VLAN Map issue

I have an issue with a VLAN map I am attempting to use to filter traffic. It is a flat Layer 2 LAN so all hosts are in VLAN 1. I have a number of test machines that I want to deny access to live database servers. To do this I tried the following:
ip access-list extended testboxes
permit ip host x.x.x.x host x.x.x.x
vlan access-map denytest 10
match ip address testboxes
action drop
vlan filter denytest vlan-list 1
Once I apply the VLAN map I lose all connectivity to the switch. Is there something I am missing here?
Thanks
Ian

Unlike regular IOS standard or extended ACLs that are configured on router interfaces only and are applied on routed packets only, VACLs apply to all packets and can be applied to any VLAN. If a VACL is configured for a certain traffic and that traffic does not match the VACL, the default action is deny. Additionally, VACLs have an implicit deny at the end of the map; a packet is denied if it does not match any ACL entry, and at least one ACL is configured for the packet type. Add an additional permit statement allowing telnet/ssh/or web traffic to the switch:
permit tcp host X.X.X.X host X.X.X.X eq telnet
Best Regards
Francisco

Similar Messages

Hreap vlan mapping issues

wlc 5508 code 7.0.220.0
AIR-CAP3502E-N-K9
ap mode: hreap
vlan mapping native 30
vlan ssid x 310.
each time that for what ever reason my access point goes down(not that my access point resets by itself, if i have to move it), the setting in the vlan mapping resets to whatever my native vlan is, in this case 30
that is native vlan 30
ssid x vlan 30
any idea.

it could be
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtw92394&from=summary
but it is marked Unreproduceable. You might try upgrading to the latest 7.2 code if you don't have 'legacy' AP.
HTH,
Steve
Please remember to rate useful posts, and mark questions as answered

HREAP VLAN Mapping

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin-top:0cm;
mso-para-margin-right:0cm;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0cm;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;
mso-fareast-language:EN-US;}
Hi,
I've searched around to see if someone else has experienced the same issue regarding HREAP AP's losing their VLAN mappings; however I could not find any related topics.
Scenario
I've got a 5508 WLC running ver 7.0 with local VLANs assigned as follow:
VLAN 241 - Data Users
VLAN 253 - Voice Users
The HREAP AP's (Cisco 1242AG) running at the remote branches is mapped to the following:
VLAN 2 - Data Users
VLAN 253 - Voice
The Problem...
HREAP works perfect; users get the local DHCP addresses at the branch office and have no issues with connectivity. Once and a while some of the HREAP AP's will lose the VLAN mapping I've assigned to them. In this case I've mapped VLAN 2 to the SSID for the Data Users, I will get complaints that users can't connect to the network when I go check the HREAP AP's VLAN mapping it defaulted back to VLAN 241 (the same VLAN the local AP's at head office use for the same SSID). Of course with the Voice SSID I don't have this problem as it's using the same VLAN ID as head office.
Once I've corrected the mapping everything works perfect.
Why...
I just want to know why this happens, I've rebooted the AP's to see if they retain the mappings and they did. I've seen in the HREAP design deployment that it is preferred to use the same VLAN ID's of the head office where the WLC is located as for the same to the branch offices where the HREAP AP's are located.
I can see why as this will resolve my problem, however this network was designed without the knowledge of HREAP being deployed to the remote sites and I would like to minimize change from a LAN perspective.
Will this be my only solution by standardizing the branch office VLAN ID's the same as the head office network or should I be able to use different VLAN ID's for the branch offices?
Thanks for your time reading this and for your input. If you know any discussion regarding this, please add the url.
Regards
Jurgens

Hi,
I'm having the same problem. And I have two WLCs (WISM) with 7.0.220 version.
I think because of this BUG: http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtw92394&from=summary
Anyone knows how can I solve this problem?
I Have 42 HREAP APs, and when I have some link problem on the remote Branch and the AP lose for a few seconds Connectivity to the 1º Controller its loses the VLAN Mappings (all turned to the Native VLAN).

Lost VLAN Mapping on WLC 5508 (Flexconnect)

Hi guys, I have a WLC 5508 and some AIR-LAP1131AG-T-K9 all in flexconnect configuration.
The problem is that 1130 Access Points lost the VLAN Mapping configuration without reason, simple change the vlan mapping to 999 and I need to reconfigure that.
I search in some documents on cisco.com but I can't find anything about this issue.
Could you help me please?
Thanks guys.

