Vlan mapping missing from flexconnect AP
I am having
issue with flexconnect mode AP. They are losing vlan mapping very frequently. I need to reconfigure the vlan mapping then only client starts getting IP addresses. Please let me know what may be the issue.
AP model: AIR-CAP3602I-N-K9
WLC model: AIR-CT5508-K9
Regards,
Vijayanand
The configuration on the controller must be the same between the time the access point went into standalone mode and the time the access point came back to connected mode. Similarly, if the access point is falling back to a secondary or backup controller, the configuration between the primary and secondary or backup controller must be the same.
You need to configure the Flex connect AP—switch --- controller , for the example to go through proper steps.
http://www.cisco.com/en/US/docs/wireless/controller/7.2/configuration/guide/cg_flexconnect.html#wp1225028
Similar Messages
-
Maps missing from "phone view"
I am using Nokia Suite to update the maps on my Nokia 5800. But when I click on the section which should list maps on the phone, only the voice guidance files show up. I have confirmed that the maps are on my phone (for example I just uploaded the map for Paris and I can find the Eiffel Tower) but neither the existing maps, nor the newly uploaded maps show up in Nokia Suite.
You may try deleting the 'Cities' folder and the 'qf' file from the phone. You may do that by connecting your phone to PC and then thru' Windows Explorer.. Now, disconnect the phone and then Open the Maps application on the phone and after about 15-20 seconds close it. This will recreate the Folder structure. Now connect the phone again to PC and thru' Nokia Suite re-download / re-install the Maps that you want ...
-
5508 WLC on 7.3. For locally switched WLANS, when configuring FlexConnect Vlan Mappings, concerning the native vlan, can this vlan also be used as a vlan mapping for an SSID or not? This would mean that the mgmt IP of the AP's, and this particular SSID would be on the same network.
Yes... If your ap and users are going to be put in the data Vlan, you can just leave the port to an access port and you don't have to setup any native val. Or Vlan mapping in the FlexConnect AP. If you decide you want to map users to the voice Vlan, then you need to trunk it.
If you want to trunk it anyways, then you can map a WLAN to the data Vlan too.
Sent from Cisco Technical Support iPhone App -
FlexConnect VLAN mapping management
How to manage larger amout of FlexConnect APs? Especialy VLAN mapping, which is saved separately in each AP. I would like to have a list of AP-WLAN-VLAN settings. Is there any CLI command (except show run-config) for it? And what about backup of this setting? How to restore it in case of an AP crash?
Many thanks.Yes... If your ap and users are going to be put in the data Vlan, you can just leave the port to an access port and you don't have to setup any native val. Or Vlan mapping in the FlexConnect AP. If you decide you want to map users to the voice Vlan, then you need to trunk it.
If you want to trunk it anyways, then you can map a WLAN to the data Vlan too.
Sent from Cisco Technical Support iPhone App -
Problem switching from AP-specific to Group-specific VLAN mapping
Hello.
Some days ago, I updated our 5508 WLC to software version 7.5.102.0.
With that version, it should be possible to have a VLAN mapping specific for a Flexconnect group that is set within Flexconnect Group settings.
I did that for all my Flexconnect groups and it works fine with new access point.
For existing access point, which already have an AP-specific VLAN mapping, it is not possible to switch to Group-specific.
When I mark the WLAN in Flexconnect setting of the AP and select "Remove AP specific", I get the error message "Request failed: Vlan is not enabled on this flexconnect".
I wonder what the problem could be, because for newly installed access points, it works fine. Did I miss some settings?
Regards,
Sven LindekeThanks for the fast reply.
Here are the screen shots:
Settings "Flexconnect group"
Settings "Access Point"
Error message -
Lost VLAN Mapping on WLC 5508 (Flexconnect)
Hi guys, I have a WLC 5508 and some AIR-LAP1131AG-T-K9 all in flexconnect configuration.
The problem is that 1130 Access Points lost the VLAN Mapping configuration without reason, simple change the vlan mapping to 999 and I need to reconfigure that.
I search in some documents on cisco.com but I can't find anything about this issue.
Could you help me please?
Thanks guys.Hi Scott
Thanks for the answer.
We have around 350 ap's, in 50 different locations (customers). The WLC is running AirOS 7.3.101.0.
Every WLAN is configured to a dummy interface, with the vlanID 2222.
This is the VlanID that the Wlan to vlan mapping got “lost” to.
Unfortunately, I am not able to see the right join time, because the WLC’s was booted. (After the error occurred). Next time I see this, I will look at the join time.
Every location (costumers) has two SSID (guest and employee). The employee network has two vlans (PC’s and BYOD). We are using NPS rules to select witch VLAN the device connectes to.
So in the FlexConnet settings, we do a WLAN to vlan mapping:
GUEST to vlanID
PC’ to vlan ID 5
And in the FlexConnect group we but in the vlan ID for BYOD.
Do you now if the AP stores this to configurations different (flash or RAM)? -
Is your home missing from iPhone maps? Add it!
maps.google.com and the iPhone maps use completely different backend databases. Hence what is in one is not always in the other. If your location is suddenly missing from the iPhone map app (like my home was), then Google says to report it to the map data vendor so they can map it out. maps.google.com is NavTek and mobile google is TeleAtlas. Google swapped out the backend DB about a month back, so a lot of previously-there areas disappeared when this happened.
http://mapfeedback.teleatlas.com
As an aside, the developer for the maps app that I spoke with thought that adding a map feedback form within the iPhone was a good idea, so maybe some future update will streamline this update-requesting interface.
