VLAN and STP compitability between Cisco 2950 and SRW2048

How Cisco 2950 and Linksys SRW2048 switches can be combined to work fine with more than one VLAN's and STP?? I want both switches to support three VLAN's and STP for loop free network.Can some body help me out to combine linksys and cisco switches to interconnect to form my Network???

I believe that the SRW2048 is a 48 port managed switch. The easiest way to set the VLAN and STP configuration of is to access the web utility of this switch via 192.168.1.254. You have to go to VLAN Management and he needs to create the VLANs. The default VLAN of the switch is VLAN 1. You need to create 2 more VLANs by choosing the VLAN IDs and the name you want for these VLANs.
After creating the VLANS, you need to determine the LAN of the switch you want to assign to each VLAN and the Trunk port or the port where you need to connect the SRW2048 to the Cisco 2950 switch. Go to the port setting and make this port as “truck”, and leave the other ports as “access”. Go to VLAN to ports and manually allocate the each LAN ports to the desired VLAN ID number. Take note that all ports that are members of VLAN1 should be “untagged” and the rest should be “tagged”. Save the settings you made.
The STP configuration for the SRW2048 can be found also in the web utility. Just go to the Spanning Tree tab and setup your desired STP configuration.
For the Cisco 2950, I am not quite sure on how to create these settings but I saw a useful link that might help you:
http://www.petri.co.il/csc_setup_a_vlan_on_a_cisco_switch.htm

Similar Messages

Routing issue between Cisco Nexus and Cisco 4510 R+E Chassis

We have configured Cisco Nexus 7K9 as core and Cisco 4510 R+E as access switches for Server connectivity.
We are experiencing problem in terms of ARP learning and Ping issues between Cisco Nexus and end hosts.

Hi,
So you have N7k acting as L3 with servers connected to 4510?.
Do you see the MAC associated with failing ARP in 4510?. Is it happening with all or few servers?. Just to verify if it is connectivity issue between N7k and 4510, you can configure an SVI on 4510 and assign address from same raneg (server/core range) and perform a ping.
This will help narrow down if issue is between server to 4510 or 4510 to N7k.
Thanks,
Nagendra

Cisco 2950 and Dell Powerconnect 5224

I am trying to Cascade a cisco 2950 and dell powerconnect 5224. I am connecting port 32 on the 2950 and port 24 (gigport) on the dell. Any idea on how I can get the cascading to work? This is what I have on the Dell and the cisco.
Dell Powerconnect 5224:
interface ethernet 1/24
switchport allowed vlan add 1 untagged
switchport native vlan 1
switchport mode trunk
switchport allowed vlan add 1,10 tagged
Cisco 2950:
interface FastEthernet0/32
switchport access vlan 10
switchport mode trunk
Dell documentationon casdcading between powerconnect and catalyst 4000 talks about setting up GVRP on both the dell and cisco switches. However, 2950 doesn't have GVRP.
http://www.dell.com/downloads/global/products/pwcnt/en/app_note_4.pdf
Any ideas, tips. Thanks.

Try this instead:
Dell:
interface ethernet 1/24
switchport allowed vlan add 1 untagged
switchport native vlan 1
switchport mode trunk
switchport allowed vlan add 10 tagged
Cisco 2950:
interface FastEthernet0/32
switchport mode trunk
switchport trunk allow vlan 1,10
switchport nonegotiate
You don't need "switchport access vlan 10" on the Cisco because it's not in access mode, it's in trunk mode. And on the Dell you don't want vlan 1 to be tagged and untagged.
Good luck.

The difference of the IEEE802.1x Auth between Cisco Routers and Catalyst switches

Hello
I am investigating the difference of the IEEE802.1x Auth between Routers and Switches.
Basically dot1x auth is availlable on Catalyst Switches. however if I want to check to
PortBased Multi-Auth , MAC address Auth and any certification Auth with this feature,
Is it possible to integrate into Cisco Router such as Cisco 891F ?
In my opinion Cisco891F is also available to use basic IEEE802.1x but if it compares with Catalyst switches such as Cat3560X
I think there might be any unsupported feature on Cisco 891F.
I appreciate any information. thank you very much in advance.
Best Regards,
Masanobu Hiyoshi

Many time in interviews asked comaprison between cisco routers and switches that i was answerless bcoz i dont have much knowledge about that.Can anyone provide me the compariosin sheet of the same.how are the cisco devices differ with each other how much Bandwidth each routres support and Etc...
Ummmm ... The most common question I get is "what is the difference between a router and a switch".
However, if you get a question like this, then my impression to this line of questioning are:
1. The candidate they are looking for has in-depth knowledge of routers and switches. And I mean IN-DEPTH!;
2. They are not looking for a candidate. They just want to stroke their ego. There is not alot of people who can give you the "names and numbers" of routers and switches at a snap of a finger. And if you do happen to know the answer, then and there, then expect a tougher follow-up question.

