VL10B via WM picking not possible
Dear all,
I am working on STO scenorio , via Vl10B i created delivery for STO purchase order, but when i am navigate through delivery document it went to VL03N and i am editing the delivery and i am able to pick if stoarge location not WM managed..
If storage is WM managed i am not able to create Transfer order via subsequent function, it is in display mode. i can proceed with LT03 & VL02N i can able to create transfer order.
so my requirement is i want to picking through navigation from VL10B. (it is possible for non WM managed stoarge location). how to active create transfer order in menu bar?
Thanks
Muthuraman>D
Hi,
It is because you have not maintained material in warehouse.this is the maine reason.if you maintaine the stock in warehouse then you can do it from VL10B.
so check it once.the material should create with warehouse views also.
if you want to see the exact error just you select the line item and click on icon "log for delivery creation" then one line item will be generated,select this and click on the button Notes,then you can see the error.
Thank you,
Similar Messages
-
BI IP Executing planning sequence via process chain not possible
Hi,
we use BI IP and have defined a process chain (RSPC) with value type process planning sequence. When we execute it, we get error message
"Inconsistent input parameter (parameter: <unknown>, value <unknown>)"
When we execute this planning sequence via the modeller or via SE38 RSPLS_PLSEQ_EXECUTE everything works fine. I thougt the cause could be the user of the job itself (job is executed with different user, and variant of planning sequence is user-dependent!), but I changed the user in the job itself as well without results.
any thoughts?
regards
D
nullHi,
I executed with my user and have a SAP_ALL authorization. Perhaps it could be because we use authorisation with the old method (4.0) (-> I'm not sure on this). I also think it has to do with authorization. I'll check this out with our authorization consultant.
D -
Video/Screen Sharing via 3G connection not possible - port restrictions?
I'm running Jabber-based iChat AV 5.0.3 sessions from my MBP connected to the Internet via a wireless USB modem 3G/UMTS (German Telekom D1 network). My buddies are connected to the Internet via regular broadband connections (DSL). I have set up a hosted Jabber server via Dreamhost (without SSL, port 5222 used).
Status Quo:
- Contact status of remote Jabber users shows up properly. All buttons (text chat, screen sharing, video) are available (not greyed out) on both sides.
- Text chat works fine.
- Video chat and screen sharing can be invoked from both sides (confirmation window shows up), but after confirmation the initiation process doesn't finish successfully. The video/screen sharing session doesn't run. *iChat AV shows a message indicating that it doesn't receive an answer from the remote user device.* If the iChat session is initiated from a buddy's computer, the buddy gets the same message respectively.
- For testing purposes, I changed the internet connection on my MBP from the mobile 3G USB modem to a regular *DSL broadband connection (same ISP, German Telekom). In this scenario, video/audio calls and screen sharing work flawlessly!* Therefore, I assume that the problems in 3G connection mode is caused by the ISP (German Telekom) blocking/restricting ports required by iChat AV for initiating the video call and streaming the data on their 3G network.
Is there any way to bypass ISP restrictions, by either changing specific iChat AV port settings on both ends (client devices) or by port forwarding? If yes, which settings should I change? Unfortunately, it's couldn't find any document indicating which ports are opened/allowed by German Telekom's 2G/3G (GSM/UMTS) network.
Below is an excerpt of the error message produced by iChat AV:
iChat Connection Log:
2010-11-09 21:18:19 +0100: AVChat started with ID 494414145.
2010-11-09 21:18:19 +0100: [email protected]: State change from AVChatNoState to AVChatStateWaiting.
2010-11-09 21:18:19 +0100: 0x1a8bf8b0: State change from AVChatNoState to AVChatStateInvited.
2010-11-09 21:18:28 +0100: 0x1a8bf8b0: State change from AVChatStateInvited to AVChatStateConnecting.
2010-11-09 21:18:28 +0100: [email protected]: State change from AVChatStateWaiting to AVChatStateConnecting.
