VLAN SETUP - NEEDS YOUR OPINION

HI,
We just purchased 3 Cisco SG200 50 Port Switch. Please bear with me because I am only
new to Cisco switch and no nothing about IOS only rely on GUI. I also have a query on VLANS
settings. I am new to VLANS though I have read information about it and now I am applying it into production.
My first query is:
Is the Cisco SG200 50 Ports Switch is a Layer 2 or Layer 3 switch? if Yes how to convert it.
I want to separate all the servers, printers and users into different vlans and switches.
I am not sure as well if this is a good setup.
Switch 1 - VLAN 10 = All the Servers (6 Servers)
     E/01 DC
     E/02 DC
     E/03 FILE STAFF
     E/04 FILE STUDENTS
     E/05 WEB
     E/06 BACKUP
Switch 1 - VLAN 20 = All the Printers (3 Printers)
Switch 1 - VLAN 30 = Wireless Access Points (5 WAP)
Switch 1 - VLAN 40 = All IP Phones (VOICE) (12 IP Phones)
Switch 2 - VLAN 50 = Staff PC   (40 Machines)
Switch 3 - VLAN 60 = Student LAB 1 (25 Machines)
Switch 3 - VLAN 70 = Student LAB 2 (25 Machines)
A. Let say how can VLAN 50 (staff) access VLAN 10 (servers) without using a Router
and I am only using the said model above? Is this possible?
B. How can I connect VLAN 60 (Student Lab 1) to access on 1 server on VLAN 10 on this port E/04?
C. Also connecting VLAN 50 (Staff PC) to access the Printer on VLAN 20 in switch 1?
D. Do different VLANS mentioned above needs to be in separate subnets or one will work?
Sorry and be patient about me I am just a newbie in Cisco and VLAN.
Any suggestion will highly be appreciated.
Many Thanks.

Hi Arth020271,
Keeping in mind you have a SG200 smart switch that is supported by the wonderful poeple at Small Business Support Center.
There are lots of router choices that support trunked VLANsyou have a few choices.
I persoanally like the SA500 series that supports routing between 16 VLANs, specifically the SA540 due to it's large number of SSL VPN capacity.
Datasheet on this product follows;
http://www.cisco.com/en/US/products/ps9932/prod_models_comparison.html
The benefit of this router is that it is also supported by the Small Business Support Center which makes support for the overall solution much much easier.
If you wish to see the easy GUI of these product, there is also a emulator or simulator for the SA500 product at the URL below.
https://supportforums.cisco.com/community/netpro/small-business/onlinedemos?view=overview%20target=
Remember, these Small Business routers as used for small business, so really, if you have more than 100 IP hosts using the LAN, you might be better off looking at a IOS/CLI solution from a Cisco Partner. These IOS routers can be members of the integrated servicers routers (ISR) models 2900 or 1900. These ISR are better for larger routed networks such as yours.
Since you have over 110 users on your network including voice users, maybe you can have a word to your local Cisco partner and then decide regarding which router best suits your needs.
Regards Dave

Similar Messages

Buying a Macbook pro for the first time and i need your opinion

Hello everyone! I'm buying a Macbook pro for the first time and i need your opinion. I'm a Web Developer / Graphic Designer, and i need this macbook for my work. Currently i have these 2 options:
1) Macbook Pro with Retina (13")
128GB SSD, 2.5GHz Intel i5 Processor, 8GB Ram
2) Macbook Pro i7 (15")
Intel i7 2.6 Processor, 8GB Ram, 750GB HD
So my dilema is. Do i go for the newest 13" Macbook Pro Retina & SSD drive or do i go for the 15" Macbook Pro i7 non-Retina, non-SSD hard drive?
Help this first time Macbook buyer (me) to decide which model to choose

