VL02N : when I do Post Goods Issue in VL02N, I want to change amount.

hello, everyone.
I have a problem. I need your help.
To explain, when I tranfer a material from A plant to B plant,
first, I create Stock tranfer order( ME21N ).
And I create Delivery document ( VL10B ) with po number.
And I click "Post Goods Issue" in VL02N.
Just at that moment, I want to change the line item amount in the local currency.
because, the line item amount in the local currency is calculated as the move average price of the A plant.
I want to calculate as the move average price of the B plant.
I looked arount too much, but I couldn't find how to change.
You can help me. I hope so. Anything is good.
Please, let me know in detail.
Thanks for reading.
Edited by: Hyun-Sun Choi on Feb 15, 2012 5:44 AM

Thank you for your answer.
This is the return process.
Just I want to input value in amount in LC.
and I fount badi in LE module.
Again thank you.

Similar Messages

Changing the field content of 'wrbtr' in accounting document during Post Goods Issue in VL02N

Hi Experts,
     I have requirement ,where I need to change the 'amount in document currency value (wrbtr)' in line item of a accounting document, which is created as part Post Goods issue through VL02N.
          I have already check BADI's below as follows:-.
1) LE_SHP_GOODSMOVEMENT- No accounting document information flows in this BADI.
2) AC_DOCUMENT - Field 'WRBTR' is not available in substitutable fields list.
3) BTE-1050 - This BTE is not getting triggered while doing PGI.
        Please suggest any other possibilities to make the change.
Thanks & Regards,
Suganth.

Hi Kartik,
            I have checked the enhancement you specified, but it didn't trigger during PGI. Can u please let me know is there any other possibilities to make the change.
Thanks
Suganth.

Table to find posted goods issue of vl02n

Hi all,
After perform the post good issue on vl02n, SAP suppose to update the posted goods issue into a table. So may i know which table to find the posted goods issue record ?
Regards,
Marcus

Hi,
VBUK is the header tables, you need to refer to VBUP for the item details.
Table VBFA contains the document flow, where fields VBELV contains the previous document no. & VBELN contains the subsequent document.
So for your need, you can refer to VBUP, VBELN would be the outbound document number, also the movement type would be 601.
Revert if you face any issues.
Regards,
Vivek

Goods picking and Post goods issue in VL02N

Dear All,
Am hving problem in Picking goods and Post goods issue.
This is for the Stock Transport Order with Delivery via Shipping
Supplying plant is 1000(SAP std,sloc 0001) and Receiving plant 1100(sloc 0001).
Sales org:1000
Distrbn Chnnl:10
Division:00
1.maintained matrial for both the plants.
2.Creted STO by using DOC type as "UB" and item cat "U".
3.And getting the Shipping data for the material in the STO.as shipping point is 1000.
saved the Po.
4.After that i done the GR w/o PO for the material using Mvt type 501.
5.Then,VL10B creating Delivery doc.n this is also created.
6.but when i do the picking and PGI in VL02N there picking field is greyed out bt i have tried to mangae that when i give the picking Qty in the picking qty field system is throwing the following error.
<b>Item to be picked by WM (picking quantity cannot be entered)
Message no. VL118
Diagnosis
For this item, picking is carried out using warehouse management transfer orders since the material is stored in a warehouse with random storage.
System Response
The system does not allow you to enter a picking quantity manually. The picking quantity is copied automatically into the delivery during the creation of the corresponding transfer order.</b>
is any data missed by me while doing this process?
pls let me know n help me in this regrds
Thank you all

Hi Vijay
By changing storage location you could do b'coz the new storage location is not maintained with warehouse, hence no need to perform warehouse transactions (TO creation and confirmation) before inventory mgmt transactions (PGI).
For trying pick up with WH, first u should have enough stocks in approppriate storage bins and u should perform pick up by creation of TO and confirmation.
warm regards
sairam akundi

Post goods Issue ,in VL02n

Hi friends ,
I am trying to post Goods issue from delivery order,through VL02n .I tried using BAPI_GOODSMVT_CREATE but it returns the message 'Goods Movement not possible with mvmt type 645'.
I saw in some of the threads about this BAPI ,BAPI_OUTB_DELIVERY_CONFIRM_DEC .Can i achive the same functionality .Please suggest me which parameters should be passed into the BAPI.
The BAPI should return me the material document number generated from VL02n ,i mean after posting the goods issue .
Regards ,
Hemanth Nugur .