Mobility between Cisco WLC and Meraki(other vendor)

Is it possible that users can roam between Cisco WLC and other vendor wireless gear? Meraki keeps saying it is possible.
They keep saying it is a IEEE feature and everone should support but I do not understand how?

While theoretically possible with the adoption of capwap, it would require all the manufacturers to follow the specs exactly the same. Kind of like hearding cats, not impossible, but highly unlikely.. That's just my opinion
Sent from Cisco Technical Support iPad App

VPN between cisco WRVS4400N and EdgeMarc

Hi Experts
Please help me.
Is it possible to create VPN between cisco WRVS4400N and EdgeMarc appliance.
Regards,
Ejaz

Hi Ejaz
I don't expect any cisco folks that answer this community to be expert on EdgeMarc, but i may be wrong..
We employ a open standard IPSec implementation.
Here is the open source document that relates to the RV220W.
http://www.cisco.com/en/US/docs/routers/csbr/rv220w/open_source/OSD_RV220W_78-19892-02.pdf
The question could have been, have you asked EsgeMarc if they wiork with open standard based IPSec implemations on our routers.
I would prefer you look at the RV220W if possible, which is a relatively young product.
I am guessing since you can source a product from Disti, try one and see if it works.
The beauty of buying from a Cisco Disti Partner, is they they have a returns policy. Check out that policy, if you wish and keep the packaging and try out your application.
Answered a question with someone trying to form a IPSec link to a OEM firewall/ IPSec gateway ..it worked. so give your application a try
regards Dave.

Difference between Cisco DCNM and CISCO Fabric Manager

Hello Everyone,
I am new to Cisco SAN and just would like to know the differences between cisco DCNM and Cisco Fabric manager and which one is latest as of now.
regards
VINAY

Hi Viany,
Fabric Manager was renamed DCNM starting at 5.2.
Fabric Manager only monitors SAN Fabrics, while DCNM 5.2 and above can monitor both SAN Fabrics and Ethernet LANs.
Regards,
David

NX2-5K-60.8 %FWM-6-MAC_MOVE_NOTIFICATION: Host 0025.64ee.f160 in vlan 1 is flapping between port Po10 and port Po15

hi All ,
we received multiples port channel flapping alerts as below mention .the nx5K os :- System version: 5.2(1)N1(3)..
we connected two NX-5 CONNECTED THROUGH VPC FROM THAT WE CONNECTE 4849 SWITCH.Please suggest what should i do to resolve the issue.
Thanks
Sandeeps
NX2-5K-60.8 %FWM-6-MAC_MOVE_NOTIFICATION: Host 0025.64ee.f160 in vlan 1 is flapping between port Po10 and port Po15
NX2-5K-60.8 %FWM-6-MAC_MOVE_NOTIFICATION: Host 2c76.8ad0.e56d in vlan 1 is flapping between port Po11 and port Po10
-NX2-5K-60.8 %FWM-6-MAC_MOVE_NOTIFICATION: Host 2c76.8ad0.e56d in vlan 1 is flapping between port Po10 and port Po11
-NX2-5K-60.8 %FWM-6-MAC_MOVE_NOTIFICATION: Host 8c6a.e403.159d in vlan 1 is flapping between port Po10 and port Po29
NX2-5K-60.8 %FWM-6-MAC_MOVE_NOTIFICATION: Host 2c76.8ad0.e56c in vlan 1 is flapping between port Po11 and port Po10

You need to trace this mac address: - 00ab.cdef.0123 and check if this has dual nic card if yes then check if nic teaming is configured correctly ...then shut down one of the link and see if you are learning the same mac address on two different ports?
HTH

HT2731 my wife and I share an itune account. we both have our own iphone and ipad. how do i share my contacts and calander information between my iphone and ipad but not own her devices

my wife and I share an itune account. we both have our own iphone and ipad. how do i share my contacts and calander information between my iphone and ipad but not own her devices

Have her get her own Apple ID and then set up Family Sharing: Start or join a family group using Family Sharing - Apple Support

How can i keep the music pushed to all of families devices but the calendar and notes just between my phone and my mac using icloud?