Message was edited by: Drachen DasienI have a gmail account where all my work emails are forwarded when I'm out of the office, so I associated my @work email to @gmail on the Gmail website. Then I setup the @gmail account as IMAP on the iPhone, using the following:
+Name: Name+
+Address: @work address+
+_Incoming Mail Server_+
+Host Name: imap.gmail.com+
+UserName: @gmail address+
+Password: Password+
+_Outgoing Mail Server:_+
+Host Name: smtp.gmail.com+
+UserName: @gmail address+
+Password: Password+
When you send an e-mail it will appear as @work for recipients using web-based servers. The only problem is that if your recipient uses Outlook 2003 or 2007, they will see the from e-mail as "@gmail on behalf of @work". -
Flex Connect Groups - WLAN to VLAN mapping
I have a question about configuring WLAN to VLAN mapping on FlexConnect Groups.
Do the mappings that are configured in the FC Group get inherited by the APs when they are placed in the group?
It seems like they do not.
I am playing around in a lab with a virtual WLC running 7.5 and an old 1131 AP.
If I configure the WLAN to VLAN mapping on the individual AP, it works as expected.
If I configure the WLAN to VLAN mapping within the FC group and add the AP to the group, it does not.
The AP does not inherit the settings from the Group.
I am wondering how you would deploy a lot of APs without having to configure each AP individually.
ThanksYes, you are correct. It is not like normal AP groups where it will map WLAN to AP belong to that AP group.
Anyway since you have to convert each AP manually to FlexConnect mode, you should do the WLAN mapping at that point as additional step.
FlexConnect Group is mainly to give fast roaming feature for FC APs in brach deployment solution (typically not so many APs). Also keep in mind you can have maximum 25 APs in FlexConnect AP group for WiSM2 or 5508 & you can go upto 100 in 7500 WLC. (see table 7.3 in below link)
http://www.cisco.com/en/US/docs/solutions/Enterprise/Mobility/emob73dg/ch7_HREA.html#wp1108090
HTH
Rasika
**** Pls rate all useful responses ***** -
Vlan mapping lost when fail to secondary WLC
Hello
I have two WLCs,The primary WLC mode 5508 ,running code is 7.4.100.60, The secondary WLC mode 4402,running code is 7.0.230.0.
When ap working on 5508 wlc,it use flexconnect mode, when ap working on 4402, it will h-reap mode
ap mode:1242、1142.
question:
When ap fail to secondary WLC(4402),some ap will lost their vlan mapping information.not all of ap. during fail over, ap will doanloading firmware.
is there any way to solve? thanks!I understand. Two controllers, two different code levels. 4400 is locked in at 7.0 code and you need 7.4 for the 2600 ap.
In your orginal post you state when aps fail over from one controller to the other you lose vlans and aps code upgrade/down grade. This is not a support deisgn. You cant properly failover betwen different code versions.
If you want them to stop failing over and clients dont roam from aps on controler to 1 to aps on controller 2, simple remove the controllers from the shared mobility group and put the controllers in their own group.
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
"I'm in a serious relationship with my Wi-Fi. You could say we have a connection." -
Hi
Im configuring a WLC 5508 ( version 7 ) with h-reap local switching.
All is working , yet i wonder if the vlan mapping can be done better.
Currently i need to go into each Lightweight Access point , enable h-reap, then set the native vlan , with the final step to map the vlan. This needs to be done for each AP. In an environment of 100's of APs i would take foreever. ( i thought one of the main points of the WLC is centralized management )
Am i missing something ? Is there an easier way to do this ?
Cheers, Pankajyou should be able to set the VLAN mappings from WCS/NCS as well.
as well in 7.2 you can now do dynamic vlan assignment, though you still need to list the VLAN the HREAP can access
http://www.cisco.com/en/US/docs/wireless/controller/7.2/configuration/guide/cg_flexconnect.html#wp1247954
Steve -
I have an issue with a VLAN map I am attempting to use to filter traffic. It is a flat Layer 2 LAN so all hosts are in VLAN 1. I have a number of test machines that I want to deny access to live database servers. To do this I tried the following:
ip access-list extended testboxes
permit ip host x.x.x.x host x.x.x.x
vlan access-map denytest 10
match ip address testboxes
action drop
vlan filter denytest vlan-list 1
Once I apply the VLAN map I lose all connectivity to the switch. Is there something I am missing here?
Thanks
IanUnlike regular IOS standard or extended ACLs that are configured on router interfaces only and are applied on routed packets only, VACLs apply to all packets and can be applied to any VLAN. If a VACL is configured for a certain traffic and that traffic does not match the VACL, the default action is deny. Additionally, VACLs have an implicit deny at the end of the map; a packet is denied if it does not match any ACL entry, and at least one ACL is configured for the packet type. Add an additional permit statement allowing telnet/ssh/or web traffic to the switch:
permit tcp host X.X.X.X host X.X.X.X eq telnet
Best Regards
Francisco -
Nokia Suite 3.6 clears pre installed map data from...
I had a problem with Nokia Suite clearing pre-installed maps from my new Pureview 808 and E5-00. The first time I let Nokia Suite 3.6 check for outdated maps, it reported that over 700MB worth of maps needed updating.
I didn't think much of the time taken but after maybe 5 minutes connection was lost and so were the preinstalled maps. Nokia Care didn't help as they said it was a PC or internet problem.
I also noticed in Nokia Suite 3.6 that the country Thaliand is missing from my installation of the suite for Pureview 808. However the country is there inside my phone's map loader. Thailand is present inside Nokia Suite when I connect my E5 to Nokia Suite 3.6.
