VLAN reports in LMS 3.1

Hey this may be a ridiculous question but I'm running out of ideas. I need to run a report that will display the Voice VLANS on each switchport. We are doing a major phone/VLAN migration and this report will save a lot of time. The current reports I can run only show the current VLAN id and VLAN name. There is nothing that allows me to query the voice vlan on the switchport. All of the edge switches are 48-3750's. Also the phones are Avaya and not Cisco or this would be much simpler.
Any help would be greatly appreciated.
James

This is actually not that easy to do. You can run a User Tracking report, and view All Columns to see the secondary VLANs on ports. However, this assumes that you have acquired end hosts on these ports.

Similar Messages

Vlan/subnet info report on LMS

Hi,
We have lms3.2 sp1 (soon to be upgrading to 4)
Is there a way (report or something else) where if I submit a VLAN, LMS will return what subnets are associated?
example:
[user input]vlan 10
[lms output]1.1.1.1/24
[lms output]2.2.2.2/24
[lms output]3.3.3.3/24

In LMS 3.2 Campus Manager 5.2, use the report generator for VLans.
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_campus_manager/5.2/user/guide_pb/vlanvtp.html#wpxref26730
Step 1 Select Campus Manager > Visualization > Topology Services from the LMS Portal.
The Topology Services Main Window appears.
Step 2 Select a view that contains the device, switch cloud, or the VTP Domain for which you want to view the report.
This view is in the Tree View in the Topology Services Main Window.
Step 3 Select Reports > VLAN Report from the menu.
or
Right-click the VTP Domain or the device, and select Display View.
The Network Topology window appears.
Step 4 Select the device or the switch cloud.
Step 5 Right-click and select VLAN Report from the popup menu.
or
Select Reports > VLAN Report.
The VLAN Report window appears.
Interpreting VLAN Reports
The following information is displayed at the top of the report:
•Device Name
•Device IP
•Device Type
•Domain

Using Adobe Acrobat - Is it possible to execute JavaScript to report to LMS to track pdf was viewed?

Question: Using Adobe Acrobat - Is it possible to execute JavaScript to report to LMS to track pdf was viewed?
What I would like to do is to create a pdf with an Acknowledgement button that when click will report (via JavaScript) to the LMS (Learning Management System) that the end user viewed/acknowledged the pdf.
Can this be down with JavaScript in this fashion?

Thanks, (My fault, as I should have specified this.) Due to legacy reasons I need to use ie, and so I can't use the PrintPdf firefox plugin. So from reading the rest of that thread, the best method does seem to be to get hold of a copy of acrobat, and add a Print() script in each file, and open it in a new tab.
At least it gives me somethigin to try anyway :-)

Whats the difference between "Reporting to LMS as Score" vs "Reporting to LMS as Percent"

Whats the difference between "Reporting to LMS as Score" vs "Reporting to LMS as Percent" when you are doing a quiz.
Im trying to decide whether or not to click the score or percent option. On my LMS I want to report a grade from the user.
Thanks

Lilybiri
I found a link on the captivate blog that talks about captivates reports scores and not the percentage. Although I have captivate version 5.5. I would like to report the percentage of this module instead of the score. do I still need to download the patch inorder to report a percentage?
Here is the link: http://blogs.adobe.com/captivate/2010/10/patch-to-fix-the-issue-with-reporting-percentage- scores-in-adobe-captivate-5.html

Native VLAN discrepancy is not reported in LMS 4.0

Hi all,
I have the following problem in LMS 4.0. I see a lot of CDP syslog messages about Native Vlan Mismatch, but the LMS doesn't report it in the disrepancy report. Why?? The similar problem is with TRUNK VLAN Mismatch.
The customer doesn't use VTP in his network. All switches are in the VTP transparent mode.
See the attachment.
Tank you very much
Roman

Moved discussion to Network Management sub-community for quicker response.
Regards,
Pulkit Nagpal
Community Manager- R&S

