VL02N:Post Goods Issue Error: PXA_NO_FREE_SPACE
Hi gurus,
i am testing post goods issue under vl02n after posting&delivering a sales order with type OR. the ' PXA_NO_FREE_SPACE' error occured after my clicking post good issue.
PFB the error log, can anyone help to solve it out. TIA.
No PXA storage space available at the moment.
What happened?
The current ABAP/4 program had to be terminated because there
was no space available to load it.
Each ABAP/4 program to be executed is stored in a central
storage area that is divided between all users.
This area was too small to hold all currently active programs for all
users.
Resource bottleneck
The current program "SAPMV50A" had to be terminated because
a capacity limit has been reached.
What can you do?
Since this could have resulted in a temporary bottleneck, you should
try to restart the program.
Ask your system administrator to increase the size of the area (PXA)
used to store the ABAP/4 programs.
Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
Error analysis
Unable to load a program of 1048576 bytes.
The PXA ('program execution area') was too small to hold all
currently active programs for all users.
At present, the size of the PXA is set at 144868 Kbytes.
The largest contiguous and unlocked memory chunk has 1014784 bytes.
How to correct the error
The current size of the PXA was set at 144868 kilobytes.
You can increase or decrease the PXA in the SAP profile. When
doing this, please refer to the relevent instructions in the
installation manual.
You can use the utility program 'ipclimits' to display the
available system resources.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"PXA_NO_FREE_SPACE" " "
"SAPMV50A" or "FV50XF0B_BELEG_SICHERN"
"BELEG_SICHERN_POST"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
any reponses will be awarded,
regards,
samson
Check these links where the same issue was discussed
[PXA_NO_FREE_SPACE|http://www.sapfans.com/forums/viewtopic.php?f=12&t=304020&p=917783]
[PXA_NO_FREE_SPACE Error|http://sap.ittoolbox.com/groups/technical-functional/sap-basis/pxa_no_free_space-error-858115]
thanks
G. Lakshmipathi
Similar Messages
-
When I Press the Post Goods Issue Button for a delivery in SD the error dump appears.
Runtime Errors MESSAGE_TYPE_X
Date and Time 10/15/2008 06:38:52
Short dump has not been completely stored (too big)
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
Short text of error message:
No RFC destination is defined for SAP Global Trade Services
Long text of error message:
Technical information about the message:
Message class....... "/SAPSLL/PLUGINR3"
Number.............. 002
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_X" " "
"SAPLMBWL" or "LMBWLU21"
"MB_POST_GOODS_MOVEMENT"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "biw7sap"
Network address...... "68.88.249.38"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x Intel 801586"
Character length.... 16 Bits
Pointer length....... 32 Bits
Work process number.. 1
Shortdump setting.... "full"
Database server... "BIW7SAP"
Database type..... "ORACLE"
Database name..... "ECS"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Mar 20 2007 00:45:21"
create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version. "OCI_10201_SHARE (10.2.0.1.0) "
Patch level. 102
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory consumption
Roll.... 8176
EM...... 26130600
Heap.... 0
Page.... 57344
MM Used. 19070624
MM Free. 785208
User and Transaction
Client.............. 800
User................ "CUSER14"
Language key........ "E"
Transaction......... "VL02N "
Program............. "SAPLMBWL"
Screen.............. "SAPMV50A 1000"
Screen line......... 39
Information on where terminated
Termination occurred in the ABAP program "SAPLMBWL" - in
"MB_POST_GOODS_MOVEMENT".
The main program was "SAPMV50A ".
In the source code you have the termination point in line 59
of the (Include) program "LMBWLU21".
Source Code Extract
Line
SourceCde
29
when a goods movement for an inbound or outbound delivery is posted
30
directly from VL31N/ VL01N, XBLNR is not yet known when we call
31
CKMV_AC_DOCUMENT_CREATE, but the number is supposed to be stored in
32
BKPF as well. There is no other way to forward XBLNR to FI as not
33
every document is posted by MB_CREATE -> a new function module in
34
MBWL for transferring the information, called by FI, meant to load
35
the complete function group for all MBxx postings when this isn't
36
required (Performance). Would be the better way to transport the
37
information after switching off MBxx in later release.
38
corresponding IMPORT ... FROM MEMORY ... can be found in
39
AC_DOCUMENT_POST (FORM FI_DOCUMENT_PREPARE (LFACIF5D))
40
l_mem_id = 'MKPF-XBLNR'. " 641365
41
EXPORT xblnr = xblnr_sd TO MEMORY ID l_mem_id. " 641365
42
ENDIF.