2010-11-09 21:18:48 +0100: 0x1a8bf8b0: State change from AVChatStateConnecting to AVChatStateEnded.
2010-11-09 21:18:48 +0100: 0x1a8bf8b0: Error -8 (Did not receive a response from 0x1a8bf8b0.)
2010-11-09 21:18:48 +0100: [email protected]: State change from AVChatStateConnecting to AVChatStateEnded.
2010-11-09 21:18:48 +0100: [email protected]: Error -8 (Did not receive a response from 0x1a8bf8b0.)
Video Conference Error Report:
0.000000 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/DotMacConfiguration.m:1039 type=4 (FFFFFFFF/2)
[HTTP GET failed (0)]
0.000627 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/DotMacConfiguration.m:758 type=4 (FFFFFFFF/0)
[HTTP GET failed (0)]
0.346813 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/DotMacConfiguration.m:758 type=4 (FFFFFFFF/0)
[HTTP GET failed (0)]
1331.086051 @/SourceCache/VideoConference/VideoConference-415.22/SIP/SIP.c:2917 type=4 (900A0015/0)
[SIPConnectIPPort failed]
1333.086142 @/SourceCache/VideoConference/VideoConference-415.22/SIP/SIP.c:2917 type=4 (900A0015/0)
[SIPConnectIPPort failed]
1335.086270 @/SourceCache/VideoConference/VideoConference-415.22/SIP/SIP.c:2917 type=4 (900A0015/0)
[SIPConnectIPPort failed]
1337.086603 @/SourceCache/VideoConference/VideoConference-415.22/SIP/SIP.c:2917 type=4 (900A0015/0)
[SIPConnectIPPort failed]
1339.087985 @/SourceCache/VideoConference/VideoConference-415.22/SIP/SIP.c:2917 type=4 (900A0015/0)
[SIPConnectIPPort failed]
1341.088212 @/SourceCache/VideoConference/VideoConference-415.22/SIP/SIP.c:2917 type=4 (900A0015/0)
[SIPConnectIPPort failed]
1343.088361 @/SourceCache/VideoConference/VideoConference-415.22/SIP/SIP.c:2917 type=4 (900A0015/0)
[SIPConnectIPPort failed]
Video Conference Support Report:
929.446913 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/VCInitiateConference.m:2059 type=2 (00000000/0)
[Connection Data for call id: 1 returns 1
934.996640 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/VCInitiateConference.m:2074 type=2 (00000000/0)
[Prepare Connection With Remote Data - remote VCConnectionData: 1, local VCConnectionData: 1
935.002114 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/VCInitiateConference.m:2266 type=2 (00000000/0)
[Initiate Conference To User: u0 with Remote VCConnectionData: 1 with Local Connection Data: 1 conferenceSettings: 1]
935.467624 @/SourceCache/VideoConference/VideoConference-415.22/SIP/Transport.c:2138 type=1 (00000000/0)
[INVITE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP lip:16402;branch=z9hG4bK0fdd30e326aa779b
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>
From: "0" <sip:user@lip:16402>;tag=544473054
Call-ID: 9c7ecf46-ec3d-11df-8530-f81eeb5f4012@lip
CSeq: 1 INVITE
Contact: <sip:user@lip:16402>;isfocus
User-Agent: Viceroy 1.4
Content-Type: application/sdp
Content-Length: 708
Video Conference User Report:
928.427249 @:0 type=5 (00000000/16402)
[Local SIP port]
934.996832 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/VCInitiateConference.m:2171 type=5 (00000000/0)
*[Remote Router]*
*[PORT RESTRICTED]*
934.996842 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/VCInitiateConference.m:2173 type=5 (00000000/0)
[Remote CommNAT Result: 0x000000d0
936.003962 @:0 type=5 (00000000/60)
[Detected bandwidth (kbits/s): 2627 up, 2627 down. (00000000)
936.033015 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/VideoConferenceMultiController.m:2423 type=5 (00000000/0)
[Start Conference With UserID: u0]
978.787787 @:0 type=5 (00000000/16402)
[Local SIP port]
1014.011790 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/VCInitiateConference.m:2171 type=5 (00000000/0)
[Remote Router]
[PORT RESTRICTED]
1014.011800 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/VCInitiateConference.m:2173 type=5 (00000000/0)
[Remote CommNAT Result: 0x000000d0
1015.024555 @:0 type=5 (00000000/60)
[Detected bandwidth (kbits/s): 2627 up, 2627 down. (00000000)
1015.031800 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/VideoConferenceMultiController.m:2423 type=5 (00000000/0)
[Start Conference With UserID: u0]
1323.083386 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/VCInitiateConference.m:2171 type=5 (00000000/0)
[Remote Router]
[PORT RESTRICTED]
1323.083396 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/VCInitiateConference.m:2173 type=5 (00000000/0)
[Remote CommNAT Result: 0x000000d0
(…)Hi,
Does this 3G device have any set up functions that are on your Mac ?
