VL31N: multiple item Inbound is not allow

Dear experts,
I have customer's requirement: In VL31N, there is only 1 PO is refer. It means inbound delivery is single item, multiple item Inbound is not allow, could you know how to do or any user exit support to do that.
Thanks

Look at VTLA > (EL<>/DL/DZL )--> and item cat ELN --> Data transfer -> Item data routines.
Can't remember which routine you can use, try it out. If not, ask abaper write a new routine and assign to it.

Similar Messages

  • Error in RFx : Item type 'Service' not allowed for this Item

    hi , experts,
      We use SRM7.0 in Standalone scenario .
      i get an error when i transfer SC to RFx :     Line 0001: Item type 'Service' not allowed for this Item .
    if someone kindly tell me how to correct this Error.
      another question is ,in the Standalone scenario , can we create Service Master with multiple level(hierarchy) use Tcode 'COMMPR01 ' ?
       reagrds
               claud

    Hi Claud,
    SRM does not support hierarchy in service for operational documents like PO, contract, confirmation and invoice in SRM 7. It does support hierarchy in service only for RFx doucments. You need to activate the hierarchy template for SRM for that.
    Thanks and regards,
    Ranjan

  • Item category 01001 not allowed in accounting transaction 0000/0001- Error

    Hello,
    When we posting to multiple cost center using the infotype 27. System is posting to a GL called Bussiness Area Clearing  account (not defined in HR) and we are facing the following error "Item category 01001 not allowed in accounting transaction 0000/0001"
    Kindly help to resolve.
    Regards,
    Ahmed

    Hi Mangalraj,
    Have check the BOM & Routing for Parent production order costing check box is for both. Coming to rework order doesn't have any material, though it has pulled the some material cost from parent production order. The same can see at production order costs>analysis, but where as costs>itemization not able to see and mesage issued like: object was not costed.
    as early mentioned, confirmation level same error.
    Hope this may give some idea on this case, thanks for your time on this.
    Looking forward some light.
    Thanks...Vyas

  • Item category 02100 not allowed in accounting transactio 0300/0001  FB60

    Hi,
    ERROR MESSAGE : Item category 02100 not allowed in accounting transactio 0300/0001 
    The above error message is coming when trying to post in FB60 tcode ( Enter vendor invoice ).
    please provide necessary information to rectify this problem.
    regards,
    Hari

    Hi Balaji,
    i checked in classify g/l accounts for document splitting ,
    my g/l account is coming under item category 02100-Customer: Special G/L Transaction in spro.
    Also i checked classify document types for document splitting
    TYpe : KR
    Des : Vendor Invoice
    Transn: 0300
    variant ": 0001
    des : Vendor invoice
    name : standard.
    Actually g/l account for CANTEEN DEDUCTION.
    Regards,
    Hari priya

  • Item category is not allowed

    hello all,
    I am getting the below error "  Item category 02000 not allowed in accounting transaction 0300/0001Message no. GLT2001".
    while posting the FB60.  New GL is activated in the system.
    he is using   fb60
    31    xyz           2500
    40    121041     2500
    Then i am getting the above error.....
    The below details are from the Classify GL A/c for Document Splitting.  Step.....
    Acct from    Acct to       Category             Description
    100000          100409        04000             Cash Account
    112000          112040        01000                Balance Sheet Account
    121000          125310        02000             Customer
    125500          125500        01000             Balance Sheet Account
    130000          135510        06000             Material
    141020          159999        01000             Balance Sheet Account
    160000       170200        07000             Fixed Assets
    180000          192050        01000             Balance Sheet Account
    199999          199999        01000            Balance Sheet Account
    211000          211030        03000            Vendor
    211040          211050        01000            Balance Sheet Account
    Regards
    Kumar

    Hi
    From the example provided by you, it seems you had not clasified any expenses / Income account. In case of FB60, the 40 posting key can't be any reconciliation account. Can you confimr what is the description of the G/L you are posting using posting key 40.
    Based on that we can proceed further to correct the issue reported by you.
    Regards
    R.Karthigayan

