VLAN & DHCP Server setup for voice & Data

We have a single SGE2010 in layer 3 mode switch with a Server 2008 DHCP server.
We will be implimenting a Voip netowork where the PC's connect to the voip phone. I would like to create another vlan - 10. I have created the vlan and assigned the IP on the swtich.
Routing seems to be working. I can ping both IP addresses of the switch on either vlan.
I cannot get DHCP working. In the SGE switch I have enabled DHCP Relay, enabled option 82, set my DHCP Interface as VLan1, and specified the DHCP servers IP address. On the ports I have set the port where the DHCP server connects to as a trunk port with Vlan 1 untagged and vlan 10 tagged. I have set the ports where the phones connect as a trunk port with vlan1 untagged and vlan 10 tagged.
The PC connected to the phone gets an IP from the DHCP server just fine.
The phone does not get an IP address
The scope has been set up on the server.
Any help is appreciated.
Thanks

Uh, I spent HOURS on this. I entered the interface for the DHCP server incorrectly. I thought you entered the interface the DHCP server was on.

Similar Messages

DHCP server application for Snow Leopard

Hey Guys,
is there any DHCP server application for SL?
Want to share the Internet through my laptop and to set up IPs manually.
Thanks in advance

Google search for *dns server mac* brings up many hits, including http://forums.macosxhints.com/archive/index.php/t-45228.html Peruse the results and maybe you'll find a solution.

Unable o Find Oracle Weblogic Server setup for Win 2008 Server 64-Bit

Hi
Unable o Find Oracle Weblogic Server setup for Win 2008 Server 64-Bit machine.
Please provide the dowload links.
Thanks

Please follow this link for download and set requirements for installation of WebLogic 10.3 for Win 2008 Server 64bits:
http://download.oracle.com/docs/cd/E13196_01/platform/suppconfigs/configs/windows2008/win2008_103.html
best regards,
Thiago Leôncio

Download Link for Oracle WebLogic Server setup for 64Bit 2008R2 Server

I need One Information. Can we get Oracle WebLogic Server setup for 64Bit 2008R2 Server. If Yes Please provide me the Dowload Link.
Thanks
Vishwa

Got link ... downloading Setup .. trying for my Luck

How to do Stastical Setup for Master data Loading

Hi All
Thanks a lot for all guys,who are helping me a lot.
I want to do stastical setup for Master data of sales order.I know how to do for transaction data.
But what is the procedure for MAster data in SBIW-Tcode.
Regards
Balaji

Hi,
<i>Actually first we should load data to Master data table and then to Transaction load data.By this reporting performance will be good.Right?</i>
Actually this will decrease the time of transaction data loading .So it improves the loading performance , not reporting performance.
<i>Now I got a doubt from where this Master Data is been loading? and how to load this data.</i>
2LIS_11_VAITM and 2LIS_11_VASCL are the DS for Transaction data , not for master data.To load the master data, first of all find out the master bearing characterstics in the data target.And then search for teh DS of master data in R/3 with tcode RSA6 .You will use characterstic(info object) as the search option here.
For example 0materail is the Master characterstic.
And you can see the DS for this Characterstic in RSA6(if it is not there, you have activate it from RSA5)
0MATERIAL_ATTR
0MATERIAL_LGEN_HIER
0MATERIAL_LKLS_HIER
0MATERIAL_TEXT
With rgds,
Anil Kumar Sharma .P

LTE for Voice & Data

So I recently upgraded to a 6+ I have been with Verizon for 4 years & have never used .5gb of data. Now in just 1 week I have used 2gb! I am on my home internet all day. I did receive this text message from VZW;
You recently enabled LTE for Voice/Data & now have Advanced Calling 1.0. Please visit www.vzw.com/AC1.0/iPhone6 to learn more about the service.
I do not understand the advanced calling, could this be affecting my data usage??