If it does not it is likely that it is wide open to all Port (65535 of them).
I presume that in System Preferences > Network you see a Public IP when using this device ?
Again this would tend to pint to all the ports being open.
Is there anything on the ISP's web site that suggests this device is unsuitable to be used with VoIP or SIP connections ?
VoIP (Voice over the Internet) uses the SIP connection process the way iChat does.
Most likely the issues is the way packets are sent.
When you do a download, for instance, do you find the speed increases in the first few minutes ?
When some data packets are sent over the Internet the next one is not sent until confirmation that the first has arrived.
This Latency effects Point to Point WiFi (antenna to Dish on House) and satellite connections mostly particularly when it is a two way thing.
It can effect Mobile/Cell phone type connections.
What sort of Speeds are you getting on the 3G device ?
http://www.speedtest.net/
Do these seem to get faster as the time proceeds ? (this can be difficult to spot).
The Log mentions one end being at just over 2Gbps although it does not make it clear which end.
As the Remote end is the end that reports "Router: Port Restricted" and it works over standard DSL we have to presume they have the ports open.
You could try restricting iChat 's Bandwidth in iChat menu > Preferences > Video Section to 500kbps (try it at both ends)
If that does not work try 200kbps
This may stop iChat from trying to send data too Fast for the Network Connections.
Realistically there are a few too many variables here.
It could be Speed of data throughout at the Initiation point. (Slow Start up of data transfer)
It could be an Internal setting preventing SIP.
It could be that the 3G network sends and receives data by different routes.
(I have seen this once when a ISP was repairing some Cabling. To maintain end user speeds they managed their own network to split Incoming and outgoing data to the end point.)
iChat does not like this as it checks the IPs and the Hops (number of intermediate stages/servers) and if the data is different it will not connect (Man in the Middle attack protection).
I can't remember the last time I knew of someone being successful with either an 3G USB dongle or a 3G phone as Modem (internet Sharing).
Despite my ideas I think you will be unlucky and this will not work.
10:31 PM Saturday; November 13, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat" -
Not possible to setup icloud email filter rules from ipad
Users on ipads with icloud for email appear to have no way to set or edit their email filter rules, as this functionality is not provided via any mail app menu, and attempts login and edit these via webmail is not possible since Apple has set icloud.com to intercept and disallow ipad web browser logins. Is there a workaround or do we just direct people over to gmail?
No, there is no workaround available. Unfortunately, you would have to use a PC or Mac in order to sign in to the web portal www.cloud.com.
-
Calendar invites are not possible
I am frustrated. Working with 10.8.5.Invites via ical are not possible. Is there anywhere a good and helpful manual which shows the different steps.
Once I enter the first letters of an mail address, than choosing the one from the pull down list it is always marked with a "?" question mark. Then I push the button "sent" or "refreh" button, but the person which should receive the invitation does not receives it, nor can I check whether the mail actually was sent.
Would be really interested in how to solve this problem
Kind regards
GerhardSorry for the late reply, it is still an irritating issue. Apple says it's Google's poblem. Google thinks it's Apple's issue. Extremly irritating.