Display issues with languages other than English (also related: slide results not reporting to LMS)

Running: Captivate 6
I'm having two
issues that I thought was only tied to Cyrillic characters, but appears to be with multiple languages (confirmed with Brazillian Portugese, Latin American Spanish, Swedish and Russian).
1. Quiz Pass/Fail result message appearing truncated (top and bottom of message is cut off, or message appears wrapped and overlaps)
I've attempted converting the text to a UTF-8 format and tried that as well, but had no success.
2. We have a 108 slide test created in Captivate v6; the English version pushes all 108 slide results to our LMS without issue. When we created the version in Russian, one slide refused to push slide results.
Steps to confirm/resolve:
I've confirmed the settings are identical on the project and on the slide between both the EN and RU versions
I've pasted the russian text into the working EN project and published/tested and that particular slide does not push results to the LMS (the only thing changed was the text on the existing slide)
I've tried duplicating working slides and replacing text; it fails to report
I've tried converting the text to a UTF-8 format and replacing the text; again it fails to push slide results to our LMS
I've tried about every option I can to get the RU version fo the test working (pushing results for all 108 slides); Out of desperation I've created a work around which is putting the question and answer options in as images (not text) and then the test pushes all 108 slide results. This leads me to believe that the issue is regarding how the font is viewed/read by Captivate 6 and ultimately reported to our LMS (SABA).
I've reached out to our localization company (SDL) and their only suggestion was the UTF-8 formatting (which failed).
Please help! Thanks!!

Hi,
If your homepage framework is working for German language then check if your setting are properly maintain for Area Group Key SAPDEFAULTESS_ERP2005 in French Turkish Portugese..
Solution:Login to system in each language i.e FR, TR, PT
navigate to SPRO>FA>TM>ESS>Homepage FR> select Header & Area Group Pages>
Select Define Area Group Pages > Add Entries> Select the SAPDEFAULTESS_ERP2005 Key check weather the Area Group
Role Text is maintain for FR TR PT if not maintain the translation your problem will be resolved.
Do let me know the status of homepage..
Regards
Swapnil

Slide views only to be reported, but grade is reporting to lms as 0 instead of n/a

My client has a number of quiz questions throughout their course. They asked that the quiz be set up to allow infinite attempts until the learner gets the answer right, and that there are no points or grade associated with the quiz. I've set up each question as a quiz question, but set the grade to be 0. I did it as a quiz question as there are matching type questions, multiple choice, etc. and I found it valuable to have the structure in place to add in the content. The reporting preferences are set up as to report back slide views only, but when this file communicates with the LMS, it is reporting back a pass/complete but giving a grade of 0. I'd like it to show up as n/a under the grade rather than 0.
Also, this course isn't booking marking and learners aren't happy because when they go back in their answers aren't saving. As well, the client wanted backward movement to be allowed but when the learner clicks the back button to go back through the slides, it automatically resets the question slides and they have to re-answer them to continue. Is there a way to change a setting so that the answers will stay in place?
And my last question (promise, sorry for so many) under the quiz settings and then required there are 4 options. I'm just wondering if anyone can explain these 4 options and what each do, so that I can make sure I'm selecting the best one. Up until now it's been a trial/error type of thing, but it would be great if anyone can share some additional info.

