VL02N and VL10 - Adding to Outbound Deliveries in SD / LE

Hi all, can any-one help here? Within VL02N on changing a specific Outbound Delivery, you can [selecting Outbound Delivery on top LHS] select to "Deliver Sales Order". This causes the delivery to refresh delivery items against the original sales order, adding new line items where stock has become available to satisfy the order lines since the outbound delivery was created. I have attempted to reproduce this processing in batch using VL10, which appears to offer the same option "add to deliveries" and only "open deliveries" on the Delivery tab. However this appears to do nothing. Can any one advise on this or on how the same effect may be achieved?
Thanks

Dear VP,
Source Doc -> Delivery due list -> Picking -> Packing -> PGI -> Shipment doc creation -> Shipment cost
Most Importantly, It is mandatory to have routes defined to process the shipments.
Assign the Route in your sales order and create new delivery , then you can add them in Shipment.
For More, refer -
[Route in Sales Order|http://www.sap-img.com/sap-sd/route-determination-in-sales-order.htm]
Hope, this may help you, some extent.
Best Regards,
Amit

Similar Messages

How to get the all process orders and outbound deliveries based on material

Hi Team ,
I need one help from you regarding the MB 56 transaction.
My doubt is : How to get the all process orders and outbound deliveries based on material, plant and batch?
Please help me regarding this.
Thanks & Regards,
Srikanth.

Hi,
You can use ST05,to trace the program and find out,
hope it will help you...
thanks and regards,
veera.

In WM is it possible to have a TR's for Inbound and Outbound deliveries?

Hi All,
In WM is it possible to have a TR's for Inbound and Outbound deliveries?
In WM is possible to create a TO without TR being created?
Please let me know the configuration for the same!
Thanks in advance,
Kumar

The delivery itself is treated as transport request, hence you cannot get an extra TR.
Using LT01 with movement type 999 will create a TO without needing any TR.

Stock Transfer from one location to another through outbound deliveries

Dear GURUS n EXPERTS,
We have 5 warehouse and one manufacturing plant. Till this time we use two step Stock Transfer method to transferring stock from plant to ware houses.
Now, we want to use Shipping & Transportation System to to calculate transportation cost. But this system consider only outbound deliveries. So, our requirement is:
1. Create the outbound deliveries, but no billing.
2. Receive the material at warehouse against this outbound delivery but do not go for invoice booking.
How can we achieve it. Please guide us.
Thanks,
DSC

Hello,
You may see the IMG path SPRO->Materials Management->purchasing->Purchase Order->Setup Stock Transport Order. Here, the most important ones are Assign Delivery Type and Assign Purchasing Document Type. Availability check, Delivery tolerances etc. are optional. You need shipping point to be created using transaction OVLZ.
Thanks,
Venu

Goods Receipt is not completed but Outbound deliveries are getting create.

Hi,
I have a Cross Dock issue.
In cross dock scenario, after completing inbound process, outbound delivery needs to process.
in our case there is batch job running in the background, which is creating Outbound deliveries without completing the Inbound process.
This should not happen. Customer getting confused with this process,
process as follows:
SO-> PR-> PO-> Inbound delivery-> MIGO.
then we go to VL10C and create the Outbound delivery.
i check the availability check at delivery level, all setting are correct.
Please letme know what setting needs to be done for this, to restrict this process.
We need output like, 1st GR needs to be done , then using VL10C, outbound deliveries needs to create.
awating for your help.
Br,
Hari.

Hi...Krishna,
Can you explain the process for Inbound delivery creation.
Rgds

BAPI_SHIPMENT_CREATE - Shipment without outbound deliveries

Hello experts,
I am implementing bapi BAPI_SHIPMENT_CREATE for generating shipment number (VT01N). The user inputs are (1) outbound delivery number (2) shipment type and (3) forwarding agent. BAPI is generating shipment number in simulation and when called in abap program but without outbound deliveries (and Net Value calculation). Along with three user input parameters, i am also populating relavant
1--> TRANS_PLAN_PT, SHIPMENT_ROUTE, status flags, SERVICE_AGENT_ID of Header data.
2.->STAG_SEQ, INCOTERM, LEG_INDICATOR, ORG_SHIPP_DPMNT, plant of departure, dest. plant of STAGEDATA table (optional)
3.-->outbound delivery number in ITEMDATA table (optional)
4.--> corresponding fields of tables STAGEDEADLINE, ITEMONSTAGE, HDUNHEADER/ITEM (optional)
After populating these fields, RETURN parameter shows the shipment number but without attached outbound delivery (after clicking stage tab -- deliveries) and net value calulation.
Any help or suggestion in this regard will be of greate help.
Thanks,
Harish

BAPI_SHIPMENT_CREATE is for creating only, if existi, then you should execute BAPI_SHIPMENT_CHANGE

Same batch number with two outbound deliveries

Hi Gurus,
I have created 2 outbound deliveries.
When I created first delivery with batch no. XY with 20 Quantity and did also PGI as well.
When I created another delivery then same batch no. XY with 20 Quantity is replicating.
Pls help me in solving this issue as this is very critical issue.
Regards
Rakesh

Hi,
Check out in MMBE,whether the stock exist with same batch.
If not then
In search condition record >>> Details screen >>> put tickmark to deletion feature
So that when batch is completely utilise then it will not appear in list.
Same option is available in batch search condition type,you can set it here itself,so it will become always default.
Kapil

Multiple Outbound Deliveries

Hi,
How can I create multiple outbound deliveries for a Stock Transfer Order? The STO has more than a thousand items, which makes one outbound delivery with a thousand line items quite difficult to process with our current warehouse. I need to cut the Stock Transfer by number of line items...for example the STO with 1000 line items will create 20 outbound deliveries with 50 line items each.
Thanks,
Lee

