Vlan in the wireless lan

Hi to all,
if i create 2 vlan and i configure 2 ssid one for each vlan, this two vlan are created only for the wireless interface? Or i need to reconfigure all the lan equipment for this 2 vlan?
If i configure 2 vlan and the relative ssid i need two bvi interface configured with two different ip-address or i can use only one bvi with one ip address?
Thanks and best regards,
Carlo S.

The vlans are not only created for the wireless interface but also for the ethernet. Then the ethernet interface has to be connected with a switch that supports vlans. After that, it's up to you to do whatever you want with the vlans you created.
You don't need 2 BVI IPs. You only need one to be able to manage the AP

Similar Messages

I cannot change the wireless LAN encryption WEP settings

Dear all,
I have a WRC-1000 which I did not use for about year and a half. Now I reconnected the unit and during the configuration I cannot change the wireless LAN settings for security (WEP). No matter what I do it keeps stuck on 128 bit WEP.
It also does not show the WEP key settings (so the screen where I should configure the WEP key).
This is what I have done so far: Full reset, reload default configuration, updated to latest firmware. Still no change. I suspect a hardware failure. Is this a memory failure (flash)??
Can someone help me out?
Thanks in advance

Hi
Do you speak about the router settings or about the WLan setting on the notebook???
Did you try to use a Wlan connectivity tool like Intel ProSet Utility or Atheros WLan client utility?
Depending on your WLan card I would recommend checking these both tools and try to establish the WLan connection using one of these programs!

What should I download as the wireless LAN driver/adapter

When I search for a wireless LAN driver in the hp site there are 8 or more wireless LAN drivers/adapters under different names. I do not know what exactly I need. please help me. I downloaded Mediatek 802.11wireless LAN adapter driver but I couldn't connect to any other laptop's wifi hotspot. Sometimes it says "Connecting to the connecting to the network is taking longer than usual".Because of this I can not play LAN games. I know the connection is limited but connecting to the network should be fast and there should not be any problem with it.

Hi there , Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. I understand that you are looking to find out which Wireless LAN driver you should download for your Wireless Adapter. If you look under your device manager, what does it say under Network Adapters ? You can right click on the Network Adapter it lists and click Update Driver Software right there. Do you have any exclamations marks or red x's? Your could also use the HP Support Assistant to make sure that all of your updates have been done. That would put the proper driver in also. If you want to use the HP Pavilion 15-n240tx Notebook PC Driver Webpage, all you have to do is find out what the name of your Network Adapter is in your Device Manager. (Picture above) Please follow these provided troubleshooting steps, re-post and let me know how everything went. Thank you! Have a great day!

Where's the Wireless LAN Item?

The E61 instructions (p61) says you can have your device show WLAN availablility by going to
Menu>Connect.>Wireless LAN.
But I don't have Wireless LAN under Connect. Anyone else have this missing?

menu > Tools > Settings > Connection > Wireless LAN > Show availability > Yes
menu > Tools > Settings > Connection > Access points > Options > New access point and for "Data bearer" choose "Wireless LAN" + the rest depending on what your WLAN/WiFi access point/router settings are.
In the browser (Web) app settings (Options > Settings on the bookmarks page), change "Access point" setting to "Always ask".

Can some please help me with the Wireless LAN Connection Configuration?

I want to configure WLC in my Testing Lab , need help with the step by step configuration of WLC.

Please go through the below link for the Basic Wireless LAN Connection Configuration Example.
The below link has end – end configuration steps with the images.
http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/68005-wlan-connect.html
Have i answered for your query.

How to improve the wireless LAN coverage?

Hi all,
We are using Cisco 1200 access point in our small retail shops and use some wireless heldheld devices to connect the wireless network. Since the shops are inside the shopping plaza, there are many other wireless access point which interference our wireless clients. The access point were installed in the middle of the shop, sometimes, our client walked to the shop entrance (< 10m from the access point), the wireless network was disconnected and it may try to connect the other unknown access point. I tried to change the frequent but it doen't help. We are using a pair of 2.2dBi Dipole Anntenna wit the AP and mount in on the wall (~ 1m above the ground). Is there any suggestions to improve the coverage? Is there any improvement if I use a more powerful anntenna (e.g. 6.5 dBi Wall Mount anntenna)?
Thanks,
Dovelet