I tried setting up the Calendar using the Exchange presets but that did not solve the invitation problem. -
Web-UI error message "Access via 'NULL' object reference not possible"
I need some help, I'm not a Basis person but I need to get this connection problem resolve.
This problem is in our DEV ICWeb system. After logging in to Web-UI, I got a error message "Access via 'NULL' object reference not possible". We have 3 clients (100, 220, & 310) in DEV and all 3 clients are giving me the same error message.
From the help.sap.com, I found this topic http://help.sap.com/saphelp_nwes70/helpdata/en/84/43f0d786304e19a652a8f80909a8ec/content.htm
but in the document it asked to go to SM59 to check the ESH_APPL_WS_TEMPLATEENGINE destination. But we don't have that destination setup in all our systems.
Here is the complete error message:
Error when processing your request
What has happened?
The URL http://crm-dev.staff.copa:8000/sap/bc/bsp/sap/crm_ui_frame/BSPWDApplication.do was not called due to an error.
Note
■The following error text was processed in the system CD1 : Access via 'NULL' object reference not possible.
■The error occurred on the application server CRM-DEV_CD1_00 and in the work process 0 .
■The termination type was: RABAX_STATE
■The ABAP call stack was:
Method: GET_DATA_LOSS_HANDLER of program CL_CRM_UI_CORE_APPL_CONTROLLERCP
Method: GET_DATA_LOSS_HANDLER of program CL_CRM_UI_CORE_APPL_CONTROLLERCP
Method: EH_TRIGGER_NAVIGATION of program CL_CRM_UI_CORE_APPL_CONTROLLERCP
Method: SET_WORKAREA_CONTENT of program CL_CRM_UI_CORE_APPL_CONTROLLERCP
Method: PROCESS_NAV_QUEUE of program CL_BSP_WD_VIEW_MANAGER========CP
Method: DO_INIT of program CL_CRM_UI_FRAME_APP_CONTROLLERCP
Method: DO_INIT of program CL_BSP_CTRL_ADAPTER===========CP
Method: GET_PAGE_CONTEXT_CURRENT of program CL_BSP_CONTEXT================CP
Method: ON_REQUEST_ENTER of program CL_BSP_RUNTIME================CP
Method: ON_REQUEST of program CL_BSP_RUNTIME================CP
What can I do?
■If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system CD1 in transaction ST22.
■If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server CRM-DEV_CD1_00 in transaction SM21.Hi Michael,
Refer to the link below and check the procedure.
http://help.sap.com/saphelp_nwes70/helpdata/en/84/43f0d786304e19a652a8f80909a8ec/content.htm
Regards,
Arjun -
When I connect my Mac Mini 2011 with Lion to a TV via HDMI and an earphone cable is plugged in, it´s not possible to choose sound out via hdmi, as opposed to connection via the minidisplay port. Anybody knows how to fix this?
Was just on the phone with Apple about this.
The solution was as follows for me anyway...
Go to your Finder
Choose the Go Menu
Choose Computer
Choose your Macintosh Hard Drive
Choose your "Library" Folder
Choose the "Preferences" Folder
There should be a folder called "Audio"
Move that whole folder to the trash
Empty the Trash
Restart from the Apple Menu
When you are back up and running;
Choose System Preferences from the Apple Menu
Choose Sound
In the output tab you should now be able to make the HDMI "Sticky"
Enjoy your sound over HDMI and no more dirty knees or broken backs unplugging the desktop speakers!
Mac Mini 2011 2.5Ghz 8 GB of RAM - Planar 17" VGA via display port adapter and Samsung 26" LCD TV via HDMI -
Hi all ,
Im getting the below error , actually recently i created my own custom table zstudent, later i wrote select query to fetch data from the same and dump at internal table and then bind this to the table node.
But im getting below error, even i removed the select query still same error is occuring.
Error when processing your request
What has happened?