  • Item catagory 06000 not allowed in accounting transaction 0200/0001

    Hi Guru's,
    My client wants to sell Raw Material & pass the entry in the system but now system gives an error message Item catagory 06000 not allowed in accounting transaction 0200/0001
    Document spliting is activated in our company.
    whether to use revenue instend of material catagory?
    Please help me.
    Thanks & Regds
    Santosh Rothe

    Hi,
    First please check what Item Category is assigned against the relevant GL account.
    Financial Accounting (New)-General Ledger Accounting (New)-Business Transactions-Document Splitting-Classify G/L Accounts for Document Splitting
    Then check what accounting transactions are allowed for the item category
    Financial Accounting (New)-General Ledger Accounting (New)-Business Transactions-Document Splitting-Extended Document Splitting-Define Document Splitting Rule.
    You will have an idea what to change here.
    Regards,
    Saravan Kanuparthy

  • Item category 02000 not allowed in accounting transaction 0300/0001

    Hi Experts
    I am trying to post transcation through FB60, I am getting the following error "Item category 02000 not allowed in accounting transaction 0300/0001"
    Can you please suggets
    Regards
    Sreenivasulu

    Hi Govind,
    You need to assign item category 03000 pertaining to vendor. Item category 02000 is pertaining to customer accounts. Go and change the item category for the GL accounts which are using for FB60 transaction. Transaction code: GSP_LZ2
    Regards
    Srikanth

  • Error Item Category 04000 not allowed in accounting transaction 0300/0001

    When we are posting a Incoming payment document with debit to -bank charges refund and bank account ,got the error Item Category 04000 not allowed in accounting transaction 0300/0001.
    Please advice.
    Edited by: mysap query on Feb 24, 2009 2:56 AM

    Hi
    This issue is related to document splitting.  Unfortunately I don't have access to an ECC6 system today so can't give you the specific solution, however you need to check the config settings in the following path:
    IMG > Financial Accounting (New) > General Ledger Accounting (New) > Business Transactions > Document Splitting > Classify Document Types for Document Splitting
    If you are unable to resolve this, you should ask for assistance from a FI consultant.
    Regards
    Kylie

  • "Item category 01001 not allowed in accounting trantransaction 0000/0001"

    Hi,
    I am facing an error of FI- HR integration in Payroll Posting Document "Item category 01001 not allowed in accounting transaction 0000/0001"  while doing indirect posting of HR-FI document.
    The Business Area Clearing Account we are using 10800690  - Item category 01001 and accounting transaction 0000/0001.
    Error Message No. GLT2001.
    Can anybody help me how this error can be removed.
    We are mainly want to split the profit center assigned in cost center into two profit center with 50:50 ratio.
    Regards
    Rahkes

    Hi
    Your error is due to your assignment of GL Accounts. When you post a billing document through VF01, the system assumes that a revenue a/c will be effected. Now, in your assignment of item category to GL Account, you have assigned the item category Materials (06000) to your Revenue GL Account. This is maintained in Config:
    IMG>Financial Accounting (New)> General Ledger Accounting (New)> Business Transactions>Document Splitting>Classify GL Accounts for Document Splitting
    However, for Accounting Document Type RV (Generally used for SD generated accounting document for Billing ), you would have assigned the Business Transaction for Invoice (200). However, in this as per standard design, there is no posting allowed for material account
    IMG>Financial Accounting (New)> General Ledger Accounting (New)> Business Transactions>Document Splitting>Extended Document Splitting>Define Document Splitting Rule
    Based on your splitting rule used, you can check the config here.
    To resolve the error you have two options:
    1. Change the assignment of Item Category to GL Account in the path to revenue
    IMG>Financial Accounting (New)> General Ledger Accounting (New)> Business Transactions>Document Splitting>Classify GL Accounts for Document Splitting
    However, you must be careful, if any data has been posted, as changing this config leads to data inconsistency at account assignment level
    2. Define a new splitting rule with item category 06000 allowed for posting to material account allowed by copying the existing rule and assigning this to Document Type RV in the path
    IMG>Financial Accounting (New)> General Ledger Accounting (New)> Business Transactions>Document Splitting>Classify Document Types for Document Splitting
    Thanks & Regards
    Sanil Bhandari