43
IF xmkpf-xabln IS INITIAL. "note 434093
44
CALL FUNCTION 'MB_XAB_NUMBER_GET'. "note 434093
45
ENDIF. "note 434093
46
47
ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_01 SPOTS ES_SAPLMBWL STATIC.
48
49
ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_02 SPOTS ES_SAPLMBWL.
50
CALL FUNCTION 'MB_CREATE_MATERIAL_DOCUMENT_UT'
51
EXCEPTIONS
52
error_message = 4.
53
As soon as we have started to put things into UPDATE TASK, we must
54
ensure that errors definitely terminate the transaction.
55
MESSAGE A is not sufficient because it can be catched from
56
external callers which COMMIT WORK afterwards, resulting in
57
incomplete updates. Read note 385830 for the full story.
58
IF NOT sy-subrc IS INITIAL.
>>>>>
MESSAGE ID sy-msgid TYPE x NUMBER sy-msgno WITH "385830
60
sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
61
MESSAGE A263.
62
ENDIF.
63
Optische Archivierung
64
Spaete Erfassung mit Barcode
65
Redesign of barcode handling -> note 780365
66
PERFORM barcode_update(sapmm07m) USING xmkpf-mblnr
67
xmkpf-mjahr
68
barcode.
69
70
MOVE-CORRESPONDING xmkpf TO emkpf.
71
CALL FUNCTION 'MB_MOVEMENTS_REFRESH'
72
EXCEPTIONS
73
error_message = 4.
74
MOVE-CORRESPONDING xmkpf TO emkpf.
75
CALL FUNCTION 'MB_MOVEMENTS_REFRESH'
76
EXCEPTIONS
77
error_message = 4.
78
IF NOT sy-subrc IS INITIAL.
Contents of system fields
Name
Val.
SY-SUBRC
4
SY-INDEX
0
SY-TABIX
1
SY-DBCNT
1
SY-FDPOS
6
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
W0
SY-UCOMM
WABU_T
SY-TITLE
Delivery 80015203 Change: Overview
SY-MSGTY
X
SY-MSGID
/SAPSLL/PLUGINR3
SY-MSGNO
002
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO
0
SY-DATUM
20081015
SY-UZEIT
063852
SY-XPROG
SAPLBPFC
SY-XFORM
CONVERSION_EXIT
Active Calls/Events
No. Ty. Program Include Line
Name
10 FUNCTION SAPLMBWL LMBWLU21 59
MB_POST_GOODS_MOVEMENT
9 FORM SAPMV50A FV50XF0B_BELEG_SICHERN 769
BELEG_SICHERN_POST
8 FORM SAPMV50A FV50XF0B_BELEG_SICHERN 86
BELEG_SICHERN_01
7 FORM SAPMV50A FV50XF0B_BELEG_SICHERN 16
BELEG_SICHERN
6 FORM SAPMV50A MV50AF0F_FCODE_SICH_OHNE_CHECK 10
FCODE_SICH_OHNE_CHECK
5 FORM SAPMV50A MV50AF0F_FCODE_WABU 11
FCODE_WABU
4 FORM SAPLV00F LV00FF0F 92
FCODE_BEARBEITEN
3 FUNCTION SAPLV00F LV00FU02 44
SCREEN_SEQUENCE_CONTROL
2 FORM SAPMV50A MV50AF0F_FCODE_BEARBEITEN 62
FCODE_BEARBEITEN
1 MODULE (PAI) SAPMV50A MV50AI0F 52
FCODE_BEARBEITEN
Chosen variables
Name
Val.