Hi Scott
Thanks for the answer.
We have around 350 ap's, in 50 different locations (customers). The WLC is running AirOS 7.3.101.0.
Every WLAN is configured to a dummy interface, with the vlanID 2222.
This is the VlanID that the Wlan to vlan mapping got “lost” to.
Unfortunately, I am not able to see the right join time, because the WLC’s was booted. (After the error occurred). Next time I see this, I will look at the join time.
Every location (costumers) has two SSID (guest and employee). The employee network has two vlans (PC’s and BYOD). We are using NPS rules to select witch VLAN the device connectes to.
So in the FlexConnet settings, we do a WLAN to vlan mapping:
GUEST to vlanID
PC’ to vlan ID 5
And in the FlexConnect group we but in the vlan ID for BYOD.
Do you now if the AP stores this to configurations different (flash or RAM)?

Vlan mapping missing from flexconnect AP

I am having
issue with flexconnect mode AP. They are losing vlan mapping very frequently. I need to reconfigure the vlan mapping then only client starts getting IP addresses. Please let me know what may be the issue.
AP model: AIR-CAP3602I-N-K9
WLC model: AIR-CT5508-K9
Regards,
Vijayanand

The configuration on the controller must be the same between the time the access point went into standalone mode and the time the access point came back to connected mode. Similarly, if the access point is falling back to a secondary or backup controller, the configuration between the primary and secondary or backup controller must be the same.
You need to configure the Flex connect AP—switch --- controller , for the example to go through proper steps.
http://www.cisco.com/en/US/docs/wireless/controller/7.2/configuration/guide/cg_flexconnect.html#wp1225028

AP Flex-connect VLAN mapping auditing

I am trying to find a way to conduct auditing for VLAN mapping for AP in flex-connect mode.
I have seen the mapping changed due to AP reboot or other reasons untill the user reporting connection issues. I have looked NCS, and have not found a reporting function for this. Anyone uses script to do so?

I also have created WCS/NCS/PI templates to push the WLAN to vlan changes in the early morning just I'm case. When users start complaining, it's faster to just push out the commands to all than trying to find what AP lost its vlan setting.
Sent from Cisco Technical Support iPhone App

XSLT mapping issue in parent child relation

Hi Guys,
i have one XSLT mapping issue. Mapping scenario is from IDoc to file.
IDoc structure is as below
<ZLOIPRO1>
<E1AFKOL>
 <A></A>
 
 <E1RESBL>
 <MATNR>1</MATNR>
 <CHARG>1</CHARG>
 <ZSBL>
 <MTART>ABC</MTART>
 </ZSB>
 </E1RESBL>
 <E1RESBL>
 <MATNR>2</MATNR>
 <CHARG>2</CHARG>
 <ZSBL>
 <MTART>ZHA1</MTART>
 </ZSB>
 </E1RESBL>
 <E1RESBL>
 <MATNR>3</MATNR>
 <CHARG>3</CHARG>
 <ZSBL>
 <MTART>ZHA1</MTART>
 </ZSB>
 </E1RESBL>
</E1AFKOL>
</ZLOIPRO1>
As you can see 'E1RESBL' is repeatative. Now my issue is i need to select 'MATNR' and 'CHARG' from 'E1RESBL' segment when first occurance of 'ZSBL/MTART' with value 'ZHA1' appears. i.e. my output would be MATNR = 2 and CHARG = 2.
I hope i am clear. Please let me know if any solution for this.

Hi,
Try this
<xsl:if test="./ZSBL/MTART == 'ZHA1'">
<xsl:for-each select="./E1RESBL">
<MATNR>
 <xsl:value-of select="./MATNR"/>
</MATNR>
<BATCH>
 <xsl:value-of select="./CHARG"/>
</BATCH>
</xsl:for-each>
</xsl:if>
You might need to do some changes in the above.
Thanks,
Prakash