Dovelet,
I was going to suggest upgrading your AP to 802.11a but you are probably using Symbol handhelds and they don't support 802.11a yet (for that matter I don't think there is a handheld that supports 802.11a yet).
Use a computer and scan the airwaves to see what APs are out there and what frequency they are on. Configure your AP to a different channel either 1,6 or 11 (that no one else is on).
Put two 6 dBi Patch Wall Mount Antennnas 3 to 4 feet apart on one wall, part # AIR-ANT2460P-R. If you have a long narrow store the patch antennas will be your best bet, They have a narrow beam and you will get less multipath distortion from the radio waves bouncing off your walls. You can also get an Antenna mount kit, part # AIR-ACC2662 to help better aim your patch antennas.
If you have a square or circular store place two omnidirectional antennas in the center of the store, use a high grade low loss cable like part # AIR-CAB100ULL-R. Or for that matter put your current AP high in the center of the store. Run Cat5e cable to it and use a Power Injector to provide power to your AP over the cat5e. You can also add the high gain omnidirctional antennas (2 of them) to this configuration without needing the low loss cable.
These are powerful antennas and you don't want your signal going into the store across the way from you. So take a laptop or your hand held walk across the way to the front of the store and see what kind of signal you get. Reduce the power setting of your AP so the signal doesn't bleed into the store across the way from you and if you use omnidirectional antennas into stores on either side of you.
Make sure you mount the antennas high 8 to 10 feet. I assume you have your Encryption set,SSID broadcast disabled and your handhelds configured to only connect to your APs SSID.
Hope this helps.
Robert

Why does Airport take so long to connect to the wireless LAN?

I have one of the Core 2 Duo MacBook Pros. I notice that whenever I wake up my Mac from sleeping, it takes a good 10 seconds for it to find and connect to the LAN. By contrast, Windows computers seem to find it and connect almost instantly.
Aside from having WEP encryption, there's nothing special about my LAN. It's a Linksys WRT54G, and I'm not hiding the SSID. Also, my home network is at the top of my list of preferred networks.
Once connected, I don't notice any problems. I haven't tried any specific tests of local throughput, but web browsing and other internet traffic with the Mac is no slower than the top speed of my broadband connection.
Also, I've talked with other Mac users, and they don't report wireless connections taking so long to be established.
So, what's going on here and how can I fix it?
Thanks!

My guess is that your connection will appear even faster, although I have no explanation for that, only my experience since I installed the same update.
Yes, your MBP firmware appears to be up to date, although the documentation is confusing. If your firmware wasn't updated at all, it would probably end with 00, instead of 01.
Software Updates needed for Macs will appear in Software Update's automatic offerings. I'm not sure what might have happened with the AirPort Extreme Update, although I suspect it might have only been called for if a Mac was using an Apple Base Station.
If you use Software Update to do your updates, you can check the Software Update panel of System Preferences, and on the "Installed Updates" pane, scroll down and check to see what was installed and when. I installed the same AirPort update the day after release - but then I was having an issue and was checking Software Update every day for that update to show up for my iMac Core Duo.
[I'm not sure that firmware updates are listed there at all, perhaps only software updates.]
To check for all downloadable updates on your own, click on "Downloads" in the Support menu bar at the top of this page. That's where firmware updates will appear if they are not included by Software Update. The last firmware updates have been appearing in Software Update. The first in 2006 didn't, but that created so much confusion among new users that I have a feeling that Apple has changed the procedure to automate it rather than have it be search and find:) Only time will tell.
Your mention of your printer - you could check to see if Samsung has a firmware update for your printer, but no, you can't use a mixed network, you need everything connected to be using same encryption method with same network name and same password.
I believe I understand the new AirPort Extreme "n" Base Station will support two separate simultaneous networks like that, one on the 5MHz band and second on the 2.4MHz band, but the older equipment can't do that.

How to find the Wireless LAN adaptor on my Satellite L350-21U

Today I received a message through Toshiba Tempro that an update for the LAN driver is available for my laptop which has Windows7.
However there are some possibilities i.e. INTEL, ATHEROS or REALTEK.
How can I find which LAN driver is installed on my laptop.
Please note that I am not so familiar with computers.
A step by step instruction would be appreciated !

Your notebook have Intel WLAN card but if the WLAN works well don't change anything.

Upgrading the wireless LAN card

I want to upgrade my current wireless card (802.11b) to a 802.11a/b/g card.
Where can i find one?
what is the part number?
My model number is 23737FU (Thinkpad T41)
Solved!
Go to Solution.