No. 10 Ty. FUNCTION
Name MB_POST_GOODS_MOVEMENT
XBLNR_SD
0080015203
3333333333
0080015203
0000000000
0000000000
EMKPF
000000000000000000 ##
2222222222333333333333333333222222222200222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
XMSSA[]
Table IT_589[0x196]
FUNCTION-POOL=MBWLDATA=XMSSA[]
Table reference: 307
TABH+ 0(20) = 00000000200D869300000000330100004D020000
TABH+ 20(20) = 00000000C4000000FFFFFFFF04090300E01B0000
TABH+ 40( 8) = 08000000C1108001
store = 0x00000000
ext1 = 0x200D8693
shmId = 0 (0x00000000)
id = 307 (0x33010000)
label = 589 (0x4D020000)
fill = 0 (0x00000000)
leng = 196 (0xC4000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000134
occu = 8 (0x08000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
shmTabhSet = Not allocated
id = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
shmVersId = Not allocated
shmRefCount = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = 0x00000000
collHook = 0x00000000
ext2 = 0xD80C8693
>>>>> 2nd level extension part <<<<<
tabhBack = 0x980C8693
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
RRESWK
22222222222
00000000000
00000000000
00000000000
%_SPACE
2
0
0
0
L_MEM_ID
MKPF-XBLNR
4454254445
DB06D82CE2
0000000000
0000000000
RSJOBINFO
00000000000000 ##
2222222222222222222222222222222233333333333333222222222222222222222222222222222200
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
RNAME
R
52222
20000
00000
00000
SCREEN
BT_UALL
4555444222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
24F51CC000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
IT_RSTRUCT
Table[initial]
XMKPF-XABLN
2222222222
0000000000
0000000000
0000000000
%_DUMMY$$
2222
0000
0000
0000
SYST-REPID
SAPLMBWL
5454445422222222222222222222222222222222
310CD27C00000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
ODM07M[]
Table[initial]
GT_GOCOMP
000000000000 #### 00000000000000
3333333333332222222222222222222222222222222222222222222220000222222222222223333333333333322222
000000000000000000000000000000000000000000000000000000000000C000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SY-SUBRC
4
0000
4000
L_ATPCB
22222
00000
00000
00000
XMKPF-MBLNR
4900035075
3333333333
4900035075
0000000000
0000000000
XMKPF-MJAHR
2008
3333
2008
0000
0000
BARCODE
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
T003
800WL49AMS XX XXXXXH
3335433445222222222222222222222222225522555554222222
8007C491D3000000000000000000000000008800888888000000
0000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000
KNVV
00000000 000
2222222222222222222222222222222223333333322222222222222222222233322222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
T064B
2222222222222222222222
0000000000000000000000
0000000000000000000000
0000000000000000000000
VGMSEG[]
Table[initial]
No. 9 Ty. FORM
Name BELEG_SICHERN_POST
MAT_AUF_HINWEIS_COPY
2
0
0
0
XLIKP[]
Table IT_392[1x2360]
PROGRAM=SAPMV50ADATA=XLIKP[]
Table reference: 197
TABH+ 0(20) = 082D1E94E0C8119300000000C500000088010000
TABH+ 20(20) = 01000000380900003000000004FC0100D0070000
TABH+ 40( 8) = 04000000C1108001
store = 0x082D1E94
ext1 = 0xE0C81193
shmId = 0 (0x00000000)
id = 197 (0xC5000000)
label = 392 (0x88010000)
fill = 1 (0x01000000)
leng = 2360 (0x38090000)
loop = 48 (0x30000000)
xtyp = TYPE#000027
occu = 4 (0x04000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x18081E94
pgHook = 0x00000000
idxPtr = 0x00000000
shmTabhSet = 0x00000000
id = 1541 (0x05060000)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 4 (0x04000000)
lineAlloc = 4 (0x04000000)
shmVersId = 0 (0x00000000)
shmRefCount = 1 (0x01000000)
>>>>> 1st level extension part <<<<<
regHook = 0xA87F1B94
collHook = 0x00000000
ext2 = 0x28940F93
>>>>> 2nd level extension part <<<<<
tabhBack = 0x70A22B93
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
XLIKP
8000080015203CUSER14 06580920081014 Z0011000LF X20081016200810152008101420081017200
3333333333333455453322222333333333333332222225333333344222533333333333333333333333333333333333
800008001520335352140000006580920081014000000A0011000C6000820081016200810152008101420081017200
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
<%_L195>
CVBAP
8000000012132000020T-AS301 T-AS301 0201 Su
3333333333333333333524533322222222222524533322222222222222222222222222222222222222233332222257
80000000121320000204D13301000000000004D1330100000000000000000000000000000000000000002010000035
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
MAT_AUF_HINWEIS_GEPRUEFT
2
0
0
0
<%_L195>-UPDKZ
UPDKZ_DELETE
D
4
4
0
0
IVBPA52_PAGIND
0.0.1.