EA4500 – Smart Wi-Fi interface and Windows Network Map issues

I purchased this Router about 2 weeks ago as a phased upgrade of our Home Network, primarily to enhance media streaming. It has the latest firmware preinstalled from the factory. Prior to the purchase and installation of the EA4500 Router I replaced my old Motorola SurfBoard SB6120 DOCSIS 3.0 Cable Modem with a Motorola SurfBoard SB6141 DOCSIS 3.0 Cable Modem. My old Linksys E2000 Router worked perfectly with the SB6141, with the exception that the E2000 wasn’t IPv6 enabled, but does have 10/100/1000Base-T Ethernet (RJ-45) and Internet ports.
The EA4500 has been installed for about 10 days and seems to have improved local network speeds and I don’t seem to be having any Internet connectivity issues. However, there are some disturbing issues with the EA4500 and the AE3000 I purchased. There are 11 devices connected through the Router; a Dell Desktop (wireless with the AE3000), a Dell Desktop (Ethernet), a Dell Laptop (wireless), 2 Canon Printers (1 Ethernet and 1 Wireless), 2 Western Digital 1TB MyBookLive Network Drives (both Ethernet), a WD TV Live Streaming Media Player (wireless), an Apple TV media player (wireless), an iPad (wireless), and an Android Smartphone (wireless).
Issue 1 – The Linksys Smart Wi-Fi interface appears to be unreliable at times!!! I’ve read about this problem here on the Community involving the EA6500, so I don’t know if this is a Linksys Server issue, as suggested in a few responses, or a bug in the Router firmware, or defective hardware. However, when the interface locks up, it can’t be accessed from a wireless or wired connection. Usually, powering down the Router and then powering it back up and restart will allow it to function again. However, at times before the interface completely locks up it shows either just a white screen or the security screen will show no firewall features enabled. This is a little scary, so I’ll do a complete reset and setup; this is becoming a pain in the rear!!!!! Is there any hope for this being fixed, in this Router, not the next generation??????????
Issue 2 - All of my network devices show up in the Router’s Device List. Except for the Apple devices they also show up, when they are online, in Windows 7 Explorer under Network and when you click on Network they are correctly displayed as Computers, Media Devices, Network Infrastructure, or Storage. However, when you click on “Open Network and Sharing Center” and then click on “See Full Map”; it fails with the response “Windows cannot create the network map. Responses from other devices on the network are delayed or there is an incompatible router on the network”; no device map is shown. When I follow the link for more information, the only thing that stands out is “A device on the network, such as a hub or switch, is not working properly or is not compatible with the Link Layer Topology Discovery (LLTD) protocol, which Windows uses to create the map. To fix this problem, disable the device, turn it off, or remove it from your network”. All of my network devices showed up on the Network Map with the old E2000. This issue is the same on all of my computers, either wired or wireless. Any known solutions for this, or is it as Windows suggests; an incompatible Router????
Thanks in advance for any insight or solutions. With the issues I’m having with the EA4500 and the AE3000; they are both probably going back to Amazon.

thebluemamba_24; Thank you for your suggestion; I finally found time yesterday to perform an extensive evaluation before I return the Router. However, rather than trying to add devices manually, my rationale was if the EA4500 can’t process them correctly, automatically, it needs to be returned anyway, so I added devices normally letting the device an Router handle the process.
In thinking through this issue, all devices on our network are detected and identified by Windows Explorer on Windows 7 computers; except of course the Apple and Android devices (Apple TV, iPad, and Smartphone). So, I wondered if one of those three devices being added to the Router’s device list was somehow causing issues or interfering with Windows 7’s ability to generate a Network Map. Therefore, my approach was to turn off or disable all devices on our network, reset the Router to factory defaults, reestablish the Router to my custom Home Network configuration using a Windows 7 PC that has LAN and Wireless access to the Router, then add one device at a time and check with each addition to see if Windows 7 could still generate a Network Map.
With the Router reset and reestablishment complete; I began the process of adding one device at a time and checking to see if a Network Map was being generated. What I discovered was when a recent addition to the network, a Western Digital WD TV Live Streaming Media Player, was connected (wirelessly), Windows 7 could no longer generate the Network Map and the failure was consistent. The only way to get the Network Map to work again was to remove power from the WD TV Live, although it remained in the EA4500’s Device List; simply turning it off didn’t help. Since I’d originally witnessed the Windows 7 Network Map working with the Linksys E2000 Router that the EA4500 replaced, I decided to test the WD TV Live with that Router. It worked initially, but it failed consistently after the first success. Interestingly, the failure indication was a little different, but nevertheless generation of the Network Map failed.
I’ve tried changing a few settings on the EA4500 as well as the WD TV Live, but nothing helped. There was a recent firmware update to the WD TV Live, so I might try rolling back the firmware to see if it makes a difference.
The Network Map issue might very well be an issue with the WD TV Live, not the Router, but after reading many threads on this Community I have reservations that the problems I’m experiencing with the Smart interface lockup will be fixed. I suspect new emerging replacement products will be the focus and these older products will be abandoned and no more firmware fixes will be forthcoming and I don’t want to spend more money for a new product just to fix old problems and get something that works properly. The Network Map issue is troublesome, but the lockup of the Router’s “Linksys Smart Wi-Fi” interface is a serious matter to me. It appears that once it locks up, the only way to correct it is a power off restart; not practical if you’re traveling and trying to access settings remotely; the selling point for this feature.
Given the problems I’m experiencing with the EA4500 and AE3000, I guess I’ll return them. Too bad, because otherwise the EA4500 seems like it’s a good Router. I’ve been brand loyal since the Linksys WRT54G came out, but after reading this Community and with my personal experience with the EA4500 and AE3000, now I’ll probably give the NETGEAR N900 equivalents a try.