Thanks so much! I'm the only one working in Captivate, and so I can't even tell you how helpful it is to have replies and people that understand what I'm asking.
I looked into the manifest file, but I couldn't seem to find the masteryscore text. Here's a copy and paste of my manifest file. Am I missing something?
<?xml version="1.0" encoding="UTF-8" ?>
<manifest identifier="captivate client and family centred care_ID" version="1.3" xmlns="http://www.imsglobal.org/xsd/imscp_v1p1"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:imscp="http://www.imsglobal.org/xsd/imscp_v1p1"
xmlns:adlcp="http://www.adlnet.org/xsd/adlcp_v1p3"
xmlns:imsss="http://www.imsglobal.org/xsd/imsss"
xsi:schemaLocation="http://www.imsglobal.org/xsd/imscp_v1p1 imscp_v1p1.xsd
      http://www.adlnet.org/xsd/adlcp_v1p3 adlcp_v1p3.xsd
      http://www.imsglobal.org/xsd/imsss imsss_v1p0.xsd
      http://ltsc.ieee.org/xsd/LOM lomStrict.xsd">
<metadata>
<schema>ADL SCORM</schema>
<schemaversion>CAM 1.3</schemaversion>
<lom xmlns="http://ltsc.ieee.org/xsd/LOM">
   <general>
    <identifier>
     <catalog>Adobe Captivate Course</catalog>
     <entry>captivate client and family centred care_ID</entry>
    </identifier>
    <title>
     <string language="x-none">captivate client and family centred care_Course_Title</string>
    </title>
    <description>
     <string language="x-none"></string>
    </description>
    <keyword>
     <string language="x-none"></string>
    </keyword>
   </general>
   <lifeCycle>
    <version>
     <string language="x-none">1.0</string>
    </version>
    <status>
     <source>LOMv1.0</source>
     <value>final</value>
    </status>
   </lifeCycle>
   <metaMetadata>
    <identifier>
     <catalog>test</catalog>
     <entry>test 1000</entry>
    </identifier>
    <metadataSchema>LOMv1.0</metadataSchema>
    <metadataSchema>SCORM_CAM_v1.3</metadataSchema>
   </metaMetadata>
   <technical>
    <format>text/html</format>
    <location>.</location>
   </technical>
   <educational>
    <typicalLearningTime>
     <duration>PT0H0M</duration>
     <description>
      <string language="x-none">Average length of time to experience this Adobe Captivate Project.</string>
     </description>
    </typicalLearningTime>
   </educational>
   <rights>
    <cost>
     <source>LOMv1.0</source>
     <value>no</value>
    </cost>
    <copyrightAndOtherRestrictions>
     <source>LOMv1.0</source>
     <value>no</value>
    </copyrightAndOtherRestrictions>
   </rights>
   <classification>
    <purpose>
     <source>LOMv1.0</source>
     <value>idea</value>
    </purpose>
    <description>
     <string language="x-none"></string>
    </description>
    <keyword>
     <string language="x-none">Adobe Captivate</string>
     <string language="x-none"></string>
    </keyword>
   </classification>
</lom>
</metadata>
<organizations default="captivate client and family centred care_ID_ORG">
<organization identifier="captivate client and family centred care_ID_ORG">
   <title>captivate client and family centred care_Course_Title</title>
   <item identifier="captivate client and family centred care_ID_SCO" isvisible="true" identifierref="captivate client and family centred care_ID_SCO_RES">
    <title>captivate client and family centred care_SCO_Title</title>
    <imsss:sequencing>
     <imsss:objectives>
      <imsss:primaryObjective objectiveID="PRIMARYOBJ" satisfiedByMeasure="false">
      </imsss:primaryObjective>
     </imsss:objectives>
     
     <imsss:deliveryControls completionSetByContent="true" objectiveSetByContent="true"/>
    </imsss:sequencing>
    <adlcp:dataFromLMS>.</adlcp:dataFromLMS>
    <adlcp:timeLimitAction>exit,message</adlcp:timeLimitAction>
   </item>
</organization>
</organizations>
<resources>
<resource adlcp:scormType="sco" identifier="captivate client and family centred care_ID_SCO_RES" type="webcontent" href="captivate client and family centred care.htm">
   <file href="captivate client and family centred care.swf"></file>
   <file href="captivate client and family centred care.htm"></file>
            <file href="SCORM_support/scorm_support.htm"/>
            <file href="SCORM_support/scorm_support.js"/>
            <file href="SCORM_support/scorm_support.swf"/>
</resource>
</resources>
</manifest>