You will almost always see a bump in in data use when going from a 3G phone to LTE phone. I hear people say they do the same, but several factors come into play:
1) browsing is faster so you tend to browse more per unit time
2) Any media you do consume (audio, video) will often get sent to you in a higher quality and thus more data for the same listening or watching time
3) You will buffer ahead more due to the speed using data for things that you may never even consume if you go away from a web page or media before finishing it.
My experience seeing 5 people now go from 3G to LTE in the past couple of years is every single one had increase in data. The lowest was a 50% increase and the highest 200%.
I will also confirm that advanced calling does not use your data bucket (it does use data, it just is not subtracted from your limit). Agree with all the above too.

DHCP scope setup for 3702 APs on Microsoft server

Hello all, thanks for taking a look - I need some help.
5508s running 7.6
3502s widely deployed, but wanting to start planning for 3702s.
Here's my dilemna. Option 43 as-is, simply doesn't work, and I'm having trouble figuring out how to add in the right VCI, or custom DHCP options on our Microsoft DHCP servers...
Can anyone provide me with some screen grabs or PDF instructions to help walk me through this configuration?
Thanks much,
Jason W.
(Here's a link to the doc that led me to believe I need to go down this road, and that there's just s custom DHCP option missing for my 3702 deployment. This link is outdated though.)
http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/97066-dhcp-option-43.html

Hi Jason,
There is a very good explanation from Jeff.(52.50 explains option43/60 on Windows DHCP)
https://www.youtube.com/watch?v=pKEiPCLO3Qk&list=PL_mADa_gji1MYUz-C-VGkLLMl56L4x5Mh&index=4
I believe VIC should be Cisco AP c3700.
Hope this helps.
Regards,
Christos.

Setting port for Voice + Data

Hi,
I have a 3850 stack (core & access - server or user) and a couple 3750 switches ("user" access) I'm setting up to support a VOIP install. The 3750s are trunked to the 3850 stack. All are at current recommended or greater IOS.
Currently I'm trying to determine if the settings I plan on using for ports is correct. I still have routing to button down but I need the ports proper first. I'm a IOS/Cisco newb so please be patient.
Pertinent info:
There are 3 VLANs, VLAN1 - management, VLAN2 - Data, and VLAN10 - voice. VLAN10 will be marked as the voice VLAN on the switch.
The "user" access devices I will connect to a port are either a PC, a Yealink phone, or a Yealink phone+PC. PC traffic arrives untagged. Yealinks will send a untagged DHCP request, receive a DHCP data, reissue a DHCP request with a VLAN10 tag, and all future communication will be vlan10 tagged.
Here's what I have put together so far for the "user" access ports. Command is for one port (I'll use interface range when I actually do this):
config t
: #--clear all settings on port
default interface G1/0/1
: #-- enter interface setup
interface G1/0/1
description VoiceData
: #-- set port to trunk mode
switchport mode trunk
: #-- set port to 802.1q which allows tagged traffic (phone)
switchport trunk encapsulation dot1q
: #--we only allow tagged 10, all else is untagged & switch tagged to vlan 2.
switchport trunk allow vlan 10
switchport trunk native vlan 2
: #--speed port init with portfast
spanning-tree portfast
end
Am I on the right track? Other commands I should include? Will the switch prioritize the VLAN 10 traffic automatically since I have VLAN10 set as voice or do I need to issue a switchport voice vlan 10 command for the port?
TIA

Thanks Charles, that appears to be working. Until I get this fully working I'm not going to split management & data, so vlan1 & 10 is all for now.
I'm now trying to get connectivity to the server (VMWare VM). I don't seem to be able to get any communication when it is set to static in the vlan10 subnet (10.10.1.1/24). With the NIC in vlan1 subnet (dhcp) it works perfectly. I tried smartport desktop, smartport trunk, the settings above (both of them) and nothing seems to work. The server will need to talk in both subnets/vlans.
Server cannot ping out and the switch cannot ping it. Initially I thought it was a routing issue. Settings look good though (core switch):
ip address 10.1.4.254 255.255.0.0
interface Vlan1
description Mgmt+Data
ip address 10.1.4.254 255.255.0.0
ip helper-address 10.1.1.13
interface Vlan10
description Voice
ip address 10.10.1.254 255.255.255.0
ip helper-address 10.10.1.1
ip default-gateway 10.1.4.3
ip http server
ip http secure-server
ip route 0.0.0.0 0.0.0.0 10.1.4.3
I did some dhcp debugging for a phone and it communicates with the vlan1 dhcp server but when it then tries to talk to 10.10.1.1 (VM server) there's no response.
I then figured I had a NIC problem, but with it working perfectly fine with the vlan1 subnet setup my OS appears good.
All this leads me to believe I don't have the port set up properly.
Ideas?