Hi
"I am trying to post Goods issue from delivery order,through VL02n"
If you want to do it inside VL02N transaction, you already a PGI button, just click on that, PGI will be done
Regards
MD

Locking problem in VL02N at the time Post Goods issue

Hi,
We have implemented 2 BADIs to change qty in delivery and in subsequent documents. Once we receive an IDoc with batches, then we need to change subitems qty according to no of batches.
Once IDoc has updated, then PGI will do automatically.
1. LE_SHP_DELIVERY_PROC - Change qty in delivery (Method SAVE_DOCUMENT_PREPARE)
2. LE_SHP_GOODSMOVEMENT - Change qty in material document.
Now, we have a locking problem at the time of posting.
Please let us know, due to these BADI implementation this problem or any other cause? And provide required to solve this problem.

hi ,
do i need to do step 2....?
i dont think u need step2 ( change qty of MBLNR),bcos ,
say ur Del.qty is 100, now u want to do del. of 50, then just u will change its qty & do PGI ? so whats the need of changing MBLNR.
while doing PGI , program will take changed qty of del. only ?
let me know if i'm wrong.
regards
Prabhu

Check material cost when post goods issue

Hi,
When i click the post goods issue in VL02N, I would like to check if the cost of mateial is equal to zero. If it is zero, I would like to stop the transaction with a error message.
But in the user exit, I cannot find which field provide the material cost. Can any one help me?
Many Thanks
Jean

Dear Jean,
Good morning and greetings,
In the movement type config make the accounting as mandatory and would surely meet your requirement. Maintain that in the transaction code OMJJ for the Accounting Control to Movement Type as + which is required entry. The system would throw an error if no accounting entry is generated.
Hope this meets your requirement
Please reward points if found useful.
Thanking you
With kindest regards
Ramesh Padmanabhan

VL02N:Post Goods Issue Error: PXA_NO_FREE_SPACE

Hi gurus,
i am testing post goods issue under vl02n after posting&delivering a sales order with type OR. the ' PXA_NO_FREE_SPACE' error occured after my clicking post good issue.
PFB the error log, can anyone help to solve it out. TIA.
    No PXA storage space available at the moment.
What happened?
    The current ABAP/4 program had to be terminated because there
    was no space available to load it.
    Each ABAP/4 program to be executed is stored in a central
    storage area that is divided between all users.
    This area was too small to hold all currently active programs for all
    users.
    Resource bottleneck
    The current program "SAPMV50A" had to be terminated because
    a capacity limit has been reached.
What can you do?
    Since this could have resulted in a temporary bottleneck, you should
    try to restart the program.
    Ask your system administrator to increase the size of the area (PXA)
    used to store the ABAP/4 programs.
    Note which actions and input led to the error.
    For further help in handling the problem, contact your SAP administrator
    You can use the ABAP dump analysis transaction ST22 to view and manage
    termination messages, in particular for long term reference.
Error analysis
    Unable to load a program of 1048576 bytes.
    The PXA ('program execution area') was too small to hold all
    currently active programs for all users.
    At present, the size of the PXA is set at 144868 Kbytes.
    The largest contiguous and unlocked memory chunk has 1014784 bytes.
How to correct the error
    The current size of the PXA was set at 144868 kilobytes.
    You can increase or decrease the PXA in the SAP profile. When
    doing this, please refer to the relevent instructions in the
    installation manual.
    You can use the utility program 'ipclimits' to display the
    available system resources.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "PXA_NO_FREE_SPACE" " "
    "SAPMV50A" or "FV50XF0B_BELEG_SICHERN"
    "BELEG_SICHERN_POST"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
any reponses will be awarded,
regards,
samson