Credit memo and MAP issue

Hello Guru's
I have 2 issues, and i am unable to understand the system logic for the same
Issue 1:-
We have an Intercomapny scenario
sequence of transaction is as follows
1. Create Return purchase order (document type NB) - Intercompany purchase
2. Post return goods receipts - movement type 161
3. Post credit memo with respect to return purchase order
4. Cancel the movement type 161 - using 161 movement type
System allows me to cancel the document created using 161 movement type
Step 4 should not be allowed but system is allowing me to do so, please advise how to stop this
Issue 2:-
I have a strange MAP issues which is flactuating very drastically
the scenario is as follows
Store stock is 10 ea, stock value is 1000, MAP is 100
DC map is 25
When we make return STO from store to DC, ths stocks are issued at DC MAP (condition type P101)
Assume we issue 9 quantity from Store then
Store stock is 9 ea, stock value is (1000-(25*9)) = 775, MAP is 775/1 = 775
This transaction is causing major flactuation in store MAP (100 changed to 775)
Please advise if there is any way we can control this behaviour
I understand that there is a setting which will in case of major MAP changes will put the amount into PRD account.
Appreciate if you can guide me to help
Regards
Amit

Hi,
For your first scenario,
for a retun po of IC NB type, after creating the PO you need to deliver the same at VL10G. For the delivery system will allow to create the PGR . Prior to these steps you need to return the goods using 161 at MIGO.Please check this 161 stock posted to stock in transit.After PGR system will clear the stock in transit.
Now after claring the stock from transit try cancelling the MIGO 161 document.
For the second query,
Please review your question' When we make return STO from store to DC, ths stocks are issued at DC MAP (condition type P101)
Assume we issue 9 quantity from Store then
Store stock is 9 ea, stock value is (1000-(25*9)) = 775, MAP is 775/1 = 775
This transaction is causing major flactuation in store MAP (100 changed to 775),
Please review the third line.
Regards,

Mapping issue in idoc to JDBC scenario

mapping issue in idoc to JDBC scenario
source structure
E1KNB1M
BUKRS = 1000
E1KNB1M
BUKRS= 9000
E1KNB1M
BUKRS= 2000
THE NODE E1KNB1M is repeated many times and the field BUKRS is also repeated with E1KNB1M as above
TARGET field : ISFRANCHISE
if any where value of BUKRS =9000 we have to pass Y to the target filed, else N
if BUKRS = 9000   THEN ISFRANCHISE= Y
               ELSE
            ISFRANCHISE=N
I've done the mapping as below
BUKRS = 9000--> IF THEN Y ELSE N--
> ISFRANCHISE
BUT everry time the target value is N only
pl suggest
rgds
mojib

mapped like this
BUKRS--->SORT---->
                                             EQUALS --------IF---THEN    Y
9000------------------------>                                               ----------------->ISFRANCHISE
                                                              ELSE   N
context of BUKRS set to parent node
its worked
thanks to all for valuable suggestions
rgds
mojib