000
00C
VBUK_KEIN_KREDITCHECK
2
0
0
0
XLIPS[]
Table IT_83[1x3552]
PROGRAM=SAPMV50ADATA=XLIPS[]
Table reference: 50
TABH+ 0(20) = E8F54D93F0282893000000003200000053000000
TABH+ 20(20) = 01000000E00D0000FFFFFFFF0400000080330000
TABH+ 40( 8) = 04000000C1108401
store = 0xE8F54D93
ext1 = 0xF0282893
shmId = 0 (0x00000000)
id = 50 (0x32000000)
label = 83 (0x53000000)
fill = 1 (0x01000000)
leng = 3552 (0xE00D0000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000260
occu = 4 (0x04000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0xD0896993
pgHook = 0x00000000
idxPtr = 0x00000000
shmTabhSet = 0x00000000
id = 410 (0x9A010000)
refCount = 1 (0x01000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 4 (0x04000000)
lineAlloc = 4 (0x04000000)
shmVersId = 0 (0x00000000)
shmRefCount = 2 (0x02000000)
>>>>> 1st level extension part <<<<<
regHook = 0xC8402493
collHook = 0x00000000
ext2 = 0x50E41293
>>>>> 2nd level extension part <<<<<
tabhBack = 0xC8532493
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
VBUK_KREDIT_NEUAUFBAU
2
0
0
0
LT_INB_CIFEXT
Table IT_2692[1x476]
PROGRAM=SAPMV50AFORM=BELEG_SICHERN_POSTDATA=LT_INB_CIFEXT
Table reference: 1104
TABH+ 0(20) = C095F993B8301E940000000050040000840A0000
TABH+ 20(20) = 01000000DC010000FFFFFFFF0400000090AC0100
TABH+ 40( 8) = 10000000C1308401
store = 0xC095F993
ext1 = 0xB8301E94
shmId = 0 (0x00000000)
id = 1104 (0x50040000)
label = 2692 (0x840A0000)
fill = 1 (0x01000000)
leng = 476 (0xDC010000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#002271
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0xF077F993
pgHook = 0x00000000
idxPtr = 0x00000000
shmTabhSet = 0x00000000
id = 1542 (0x06060000)
refCount = 1 (0x01000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x10000000)
lineAlloc = 16 (0x10000000)
shmVersId = 0 (0x00000000)
shmRefCount = 2 (0x02000000)
>>>>> 1st level extension part <<<<<
regHook = 0x00000000
collHook = 0x00000000
ext2 = 0x70E43294
>>>>> 2nd level extension part <<<<<
tabhBack = 0x70041E94
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
V50AGL-DISPLAY_FROM_ARCHIVE
2
0
0
0
XLIKP-VBELN
0080015203
3333333333
0080015203
0000000000
0000000000
EMKPF
4900035075200800000000000000 ##
3333333333333333333333333333222222222200222222222222222222222222222222222222222222222222222222
4900035075200800000000000000000000000010000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
VBMUE
2222222222222222222
0000000000000000000
0000000000000000000
0000000000000000000
VBSK
0000000000000000000000#### ####
2222222222222222222222222233333333333333333333330000222000022222222222222222222222222222222222
000000000000000000000000000000000000000000000000000C000000C00000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
PACKDATEN_VERBUCHEN
2
0
0
0
No. 8 Ty. FORM
Name BELEG_SICHERN_01
IF_FINAL_CHECK
2
0
0
0
LF_ONLY_FINAL
2
0
0
0
LF_ONLY_PREPARE
2
0
0
0
LF_FLAG_DOCNUM_NEW
2
0
0
0
CF_SUBRC
0
0000
0000
T683V
22222222222222222222222222222222222
00000000000000000000000000000000000
00000000000000000000000000000000000
00000000000000000000000000000000000
SY-XPROG
SAPLBPFC
5454454422222222222222222222222222222222
310C206300000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
IF_RENUMBER
X
5
8
0
0
SPACE
2
0
0
0
XVBPA_FIRSTIND
0.0.1.
000
00C
SY-REPID
SAPMV50A
5454533422222222222222222222222222222222
310D650100000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
IF_POST
X
5
8
0
0
SYST-REPID
SAPMV50A
5454533422222222222222222222222222222222
310D650100000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
XVBPA_AKTIND
0.0.1.