The URL http://********00.*****b.com:8000/sap/bc/webdynpro/sap/zdemo_student/ was not called due to an error.
Note
The following error text was processed in the system IDS : Access via 'NULL' object reference not possible.
The error occurred on the application server axsids00_IDS_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: WDDOINIT of program /1BCWDY/YUSM2Q74A826Y0JY1I4V==CP
Method: IF_WDR_COMPONENT_DELEGATE~WD_DO_INIT of program /1BCWDY/YUSM2Q74A826Y0JY1I4V==CP
Method: DO_INIT of program CL_WDR_DELEGATING_COMPONENT===CP
Method: INIT_CONTROLLER of program CL_WDR_CONTROLLER=============CP
Method: INIT_CONTROLLER of program CL_WDR_COMPONENT==============CP
Method: INIT of program CL_WDR_CONTROLLER=============CP
Method: INIT of program CL_WDR_CLIENT_COMPONENT=======CP
Method: INIT of program CL_WDR_CLIENT_APPLICATION=====CP
Method: IF_WDR_RUNTIME~CREATE of program CL_WDR_MAIN_TASK==============CP
Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CPThanks Rama,
Acutally i accidentally commented the lo_nd_student = wd_context ....etc
this line was commented .
i have one small requirement to fetch data from local customised table and fill the same to internal table and bind that to table node.
my table node is student having attributes as name , city and number , all are of type strings.
now i created one custom table zstudent having ID - char of length 10,
name of type string
city of type string
num of type string
i have inserted records
but when i use select query to fill data from this zstudent to my internal table of type lt_student type wd_this->elements_student ,
im getting same above error. -
Hi Guru's,
i am new for WebDynpro programming.I am trying to use select-options tutorial.
System showing select options and table binding on screen when i test the application.
I have using search button to get the value which user will i/p.for that onaction method created, i have writen the code to get the values which user will input.
Method given below is of componentcontroler
method wddoinit .
data: lt_range_table type ref to data,
rt_range_table type ref to data,
read_only type abap_bool,
lt_range_table1 type ref to data.
data: lr_componentcontroller type ref to ig_componentcontroller,
l_ref_cmp_usage type ref to if_wd_component_usage.
create the used component
l_ref_cmp_usage = wd_this->wd_cpuse_select_options( ).
if l_ref_cmp_usage->has_active_component( ) is initial.
l_ref_cmp_usage->create_component( ).
endif.
wd_this->m_wd_select_options = wd_this->wd_cpifc_select_options( ).
wd_this->m_handler = wd_this->m_wd_select_options->init_selection_screen( ).
wd_this->m_handler->set_global_options(
i_display_btn_cancel = abap_false
i_display_btn_check = abap_false
i_display_btn_reset = abap_false
i_display_btn_execute = abap_false ).
lt_range_table = wd_this->m_handler->create_range_table( i_typename = 'S_CARR_ID' ).
wd_this->m_handler->add_selection_field( i_id = 'CARRID'
it_result = lt_range_table i_read_only = read_only ).
call method wd_this->m_handler->add_horizontal_divider
exporting
i_id = 'LINE'.
endmethod.
Method given below is of VIEW.
method ONACTIONSEARCH .
DATA: NODE_FLIGHTS TYPE REF TO IF_WD_CONTEXT_NODE.
DATA: RT_CARRID TYPE REF TO DATA.
DATA: ISFLIGHT TYPE TABLE OF SFLIGHT.
DATA: WSFLIGHT TYPE SFLIGHT.
FIELD-SYMBOLS: <FS_CARRID> TYPE TABLE.
Retrieve the data from the select option
RT_CARRID = WD_THIS->M_HANDLER->GET_RANGE_TABLE_OF_SEL_FIELD( I_ID = 'S_CARR_ID' ).
Assign it to a field symbol
ASSIGN RT_CARRID->* TO <FS_CARRID>.
CLEAR ISFLIGHT. REFRESH ISFLIGHT.
SELECT * INTO CORRESPONDING FIELDS OF TABLE ISFLIGHT FROM SFLIGHT
WHERE CARRID IN <FS_CARRID>.