Adobe Presenter 9 quiz results reporting to LMS

We have over 50 users of AP9, and currently use a Success Factors LMS. Our AP9 quiz results are currently reporting only the cut/mastery score to the LMS student transcript, not the actual score the student gets. Any ideas? I've read all the help and tutorial material and it does not address the actual score reporting anywhere. What are the correct quiz and Reporting options settings to get actual scores reported for a final quiz? We SCORM wrap v1.2. Our LMS suppport says it is pulling what AP9 sends- which is the cut score. When we test as a learner, we can get 100% but if the mastery score is set at 80% we see as a learner we acheived 100% but only 80% score goes to our transcript. Does AP 10 function differently in this aspect than AP 9?
Thanks, Elizabeth

Hello,
I am experiencing a similar issue. Was a resolution ever found?

Contract Connection reports in LMS 3.2

I'm attempting to run this report and it's not recognizing my id/password.
However on my old server which is running LMS 3.1 this report runs fine. I'm not mistyping my id/password I have confirmed that I'm not. See screenshot of error is this a bug?

This is a known issue. Development is working on it to correct the Cisco.com side so it reports the correct contracts. As of now, there is no workaround within LMS.

Interface report in LMS 4.0.1

Hi,
we have LMS 4.0.1 and we have defined some pollers for measuring traffic in some interfaces of several devices. Sometimes we need to obtain a performance report of a certain interface, how can we get a report that shows only the traffic for that specific interface?
As fas as I know, when generating reports we cannot select an interface, only devices or pollers, and with these methods, we obtain data from more interfaces than the specific one that we need. Is there any way for doing what we need?

Currently ifAlias polling is not supported but a feature enhancement bug does exits and its not resolved as of yet.
CSCta01058 HUM: support for SNMP oids type Octets (strings)

Core switches experience High CPU while generating syslog report from LMS

Hi Everyone,
Are there anyone who experience that the CPU utilization of some devices went up while generating a report from RME. Basing from other monitoring tool SNMP is taking up a huge cpu process. Any idea why this happened considering that the report is generated daily but only on one instance it caused the core switches to be paralyze due to high cpu. Changing the SNMP community string is the immediate action that resolve the issue to disconnect it from LMS.
BTW, this is LMS 2.6.
Thank you.

The problem did not reoccurred any more. When I checked on the Syslogcollector.log it appeared that it is unable to subscribe. I assumed that the reason why snmp packets were flooded during the time that it they experience high cpu is because the client is generating syslog report for all devices while the syslog collector is not subscribe. Is this possible?
Thanks

Generate SNMP Traps report from LMS database

Hi Experts,
Just wondering how LMS handle all SNMP traps received by LMS? Are the traps keep into a database on the server? Is there a way to extract them out as a report?
Regards,
Yi Shyuan

Hello,
Thank you for your answer, unfortunately this isn't what I was looking for.
My idea was to generate fake-positives traps to test efficiently our NMS station.
Traps that I would like to tests would be Temperature, Fan, Board.
I found that chaning the yellow level of the temp sensor to the lower threshold can provide some start point, but I would like to ensure when a real event arrives that my NMS will react accordingly.
Thanks

Interafce utilization report in lms 3.1

Hi I have installed LMS 3.1 at ine of our customer. when we are extracting interface utilization report(HUM interface report) It gives me the graphs which are in format of packets/second or value in % . Customer want a simple report which will give him the graps in bite or Kb per second. even if when the operator will pull the report the report should be generated simplly port utilization for both RX and tx in Kb or Mb insted of octate/packets per second.
Is it possible ? if it is possible please guide me how to configure the report template.

