VL06I - GR - Not tied to LT06 - TO creation for Material Document

Hi,
When I do GR from VL06I report for Inbound deliveries, it does not take me to LT06 - TO creation with respect to Material Document after GR posted.
Basically it takes to VL32N screen during GR posting.
Manually when I do GR using Tcode VL32N - takes me to LT06 for TO creation, after GR posted.
Any config needs to be done?
Please advice.
Thanks in advance.
Rajesh

Hi,
Thanks for the reply.
I am using - VL06I report, secondly Delivery Status Overall Putaway Status - Not for Putaway, OverallWM Status - No WM trns Ord reqd for the Inbound Delivery created (PGR not done).
Thanks,
Rajesh

Similar Messages

  • Creation of Material Documents With Mvt Type

    On Performing Post Goods Issue (PGI) in one Plant in case of Plant to Plant Dispatches, there should be Inbound delivery created for already created Purchase Order (PO). In addition after creation of inbound delivery, there should be material document created with 103 movement. This Material document is triggered when the inbound delivery is saved. Once Warehouse processes are finished, then Post Goods Receipt (PGR) happens, so 101 Movement Type happens for Purchase Order. PGR document should trigger one more material document with 104 movements; this document is reversal for material document with 103 movement type.
    can any one suggest to enhance SAP for this?
    Moderator message : Requirements dumping is not allowed, show the work you have already done. Thread locked.
    Edited by: Vinod Kumar on Oct 21, 2011 5:18 PM

    Hi Nitin,
    Before creating the Service type of product, you have to define the Base category for Service type product. Generally the category for service will be created under the R3 hierarchy R3PRODSTYPE. You can create this category using the TCode:
    COMM_HIERARCHY. Here you have to select the product type as Service and have to assign the set types to the category.
    You can create a service product using the transaction : COMMPR01 -> Click on Service ICON -> Select the Category for Service Type. Then fill in the details for Service Product description, Service ID(Based on number range settings for products), Language.
    Also fill other details like Base Unit of measure, Pricing condition for different sales areas for the service product.
    Since you are using CRM7.0, you can do all these activities using a POWER USER role.
    For more information about Set types and hierarchies please refer the following help link:
    http://help.sap.com/saphelp_crm70/helpdata/EN/46/57672501a208e7e10000000a114a6b/frameset.htm
    Hope this helps!
    Regards,
    Chethan

  • Creation of material Documents for RMPM adjustments using BAPI

    Hi
    can any one help me Creation of material Documents for RMPM adjustments using BAPI...
    i should be grateful to you...
    advance thank you
    with regards
    venkat

    You can check MB_CREATE_GOODS_MOVEMENT which has mkpf as inporting parameter.

  • Not possible to determine shipping data for material  in PO(STO)

    I
    m doing STO for intra copmany code(plant to plant stock transfer),I have done all STO setting ,maintain material with plant and storage condition,loading groups , maintain customer with storage condition,created vendor with supplying plant.setting is done for supplying plant and receiving plant .
    Supplying and receiving plant combination with document type UB.delivery type NL and checking rule RP.Also maintain sales area for both plant.
    But when I m creating PO in ME21N below error is showing..
    *Not possible to determine shipping data for material ,kindly suggest if I have missed any setting...
    Regards,
    Vipin

    Hi Sharan,
    Thanks for your reply.
    problem got solved but in different way ,STO setting was wrong.
    I didn't maintain delivery document type(NL) on plant level  It was maintain at storage location that's why system couldn't determine shipping info for material.
    Please check the setting below.
    IMG> MM>Purchasing>Purchase order>STO>STO between storage location>set up storage location -dependent shipping point determination>define rule for determination of sipping point>
    here we have to set delivery document type(NL) to plant specific shipping point determination.

  • BAPI for creation of material documents/movements

    Hi Everebody:
    I need some help regarding to bapis for the creation of mateial documents and/or movements. I have been trying to implement bapi BAPI_GOODSMVT_CREATE, but this bapi does not have (import) the posting time in document, which is very important for my porpuse.
    So, I would appretiate a lot any information anybody could give about any bapi I could use to create material documents or material movements but incluidng the posting time in document (field MKPF-OIB_BLTIME).
    Regards

    You can check MB_CREATE_GOODS_MOVEMENT which has mkpf as inporting parameter.

  • Need info on badi or exit before creation of Material document number?

    hi experts,
    we have two systems one is general R/3(4.6 C) and another system is GTS (NW 2004)system.
    while creation of GR a check from R/3 is made to GTS through GTS plug in installed in R/3
    and after which the document number is created...
    now i need a BADI between the check is made in GTS and material document no. creation
    where i can throw a message by checking in R/3 LFA1 table whether the vendor is SPL check or not.
    for this i am using MB_DOCUMENT_BADI and the method is MB_DOCUMENT_BEFORE_UPDATE
    where i am querying the zfields from LFA1(R?3) for SPL check happened in GTS (this is updated in some other interface)
    if in this badi if any error message is populated it is directly going for dump..
    please suggest me what can i do..
    Thanks in advance
    S.Janagar

    problem solved by myselves.
    by using popup to inform function module i am able to throw error message
    Edited by: Janagar Sundaramoorthy Nadar on Nov 19, 2009 7:01 PM

  • Creation of TO for Material Document

    Hi All,
    I am doing an initial stock entry  into the storage location using MB1C Txn Code and movement type 561.This storage location is attached to a warehouse also.After creating the material Document, i am trying to create a Transfer order using LT06 Txn code, but system is throwing an error saying "You have not selected any data for the material document 4900000062".
    Request your kind help in resolving the issue.Believe me, your help will be rewarded.
    Regards
    Krishna