Injektil wrote:
Hello everyone! I'm buying a Macbook pro for the first time and i need your opinion. I'm a Web Developer / Graphic Designer, and i need this macbook for my work. Currently i have these 2 options:
1) Macbook Pro with Retina (13")
128GB SSD, 2.5GHz Intel i5 Processor, 8GB Ram
2) Macbook Pro i7 (15")
Intel i7 2.6 Processor, 8GB Ram, 750GB HD
So my dilema is. Do i go for the newest 13" Macbook Pro Retina & SSD drive or do i go for the 15" Macbook Pro i7 non-Retina, non-SSD hard drive?
Help this first time Macbook buyer (me) to decide which model to choose
Your 2nd choice
2) Macbook Pro i7 (15")
Intel i7 2.6 Processor, 8GB Ram, 750GB HD
is user upgradable. The Retina is not.
No matter what for your needs I would max out the 16GB of RAM

Need your opinion on my project

Hello, i'm building a new project, need your advice on design.http://www.testwebdev.com/azwiki/

Hello, i'm building a new project, need your advice on design.http://www.testwebdev.com/azwiki/

Photog upgrading needs your opinion!

Hello Everyone-Who-Knows-More-Than-Me,
Since I'm sitting at home and thinking about it, I thought I'd throw out a few questions about this brand new iMac 3.06 and see if the answers come back to me. I haven't bought it yet, but I'm ready to upgrade to the new iMac from a G4. I'm a semi-pro photographer, and will be using it extensively for imaging. All your replies will be greatly appreciated!
1) Is the new 24" iMac screen "callibtratable"? More specifically, by a Monaco Optix XR? That's what I have and don't want to buy yet another piece of hardware if possible. And if it's not callibtratable, just what do you photographers do to ensure your colors?
2) The video card issue is beyond my knowledge (thinkin' about the 8800GS/512). I don't intend to play a lot of games, so is that extra video card power I'm not considering worth it to someone who'll primarily be using Aperture, iWeb, and Photoshop CS 2?
3) If you have any hints/tips/suggestions/things you've found that worked really well for you, and have the time to write a few lines, let's hear it.
Thanks!

1)
Well first off for number 1, I do not have an issue with screen problems, the real estate of the size of 24" makes a huge difference in editing photos in Photoshop and Aperture. The speed of the machine makes working in these two programs a cinch.
I haven't used the Monaco Optix XR for calibration, but with the bright screen reflection it could prove problematic. I use the simple calibration in the settings and use the profile on the imac's natural gamma.
2)
I don't intend to play a lot of games, so is that extra video card power I'm not considering worth it to someone who'll primarily be using Aperture, iWeb, and Photoshop CS 2
I don't think the extra power is needed for these applications, I use all three and they work swiftly.
3)
From a g5 machine to the 24" iMac 2.8 Ghz has made a huge difference in speed and larger screen for me as a professional photographer and videographer. Even Apples' studio pro 2 has worked well except for color, I find color slow and not workable on my present system, but all the other programs work well.

Going to Apple Store for Replacement tomorrow Need Your Opinion!!

I been having issues with push notifications from the very beginning when i purchased this phone. i use twitter often and this NEVER happened on my other iphones so I'm getting replacements. Is there any way I can test it out if it works or not at the apple store or do i need to get my phone activated again? also would they take out the sim card for me since i dont know how and put it back inside the new phone or do they only remove it and do i need to have it get it popped back the sim card at the verizon place?? it would be very nice if i can test this out cus im tired of keep getting buggy iphones.

Make sure your iPod is backed up (connect it to your computer and sync it if you can), then take just the iPod Touch to the Apple Store. Bring money or a credit card.

Need your opinion about Satellite A110-153

Hi,
I??m new here and I??m looking for a notebook. The A110-153 sounds interesting for me.
Could anyone give me more information like reviews what are the + and - of the product?
Also I saw on a website that has this notebook has 2 hard discs. Is this true? I can't find it anywhere (toshiba.com). Also I find this odd, I never heard that a notebook has 2 hard drives or disks.
It??s a pity that this notebook has an integrated video card I think.
What I want to do with the notebook is the following:
- Internet
- Ms office
- working with pictures (I have a digital photo camera and soon a digital video camera)
- A little Photoshop
What??s your advice?