Can anyone tell me what the pre installed maps in the phones are?@wkl12mr
It depends upon the product code of the device as to which maps are pre-installed upon Mass memory of 808 as this determines localisation.
Presumably your 808 is running Nokia Maps v3.09_12wk09_b05 and if you use "Maploader" from within Nokia Maps application is not Thailand listed as per screenshot?
Happy to have helped forum with a Support Ratio = 42.5 -
[SOLVED] - Package xf86-video-via is missing from repositories!
Hi,
I have a VIA card as follows:
VGA Compatible Controller: VIA Technologies, Inc. S3 Unichrome Pro VGA Adapter (rev 01)
My X doesn't work except in VESA mode. But in Vesa mode, when I play videos in mplayer, I can't fullscreen them.
When I checked the sample xorg.conf files mentioned in the Xorg wiki, I find that I am advised to use the xf86-video-via package.
But the package xf86-video-via is missing from repositories!
pacman -Ss xf86-video-via doesn't give results!
Please help.
Thanks.
Last edited by msadiq (2008-12-27 04:18:45)Sorry for the long wait, I havent got the time to test but I did uncomment the RenderAccel and that didnt do anything.
my Xorg.0.log:
=================================================================
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-ARCH i686
Current Operating System: Linux hp-2133 2.6.28-ARCH #1 SMP PREEMPT Sun Jan 25 10:13:11 UTC 2009 i686
Build Date: 17 December 2008 08:20:05PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 27 21:07:16 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "HP LCD"
(**) | |-->Device "Via Chrome9"
(**) |-->Input Device "HP Keyboard"
(**) |-->Input Device "HP Touchpad"
(**) Option "AutoAddDevices" "false"
(**) Not automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified. Using compiled-in default.
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81d5fe0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0@1:0:0) VIA Technologies, Inc. CN896/VN896/P4M900 [Chrome 9 HC] rev 1, Mem @ 0xc0000000/0, 0xfc000000/0, BIOS @ 0x????????/65536
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[32] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[33] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[34] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[35] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[36] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[37] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[38] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[39] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[42] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[43] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[44] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[45] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[46] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[47] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[48] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[49] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[50] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[51] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[52] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[53] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "xtt"
(WW) Warning, couldn't open module xtt
(II) UnloadModule: "xtt"
(EE) Failed to load module "xtt" (module does not exist, 0)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(WW) Warning, couldn't open module record
(II) UnloadModule: "record"
(EE) Failed to load module "record" (module does not exist, 0)
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DEC-XTRAP
(II) LoadModule: "type1"
(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) LoadModule: "openchrome"
(II) Loading /usr/lib/xorg/modules/drivers//openchrome_drv.so
(II) Module openchrome: vendor="http://openchrome.org/"
compiled for 1.5.3, module version = 0.2.903
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 4.1
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) OPENCHROME: Driver for VIA Chrome chipsets: CLE266, KM400/KN400,
K8M800/K8N800, PM800/PM880/CN400, P4M800Pro/VN800/CN700,
K8M890/K8N890, P4M900/VN896/CN896, CX700/VX700, P4M890, VX800
(II) Primary Device is: PCI 01@00:00:0
(!!) VIA Technologies does not support this driver in any way.
(!!) For support, please refer to http://www.openchrome.org/.
(!!) (development build, at svn revision 726)
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[32] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[33] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[34] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[35] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[36] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[37] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[38] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[39] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[42] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[43] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[44] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[45] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[46] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[47] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[48] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[49] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[50] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[51] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[52] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[53] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) CHROME(0): VIAPreInit
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 0.1.0
ABI class: X.Org Video Driver, version 4.1
(II) CHROME(0): VIAGetRec
(**) CHROME(0): Depth 24, (--) framebuffer bpp 32
(==) CHROME(0): RGB weight 888
(==) CHROME(0): Default visual is TrueColor
(--) CHROME(0): Chipset: P4M900/VN896/CN896
(--) CHROME(0): Chipset revision: 0
(--) CHROME(0): Probed amount of VideoRAM = 262144 kB
(II) CHROME(0): Setting up default chipset options.
(II) CHROME(0): VIASetupDefaultOptions
(II) CHROME(0): Reading config file...
(**) CHROME(0): Option "AccelMethod" "XAA"
(**) CHROME(0): Option "PanelSize" "1024x600"
(**) CHROME(0): Option "EnableAGPDMA" "False"
(II) CHROME(0): Starting to parse config file options...
(==) CHROME(0): Shadow framebuffer is disabled.
(==) CHROME(0): Hardware acceleration is enabled.
(**) CHROME(0): Using XAA acceleration architecture.
(==) CHROME(0): Using hardware two-color cursors and software full-color cursors.
(==) CHROME(0): GPU virtual command queue will be enabled.
(==) CHROME(0): DRI IRQ will be enabled if DRI is enabled.
(**) CHROME(0): AGP DMA will be disabled if DRI is enabled.
(==) CHROME(0): PCI DMA will not be used for XV image transfer if DRI is enabled.
(==) CHROME(0): Will not enable VBE modes.
(==) CHROME(0): VBE VGA register save & restore will not be used
if VBE modes are enabled.
(==) CHROME(0): Xv Bandwidth check is enabled.
(==) CHROME(0): Will not impose a limit on video RAM reserved for DRI.
(==) CHROME(0): Will try to allocate 32768 kB of AGP memory.
(==) CHROME(0): Digital output bus width is 12 bits.