000
00C
No. 7 Ty. FORM
Name BELEG_SICHERN
%_DUMMY$$
2222
0000
0000
0000
IVBPA2KEY
000000
22333333
00000000
00000000
00000000
IV_FINAL_CHECK_DURCHFUEHREN
2
0
0
0
CHARX
X
5
8
0
0
LF_SUBRC
0
0000
0000
No. 6 Ty. FORM
Name FCODE_SICH_OHNE_CHECK
IVBPA1KEY
000000
33333322
00000000
00000000
00000000
T180-AKTYP
V
5
6
0
0
AKTYP-CREATE
H
4
8
0
0
CVBFA
000000 000000 #### #### 00000000000000 0
2222222222222333333222222222233333320000222000022222222333333333333332222222222222222222222223
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000C000000C00000000000000000000000000000000000000000000000
XSDCTRLFLAG
22
00
00
00
SYST
| ######################################T#######################################µ#########XP####
000000000000000000000000000000800000005000000000000000000000000000000000000010B0001000AF550000
0000100000000000000010601000104000000040006050407000000000000000000000000000C0500010300F800300
00000000000000000000000000000000000000000000000000000000000000000000000000000000000000AF000000
00000000000000000000000000000000000000000000000000000000000000000000000000000000000000BF00000C
GC_FCODE_PODCANC
ABBR
4445222222222222222222222222222222222222222222222222222222222222222222
1222000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
XSDCTRLFLAG-PROTSAVE
2
0
0
0
YES
X
5
8
0
0
GC_FCODE_PODQUIT
PODQ
5445222222222222222222222222222222222222222222222222222222222222222222
0F41000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
PROTOCOLCALLER-SDL
SDL
5442
34C0
0000
0000
GC_FCODE_PODSTOR
PODS
5445222222222222222222222222222222222222222222222222222222222222222222
0F43000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
LIKP-VBELN
0080015203
3333333333
0080015203
0000000000
0000000000
LIPS-POSNR
000010
333333
000010
000000
000000Hi
As soon as we have started to put things into UPDATE TASK, we must
54 ensure that errors definitely terminate the transaction.
55 MESSAGE A is not sufficient because it can be catched from
56 external callers which COMMIT WORK afterwards, resulting in
57 incomplete updates. Read note 385830 for the full story.
From the above message I think u need to read the not 385830 in tcode snote.
Thx. -
Material blocked due to a physical inventory - VL02N - Post Goods Issue
Hi,
We are working with SAP R/3 4.6C IDES.
During a business process we need to run VL02N and to click the Post Goods Issue button.
When we do that, we are getting the following error:
"Material P-103 1000 0001 blocked due to a physical inventory"
Anyone knows that I need to do in order to make it work?!
Also, anyone knows how can I add more quantity to a given part?
Thank you!
YanivHi Yaniv!
Any stock changes are forbidden during physical inventory (otherwise you wouldn't know, if your counting has amount of before or after the change).
Close the counting (-> ask who has done this), then goods issue is possible.
Quantity change: go to picking tab and enter 'real' -> changed quantity.
Regards,
Christian -
Post Goods Issue - error : Class type does not exist - Message no. VK662
Hi,
I am trying to do Post Goods Issue and getting this error: Class type does not exist
When double click on the error, it shows it is a message no vk662.
Any help to resolve it is appreciated. Thanks in advance.
-SriSri
There is a problem in batch determination.
The batch you assigned to the material does not have a class or if it has a class, that class does not exist.
Display the batch from the delivery item using MSC3N and go into the Classification tab. You should have a class of class type 22. See if that class exists in CL03 and its status in basic data tab. Work on these lines and revert.
Hope this helps. -
Hi Gurus,
In ECC 6.0 version in VL01N t.c. when i press "Post Goods Issue" button i confront following error;
Fld selectn for mvmt type 601 / acct 621000 differs for Settlement period (003)
Message no. M7093
Diagnosis
Comparison of the field selection strings from movement type 601 and G/L account 621000 has revealed that there is an incompatible field selection combination at one or more points.
Field for which the field selection is different: Settlement period
Example
On the movement type screen, a given field is a mandatory-entry field, whereas on the G/L account screen, the same field is suppressed.
System Response
You cannot post this transaction, unless you have changed the field selection adequately.
Procedure
Contact your system administrator.
Action to be taken by the system administrator
Check whether any postings resulting from this movement type are to be made to the G/L account determined automatically. If you find that the G/L account is not correct, check the automatic account determination in the Customizing system for valuation.