NODE_FLIGHTS = WD_CONTEXT->GET_CHILD_NODE( NAME = `FLIGHTS` ).
NODE_FLIGHTS->BIND_ELEMENTS( ISFLIGHT ).
endmethod.
while executing appln. error is trigger on line given below
RT_CARRID = WD_THIS->M_HANDLER->GET_RANGE_TABLE_OF_SEL_FIELD( I_ID = 'S_CARR_ID' ).
Err: The following error text was processed in the system BCD : Access via 'NULL' object reference not possible.
please help me out on this issue.
Thanks and Regards
Vinayak Sapkalhi ,
The attribute M_HANDLER is an attirbute of component controller (as told by your post) and so you cannot access it as you have done it.
You will have to access it as .
WD_COMP_CONTROLLER->M_HANDLER->GET_RANGE_TABLE_OF_SEL_FIELD(I_ID = 'S_CARR_ID' ).
Try doing it.
Or else , if you have created a similar attribute in your view itself , then it is "INITIAL" and hence you are getting the dump.
You will have to assign the view attribute "M_HANDLER" with the value of your component controller attribute "M_HANDLER" ,because all the initializations are done in WDDOINIT of comp controller and on component controller atribute "M_HANDLER".
Thanks,
aditya. -
Runtime error in WebDynpro - Access via 'NULL' object reference not possibl
Hi,
Structure of the CONTEXT in the VIEW::
WDSCREEN1
--> IMPORTING
--> S_KUNNR <- its a select option
--> EXPORTING
--> T_REPORT <- Which is table to hold the output data (with 4 fields)
In the context area i have root node (WDSCREEN1) and Sub nodes are IMPORTING and EXPORTING and child nodes as shown above. When i am referring them everything is fine except T_REPORT.
* Declaration
DATA: node TYPE REF TO if_wd_context_node,
node_exporting TYPE REF TO if_wd_context_node,
node_importing TYPE REF TO if_wd_context_node,
node_report TYPE REF TO if_wd_context_node,
node = wd_context->get_child_node( wd_this->wdctx_wdscreeb1 ).
node_exporting = node->get_child_node( wd_this->wdctx_exporting ).
node_importing = node->get_child_node( wd_this->wdctx_importing ).
* Bind the data to the context
node_report = node_exporting->get_child_node( name = 'T_REPORT` ).
node_report->bind_elements( lt_report ).
Its giving run time error 'Access via 'NULL' object reference not possible. ' when it comes to ' node_report->bind_elements( lt_report ).' I checked the content while debugging and found that it was initial. Not sure why Node_report is initial. all others have data.
node ->
node_exporting ->
node_importing ->
node_report ->http://wiki.sdn.sap.com/wiki/display/EP/PointersforTroubleshootingPortalRuntime+Errors
Hope this helps.
-Veer -
IC WEBCLIENT: Access via 'NULL' object reference not possible
Hi,
Iam working in ABAP, and learning CRM ABAP on CRM5.0 IDES Demo system I was trying to create a new WebIC by copying one view from CRM_IC to ZCRM_IC bsp application. Following are the steps I following according to Cook book documentation.
1. I copied BuPaDisplayCustomer view and controller from CRM_IC to ZCRM_IC from
BSP_WD_WORKBENCH by selecting CRM_IC and runtime profile = 'DEFAULT'.
2. Created a runtime profile from SPRO->CRM->IC Webclient->Customer specific modifications->Define
runtime profile.
3. Copied the 'DEFAULT' runtime profile to my new profile 'Z_COOKBOOK'. Assign 'ZCRM_IC' by
clicking on 'Controller and substitues'.