SRW224G4 w/ vLan DHCP NAK responses for Macbook!

HI all,
After some wireshark, I see that when I have a vLan on the switch, only win7 gets IP, my macbook doesn't, sniffing to the bootp, I see that the DHCP sends NAK and after I only have DISCOVER & OFFER...
When I get the same switch and the same router and take out the vLan on the switch, everybody get an IP.
What's the deal with this switch and vLans and Mac OS x ???
Do I have to setup something else ?
cheers

DHCP NAK means the DHCP server is refusing to give an IP to the client. it might be that the client is requesting an already used IP, or is requesting an IP that does not fit within the scope defined for the VLAN or network the client is on. in any case, the NAK is not likely because of the the switch. check your dhcp server logs.

Beginner installing SQL Server 2014 for Excel Data Mining

Hello, I'm a complete beginner with servers but Im desperately trying to gain access to the SQL server for use with the data mining addin for excel.
Could someone please help. When I try to make a connection in Excel by choosing DATA MINING> <No Connection> New> it then asks me for a Server Name in the connect to Analysis Services box. How can I find out what my Sever name is please? I have
tried all sorts of names that I have found such as SQLEXPRESS or localhost but nothing works. It also tells me to 'Ensure that the Server is running'. Another error message I receive: No connection can be
made because 'the target machine actively refused it'.
I would be really grateful for some troubleshooting tips.
Thank you

Hi Alberto,
Thanks very much for getting back to me.
Here are the results of the Analysis Services report:
Microsoft SQL Server 2014 Setup Discovery Report
Product
Instance
Instance ID
Feature
Language
Edition
Version
Clustered
Configured
Microsoft SQL Server 2014
SQLEXPRESS
MSSQL12.SQLEXPRESS
Database Engine Services
1033
Express Edition
12.0.2000.8
No
Yes
Microsoft SQL Server 2014
SQLEXPRESS
MSSQL12.SQLEXPRESS
SQL Server Replication
1033
Express Edition
12.0.2000.8
No
Yes
I then ran the System Configuration Checker and these are the results:
Passed: 9. Failed: 1.
Edition WOW 64 Platform Failed
(I can't paste the images as my account has not been verified)
Should I assume that I have installed the wrong version? I am running 64 Bit Windows 8.
I just need the most basic version for personal data analysis in Excel with the Data Mining Add-in.
Thanks again

Configure DHCP Server options for Internet Sharing?

Good morning, all.
I have a Sprint (Sierra 595U) AirCard internet connection, which I'm sharing over my AirPort (using OS X's built-in Internet Sharing) to several Windows clients in my office. I see that when Sharing is enabled, en1 takes on the address 10.0.2.1 by default, as well as the role of default gateway/router and DHCP server for the Windows clients.
My question is: Can I configure the IP addresses and DHCP options for Internet Sharing to another address/mask scheme?
Just like I changed my home wireless network away from the default 192.168.1.0/24 for security reasons, I'd like to do the same here.
Thanks and Regards,
BrooklynWalker

Some paranoia is good.
Yes, of course security paranoia can be cultured. like yogurt
I googled.
This might help:
http://www.aleph0.com/computing/macosx/dhcp-setup/
but from what I just read, changing away from the default net & mask might be putzy.Some other discussions for you:
http://www.macosxhints.com/article.php?story=20050331194834746
or you might see something here that helps.
Sorry not to be more specific. Hard to tell if you already googled for yourself.
I'll let someone smarter than I am take a look for you, here.