Dear Lee,
First of all you can not save the STO with 1000 line items as limit for any sales/sto is 499. You may wonder why this? Because for each line item there will be 2 financial entries Debit and Credit and in 1 FI documents you can post maximum 999 entries.
so it will be better to process 3 to 4 documents say with 250 line items and then create delivery.
Also if you want to create automatic delivery for such documents then goto VOV8, select your document type, and in shipping data select IMMEDIATE Delivery as A Create delivery immediately
But i will suggest you to create 4 documents.
Hope this will help

Grouping Outbound Deliveries

Hi,
What is Grouping Outbound Deliveries?
How it will work?
What are the configuration steps?
and this is not collective deliveries
regards,
Kiran

Hi Kiran,
Please find the below links
http://help.sap.com/saphelp_470/helpdata/en/dd/560883545a11d1a7020000e829fd11/content.htm
http://help.sap.com/saphelp_rc10/helpdata/en/4d/fb785614a6412c903fc2f18c100947/content.htm
http://help.sap.com/saphelp_470/helpdata/en/dd/560cb1545a11d1a7020000e829fd11/content.htm
Thanks
Dasaradha

Is there an option to mass delete outbound deliveries?

hello
Is there any standard SAP transaction to MASS delete outbound deliveries? We need to delete a bunch of deliveries and wanted to check if there is any std sap transaction?
Cheers
VJ

Hi,
I assume no subsequent documents are created for the deliveries and PGI is NOT done. If this assumption is correct, then check the below forum link;
[collective deletion of deliveries|Re: Collective deletion of Outbound deliveries (PGI not done)]
Regards,

Pack two or more Outbound Deliveries into the one Handling Unit

Hi Gurus,
I'd like to, sometimes, pack two or more Outbound Deliveries into the one Handling Unit, can anyone please advise how this can be achieved.
Thanks in advance

Hi Simon,
there's no way you can do that, the HU is owned by the delivery, so the relationship is one to one.
In order to be able to pack items coming from multiple deliveries into the same HU/HUs you'll have to use Shipments: basically a shipment is made of deliveries and HUs are owned by the shipment, that way you would be able to achieve your result.
Pls. reward if useful.
Best regards,
Enrico

VL06O Outbound Deliveries report Not Displaying Reversals

Hi Experts,
Can somebody help me to advise if its a standard behavior of SAP or a design flaw , that in Tcode Vl06O reversed deliveries are not being displayed in the report.
If a delivery is reversed in a subsequent month to the original delivery, the delivery disappears from report
For Example, say we created Order & delivered last Nov , checking the report then it would be correct
But when the same delivery is reversal in the following Month , instead of a negative despatch being displayed in Nov, the report actually deletes the Delivery When we check again the Nov report.
Please advise.
Thanks alot in advance.
Regards,
Grace

Dear Grace,
As I understand your problem is that SAP doesn't display the reversed delivery in VL06O.
I tested:
1. Delivery created and GI posted in 12/2008
2. GI reversed in 01/2009 (VL09)
3. VL06O > "List Outbound Deliveries" > I can see the delivery, no prolem.
VL06O delivery report is not the same as MB51 goods movement report. It doesn't report goods movement it is a report about deliveries. It doesn't matter what has happened to the delivery, it will display the delivery only in one line (once) - even though GI has been posted hundred times and reversed hundred times.
Or is your problem that SAP doesn't display the delivery in this report at all? My experience is not that, the mentioned delivery was in the report.
If the delivery is not in your report, please check:
1. Filter criteria in VL06O > "List OD" report
2. Please also check in VL03N whether the delivery exists at all (maybe someone deleted it - in this case no wonder if you don't get it in the report)
Regards,
Csaba
Edited by: Csaba Szommer on Jan 18, 2009 10:40 AM

VL06O - OBD monitor - Deliveries not seen in "List outbound deliveries"

Hi All
I've a strange issue. In VL06O - OBD monitor I used option "List outbound deliveries" to view deliveries for which PGI is already completed, however I do not get any deliveries in the list.
I'm using the standard display variant: "SAP&STANDARD".
Removed all dates and did not enter anythiing in the screen except the delivery note number.
Why a I not getting the delivery in the list? Any ideas, what am I doing wrong?
Thanks in advance.
Regards/Rajesh

Just try without variant.
In the selection screen, input some values for example, sales area/shpping point/created on (for example >01/01/2010)) and total goods movement status as C.
The system will show the deliveries that are already goods issued.
You may also refer OSS 1459217 - Performance Issues with Transaction VL06G (Collective Goods Issue of Deliveries) / VL06O
Regards

List of outbound deliveries to be invoiced

Hi all,
can you please give me the list of outbound deliveries to be invoiced. Vl06o gives the list of outbound deliveries created.
but i want all the list which are delivered and yet to be invoiced.
very urgent.
thanks in advance.
anil.

Hi Anil - Please run VF04 and provide input details (sold to, etc) and execute to display the list... also, check "delivery related Invoice" option to see what delivery documents are awaiting billing documents.
Thanks
Nikhil

How to close Open Outbound Deliveries

Hi All,
please could u tell me how to close Open Outbound Deliveries?
Regards,
Ramesh

Ramesh,
The delivery will be open until the PGI is completed and fully invoiced. If you don't want to inoice, then PGI needs to be reversed and delete the delivery.
If all the subsequent documents are created for full qunaity and still the delivery is open, then you will need to set the status as completed in the debug level. Consult your ABAP expert.
Prase

VL02N and VL10 - Adding to Outbound Deliveries in SD / LE

Similar Messages

Maybe you are looking for