Mapping issue - if value matches on of several conditions

Hi champs,
I have a mapping in PI 7.1 of an invoice-xml to a INVOIC02-idoc.
I am mapping the invoice sums to E1EDS01-segments and just want to map five of several qualifiers. So I have set up a mapping for the qualifier field SUMID that just maps those five qualifiers, and map the SUMME-field from inbound message as it is.
Now it shows that our vendors send more than those five qualifiers I have in my mapping. Since I don´t have any control of the SUMME-field all seven values get mapped into the Idoc (generating seven E1EDS01-segments), but only the five segments with my mapped SUMID get the SUMID-field. So I get in total seven E1EDS01 segments in which I get only the SUMME in two of them.
So my question is: Are there any pretty ways to handle this kind of mapping issues besides using a lot of equalS, if and or?
I would like to be able to say (in as simple a function as possible) that if qualifier in field A is X, Y or Z then map the value in field B to SUMME. How do I do that? BTW I am not a java-programmer so advanced java-codes are not a good way for me to handle it.
regards,
Glenn

Write an UDF with this code:
public void <UDFNAME>(String <FieldName>,Container container){
If (<FieldName> == "X" || <FieldName> == "Y" || <FieldName> == "Z"){
return <FieldName>;
Edited by: spantaleoni on Mar 16, 2011 4:04 PM

Mapping issue with context again

I again need help with a mapping issue. I dont know how to handle the contexts to get this working in the xi graphical mapping tool. I have previously logged a question regarding this structure but the requirements have now changed.
I have a source document that has multiple delivery line items and for each delivery line item, there are multiple handling units. Each handling unit contains the line number of the delivery line item it belongs to. This structure has been simplified below.
Source Sample
<DOCUMENT>
<DELIVERY_LINEITEM>
<LINENUMBER>10</LINENUMBER>
<MATERIAL>mat 1</MATERIAL>
</DELIVERY_LINEITEM >
<DELIVERY_LINEITEM >
<LINENUMBER>20</LINENUMBER>
<MATERIAL>mat 2</MATERIAL>
</DELIVERY_LINEITEM >
<HANDLING_UNITS>
<HU_LABEL>123</HU_LABEL>
<HU_ITEM>
<LINENUMBER>10</LINENUMBER>
</HU_ITEM>
</HANDLING_UNITS>
<HANDLING_UNITS>
<HU_LABEL>456</HU_LABEL>
<HU_ITEM>
<LINENUMBER>10</LINENUMBER>
</HU_ITEM>
</HANDLING_UNITS>
<HANDLING_UNITS>
<HU_LABEL>789</HU_LABEL>
<HU_ITEM>
<LINENUMBER>20</LINENUMBER>
</HU_ITEM>
</HANDLING_UNITS>
</DOCUMENT>
Source Structure
DOCUMENT 1..1
DELIVERY_LINEITEM 1..unbounded
LINENUMBER 1..1
MATERIAL 1..1
HANDLING_UNITS 1..unbounded
HU_LABEL 1..1
HU_ITEM 1..1
LINENUMBER 1..1
In the target structure, I need to output each handling unit along with the corresponding DELIVERY_LINEITEM material. Target structure has been simplified below:
Target Sample
<DOCUMENT>
<ROW>
<PACKAGING>
<HU_LABEL>123</HU_LABEL>
</PACKAGING>
<PACKAGING_ITEM>
<LINENUMBER>10</LINENUMBER>
<MATERIAL>mat 1</MATERIAL>
</PACKAGING_ITEM>
</ROW>
<ROW>
<PACKAGING>
<HU_LABEL>456</HU_LABEL>
</PACKAGING>
<PACKAGING_ITEM>
<LINENUMBER>10</LINENUMBER>
<MATERIAL>mat 1</MATERIAL>
</PACKAGING_ITEM>
</ROW>
<ROW>
<PACKAGING>
<HU_LABEL>789</HU_LABEL>
</PACKAGING>
<PACKAGING_ITEM>
<LINENUMBER>20</LINENUMBER>
<MATERIAL>mat 2</MATERIAL>
</PACKAGING_ITEM>
</ROW>
</DOCUMENT>
Target Structure
DOCUMENT 1..1
ROW 1..unbounded
PACKAGING 1...1
HU_LABEL 1..1
PACKAGING_ITEM 1..1
LINENUMBER 1..1
MATERIAL 1..1
Note, 1 ROW in the target structure = 1 HANDLING_UNITS from the source structure.
Can anyone help me to achieve this? I do not know how to map the relevant DELIVERY_LINEITEM\MATERIAL from the source structure to the target structure.