Hi Joe,
Can you clarify if this is correct
( Avg % Rx + Avg % TX ) x Total Bandwidth configured on interface/100 = Total Bandwidth Utilization
For eg: Avg % Rx=11
            Avg % Tx=11
            Interface= Gigaethernet 1/1
            Bandwidth 465000
Bandwidth= 465000= 46.5 Mbps
Now Applying formula = (11+11) x 46.5/ 100 = 10.23 Mbps i.e actual interface utilization
Regards
Gautam

Specific Question Reporting in LMS

Hi I've been using Captivate for a few months, and I've recently gotten a module together and am hosting it on SCORM cloud. My module contains some quiz slides, however I'm finding the reporting I'm getting back a bit odd, I'm
sure it's user error but I'm unclear what I'm doing wrong…I'm getting the info about who is taken the quiz and how long they've taken etc, but what I need to know is the specific answers they have given, i.e. have they answered A B C or D.
I've been making the quiz slides myself with click boxes and actions, and including them in quiz reporting, but I'm unclear how I can then get each question and answer I've created to show up in the SCORM reporting…for example, most of the specific reporting looks like this:
2015-02-27T15:34:20.387
[USER} correctly answered 'Question 6888' with response '1'
I'd like to be able to specify the question number myself (not sure where the 6888 is coming from) and make it so the response was "A" or any of the other selections. Is this possible?
Hopefully this is clear enough, I'm pretty new to the game. Thanks for any help in advance!!

I should add to the above that I'm making my own quiz slides. Still looking for an answer to this problem, so far what I've been doing as a workaround is putting the result of the question in the Interaction ID...ie "Question1DINCORRECT" or "QUESTION 2ACORRECT", that way I can at least see what they answered. When I was looking at the SCORM data I saw this:
"result": {
"success": true,
"response": "1"
This is where the LMS is getting the data, but I have no idea how to change it so the reporting could say User X incorrectly answered Question 1 with response D...hopefully this makes sense. Any help greatly appreciated!!

Custom Quiz with Master Widget not reporting in LMS (Captivate 5.5)

Hello,
I have written a custom quiz with partial scoring and, in order to report answers, I am using the Master Widget. (Huge thanks to Lilybiri and Infosemantics for all of the guidance I have found in blogs and e-learning classes!)
In summary, the quiz is composed of 2 questions with 4 possible answers each. Each of the 4 answers have a different score attached to it (i.e. answer a = 4 points; answer b = 3 points; answer c = 2 points; answer d = 1 point). On each question slide I have added a Master Widget (using the variable representing the points the student received as a slave object). I want the quiz to report the score for each question. After the student has answered both question slides, they continue to a "Results" slide. Here they view the total of their scores and get feedback on if their total is to high, too low, or in-line. On the results page I have used the Master Widget to report the total score to the quiz.
I have uploaded this quiz as a SCORM package to both Moodle 2.3 and Blackboard 9 (we are trialing different LMS systems). The quiz runs great in each LMS but when I try to access a report, I don't get any results: no report of the points received for each quiz item and no score total. In fact, in Blackboard I get a blank page:
In Moodle, I get:
Here is what my quiz preferences look like:
I am really stuck. I realize there are a lot of components to this process and I really need some help to find out where the problem lies.
Thank you for your time and help!!!

Bray,
Yes the figures shown on the Quiz Results slide are important because they indicate some of your widgets or other interactive objects are not being reported to the 'official' quiz score.
You need to go back and check the objects that you want to be included in the score. The 67% score reported by the quiz on the quiz results slide probably means that Captivate thinks you only have three objects reporting to the quiz and only two of those (two thirds or 67% in round figures) were successful.
You mentioned before that you have three Master widgets in this project. How many of them are set to report to the quiz? To test whether they're all reporting success, turn on Success and Failure captions for these widgets and then run through your interaction.
When using Slave Variables with the Master widgets for partial scoring, don't forget that although the Master widgets might count these variables as being interactive objects, Captivate does not.
Although the Master widget is VERY powerful, it also tends to mess with people's minds because there are just SO many ways you can configure it. If using partial scoring, check whether or not you have the option set to over-ride the widgets own assigned score with the total points score from the slave objects. If you use this option, you need to make sure that at no time can the over-ridden score fall outside the 0-100% range that SCORM-compliant LMSs will accept.

VLAN reports in LMS 3.1

Similar Messages

Maybe you are looking for