FWIW that card can be purchased on eBay brand new for $40...and yes, a genuine one with a FRU...
I hate when I have to disagree with Mr. Bolton whose opinions and knowledge I hold in very high regard, but many people (myself included) have bricked their laptops using the aforementioned patch/hack/name it as you like it...
Hope this helps.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

I'm having problems with the wireless LAN Guest and Windows 7

Only with Windows 7 when a user logs in in the Guest WLAN two connections appear in Windows 7, the user authenticates on the page but does not leave the internal network. Can someone help me with this?
We uses WLC 4400 and LAP 1252

I have the same issue. Using webauth and Windows 7 and IE9 and windows 7 and firefox. Also MAC\Safari.
Client gets an IP address, accepts the certficate error message. But never gets to the webauth page.
I have a TAC open so will update when i get more info.

Wireless LAN Controller- WLAN/SSID

Can we assign the smae SSID to different VLANS on the wireless lan controller?

Can we assign the smae SSID to different VLANS on the wireless lan controller?
Depends on the firmware you are running.
If you are running 7.0.116.0 then you can use a feature called Interface Groups.

AIR-CAP3501I access point not joining the Cisco 2100 Wireless Lan controller.

Hello All,
I am installing a new LAP (AIR-CAP3501I ) through the wireless lan controller (AIR-WLC2112-K9) with software version 7.0. I have an external ADSL modem which will act as the DHCP server for the wireless clients and the LAP.
Please find my network setup as below:
The ISP ADSL modem , WLC and LAP are connected to a unmanaged POE switch. The LAP gets its power through the POE switch. When i connect the LAP and the WLC to the switch along with the ADSL modem, the LAPs are getting the ip address from the ADSL modem, however they are not joining the WLC for further process.
ADSL Modem ip address: 192.168.1.254
Management ip address on the LAP: 192.168.1.1 ( Assigned to port 1, untagged Vlan).
Ap Manager ip address: 192.168.1.1 ( Assigned to the same port i.e port1, Untagged Vlan).
The LAP is getting an IP address from the ADSL modem in the range of the DHCP scope.
I will paste the logs very soon.
Please let me know if i am doing anything wrong oe what will be the issue.
Thanks in advance,
Mohammed Ameen

Hello All,
Please find the logs for "debug capwap event" from the WLC below:
*spamReceiveTask: Sep 26 19:44:59.196: e8:04:62:0a:3f:10 Join Version: = 117465600
*spamReceiveTask: Sep 26 19:44:59.197: e8:04:62:0a:3f:10 Join resp: CAPWAP Maximum Msg element len = 92
*spamReceiveTask: Sep 26 19:44:59.197: e8:04:62:0a:3f:10 Join Response sent to 192.168.1.156:45510
*spamReceiveTask: Sep 26 19:44:59.197: e8:04:62:0a:3f:10 CAPWAP State: Join
*spamReceiveTask: Sep 26 19:44:59.197: e8:04:62:0a:3f:10 capwap_ac_platform.c:1216 - Operation State 0 ===> 4
*apfReceiveTask: Sep 26 19:44:59.198: e8:04:62:0a:3f:10 Register LWAPP event for AP e8:04:62:0a:3f:10 slot 0
*spamReceiveTask: Sep 26 19:44:59.341: e8:04:62:0a:d1:20 DTLS connection not found, creating new connection for 192:168:1:158 (45644) 192:168:1:2 (5246)
*spamReceiveTask: Sep 26 19:45:00.119: e8:04:62:0a:d1:20 DTLS Session established server (192.168.1.2:5246), client (192.168.1.158:45644)
*spamReceiveTask: Sep 26 19:45:00.119: e8:04:62:0a:d1:20 Starting wait join timer for AP: 192.168.1.158:45644
*spamReceiveTask: Sep 26 19:45:00.121: e8:04:62:0a:d1:20 Join Request from 192.168.1.158:45644
*spamReceiveTask: Sep 26 19:45:00.123: e8:04:62:0a:d1:20 Join Version: = 117465600
*spamReceiveTask: Sep 26 19:45:00.123: e8:04:62:0a:d1:20 Join resp: CAPWAP Maximum Msg element len = 92
*spamReceiveTask: Sep 26 19:45:00.124: e8:04:62:0a:d1:20 Join Response sent to 192.168.1.158:45644
*spamReceiveTask: Sep 26 19:45:00.124: e8:04:62:0a:d1:20 CAPWAP State: Join
*spamReceiveTask: Sep 26 19:45:00.124: e8:04:62:0a:d1:20 capwap_ac_platform.c:1216 - Operation State 0 ===> 4
*apfReceiveTask: Sep 26 19:45:00.125: e8:04:62:0a:d1:20 Register LWAPP event for AP e8:04:62:0a:d1:20 slot 0
*spamReceiveTask: Sep 26 19:45:00.273: e8:04:62:0a:d1:20 Configuration Status from 192.168.1.158:45644
*spamReceiveTask: Sep 26 19:45:00.273: e8:04:62:0a:d1:20 CAPWAP State: Configure
*spamReceiveTask: Sep 26 19:45:00.273: Invalid channel 1 spacified for the AP APf866.f2ab.24b6, slotId = 0
*spamReceiveTask: Sep 26 19:45:00.274: e8:04:62:0a:d1:20 Updating IP info for AP e8:04:62:0a:d1:20 -- static 0, 192.168.1.158/255.255.255.0, gtw 192.168.1.254
*spamReceiveTask: Sep 26 19:45:00.274: e8:04:62:0a:d1:20 Updating IP 192.168.1.158 ===> 192.168.1.158 for AP e8:04:62:0a:d1:20
*spamReceiveTask: Sep 26 19:45:00.274: e8:04:62:0a:d1:20 Setting MTU to 1485
*spamReceiveTask: Sep 26 19:45:00.274: e8:04:62:0a:d1:20 Finding DTLS connection to delete for AP (192:168:1:158/45644)
*spamReceiveTask: Sep 26 19:45:00.274: e8:04:62:0a:d1:20 Disconnecting DTLS Capwap-Ctrl session 0xa06d6a4 for AP (192:168:1:158/45644)
*spamReceiveTask: Sep 26 19:45:00.274: e8:04:62:0a:d1:20 CAPWAP State: Dtls tear down
*spamReceiveTask: Sep 26 19:45:00.277: spamProcessGlobalPathMtuUpdate: Changing Global LRAD MTU to 576
*spamReceiveTask: Sep 26 19:45:00.277: e8:04:62:0a:d1:20 DTLS connection closed event receivedserver (192:168:1:2/5246) client 192:168:1:158/45644).
The Acess point joins the Controller for 2-3 seconds and then unjoins again. I am not sure what i am doing wrong here. The access points are getting the IPs from the ADSL modem through the switch, then it talks to the WLC, however it does not join the controller for further process.
Note:
The Managemnet interface and the AP manager interface are assigned to the same port 1 with unassigned Vlan as mention above.