BSP Replaced Controller BSP ReplacmentController
CRM_IC BuPaMoreContactView Z_CRM_IC BuPaMoreContactView
4. Define IC Webclient profile:
SPRO->CRM->IC Webclient->Define IC Webclient profile->Copy the DEFAULT profile and assign it to
'Z_COOKBOOK',
5. Assigned the Webclient profile to the user from t-code 'PPOMW'. Selected 'USER' from the
existing 'Position' and Goto->Detail object->Enhanced obj descrption.Selected IC webclient from the
list and created Infotype assigned Webclient profile 'Z_COOKBOOK'.
6. Execute the ZCRM_IC from SE80 by rightclick and Test. Here is my problem,Iam receiving the
following error in the webpage.
The following error text was processed in the system CR7 :
Access via 'NULL' object reference not possible.
The error occurred on the application server CR7_01 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: SET_MODELS of program CL_CRM_IC_BUPADISPCUSTOME=====CP
Method: SET_MODELS of program CL_CRM_IC_BUPADISPCUSTOME=====CP
Method: SET_MODELS of program CL_CRM_IC_BUPADISPCUSTOME_IMPLCP
Method: DO_REQUEST of program CL_BSP_WD_VIEW_CONTROLLER=====CP
Method: DO_REQUEST of program CL_BSP_CTRL_ADAPTER===========CP
Method: ON_REQUEST of program CL_BSP_RUNTIME================CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_HTTP_EXT_BSP===============CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
I check the CRM services and all are active, using IE8 web browser. I just copied the view and controller
from CRM_IC into Custom BSP application i.e., ZCRM_IC.
Above error is occuring even If i run the standard CRM_IC BSP application and select one simple view.
from SE80.
Not sure whether any additional configuration or any special roles to be assigned to the Webclient profile.
Thanks,
Venn.hello swapna,
we are facing the same error while accessing the leave request link, all jco are testing fine, i checked backend connection and its fine, please tel me how did u resolved that issue,
Thanks in advance.....
ajay -
Is this possible via SQL or not ?
Hi There
I have a scenario. Am not sure if this is possible via SQL or not.
For Example Consider two tables
T1
product_id location_id stock
A 1 100
T2
product_id location_id aging_phase received_qty
A 1 1 20
A 1 2 30
A 1 3 70
Now in T1 there is actual stock that is 100, while aging wise if i see stock that is 20+30+70=120
What i want is, generate a SQL that should yield quantity equals stock in T1 but with AGING PHASE wise break up
Result should be like this :
product_id location_id aging_phase qty
A 1 1 20
A 1 2 30
A 1 3 50
It would be a great help if somehow it becomes possible. Anyone have some solution ?
Regards
CapriCapri wrote:
May i have your email id please so that i can describe my problem in detail ?As Billy mentioned I would prefer not to do this. However, you can explain your problem here in detail. Please provide the following information:
1. Oracle version (SELECT * FROM V$VERSION)
2. Sample data in the form of CREATE / INSERT statements
3. Expected output.
4. The business logic to achieve the expected output.
5. Please use \ tags to surround #2 and #3. -
WebDynpro Abap MSS: Access via "NULL" object reference not possible
hi,
My customer send me the following link to Appraisal Documents (Manager) MSS
http://server.sap.portal:1810/sap/bc/webdynpro/sap/HAP_START_PAGE_POWL_UI_MSS/
http://a.imageshack.us/img685/5959/mss3.jpg (logon in Costumer SAP System)
http://a.imageshack.us/img225/4008/mss4.jpg (Appraisal Documents (Manager) MSS run succesful)
Link that also run by the SICF in my customer is correct.
But when I run in my SAP System see the following error
http://a.imageshack.us/img715/5355/mss1j.jpg (SCIF in my SAP System)
http://a.imageshack.us/img44/5346/mss2.jpg (SCIF - test service)
http://a.imageshack.us/img840/1677/mss2b.jpg (Error, without window logon)
<b> Access via "NULL" object reference not possible</b>
Other question is: In what part of MSS is this option? because the ESS is in Career and Jobs / Appraisals Documents
http://a.imageshack.us/img683/9900/careerjob3.jpg (Employee Self Service / Career and Jobs / Appraisals Documents)
thanks for your posts and answer
IvanHello
The most important information is (again) missing: which object reference is initial ("NULL")?