Proceed
If the G/L account is correct, use the report RM07CUFA to compare the field selection for the movement type with the field selection for the G/L account and change the incorrect settings or the field status group of the G/L account.
Proceed
I tried adviced actions but no any solution. Could you please guide me to solve the issue with step by step and reference t.c.
thanksCheck these threads where the same topic was discussed
[Re: Fld selectn for mvmt type 561 / acct 2005999 differs for Ext. GA amount in|Fld selectn for mvmt type 561 / acct 2005999 differs for Ext. GA amount in]
[Error while adjusting the Consignment Stocks |Re: Error while adjusting the Consignment Stocks]
thanks
G. Lakshmipathi -
Error during Post Goods Issue of Material in VL02N for STO Purchase Order
I am getting one error message during Post goods issue of Material for STO Purchase order.
I am doing the Post goods issue in T code VL02N
Error is " Account type D is not defined for Document type WL"
What is the settings required to be done.
Thanks,
ShailendraPlease check Plant customer master reconsilation account properly maintained or not in XD03 transaction.
-
VV501 error in Posting Goods Issue (VL02N)
Hi,
in VL02N when we try to "Post Goods Issue" sap gives the error "vv501 - Blocking error"
The error is like below:
Diagnosis
A system error occured during the attempt to block the material you are processing.
System Response
It can be assumed that problems exist in the system at the moment, which prevent proper processing. The whole transaction is therefore stopped.
Procedure
Please inform your system administrator as soon as possible.
Any suggestions ??
Edited by: Oguzhan Subasi on Oct 5, 2011 10:38 AMWhen i checked for SAP Note 78252 - Posting inventory difference: Blocking error, here is what writen in the note:
*& Title: MM07MFB9 *
FORM BUCHEN_INITIALISIEREN.
READ TABLE PREFETCH04 INDEX 1.
IF SY-SUBRC IS INITIAL. " delete
IF SY-SUBRC IS INITIAL AND INVENTUR IS INITIAL. " insert
CALL FUNCTION 'MB_PREREAD_MATERIAL_VALUES'
EXPORTING MBEQU = TCURM-MBEQU
TABLES PRE04 = PREFETCH04.
ENDIF.
ENDFORM.
when i look to the code, i cant see the codes that should be deleted according to that note. I see that another SAP note (316622) had been apllied. It is ilke below:
IF MBVAL IS INITIAL.
DATA: XLOCK. "note 316622
IF NOT XMBWL IS INITIAL AND XLOCK_ALLP IS INITIAL. "note 316622
"No lock on EM07W because lock already exists "note 316622
XLOCK = X. "note 316622
ELSE. "note 316622
"Lock EM07MW in exclusive mode "note 316622
CLEAR XLOCK. "note 316622
ENDIF. "note 316622
CALL FUNCTION 'MB_PREREAD_MATERIAL_VALUES'
EXPORTING
MBEQU = TCURM-MBEQU
XONLY = XLOCK "note 316622
TABLES
PRE04 = PREFETCH04
PRE21 = PREFETCH21
* pre22 = prefetch22. "kaz
PRE22 = PREFETCH22 "kaz
PRE29 = PREFETCH29 "kaz
IT_ENQUEUE_EXCEPTION = LT_ENQUEUE_EXCEPTIONS. "396879
Should i insert the line ? -
Goods picking and Post goods issue in VL02N
Dear All,
Am hving problem in Picking goods and Post goods issue.
This is for the Stock Transport Order with Delivery via Shipping
Supplying plant is 1000(SAP std,sloc 0001) and Receiving plant 1100(sloc 0001).
Sales org:1000
Distrbn Chnnl:10
Division:00
1.maintained matrial for both the plants.
2.Creted STO by using DOC type as "UB" and item cat "U".
3.And getting the Shipping data for the material in the STO.as shipping point is 1000.
saved the Po.
4.After that i done the GR w/o PO for the material using Mvt type 501.
5.Then,VL10B creating Delivery doc.n this is also created.
6.but when i do the picking and PGI in VL02N there picking field is greyed out bt i have tried to mangae that when i give the picking Qty in the picking qty field system is throwing the following error.
<b>Item to be picked by WM (picking quantity cannot be entered)
Message no. VL118
Diagnosis
For this item, picking is carried out using warehouse management transfer orders since the material is stored in a warehouse with random storage.