Dhcp server setup

I am trying to setup a dhcp server.
I am using the following dhcp.conf:
option domain-name-servers 192.168.2.1;
default-lease-time 86400;
max-lease-time 604800;
authoritative;
subnet 192.168.2.0 netmask 255.255.255.0 {
range 192.168.2.5 192.168.2.55;
filename "pxelinux.0"; # the PXELinux boot agent
option subnet-mask 255.255.255.0;
option broadcast-address 192.168.2.255;
option routers 192.168.2.1;
when I try to start the server with "/etc/rc.d/dhcpd start"
I get this:
Starting dhcpd............. [FAIL]
in dmesg I see this:
dhcpd: no ipv6 routers found
are they linked? is dhcpd failing because of no ipv6 routers? or am I missing some configuration?

forget about IPv6, it is not a major problem
1 Do you need your server for pxe booting? I don't know much about it...
2 What is the name of the dhcp server you're using there? Are you sure that the config file is called dhcp.conf? ( for the dhcp package it has to be dhcpd.conf)
3 Is your IP address range correct? I mean are you on the same network as your future clients and you share the same IP range? If your server is not on the same network it will not work...
I've tried your config with my machines, it works fine - after I've modified the IP range for my network ( 192.168.1.x)

IP address not refreshing with new DHCP Server setup

Hi all,
This is a strange issue that I am lost. I had a different Gateway with a Built in DHCP server on 192.168.0.1 IP address. I installed a new DHCP Server with an IP address 192.168.1.1, but when I connect to the Wireless network with the correct password, I still get an IP address in the old IP range.
I have done a security wipe with the same result.
Does anyone have any ideas on what I need to do to flush out all the IP information?

Yes,
That is what I ended up doing, altho it seems very weird. I figured out how to correct it, but still am not sure why it happend.
1. Changed my DHCP Serer IP to 192.168.0.1
2. Went into the Client list and deleted the IP for the Playbook.
3. Changed the DHCP Server IP back to 192.168.1.1
4. Playbook has new IP.
Anyone with ideas why this happened I would be interested in their thoughts!!!

DHCP Server Daemon for Aironet

Hi,
does Cisco Aironet acts as a DHCP server for the wireless client?
Thanks.

Nope...Cisco Access Points can't work as a DHCP server for the wireless clients..Tejal

E1 for voice/data

We have an existing NORTEL PBX in the main branch and a NORSTAR key system in the remote branch, with E1 connection in between provided by the carrier (leased line). There are 100 analog voice users in the main branch and 8 analog voice users in the remote branch. I want to utilize this E1 connection for voice and DATA applications. Please advise the solution. Thanks -rommel-

Because you don't say anything about any routers or any other devices capable of pachet switching, I suppose you carry on your E1 link only analog voice. The previous answers point out a VoIP solution...but in the same time you can use for example 2 CISCO 2610 with one VWIC-MFT-2E1-DI interface card on each one of the 2 routers...and beginning from here everything is very simple: a number of timeslots (nx64kbps) from the 30 you have on the E1 link will form a serial interface wich can be used to carry data, and the rest of the 64kbps channels will be cross-connected to the PBX.
This is exactly what I have done with one of our clients which has 2 PBXs connected with an E1 link. Following the same idea, he can now use 1Mbps for data transmission and the rest of the E1 link (14 channels for analog voice). You can adapt this to your needs.
Of course, using this idea you will have fewer simultaneous calls than with VoIP solution, but in the same time you will have the call quality specific to analog calls. (anyway, the maximum number of simultaneous calls you need over the link is 8)...and, of course, you don't have to worry about QoS.
The choice is yours...for example, our client didn't want to implement VoIP.
I have implemented both solutions till now, and I can tell you both of them work nice and smooth...

VLAN & DHCP Server setup for voice & Data

Similar Messages

Maybe you are looking for