  • With a wired keyboard and a 2014 iMac I cannot select multiple items which are not next to each other

    I have recently changed from Windows 7 desktop to a new iMac running Mavericks.  I have chosen a wired keyboard as I like  the usual Delete key function.
    I cannot find out how to select several items which are not next to each other (e.g. words in Pages).  The well known method in Windows, which is repeated in the the Apple Finder Help screen, does not work.  Would be grateful for advice

    Hi JBowfin,
    If I am understanding your question correctly, I believe that I have an article that will address this question for you:
    Mac OS X 10.0: Use Command Key to Select Multiple Items in List and Column Views
    http://support.apple.com/kb/TA20396
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • Item category 06000 not allowed in accounting transaction 1000/0001

    Hi,
    We try post following entry and getting this error.
    Debit    Exp. --- 50
    Credit   Exp -
    40
    Credit   Out bank----
    10.
    Please help out with solution.I cannot deactivate document splitting.

    HI,
    The problem is G/L account xxxx. In IMG customizing [Classify G/L
    accounts for document splitting], this account is classified as
    material which has item category 06000 assigned. However, as you
    mentioned, the document type does not allow this item category, so
    the error is issued here.
    Please change the assignment of item category for G/L account xxxxx
    to either Revenue(30000) or Expense(20000) depending on your business
    requirement. This should solve the problem.
    reg
    Madhu

  • Allow user to take survey multiple times, but do not allow the same response

    I have a requirement to allow users to take a survey multiple times, however, the answers to the survey can not be the same.
    So when a user takes the survey the first time they can take a second and a third but not have the same response.
    Using SharePoint 2007
    Thanks in advance

    As you denied yourself the Administration rights you cannot get it back in this account of course. Look to the right on this page and check the threads in "More like this".

  • Why will Firefox allow me to have multiple tabs available, but not allow me to switch between tabs, and can only look at a new tab by closing the previous one?

    Whenever I open a new tab, it appears on the tab bar where it should, but if I click on it nothing happens, the tab won't open, and I can't switch between multiple tabs. The only way to get to a new tab is to close the one I am currently on, and even then it will only open the next tab in order of precedence, so I can not even choose which tab is the next to view. This problem is making it impossible to use firefox as a research tool which requires fast switching back and forth between multiple tabbed pages simultaneously.

    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
    If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
    *In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
    *In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
    If Firefox is not running, you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac: Hold the '''option''' key while starting Firefox.
    * On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.

  • AR postings with multiple business areas is not allowed

    Hi
    A user is trying to post a customer invoice with two line items/two profit centres and two business areas (BA) and is receiving the above error message.
    I feel that is is logical due to the question as to what BA the cusomer belongs to. However, I noted some threads on Document split. I am not aware of document split functionality.
    Your comments on whether this is possible or how to check whether this funcionality is already configured is appreciated.
    Thanks
    NW

    Hi,
    Please check the following in IMG
    FA-GL Accounting new-Business Transactions-Document Splitting-Define Document Splitting characters for general ledger accounting.
    Here check whether the BA is checked for both the Zero Balance and Mandatory field.
    Regards
    Balaji

  • Item category 07000 not allowed in accounting transaction 1000/0001

    Hi,
    While doing F110 (Automatic Payments to vendor) i got this error,
    but for the same vendor if i used F-53 i am not getting this error.
    And only few invoices are getting this problem through F110.
    sateesh
    Edited by: Sateesh Kumar Veluguri on May 29, 2009 1:02 PM

    This error come while using particular document type
      accounting transaction 1000/0001 is standard by sap
    To rectify this error you have Define Business Transaction Variants  Z type
    SPRO >Financial Accounting (New)>General Ledger Accounting (New)>Business Transactions-> document Splitting>Extended Document Splitting>Define Business Transaction Variants>  click on Transact. 0000 click on Accounting transaction variant create Ztype variant say Z001
    Go Back click on  Classify Document Types for Document Splitting choose the document type change Transactn from 1000 to 0000 change Variant 0001 to Z001 save request
    you error get solve.

Maybe you are looking for