(==) CHROME(0): DVI Center is disabled.
(II) CHROME(0): ViaPanelGetNativeModeFromOption
(**) CHROME(0): Panel mode index is 13
(**) CHROME(0): Selected Panel Size is 1024x600
(==) CHROME(0): Panel will not be forced.
(==) CHROME(0): TV dotCrawl is disabled.
(==) CHROME(0): TV deflicker is set to 0.
(==) CHROME(0): No default TV type is set.
(==) CHROME(0): No default TV output signal type is set.
(II) CHROME(0): VIAMapMMIO
(--) CHROME(0): mapping MMIO @ 0xfc000000 with size 0x9000
(--) CHROME(0): mapping BitBlt MMIO @ 0xfc200000 with size 0x200000
(II) CHROME(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) CHROME(0): Will not print VGA registers.
(==) CHROME(0): Will not scan I2C buses.
(II) CHROME(0): ...Finished parsing config file options.
(--) CHROME(0): Detected Hewlett Packard 2133 Mini-Note.
(II) CHROME(0): Detected MemClk 8
(II) CHROME(0): ViaGetMemoryBandwidth
(II) CHROME(0): Detected TV standard: PAL.
(==) CHROME(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) CHROME(0): ViaI2CInit
(II) CHROME(0): ViaI2CBus1Init
(II) CHROME(0): I2C bus "I2C bus 1" initialized.
(II) CHROME(0): ViaI2cBus2Init
(II) CHROME(0): I2C bus "I2C bus 2" initialized.
(II) CHROME(0): ViaI2CBus3Init
(II) CHROME(0): I2C bus "I2C bus 3" initialized.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) CHROME(0): I2C device "I2C bus 1:ddc2" registered at address 0xA0.
(II) CHROME(0): I2C device "I2C bus 1:ddc2" removed.
(II) CHROME(0): ViaOutputsDetect
(II) CHROME(0): Enabling panel from PCI-subsystem ID information.
(II) CHROME(0): Will not try to detect TV encoder.
(II) CHROME(0): ViaOutputsSelect
(II) CHROME(0): ViaOutputsSelect: X Configuration: 0x00
(II) CHROME(0): ViaOutputsSelect: BIOS Initialised register: 0x07
(II) CHROME(0): ViaOutputsSelect: Panel.
(II) CHROME(0): ViaPanelPreInit
(II) CHROME(0): ViaPanelGetNativeDisplayMode
(II) CHROME(0): NativeModeIndex: 13
(II) CHROME(0): ViaModesAttach
(II) CHROME(0): ViaModesMonitorFixup - Adjusted HSync.lo to 29.677456
(II) CHROME(0): ViaModesMonitorFixup - Adjusted HSync.hi to 74.904167
(II) CHROME(0): HP LCD: Using hsync range of 29.68-74.90 kHz
(II) CHROME(0): HP LCD: Using vrefresh range of 55.00-90.00 Hz
(II) CHROME(0): Clock range: 20.00 to 230.00 MHz
(II) CHROME(0): ViaValidMode: Validating 640x350 (31500)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 640x400 (31500)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 720x400 (35500)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 640x480 (25175)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 640x480 (31500)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 640x480 (31500)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 640x480 (36000)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 800x600 (36000)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 800x600 (40000)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 800x600 (50000)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 800x600 (49500)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 800x600 (56300)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1024x768 (44900)
(II) CHROME(0): Not using default mode "1024x768" (interlace mode not supported)
(II) CHROME(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1024x768 (65000)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1024x768 (75000)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1024x768 (78750)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1024x768 (94500)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1152x864 (108000)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1280x960 (108000)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1280x960 (148500)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1280x1024 (108000)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1280x1024 (135000)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1280x1024 (157500)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1600x1200 (162000)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1600x1200 (175500)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1600x1200 (189000)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1600x1200 (202500)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1600x1200 (229500)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1792x1344 (204800)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) CHROME(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) CHROME(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1856x1392 (218300)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) CHROME(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) CHROME(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) CHROME(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) CHROME(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) CHROME(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) CHROME(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 832x624 (57284)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "832x624" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1152x864 (81620)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1152x864 (96770)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1152x864 (104990)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1152x864 (119650)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1152x864 (121500)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1152x864 (143470)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1360x768 (72000)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1360x768" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "680x384" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1360x768 (84750)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1360x768" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "680x384" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1400x1050 (122000)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1400x1050 (145060)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1400x1050 (155800)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1400x1050 (179260)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1440x900 (106500)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1440x900" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "720x450" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1600x1024 (103125)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1600x1024" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1680x1050 (119000)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1680x1050 (146250)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1680x1050 (174000)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1680x1050 (187000)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1680x1050 (214750)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1920x1080 (138500)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1920x1080" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "960x540" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 1920x1200 (154000)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1920x1200" (exceeds panel dimensions)
(II) CHROME(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(II) CHROME(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) CHROME(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) CHROME(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) CHROME(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) CHROME(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) CHROME(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) CHROME(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) CHROME(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) CHROME(0): ViaValidMode: Validating 640x480 (25312)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 720x480 (26591)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 720x576 (32663)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 800x480 (40000)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 800x600 (39822)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 848x480 (33750)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 856x480 (31704)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 1024x512 (41164)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 1024x576 (46981)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 1024x600 (48960)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 1024x768 (65028)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) CHROME(0): ViaValidMode: Validating 1152x864 (81613)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) CHROME(0): ViaValidMode: Validating 1280x768 (81135)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1280x768" (exceeds panel dimensions)
(II) CHROME(0): ViaValidMode: Validating 1280x720 (74600)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1280x720" (exceeds panel dimensions)