JM,
Please find the solution. Reply back if it helps or not
http://www.flickr.com/photo_zoom.gne?id=1045178998&size=o
http://www.flickr.com/photo_zoom.gne?id=1045179010&size=o
http://www.flickr.com/photo_zoom.gne?id=1045179022&size=o
Results :http://www.flickr.com/photo_zoom.gne?id=1045179134&size=o
Code used:
for(int j=0;j<Handling_Linenum.length;j++)
for(int k=0;k<Delivery_Linenum.length;k++)
if(Handling_Linenum[j].equals(Delivery_Linenum[k]))
result.addValue(""Material[k]"");
result.addContextChange();
Best regards,
raj.

Problem switching from AP-specific to Group-specific VLAN mapping

Hello.
Some days ago, I updated our 5508 WLC to software version 7.5.102.0.
With that version, it should be possible to have a VLAN mapping specific for a Flexconnect group that is set within Flexconnect Group settings.
I did that for all my Flexconnect groups and it works fine with new access point.
For existing access point, which already have an AP-specific VLAN mapping, it is not possible to switch to Group-specific.
When I mark the WLAN in Flexconnect setting of the AP and select "Remove AP specific", I get the error message "Request failed: Vlan is not enabled on this flexconnect".
I wonder what the problem could be, because for newly installed access points, it works fine. Did I miss some settings?
Regards,
Sven Lindeke

Thanks for the fast reply.
Here are the screen shots:
Settings "Flexconnect group"
Settings "Access Point"
Error message

File - XI - Idoc : mapping issue

Hello gurus,
I have a mapping issue:
I have a mapping between FICABillingNotification to FKK_EBS_DOC_TREE
Some fields are mapped one to one, others a mapped to constants.
But for some reason i don't know, not all fields get the right value.
For example:
Working:
Constant 1 --> BEGIN
Constant LS --> RCVPRT (Receiver Partner Type)
Not working:
Constant FILE-->RCVPOR (Receiver Port)
I had an other value the first time i tried it, but now i changed it to FILE but this value is not used by the mapping.
Any help would be welcome
Thanks
Thomas
Edited by: Thomas Pary on May 28, 2008 3:36 PM

This was allready done (sorry i didn't answered that question).
But Ok now i see, that for this RCVPOR the value of the constant "FILE" is mapped, and i can see it in the payload in SXMB_MONI after the mapping. But it isn't populated to the IDoc field :-s
Another problem is, that like the one said above, some of my values are not mapped :
<FICAExternalBilling>
--<DocumentHeader> mapped to EF1KK_EBS_DOC_HEADER
<BillFromId>25001254</BillFromId> mapped to REF_DOC_NUMBER
<PostingDate>20080520</PostingDate> mapped to POST_DATE
<DocumentDate>20080520</DocumentDate> mapped to DOC_DATE
<OriginTypeId>IV</OriginTypeId> mapped to EXT_DOC_TYPE
<ObjectType/>
<ObjectKey/>
<PendingCommitmentGroupID/>
<InvoiceReferenceID/>
<DisputeDocumentReferenceID/>
--</DocumentHeader>
The value of OriginTypeId is not mapped, but the value of DocumentDate and PostingDate are mapped.

Mapping issue: from unbound node to two single fields

Hello,
I have a source message with a node that is 0... unbounded.
The node contains a field named "component_name" with occurence 1..1.
The target message contains only two single fields (component1, component2) and the task is to provide the first two occurences to these fields.
node occ.1
 component <modul beta> -> component1
node occ.2
 component <modul omega> -> component2
We can expect to have any case like these:
node is 0 -> no components provided
node is 1 -> one component provided (usual case) , so second field will be empty
node is 2 -> two components provided
node is > 2 -> need to pick the first two components to provide them to the target fields.
Does anybody here have an idea how to solve this mapping issue?
Your ideas are really welcome!
Best regards
Dirk

Stefan's solution is very good, alternatively, if you are sure that you will always have at least two items you can do
source -> copyValue[0]-> target
source -> copyValue[1]-> target
please note: if you don't have at least two items in your source the copyValue function will throw an exception

VLAN Map issue

Similar Messages

Maybe you are looking for