Check these links where the same issue was discussed
[PXA_NO_FREE_SPACE|http://www.sapfans.com/forums/viewtopic.php?f=12&t=304020&p=917783]
[PXA_NO_FREE_SPACE Error|http://sap.ittoolbox.com/groups/technical-functional/sap-basis/pxa_no_free_space-error-858115]
thanks
G. Lakshmipathi

Update termination error when posting goods issue

Helllo
I have a strange problem I can not figure out. We have serial numbers like 12345/345. When trying to post goods issue I get an update termination error for invalid character. This only happens if the quantity is more than 1 each. A quantity of 1 each works fine and receives no update termination when post goods issue...only recieve termination error if the post goods issue is for a qty of 2 each.
I searched the SAP site found OSS note 40355...applied the note. The note also mentions the chaging print paramters to include "/ _" this is all done.
I tried doing a ABAP Debug in SE38 (for the delivery note print program) and setting the breaking point, but when I go to run the transaction after the setting break point...when I hit post goods issue...SE38 does not return back to its screen. So not sure if I am running the correct program there...or if this works for the update terminations?
So strange I do not get this for a qty of one each only when it is greater than that. I am stumped need help....
Any advice wiould be GREATLY appreciated....

Looks like there is an error in the delivery (or material movement ?) print program. Easiest would be to disable these outputs for test purposes. When no dump then the error is somewhere in the print program an could be analysed by triggering the print separately with ABAP RSNAST00.
regards Jack

USER-EXIT for post goods issue

Hi all,
after the delivery (VL01n)is created, i have to go for post goods issue.there is a push button named 'post goods issue' in VL02n.
when i will press this button,all my data for this delivery ,should be downloaded to a text file.
for this thing, i want to use a USER-EXIT.can u plz advice me the correct & specific user-exit for this requirement.it is very urgent. i have to it by today.
your help is highly appreaciated.
Regards
pabitra

Check the following
V02V0001            Sales area determination for stock transport order
V02V0002            User exit for storage location determination
V02V0003            User exit for gate + matl staging area determination (h
V02V0004            User Exit for Staging Area Determination (Item)
V50PSTAT            Delivery: Item Status Calculation
V50Q0001            Delivery Monitor: User Exits for Filling Display Fields
V50R0001            Collective processing for delivery creation
V50R0002            Collective processing for delivery creation
V50R0004            Calculation of stock for POs for shipping due date list
V50S0001            User Exits for Delivery Processing
V53C0001            Rough workload calculation in time per item
V53C0002            W&S: RWE enhancement - shipping material type/time slot
V53W0001            User exits for creating picking waves
VMDE0001            Shipping Interface: Error Handling - Inbound IDoc
VMDE0002            Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0003            Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0004            Shipping Interface: Message SDPACK (Packing, Inbound)
Regards

Can not "post goods issue" against Vendor Return PO.

Hello Friends,
**I have a problem During the "Vendor Return Through Purchase Order" Process.I crated a PO with return flag set.**
**Then 1) Created a outbound delivery against purchase order (VL10B)**
2) Created a Billing (VF01)**
3) Next is VL02N - While doing the "post goods issue" where i got following error message "Update control of movement type is incorrect (entry 161 X X _ L)"**
Its shows setting related to Mvt 161 to update .I check allowed transaction with respect to 161....VL02N is there .....But don't understand what change needed in "Update control /WM movement type is needed.....Pls suggest any solution........Thanx**
Regards
Sachin
*Error Messafe -
Update control of movement type is incorrect (entry 161 X X _ L)
Message no. M7226
Diagnosis
The system could not find entry 161 X X _ L in any of the movement type control tables.
Procedure
Cancel current processing.
Contact your system administrator.
Action to be taken by the system administrator
Check in Customizing for Inventory Management under Copy, Change Movement Types whether the entry is contained in the Update control view for the movement type.
If the entry is missing, proceed as follows:
For standard movement types, this means that the given process is not supported using the present data combination. Do not create any entries without prior arrangement with your SAP consultant. Otherwise, incorrect postings may result.
For customer-defined movement types (beginning with 9, X, Y, or Z), this may mean that they have not been fully defined. Delete the movement type and re-create it by copying a standard movement type.