(II) CHROME(0): ViaValidMode: Validating 1280x960 (108280)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) CHROME(0): ViaValidMode: Validating 1280x1024 (108280)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) CHROME(0): ViaValidMode: Validating 1360x768 (85500)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1360x768" (exceeds panel dimensions)
(II) CHROME(0): ViaValidMode: Validating 1366x768 (85860)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1366x768" (exceeds panel dimensions)
(II) CHROME(0): ViaValidMode: Validating 1400x1050 (122726)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) CHROME(0): ViaValidMode: Validating 1440x900 (106470)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1440x900" (exceeds panel dimensions)
(II) CHROME(0): ViaValidMode: Validating 1600x1200 (161793)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) CHROME(0): ViaValidMode: Validating 1920x1080 (172900)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): Not using default mode "1920x1080" (exceeds panel dimensions)
(II) CHROME(0): ViaValidMode: Validating 1024x600 (48960)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 1024x576 (46981)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 1024x512 (41164)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 800x600 (56300)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 800x600 (49500)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 800x600 (50000)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 800x600 (40000)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 800x600 (39822)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 800x600 (36000)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 720x576 (32663)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 856x480 (31704)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 848x480 (33750)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 800x480 (40000)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 720x480 (26591)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 640x480 (36000)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 640x480 (31500)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 640x480 (31500)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 640x480 (25312)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 640x480 (25175)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 720x400 (35500)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 640x400 (31500)
(II) CHROME(0): ViaSecondCRTCModeValid
(II) CHROME(0): ViaValidMode: Validating 640x350 (31500)
(II) CHROME(0): ViaSecondCRTCModeValid
(--) CHROME(0): Virtual size is 1024x600 (pitch 1024)
(**) CHROME(0): *Default mode "1024x600": 49.0 MHz (scaled from 0.0 MHz), 37.3 kHz, 60.0 Hz
(II) CHROME(0): Modeline "1024x600"x60.0 48.96 1024 1064 1168 1312 600 601 604 622 -hsync +vsync (37.3 kHz)
(**) CHROME(0): Default mode "1024x576": 47.0 MHz (scaled from -0.0 MHz), 35.8 kHz, 60.0 Hz
(II) CHROME(0): Modeline "1024x576"x60.0 46.98 1024 1064 1168 1312 576 576 579 597 -hsync +vsync (35.8 kHz)
(**) CHROME(0): Default mode "1024x512": 41.2 MHz (scaled from 0.0 MHz), 31.8 kHz, 59.8 Hz
(II) CHROME(0): Modeline "1024x512"x59.8 41.16 1024 1056 1160 1296 512 512 515 531 -hsync +vsync (31.8 kHz)
(**) CHROME(0): Default mode "800x600": 56.3 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.1 Hz
(II) CHROME(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(**) CHROME(0): Default mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) CHROME(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(**) CHROME(0): Default mode "800x600": 50.0 MHz (scaled from -0.0 MHz), 48.1 kHz, 72.2 Hz
(II) CHROME(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(**) CHROME(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
(II) CHROME(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(**) CHROME(0): Default mode "800x600": 39.8 MHz (scaled from -0.0 MHz), 37.7 kHz, 60.0 Hz
(II) CHROME(0): Modeline "800x600"x60.0 39.82 800 840 968 1056 600 600 604 628 +hsync +vsync (37.7 kHz)
(**) CHROME(0): Default mode "800x600": 36.0 MHz (scaled from -0.0 MHz), 35.2 kHz, 56.2 Hz
(II) CHROME(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(**) CHROME(0): Default mode "720x576": 32.7 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
(II) CHROME(0): Modeline "720x576"x60.0 32.66 720 744 816 912 576 576 579 597 -hsync +vsync (35.8 kHz)
(**) CHROME(0): Default mode "856x480": 31.7 MHz (scaled from -0.0 MHz), 29.8 kHz, 60.0 Hz
(II) CHROME(0): Modeline "856x480"x60.0 31.70 856 872 960 1064 480 480 483 497 -hsync +vsync (29.8 kHz)
(**) CHROME(0): Default mode "848x480": 33.8 MHz (scaled from 0.0 MHz), 31.0 kHz, 60.0 Hz
(II) CHROME(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 485 493 517 +hsync +vsync (31.0 kHz)
(**) CHROME(0): Default mode "800x480": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
(II) CHROME(0): Modeline "800x480"x60.3 40.00 800 832 960 1056 480 541 545 628 -hsync +vsync (37.9 kHz)
(**) CHROME(0): Default mode "720x480": 26.6 MHz (scaled from -0.0 MHz), 29.7 kHz, 59.7 Hz
(II) CHROME(0): Modeline "720x480"x59.7 26.59 720 736 808 896 480 480 483 497 -hsync +vsync (29.7 kHz)
(**) CHROME(0): Default mode "640x480": 36.0 MHz (scaled from -0.0 MHz), 43.3 kHz, 85.0 Hz
(II) CHROME(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(**) CHROME(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) CHROME(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(**) CHROME(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
(II) CHROME(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(**) CHROME(0): Default mode "640x480": 25.3 MHz (scaled from -0.0 MHz), 31.6 kHz, 60.3 Hz
(II) CHROME(0): Modeline "640x480"x60.3 25.31 640 656 752 800 480 489 491 525 -hsync -vsync (31.6 kHz)
(**) CHROME(0): Default mode "640x480": 25.2 MHz (scaled from -0.0 MHz), 31.5 kHz, 59.9 Hz
(II) CHROME(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(**) CHROME(0): Default mode "720x400": 35.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 85.0 Hz
(II) CHROME(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz)
(**) CHROME(0): Default mode "640x400": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 85.1 Hz
(II) CHROME(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz)
(**) CHROME(0): Default mode "640x350": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 85.1 Hz
(II) CHROME(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz)
(==) CHROME(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.2.1
ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) CHROME(0): VIAUnmapMem
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[25] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[26] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[27] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[28] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[29] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[30] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[31] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[32] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[33] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[34] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[35] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[36] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[37] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[38] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[39] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[40] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[41] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[42] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[43] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[44] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[45] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[46] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[47] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[48] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[49] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[50] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[51] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[52] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[53] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) CHROME(0): VIAScreenInit
(II) CHROME(0): VIAMapFB
(--) CHROME(0): mapping framebuffer @ 0xc0000000 with size 0x10000000
(--) CHROME(0): Frame buffer start: 0xa7771000, free start: 0x258000 end: 0x10000000
(II) CHROME(0): VIAMapMMIO
(--) CHROME(0): mapping MMIO @ 0xfc000000 with size 0x9000
(--) CHROME(0): mapping BitBlt MMIO @ 0xfc200000 with size 0x200000
(II) CHROME(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) CHROME(0): VIASave
(II) CHROME(0): Primary
(II) CHROME(0): Crtc...