Ok, so my whole family has the same apple ID so that we can all get the same music, and we want to be able to use icloud so that when one person buys a song it will push to all of our devices. But the problem is when I want my calendar on my mac to also be pushed to my phone it pushes to all of my familys devices. How can i keep the music pushed to everyones but the calendar and notes just between my phone and my mac using icloud?

Oops my bad...I see that during my troubleshooting I inadvertently left Ringtones unchecked in iTunes.

I'm a Dropbox user and I migrate between my iMac and a Toshiba notebook. Is there Apple software that will work on the notebook allowing me to open Pages, Numbers or Keynote documents that I've placed in Dropbox?

I'm a Dropbox user and I migrate between my iMac and a Toshiba notebook. Anyone know if there is Apple software that will work on the Toshiba that will allow me to open Pages, Numbers or Keynote documents when I access them in Dropbox?
Maybe I should just always export from Pages into Word (and likewise for the other types) before I upload to Dropbox? I hope not!!

If you don't want to export files and consider the Microsoft formats to be your basic working format, then you need to consider either using MsOffice for Mac or LibreOffice instead of the iWork suite.
You could always run a virtualised OSX on the Toshiba, but I don't think Apple will appreciate me telling you how to do that.
Peter

Is it possible to import and export dump between oracle 9 and oracle 11?

Is it possible to import and export dump between oracle 9 and oracle 11?
Source DB : Oracle 11g(unix0
Oracle client : Oracle 9(Windows)
Export import utility : Oracle 9's
Destination DB : oracle 9

I am getting the Following Error and export utility is not responding after this.
Export: Release 9.2.0.1.0 - Production on Thu Jul 15 14:37:01 2010
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Export done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
server uses AL32UTF8 character set (possible charset conversion)

Load-balancing and fail-over between web containers and EJB containers

When web components and EJB components are run in different OC4J instances, can we achieve load-balancing and fail-over between web containers and EJB containers?
null

It looks like there is clustering, but not loadbalancing available for rmi
from the rmi.xml configuration. The application will treat any ejbs on the
cluster as one-to-one look-ups. Orion will go out and get the first ejb
available on the cluster. See the docs on configuring rmi.xml (and also the
note below).
That is a kind-of failover, because if machine A goes down, and the
myotherAejbs.jar are on machine B too, orion will go out and get the bean
from machine B when it can't find machine A. But it doesn't go machine A
then machine B for each remote instance of the bean. You could also specify
the maximum number of instances of a bean, and as one machine gets "loaded",
orion would go to the next available machine...but that's not really
loadbalancing.
That is, you can set up your web-apps with ejbs, but let all of the ejbs be
remote="true" in the orion-application.xml file:
<?xml version="1.0"?>
<!DOCTYPE orion-application PUBLIC "-//Evermind//DTD J2EE Application
runtime 1.2//EN" "http://www.orionserver.com/dtds/orion-application.dtd">
<orion-application deployment-version="1.5.2">
<ejb-module remote="true" path="myotherAejbs.jar" />
<ejb-module remote="true" path="myotherBejbs.jar" />
<ejb-module remote="true" path="myotherCejbs.jar" />
&ltweb-module id="mysite" path="mysite.war" />
... other stuff ...
</orion-application>In the rmi.xml you would define your clustering:
<cluster host="230.0.0.1" id="123" password="123abc" port="9127"
username="cluster-user" />
Tag that is defined if the application is to be clustered. Used to set up
a local multicast cluster. A username and password used for the servers to
intercommunicate also needs to be specified.
host - The multicast host/ip to transmit and receive cluster data on. The
default is 230.0.0.1.
id - The id (number) of this cluster node to identify itself with in the
cluster. The default is based on local machine IP.
password - The password configured for cluster access. Needs to match that
of the other nodes in the cluster.
port - The port to transmit and receive cluster data on. The default is
9127.
username - The username configured for cluster access. Needs to match that
of the other nodes in the cluster.

How can i wirelessly synch my calender and my contacts between my iphone and my ipad

how can i wirelessly synch my calendar and my contacts between my iphone and my ipad

Icloud
http://support.apple.com/kb/PH2576
http://support.apple.com/kb/PH2582

What is the conceptual and functional difference between peripheral target and Enterprise peripheral target?

Dear All,
what is the conceptual and functional difference between peripheral target and Enterprise peripheral target?

Does anyone get a chance to see this ?

VLAN and STP compitability between Cisco 2950 and SRW2048

Similar Messages

Maybe you are looking for