System Response
The system does not allow you to enter a picking quantity manually. The picking quantity is copied automatically into the delivery during the creation of the corresponding transfer order.</b>
is any data missed by me while doing this process?
pls let me know n help me in this regrds
Thank you allHi Vijay
By changing storage location you could do b'coz the new storage location is not maintained with warehouse, hence no need to perform warehouse transactions (TO creation and confirmation) before inventory mgmt transactions (PGI).
For trying pick up with WH, first u should have enough stocks in approppriate storage bins and u should perform pick up by creation of TO and confirmation.
warm regards
sairam akundi -
Error during Post Goods Issue of delivery
Hello SD experts,
I have an URGENT problem where users at a particular plant have problems in posting goods issue. I happened last Thursday and I desparately need solution before month end for closing activities.
System would send error msg " All HIM materials require quantity conversion. Maintain item 000010". Transaction code used are VL06O and VL02N. Msg no: 03 012.
Diagnosis
There is an item for the delivery that has not been fully processed. The
quantity conversion calculation has not been made. HIM (Hydrocarbon
Inventory Management) materials require that all quantities for all
units of measure defined in the unit of measure group are calculated by
the QCI (Quantity Conversion Interface).
The problem is, there's no problems in posting the particular material form the same plant before this. When I took a look at the Delivery document, I noticed the "Qty in alt UoM" tab in the Item Details screen is blank whereas there should have data in it. I believe these data is automatically derived from master data. Hence, I suspect the Goods issue problem is due to the missing data .
This problem only happens in one plant, for one material whereas this material is active in many other plants.
Anyone of you guys had the same problem and can share the solution with me?
HELP!!
SurianaPlease check Plant customer master reconsilation account properly maintained or not in XD03 transaction.
-
Change Moving Average Price when Post Goods issue posted from VL02N
Hi all,
Please help me to find USER EXIT / BADI or Enhancement to change Price - MSEG-DMBTR
when Post Goods Issue posted from transaction VL02N.
Thanks in advance,
Mila.Hi,
Check these Enhancemnts...
Exit Name Description
V02V0001 Sales area determination for stock transport order
V02V0002 User exit for storage location determination
V02V0003 User exit for gate + matl staging area determination (headr)
V02V0004 User Exit for Staging Area Determination (Item)
V50PSTAT Delivery: Item Status Calculation
V50Q0001 Delivery Monitor: User Exits for Filling Display Fields
V50R0001 Collective processing for delivery creation
V50R0002 Collective processing for delivery creation
V50R0004 Calculation of Stock for POs for Shipping Due Date List
V50S0001 User Exits for Delivery Processing
V53C0001 Rough workload calculation in time per item
V53C0002 W&S: RWE enhancement - shipping material type/time slot
V53W0001 User exits for creating picking waves
VMDE0001 Shipping Interface: Error Handling - Inbound IDoc
VMDE0002 Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0003 Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0004 Shipping Interface: Message SDPACK (Packing, Inbound)
Badi Name Description
DELIVERY_ADDR_SAP Determine Time-Dependent Delivery Address in Delivery
DELIVERY_PUBLISH Returns BAdI Implementation: Automatic GR Posting T 2
DELIVERY_PUBLISH Updating of Delivery in Purchase Order
DELIVERY_PUBLISH AIP: Delivery Confirmation for Sales Order
Regards
Raghu -
Changing the field content of 'wrbtr' in accounting document during Post Goods Issue in VL02N
Hi Experts,
I have requirement ,where I need to change the 'amount in document currency value (wrbtr)' in line item of a accounting document, which is created as part Post Goods issue through VL02N.
I have already check BADI's below as follows:-.
1) LE_SHP_GOODSMOVEMENT- No accounting document information flows in this BADI.
2) AC_DOCUMENT - Field 'WRBTR' is not available in substitutable fields list.
3) BTE-1050 - This BTE is not getting triggered while doing PGI.
Please suggest any other possibilities to make the change.
Thanks & Regards,
Suganth.Hi Kartik,
I have checked the enhancement you specified, but it didn't trigger during PGI. Can u please let me know is there any other possibilities to make the change.
Thanks
Suganth. -
Error message while posting goods issue.
Hi,
Please help me with the following problem..
I have created Sales Order, Delivery & also created the Transfer Order number. After creating Transfer ordering, while submitting post goods issue, when I click on PGI, I get
"Posting only available for period 2002/10 to 2002/11"...
As a resulf of the above, I am not able to complete Billing for all the sales orders I have created.