The ABAP dump will tell you.
Below I show an example how this can happen (and be avoided):
LOOP AT lt_accountings INTO ls_accounting.
lo_po_account ?= ls_accounting-accounting.
ENDLOOP.
" QUESTION: Are you sure that lo_po_account hold an instance ???
" If LO_PO_ACCOUNT is empty the following statement will give you the dump.
ls_mepoaccounting = lo_po_account->get_data( ).
" And that is how to avoid this (at least the dump. Whether your logic is still ok is another matter...)
CHECK ( lo_po_account IS BOUND ).
ls_mepoaccounting = lo_po_account->get_data( ).
Regards
Uwe -
It's not possible upgrade master data via DTW in SBO 2007.
Hi to everybody,
I was trying to upgrade de BP master data via DTW, but its not possible. I cheched the chechbox "Update" but I got an error saying "This entry already exists in the following tables (ODBC - 2035)".
The change I try to do is in the address contact.
Thanks.
Daniel
Edited by: Philip Eller on Jun 20, 2008 10:32 AMHi Daniel Rivas,
Regarding this issue, please kindly check the following
-> Whether there are duplicated records in the import file. If there are two rows for the same name, please remove one of them and this file can then be imported successfully.
-> LineNum should be filled correctly. It should be sequential number which begins from the quantity of existing contact persons. For example if there are 10 contact persons for a specific BP, and you want to add another 10 new contact persons, the LineNumber should start from 10 to 19.
-> In DTW Wizard step 3, select the checkbox 'Add all Items into Schema if can't find corresponding item when updating' under Target Data tab. You can refer to Note 789315 for information on the functionality of this checkbox.
Hope this helps.
Regards, Summer
SAP Business One Forums Team -
Getting error on Portal : Access via 'NULL' object reference not possible
hi friends,
While executing a bapi,I am getting this error : Access via 'NULL' object reference not possible., error key: RFC_ERROR_SYSTEM_FAILURE
I am calling a bapi with only one required parameter from Portal as per the design of the bapi and the bapi itself is calling some other functions internally.
I a using ECC 5.00 i,e. EA-HR 5.00. On SDN it is suggested to Apply OSS Note 1018036. But it is applicable to EA-HR 6.00 and subsequent releases,I guess.
Need your suggestions and also need to know if the above Note can be applied to EA-HR 5.00.
P.S: Points would be assigned, thanks is advance.
Regards,
Sudeep DasHi,
ESS Personal information scenarios
Reason and Prerequisites
In case record is not modified successfully it should discard the
trial.Due to program error this was not happening correctly
Solution
Code changes were done in ESS adapter to handle this scenario
Hope this helps
Regards
Krishna
Maybe you are looking for
-
Keeps coming up as a error while trying to upload
I have been uploading files in the past to Acrobat.com but it appears the larger the files the more difficult it is on some occasions, 2 in particular last night. I think some, maybe 2 or 3 may have been too large for the page, out of lets say 149 do
-
Gettin the field valus on double clicking and calling the transaction
Hi how to use call transaction after clicking on a particular line on the output list with the field values of that line ? I am using MIR4 transaction .Once the output list is displayed when i double click on any line i have to pass the belnr and th
-
How to use of API for Cancel Sales Orders
Hi.... I want to use API for Cancel Sales Orders. Plz give me advice how we can cancel orders. I know that there is procedure provide in ORACLE APPs (i.e. OE_ORDER_PUB.process_order). But in this procedure i know the how to create and update sales or
-
DoGet and response not working
Dear if you happend to know sevlet very well: I have a servlet that respond to doGet messages, somehow the response stream write data to the response stream, the client doesn't receive it at all, I checked the doGet request and response from log file
-
Hi, I have an RMI Server inwich the update method calls COBOL application and returns with an int value based on the return value of the COBOL. The actual problem here is, if I make this as synchronized method there is no issue. But when I make the u