tab" check the Mat.Av.Dt for the line item. In the same row check if there is any route determined where it shows the Loading date.
    Check in VOV8 what are the lead time in days.
    System calculates ATP quantity by taking Warehouse stock plus planned receipts minus Planned issues. ATP quantity = Warehouse stock + planned receipts – Planned issues.
    Planned receipts: Planned orders, Production orders, Purchase requisitions, Purchase orders, Stock in transfer, Stock in transit, Stock at inspection, etc.
    Planned issues: Sales orders, Deliveries, etc. (Check if any open orders are there or the material)

  • Only 0 PAC of material available

    Hi,
    I have created a configurable material "pulsar81" when i am trying to process delivery its giving a msg "Only 0 PAC of material PULSAR81  available"
    regards,
    John

    Hi john
    The problem why you are not able to do transfer order is you need spacial stock and that you are not having as  , you have not done the mb1c with movement type 411E , you have done mb1c only with 561 E movement type
    do initial stock posting entry with movement type 561 E(special stock) . in mb1c
    it will be just an unrestricted stock only but not an special stock
    to make it a special stock
    again post the same material in mb1c with movement  type 411 E  and save it
    Now go to MMBE and see you can see the speciall stock differently and unrestricted stock differently
    then you can create transfer order
    Regards
    Srinath

  • DELIVER: "ONLY  0 ST OF MATERIAL X AVAILABLE".

    Hi, I have a problem with a sales order. I have created a sales order for a material (procurement type E "in house production"). This material has a specific network associated and its status is tecnically completed.
    If i see the order it indicates that the confirmed quantity is "1", but as i try to deliver the order it tells me "only 0 st of material available".
    I guess i have to execute some kind of movement (in the order it shows movement type "601" as the one associated to this position).
    Help me please.
    Thanks in advance.
    Luis Álvarez.

    Hi there,
    In your case availability check at delivery is done at storage loc level.
    In OVL3 check what storage loc is assigned to your shipping / plant combination.
    In MMBE check if there is sufficient stock against that storage loc.
    For certain scenarios, business process would require transfer stock from one location to another.
    Regards,
    Sivanand

  • "only 0 PCD of material are available"

    Hi Everybody,
    I have a case, need your help.
    I have Customer Sch. Agreement - 'X' for a material 'Y' , for quantity 100.
    For Y there is a schedule line dated on 20th Feb 2008 (20.02.2008) - in future for 100.
    It is confirmed on that date - 20.02.2008.
    Stock for the material in that plant in NIL (0) now.
    Present Stock = 0.
    Stock will be available on 20.02.2008
    Can i create a delivery (delivery date -20.02.2008) on TODAY?
    If delivery can be created - Can the delivery quantity be 100?
    While trying getting this error msg "only 0 PCD of material are available"
    Kindly give some suggestion.
    Thanks,
    snehasish maity
    Edited by: snehasish maity on Jan 31, 2008 8:35 PM

    Hello,
    As per my understanding:
    1) There is no stock available as on today (31.01.2008).
    2) The stock will be avialable only on 20th Feb, so you can  create the delivery only on 20th or after that (once the material become available in the storage).
    3) If you want to create a delivery TODAY, you need to raise the stock manually, then do the availability check in the change mode of the agreement, you will be able to deliver it TODAY.
    First of all check the material stock in MMBE, and chek for any requirements in MD04, then you will understand.
    Prase

  • I'm using a viewsonic 19" LCD monitor with a powermac 7100/66.  The only resolution available in the monitor control panel is 640x480.  The viewsonic gives me a message to use 1440x900.  The mac specs state it's capable of 1152x870 @ 8 bit. Help!

    I'm using a viewsonic 19" LCD monitor with a powermac 7100/66 running Mac OS 7.6.1.  The only resolution available in the monitor control panel is 640x480.  The viewsonic gives me a message to use 1440x900.  The mac specs state it's capable of 1152x870 @ 8 bit.  How can I get a higher resolution?

    For unsupported resolutions, one may need to see if there are any software
    solutions; maybe the minimum specs of the display are not met by an 8-bit
    color specification of the video card in the computer.
    Does the display support two kinds of connections, another one, plus VGA?
    Could be the display needs some other support for it to work. Drivers?
    VRAM? A different control panel and (third-party) software?
    The limits may vary due to the VRAM on the card. With enough there, and
    with a VGA connection (or supported converter to/from older Mac DB-15)
    and the video graphics card with minimal supported specs will show that.
    Been several years since I've run any PowerMac, & only used a variety of
    Apple CRT color displays with them. Most times, they were very adequate.
    A wider array of original choices appeared in the Displays control panel...
    So I suspect the lack of video support in the graphics card or VRAM, to be
    a player in this resolution limit you see in the control panel. A later CPU/GPU
    and better hardware, later Mac OS, offered greater support for newer driver
    along with better results.
    There may not be a workable upgrade to a different graphic video card for
    that old a vintage computer; or if there was one, to locate that now may be
    a next-to-impossible mission. Was there any hints in the web site for older
    Macs, the LowEndMac site, or others? Some are no longer current sites.
    In any event...
    Good luck & happy computing!

Maybe you are looking for