(II) CHROME(0): TVSave...
(II) CHROME(0): VIAWriteMode
(II) CHROME(0): ViaModeSet
(II) CHROME(0): Name: 1024x600
(II) CHROME(0): Clock: 48960
(II) CHROME(0): VRefresh: 59.995293
(II) CHROME(0): HSync: 37.317074
(II) CHROME(0): HDisplay: 1024
(II) CHROME(0): HSyncStart: 1064
(II) CHROME(0): HSyncEnd: 1168
(II) CHROME(0): HTotal: 1312
(II) CHROME(0): HSkew: 0
(II) CHROME(0): VDisplay: 600
(II) CHROME(0): VSyncStart: 601
(II) CHROME(0): VSyncEnd: 604
(II) CHROME(0): VTotal: 622
(II) CHROME(0): VScan: 0
(II) CHROME(0): Flags: 6
(II) CHROME(0): CrtcHDisplay: 0x400
(II) CHROME(0): CrtcHBlankStart: 0x400
(II) CHROME(0): CrtcHSyncStart: 0x428
(II) CHROME(0): CrtcHSyncEnd: 0x490
(II) CHROME(0): CrtcHBlankEnd: 0x520
(II) CHROME(0): CrtcHTotal: 0x520
(II) CHROME(0): CrtcHSkew: 0x0
(II) CHROME(0): CrtcVDisplay: 0x258
(II) CHROME(0): CrtcVBlankStart: 0x258
(II) CHROME(0): CrtcVSyncStart: 0x259
(II) CHROME(0): CrtcVSyncEnd: 0x25c
(II) CHROME(0): CrtcVBlankEnd: 0x26e
(II) CHROME(0): CrtcVTotal: 0x26e
(II) CHROME(0): ViaModeSecondCRTC
(II) CHROME(0): ViaPanelScale: 1024,600 -> 1024,600
(II) CHROME(0): mode: 0x8808110
(II) CHROME(0): mode->name: 0x880a770
(II) CHROME(0): mode->name: 1024x600
(II) CHROME(0): ViaSecondCRTCSetMode
(II) CHROME(0): Setting up 1024x600
(II) CHROME(0): ViaSetSecondaryFIFO
(II) CHROME(0): ViaSetSecondaryDotclock to 0x508c01
(II) CHROME(0): ViaSetUseExternalClock
(II) CHROME(0): ViaSecondDisplayChannelEnable
(II) CHROME(0): ViaDisplayDisableCRT
(II) CHROME(0): ViaDisplayDisableSimultaneous
(II) CHROME(0): VIAAdjustFrame
(II) CHROME(0): VIAAdjustFrame
(II) CHROME(0): - Blanked
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
(EE) [drm] drmOpen failed.
(EE) CHROME(0): [dri] DRIScreenInit failed. Disabling DRI.
(II) CHROME(0): - Visuals set up
(II) CHROME(0): VIAInternalScreenInit
(II) CHROME(0): - B & W
(II) CHROME(0): CursorStart: 0xffc0000
(II) CHROME(0): Using 1800 lines for offscreen memory.
(II) CHROME(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
8x8 color pattern filled rectangles
Solid Lines
Dashed Lines
Image Writes
Setting up tile and stipple cache:
32 128x128 slots
20 256x256 slots
32 8x8 color pattern slots
(==) CHROME(0): Backing store disabled
(II) CHROME(0): - Backing store set up
(II) CHROME(0): - SW cursor set up
(II) CHROME(0): VIAHWCursorInit
(II) CHROME(0): - Def Color map set up
(II) CHROME(0): VIALoadPalette
(II) CHROME(0): VIALoadRgbLut
(II) CHROME(0): - Palette loaded
(II) CHROME(0): DPMS enabled
(II) CHROME(0): - DPMS set up
(II) CHROME(0): - Color maps etc. set up
(II) CHROME(0): direct rendering disabled
(II) CHROME(0): Benchmarking video copy. Less time is better.
(--) CHROME(0): Timed libc YUV420 copy... 1813105. Throughput: 522.2 MiB/s.