    HI
    Its not possible to create transfer orders for the material document created during initial entry of stocks 561, the moment you post initial entry though 561 the stock would be placed in 998 storage type, you have to go to LT10 tranascation from there you have to move the stock to relavna storage type.
    Cheers
    Srinivas

  • Help required:Spool Creation for posted document in FB03 transaction

    Hi Experts,
    The requirement is like I have to send the PDF document to the user by mail once the document gets posted in SAP ECC. The posting is taking place by IDOC.
    The problem is how do i get the spool request for the document which is posted in ECC. It can be seen by entering document number in FB03 transaction but there is no smart form or SAP script or any Output type. The document is posted by IDOC.The client wants the PDF document excatly as seen from FB03 transaction. Please help as this is typical requirement i have never come across.
    Do let me know some of the user exits where in just after the posting i can write my code for spool creation. The idoc is using the BAPI_ACC_DOCUMENT_POST.

    HI
    In test mode i am able to view the document no. but not the reference document no and when double click on the document no i am not able to view the journal entry.
    Thanks.

  • Creation of material document number.

    Hi All,
    In the MIGO transaction, for a Goods receipt order, the transaction is calling MB_CREATE_GOODS_MOVEMENT and MB_POST_GOODS_MOVEMENT to create a material document and returns material document number.
    I have created a new program that is using only the above two FMs and want to create the material document. But this thing is not working.
    I am passing all the parameters, which the FM takes when called from MIGO transaction. It is giving me a material document number which is not tracable for the current posting data in any of the tables.
    Also please tell me in which table can I get the details for the material document number other than AUFM and MSEG.
    help will be rewarded.
    regards.

    problem solved by myselves.
    by using popup to inform function module i am able to throw error message
    Edited by: Janagar Sundaramoorthy Nadar on Nov 19, 2009 7:01 PM

  • Not possible to determine shipping data for material in intra company STO

    Hi,
    just trying to set up a STO material movement between two plants belonging to same company code,sto customization is done,i have chosen raw material whose stock got maintained in both plants........when trying to post it gives an error message ....NOT POSSIBLE TO DETERMINE SHIPPING DATA FOR THE MATERIAL...COULD SOME ONE HELP ME...

    SPRO->Material Management->purchasing->scheduling Agreement->Setup Stock transport scheduling Agreement->Define shipping data for plants.
    Select the particular plant and click on details there also you have to maintain the same customer that you have maintained in J1ID.
    Then it will allow to create Stock transport order.
    I did the same thing it was working for me.
    Edited by: Vanitha Krishnamurthy on Jul 27, 2010 12:07 PM

  • Can not see warehouse management data screens for material while extending.

    I want to extend material for warehouse managment views.I can not see these views for the material in MM01.Looks like this is some thing to do with material type configuration.Can some one assist me how to do this?

    1)Check whether the material exist for that plant and storage location which is assigned to warehouse number .
    spro->enterprise structure->assignment->logistic execution->assign warehouse number to plant/sloc.
    2) Check in OMS2 tcode in the material type setting WM view is selected.

  • Tax not appearing in accounting doc wrt a material document

    Hi All,
    In one material doc's accounting doc, tax lines are not appearing. I wanted to know how the system picks up the tax code for a material doc posting. Here the posting is an inventory posting.
    Regards
    Rudra

    Basically there has been no tax calculation for an Accounting doc .User wants to know why so?
    He is telling why the tax lines are not appearing. As stated above, its a material doc which when posted,
    generated the stated accounting doc.The movt type is 702.
    Please let me know why there has been no tax line items in the accounting doc.

  • Classification Data Creation for Material Master Record

    Hi all.
    I've a batch that update material master record with a Bapi "Bapi_material_savedata". After Material creation or changing we also need to insert or to change a classification data in the classification view of the material master record.
    Is there a function module that could be useful to update the classification data of a material?
    Thanks
    Carlo

    Hi Ravikumar,
    I tried to use the function module, but it doesn't works well, is it necessary thet material must have the Calssification view already set on?
    Thanks
    Luigi/Carlo

  • FM/BAPI for creation of Material Document (similar to Transaction MB1C)

    Hi Gurus,
    Good day.
    Are you guys aware of FMs / BAPIs that can produce Material Documents (similar to the Function of Transaction MB1C)?
    Thank you very much!
    Best regards.
    Brando

    hi
    in addition to BAPI_GOODSMVT_CREATE ,you can try user exits as well like
    MBCF0005 Material document item for goods receipt/issue slip
    MBCF0002 Customer function exit: Segment text in material document item
    MB_CF001 Customer Function Exit in the Case of Updating a Mat. Doc
    hope this helps
    regards
    Aakash Banga

  • Error: "Not possible to determine shipping data for material" in STO

    Gurus,
    I have maintained the shipping point determination properly, still I get above error while creating ME21N.
    What could be the possible reason?
    Regards
    Trupti

    Hi,
    On top of the Shipping Determination configuration done, pls check the following: -
    1. Go to path IMG --> MM --> Purchasing --> Purchase Order --> Set up Stock Transport Order --> Define Shipping Data for Plant --> Assign a Customer no.-Plant for the respective Plant. This number is created in Sales Customer Master.
    2. Go to path IMG --> MM --> Purchasing --> Purchase Order --> Set up Stock Transport Order --> Assign Delivery Type and Checking Rule --> Make sure your PO Type is assigned to relevant Delivery Type.
    This should fix the problem.
    Thanks.
    Rgds.

Maybe you are looking for