Can somebody please help me with above?
Regards
NadeemUse the MMPV transaction to check your current period. Since you have transactions already done you need to do closing for every month.
If you are on an IDES system for training purposes you can do a fast transaction by removing the plant assignment from the company code. The use the MMPI transaction to set your current period. Remmber April is period 1 if you are are using the indian financial year and fiscal year variant k4.
Then reassign the plant and now try posting It will allow you. But a word of caution. Never attempt to remove the plant asignment in the development system. It might cause errors. for that there is a separate note.
regards
Jude -
Inter Company -Error in Post Goods Issue
Dear Experts,
I have developed new intercompany process between selling company & supplying company to customer. I have created sales order and delivery order. After delivery, am able to to PGI. If i check the Post goods issue document number accounting documents, supposed to take 0020 (selling company code) but its taking some different company conde. we never user that company code for intercompany scenarion. Vould you please tell me...why its taking different company code and how its taking wat we have to do. pls suggest me. and let me know what are the steps involved during PGI (bcoz PGI accounting entries are automatic)
Thanks & RegardsDear Murali,
I have checked as per ur suggestions, every things is correct but why it is asking different company code. Actualy our intercompany process between 0010 to 0020. 0010 is the supplying company and 0020 is the selling company. i have assigned 0020 s.org to 0020....config side everything is ok ...i never maintain 0315...but when am doing PGI its getting error
No accts maintained for company code clearing between comp.cds 0010 and 0315.
Menas here for acoount clearing between 2 company codes its taking another company code istead of 0020. If its take 0020 i wont get help bcoz we maintained account clearing between 2 company codes.
Please suggest me
Thanks & regards
VS -
Post goods Issue ,in VL02n
Hi friends ,
I am trying to post Goods issue from delivery order,through VL02n .I tried using BAPI_GOODSMVT_CREATE but it returns the message 'Goods Movement not possible with mvmt type 645'.
I saw in some of the threads about this BAPI ,BAPI_OUTB_DELIVERY_CONFIRM_DEC .Can i achive the same functionality .Please suggest me which parameters should be passed into the BAPI.
The BAPI should return me the material document number generated from VL02n ,i mean after posting the goods issue .
Regards ,
Hemanth Nugur .Hi
"I am trying to post Goods issue from delivery order,through VL02n"
If you want to do it inside VL02N transaction, you already a PGI button, just click on that, PGI will be done
Regards
MD -
VL02N : when I do Post Goods Issue in VL02N, I want to change amount.
hello, everyone.
I have a problem. I need your help.
To explain, when I tranfer a material from A plant to B plant,
first, I create Stock tranfer order( ME21N ).
And I create Delivery document ( VL10B ) with po number.
And I click "Post Goods Issue" in VL02N.
Just at that moment, I want to change the line item amount in the local currency.
because, the line item amount in the local currency is calculated as the move average price of the A plant.
I want to calculate as the move average price of the B plant.
I looked arount too much, but I couldn't find how to change.
You can help me. I hope so. Anything is good.
Please, let me know in detail.
Thanks for reading.
Edited by: Hyun-Sun Choi on Feb 15, 2012 5:44 AMThank you for your answer.
This is the return process.
Just I want to input value in amount in LC.
and I fount badi in LE module.
Again thank you.
Maybe you are looking for
-
Help!! Problem in XML Functions!!!!
hi: everyone!! when i use the xml functions deletexml, insertxmlbefore, appendchildxml, insertchildxml to update the xml. i get a error:ORA-19039: Keyword DELETEXML reserved for future use. here is my query string:update xml_table set xpo=deletexml(x
-
Apple tv not restoring error code 38
So i have tried abouut 100 times now restoring my apple tv. I was prompted to download the new software. I tried and then it said to plug it in to itunes. So I did that and hit restore. It goes through the whole process bt when it gets to verify it g
-
Performance problem on free chacteristics
Hi Friends, We are getting performance problem with some of our BW Reports. When we run BW web reports. Intial Screen of the report is OK. when we do filtering on some free characteristics, It is taking ages to filter. this is only for some Free char
-
fair kop. so if i change custRefNum from an int to a string?
-
Problem if i use web.xml
hi, i am developing a project using servlets and jsp's, i am using JSTL for the jsp pages (c.tld) but it is not working if there is web.xml file with out this it is working fine i dont know what exacltly the problem plzz xove this problem cheers, Ale