(--) CHROME(0): Timed kernel YUV420 copy... 1789621. Throughput: 529.1 MiB/s.
(--) CHROME(0): Timed SSE YUV420 copy... 960929. Throughput: 985.3 MiB/s.
(--) CHROME(0): Timed MMX YUV420 copy... 1706519. Throughput: 554.8 MiB/s.
(--) CHROME(0): Ditching 3DNow! YUV420 copy. Not supported by CPU.
(--) CHROME(0): Timed MMX2 YUV420 copy... 1029823. Throughput: 919.4 MiB/s.
Freed 9834496 (pool 1)
(--) CHROME(0): Using SSE YUV42X copy for video.
(WW) CHROME(0): [XvMC] XvMC is not supported on this chipset.
(WW) CHROME(0): Option "RenderAccel" is not used
(II) CHROME(0): - Done
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(**) Option "CoreKeyboard"
(**) HP Keyboard: always reports core events
(**) Option "Protocol" "standard"
(**) HP Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) HP Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) HP Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "se"
(**) HP Keyboard: XkbLayout: "se"
(**) Option "CustomKeycodes" "off"
(**) HP Keyboard: CustomKeycodes disabled
(**) Option "Protocol" "Auto"
(**) Option "Device" "/dev/input/mice"
(II) HP Touchpad: Setting mouse protocol to "ExplorerPS/2"
(**) HP Touchpad: Device: "/dev/input/mice"
(**) HP Touchpad: Protocol: "Auto"
(**) Option "CorePointer"
(**) HP Touchpad: always reports core events
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons"
(**) HP Touchpad: Emulate3Buttons, Emulate3Timeout: 50
(**) HP Touchpad: ZAxisMapping: buttons 4 and 5
(**) HP Touchpad: Buttons: 9
(**) HP Touchpad: Sensitivity: 1
(II) evaluating device (HP Keyboard)
(II) XINPUT: Adding extended input device "HP Keyboard" (type: KEYBOARD)
(II) evaluating device (HP Touchpad)
(II) XINPUT: Adding extended input device "HP Touchpad" (type: MOUSE)
(II) HP Touchpad: Setting mouse protocol to "ExplorerPS/2"
(II) HP Touchpad: ps2EnableDataReporting: succeeded
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(EE) config/hal: NewInputDeviceRequest failed
(II) config/hal: Adding input device Video Bus
(EE) config/hal: NewInputDeviceRequest failed
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(EE) config/hal: NewInputDeviceRequest failed
(II) config/hal: Adding input device Macintosh mouse button emulation
(EE) config/hal: NewInputDeviceRequest failed
===============================================================
And my glxinfo:
===============================================================
name of display: :0.0
display: :0 screen: 0
direct rendering: No (If you want to find out why, try setting LIBGL_DEBUG=verbose)
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_OML_swap_method,
GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_hyperpipe,
GLX_SGIX_swap_barrier, GLX_SGIX_fbconfig, GLX_MESA_copy_sub_buffer
client glx vendor string: S3G
client glx version string: 1.4
client glx extensions:
GLX_SGI_make_current_read, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_ARB_get_proc_address, GLX_EXT_texture_from_pixmap,
GLX_MESA_copy_sub_buffer
GLX version: 1.2
GLX extensions:
GLX_SGI_make_current_read, GLX_SGIX_fbconfig, GLX_EXT_texture_from_pixmap,
GLX_MESA_copy_sub_buffer
OpenGL vendor string: Mesa Project
OpenGL renderer string: Software Rasterizer
OpenGL version string: 1.4 (2.1 Mesa 7.2)
OpenGL extensions:
GL_EXT_texture_env_add, GL_ARB_multitexture, GL_ARB_transpose_matrix,
GL_ARB_texture_env_add, GL_ARB_texture_cube_map,
GL_ARB_texture_compression, GL_ARB_texture_border_clamp,
GL_ARB_point_parameters, GL_ARB_texture_env_combine,
GL_ARB_texture_env_crossbar, GL_ARB_texture_env_dot3,
GL_ARB_texture_mirrored_repeat, GL_ARB_depth_texture, GL_ARB_shadow,
GL_ARB_shadow_ambient, GL_ARB_window_pos, GL_ARB_occlusion_query,
GL_ARB_texture_non_power_of_two, GL_ARB_point_sprite,
GL_EXT_texture_rectangle, GL_EXT_abgr, GL_EXT_blend_color,
GL_EXT_texture3D, GL_EXT_packed_pixels, GL_SGIS_texture_lod,
GL_EXT_rescale_normal, GL_EXT_vertex_array, GL_SGIS_generate_mipmap,
GL_SGIS_texture_edge_clamp, GL_SGIS_texture_border_clamp,
GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_point_parameters,
GL_EXT_draw_range_elements, GL_EXT_bgra, GL_EXT_separate_specular_color,
GL_EXT_secondary_color, GL_EXT_multi_draw_arrays, GL_EXT_fog_coord,
GL_EXT_texture_env_combine, GL_EXT_blend_func_separate,
GL_EXT_stencil_wrap, GL_NV_texgen_reflection, GL_EXT_texture_lod_bias,
GL_NV_blend_square, GL_NV_texture_rectangle, GL_EXT_shadow_funcs,
GL_ATI_texture_env_combine3, GL_SGI_color_matrix,
GL_EXT_texture_edge_clamp
2 GLX Visuals
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
0x21 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x3b 32 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
32 GLXFBConfigs:
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
0x3c 0 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x3d 0 tc 0 32 0 r . . 8 8 8 8 0 0 0 16 16 16 16 0 0 Slow
0x3e 0 tc 0 32 0 r y . 8 8 8 8 0 0 0 -
Error mapping, OGG from SQL 2008 to Oracle 11g
Hi Experts
Please I hoppe you can help me, I am using OGG to replicate from SQL 2008 to Oracle 11g R2, I can insert rows and replicate without problems, but when I update or delete on the Source the replicat stop working.