Hi Antony,
Thanx for reply.
1) I had assign delivery Type (RL -Returns Purchase order) to my document type. Assingnment of delivery type thru
spro>MM->purchasing>purchase order->set up stock transport order--->assign delivery type and checking rule....
2) MvT - 161----If i modify 161 wrt to GR Returns what modification is needed ? ......
3) VOV6 - I had checked it ,maintain it, but that is not relavant in my case....
4) During PGI system pick 161 as defalult MvT.....can we change it t0 122 ? but how...??
still the problem is there......
Sachin

POST GOODS ISSUE in Delivery Order

Dear Friends:
After going to Delivery Order,Vl02n, I clicked on Post Goods Issue and I am getting this error.
Delivery has not yet been completely processed by WM.
Delivery has not yet been put away / picked (completely)
How to Overcome this problem?
All the help will be greatly apprecaited.
Thanks

Hi,
What it is telling you is:
Delivery Note first need to be picked. If the storage location used in DN# is of WM managed, (you may verify this in the picking tab of the delivery itself.)....It would show WM relevant and not yet picked as statuses in this tab.
You need to create Transfer Order (TO) pick list for this delivery.
Do it from LT03.
Enter the warehouse number that you would see for this delivery in its picking details in the item.
Enter delivery note.
Hit enter and if everything works fine for you and if you are familiar with WM TO creation, you will be able to create TO and if not setup for auto confirmation, you can do it from LT12.
Once you do these steps, you can do the PGI.
Regards

Change BSEG-ZUONR during the Post Goods issue.

Hi
We wanted to Update the BSEG-ZUONR with sales Order no( traverse back to the Original SO during reversal) ( Basically Assignment field (ZUONR) in the Accounting side) after performing the Post Goods issue USING TRANSACTION VL02N.
Is there any user exit which can allow us to update the accounting field ( ZUONR) during the post goods issue ( Tcode VL02N)?
Thanks a lot.

Hi,
you can achieve this using the concept of validation and substitution rules in FI (Check transaction OB28) or below help
http://help.sap.com/saphelp_erp60_sp/helpdata/en/27/06e23954d9035de10000000a114084/content.htm
Hope this helps
Regards
Shiva

BAPI for Picking and Post Goods Issue ?

Hi All,
Is there any BAPI for doing Picking and Post Goods Issue in VL02N ? I don't think we can use BAPI_OUTB_DELIVERY_CHANGE.
Is it advisable to use BAPI or BDC ( if no BAPI exist ). Thanks in Advance.

BAPI for picking in VL02N
BAPI_OUTB_DELIVERY_SAVEREPLICA
BAPI for posting Goods Issue
BAPI_OUTB_DELIVERY_CONFIRM_DEC
For reference: http://help.sap.com/printdocu/core/Print46c/EN/data/pdf/LEIDW/LEIDW.pdf

Posting goods issue using Message type SHPCON and idoc type DELVRY03

Hi SAP Gurus,
I am using message type SHPCON and idoc type DELVRY01 with processing code DELV to post goods issue for a delivery note.
I tried to simulate the inbound entry via WE19. The scenario should be posting goods issue based on the delivery order.
In some cases, quantity issued is less than the quantity in the DO. For this, I need to change the delv quantity in the DO via VL02N before I select Post goods issue button. This will change at the same time post the goods issue.
What I have filled up are the fields:
E1EDL20-VBELN = DO num
E1EDL20-VSTEL = Plant
E1EDL18-QUALF = "PGI"
E1EDTH13-QUALF = "006"
E1EDTH13-NTANF = date today
E1EDL24-POSNR = 000010
E1EDL24-MATNR = material num
E1EDL24-WERKS = delv plant
E1EDL24-LGORT = sloc
E1EDL24-LFIMG = updated quantity
But everytime I simulate using WE19, the entire quantity in the DO is not changed at all. The goods issue quantity posted is still the original DO quantity.
May I know how to do this? Thanks.

Put value in E1EDL24-LGMNG for qty to pgi.

VL02N : when I do Post Goods Issue in VL02N, I want to change amount.

Similar Messages

Maybe you are looking for