Wireless LAN does not work after restart

Hey
My brand new laptop suddenly went blank earlier today and when I restarted it I noticed my wireless internet won't work. It is also asking me to install some new driver, the Network Controller? I am confused as everything was working fine and suddenly it's not. Anyone any ideas? :-/

Hi,
maybe you should try to install the driver for your wireless lan card. I mean, if some application damaged the driver or installed something which interferes with the wireless lan card then you should try to fix it with an reinstallation of the driver.
Heres a [LINK|http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp] to the drivers download page from Toshiba. Pick your model and your operating system and download the driver which fits for your wireless lan card.
Greets

Ipod break down wireless lan

Hello everybody,
i have a problem with my new iPod touch 4. I have a wireless network with 2 laptops and want to integrate my iPod. When I activate the wireless lan of my iPod and my laptop is on the net, everything is ok. If my laptop isn't on the net and I activate the iPod, the wireless lan breakdown. The Same presiture happens after while when both (iPod and Laptop) are on the net. The only thing what help, is to reboot the router and reset the networksettings of the iPod. Then when the Laptop is again on the net and I enter the wireless lan key for my network in the iPod I am again on with my iPod. But Apps and Music I can't download with my iPod. If I want to do that, I only get the load screen. The samething happens when my Apps want to log in the internet. But Safari works. On my Laptop I have Windows Vista. My Router is a T-Sinus 111 DSL. Has anybody a idea how I can get a firm wireless lan connection on my iPod.
Thanks a lot for the Help

Can't somebody help me? Please I am really despaired

Why does Satellite L300-10Q not recognise a wireless lan

This new laptop computer is working ok on a wired LAN but does not recognise a Wireless Lan. Got message that no networks can be found. In the same room with another Toshiba Laptop the wireless LAN is found and has a good signal strength.
The switch for wireless LAN is turned on and "antenna" pictogram led is burning red.
Seems that it is not configurated for detection. Any Idea how to solve this?

Thanks for your reaction. But on the other working laptop several wireless access points can be "seen" in the area and on this laptop none. When wanting to contact a LAN it constantly refers to not a network cable connected and no wireless LAN access points can be seen unfortunately.
The system it works on for both laptops is Vista Home edition premium. Checked if the system was not set on "off line" working; what else can be checked to know that automatic detection is set and that the system is looking for the wireless points ?
greetz Tim

Vlan in the wireless lan

Similar Messages

Maybe you are looking for