This is the mesage:
2012-06-11 09:51:57 ERROR OGG-01296 Oracle GoldenGate Delivery for Oracle, msrep.prm: Error mapping from FACTURA.EMP to GOLDENGATE.EMP.
2012-06-11 09:51:57 ERROR OGG-01668 Oracle GoldenGate Delivery for Oracle, msrep.prm: PROCESS ABENDING.
--- Discard FIle
Key column FIRST_NAME (1) is missing from delete on table GOLDENGATE.EMP
Key column LAST_NAME (2) is missing from delete on table GOLDENGATE.EMP
Missing 2 key columns in delete for table GOLDENGATE.EMP.
Current time: 2012-06-11 09:51:57
Discarded record from action ABEND on error 0
Aborting transaction on /u01/app/goldenGate/dirdat/ms beginning at seqno 0 rba 13729
error at seqno 0 rba 13729
Problem replicating FACTURA.EMP to GOLDENGATE.EMP
Mapping problem with delete record (target format)...
ID = 121
Process Abending : 2012-06-11 09:51:57
------ SOURCE TABLE
create table [factura].[emp] (
[id] [smallint] not null,
[first_name] varchar(50) not null,
[last_name] varchar(50) not null,
constraint [emp_pk] primary key clustered (
[id] asc
) with (pad_index = off, statistics_norecompute=off, ignore_dup_key=off, allow_row_locks=on, allow_page_locks=on) on [primary]
) on [primary]
------ TARGET TABLE
CREATE TABLE GOLDENGATE.EMP
ID NUMBER,
FIRST_NAME VARCHAR2(50 BYTE),
LAST_NAME VARCHAR2(50 BYTE)
Thank you
J.A.Hi
I altered the table in Oracle, I add the primary key:
alter table emp add constraint
pk_emp primary key (ID );
Now GG replicate insert, delete and update.
J.A. -
Authenticated Users & Users missing from Root
Hello,
Environment: MDT 2013, 2008 R2, Windows 7 x86. MDT is located on Windows 7 x86 and is not integrated with SCCM or WDS.
Process: Separate build, capture, and deployment task sequences.
Problem: After deployment the Authenticated Users and local Users are missing from the root (e.g., c:). The only security permissions assigned to the root are SYSTEM, domain account, Local Administrator.
This causes problems once joined to a domain due to the fact Authenticated Users have no permissions forcing a given user to have a temporary account. So far, only a partial workaround is identified and is undesirable in the long-run. The workaround
is to manually add Authenticated Users as well as the Local Users to the root and delete the domain account but the system will only allow partial inheritance through the file structure. Delete all entries for a particular user in the registry (e.g.,
PolicyGUID, ProfileGUID, ProfileList). Afterwards, log in to the machine with an account within the domain administrator group.
Additional information shows the registry Profilelist entries for a user maintains partial access with a value of 204; this includes the user and a domain account within the administrator group. The domain account present after deployment has a value
of 0. Two accounts have the expected value of 256 and they are the local and domain administrator account.
Also, if the same image is deployed using the PE environment the accounts are as they should be. The groups added are: Authenticated Users, Localmachine\Users, SYSTEM, Localmachine\Administrators.
The questions are: why would the Authenticated Users and Local Users accounts be missing? Why is the account used to deploy added?
Help is very appreciated, and thank you.Hello, Nicholas the sysprep and capture is completed by a default template from MDT LTI sequence. The answer file used is the default provided by MDT. No attempt is made to capture from winpe because this simply negates the point of the MDT process.
However, applying the same image from winpe there are no permission issues and all the appropriate groups are assigned to the root.
With returning to the office this fine morning, I ran icacls on a machine:
C:\Users\Administrator>icacls c:\
c:\ No mapping between account names and security IDs was done.
(I)(OI)(CI)(F)
BUILTIN\Administrators:(I)(OI)(CI)(F)
NT AUTHORITY\SYSTEM:(I)(OI)(CI)(F)
Mandatory Label\High Mandatory Level:(OI)(NP)(IO)(NW)
Successfully processed 1 files; Failed processing 0 files
Thank you for the continued effort, Nicholas. With the additional icacls information I will delve into the general error provided.
Maybe you are looking for
-
I can not open the file in Photoshop...
I can not open the file in Photoshop after formattatto pc. I get the following error "could not complete your request because there is an error in the program Please me! Thank you
-
I tried updating to iso 8.0.2 and now my iPad is stuck in recovery mode and will not do anything. it will not reset.
-
Downloaded book, but getting error message
I have downloaded a book to my iTunes, but when I try to sync my iPod I get this error message... Some of the items in the iTunes library, including "The Alienist (Unabridged) part 10 of 10," were not copied to the iPod, "Misty's iPod," because you a
-
Lord 2 api order entry integration
We are using CRM 7.01 and ECC 6.0 We are integrating the lord api based order entry within a web ic. I have a question whether partner selection (ship to and payer) via pop up is supported as standard through the web ic. It works in our SAP system
-
How can we make the ms-word data as read-only using java code?
How can we make the ms-word data as read-only using java code?