Hi
I have found some pictures of the Satellite A110-153 and in my opinion the notebook looks very nice
The notebook supports Intel Core Duo (Yonah) processor T2050 1.6GHz and you can upgrade the memory up to 4GB
I dont know where you found the information about 2 HDD but as far as I know there is only one 100GB HDD installed.
But I found one disadvantage. The notebook support s only a Intel 945GM 8-128 MB shared memory graphic card.
But dont worry, Its strong enough for working with picture and MS office applications.

Need your opinion on usability of ms word .rft to make a business document

Im new to xml & bi publisher. Below is a xml data set Im using (shown as 1 record) Im testing with about 20
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
- <CUSTLBL>
- <LIST_G_CUSTOMER>
- <G_CUSTOMER>
<ACCOUNT_NUMBER>012345</ACCOUNT_NUMBER>
<PARTY_NAME>FURNITURE INC</PARTY_NAME>
<ADDRESS1>1 MAIN STREET</ADDRESS1>
<ADDRESS2>APT 4B</ADDRESS2>
<CITY_STATE_ZIP>BROOKLYN, NY 11222</CITY_STATE_ZIP>
</G_CUSTOMER>
</LIST_G_CUSTOMER>
</CUSTLBL>
I created an .rft with a header that has "Order Acknowledgment" in it
I inserted a table
I moved the table to the position I wanted on the right side of the page
so what I have left is a saved .rtf like below:
<word header displaying Order Acknowledgment>
for-each G_CUSTOMER
<2x7 table>
page breakend G_CUSTOMER
I preview as pdf or rtf and the 2X7 table shifts to the left margin for every customer
do I have to battle with ms word settings just to get this to position the way I want?
is there no wysiwyg template maker?
thanks in advance for any advice you can give

Not sure what issue you're hitting but try this:
Make the table span across the whole page - add an empty table cell on the left of your existing cell. You'll get better control of positioning then.
Make sure you don't have any spaces anywhere.
Also, perhaps you're hitting something like this:
http://garethroberts.blogspot.com/2009/11/bi-xml-publisher-54pt-start-indent.html
Regards,
Gareth

My results of bi_checkconfig.sh, need your opinion

Hi,
I ran bi_checkconfig.csh:
[oracle@d-sfo06-83-170]% ./run-biChk.sh
+ JDEV_ORACLE_HOME=/dan/jdev903
+ export JDEV_ORACLE_HOME
+ ./bi_checkconfig.csh -h localhost -po 1521 -sid X -u BIBDEMO -p BIBDEMO
BI Beans Diagnostics(v1.0.0.0) 12/28/03
===============================================================================
JDEV_ORACLE_HOME ............................. = /dan/jdev903
JAVA_HOME .................................... = /dan/bea/jdk141_03
JDeveloper version ........................... = 9.0.3.1.1107
BI Beans version ............................. = 9.0.3.6.0
BI Beans internal version .................... = 2.7.0.13.1
Connect to database .......................... = Successful
JDBC driver version .......................... = 9.2.0.3.0
JDBC JAR file location ....................... = /dan/jdev903/jdbc/lib
Database version ............................. = 9.2.0.3.0
OLAP Catalog version ......................... = N/A
OLAP AW Engine version ....................... = N/A
OLAP API Server version ...................... = N/A
BI Beans Catalog version ..................... = N/A; not installed in BIBDEMO
OLAP API JAR file version .................... = 9.2
OLAP API JAR file location ................... = /dan/jdev903/jdev/lib/ext
Load OLAP API metadata ....................... = Successful
Number of metadata folders ................... = 2
Number of metadata measures .................. = 8
Number of metadata dimensions ................ = 9
Metadata output location ..................... = /home/dan/jdev903/bibeans/bin/bi_metadata.txt
The "N/A" values for "OLAP" entries are troublesome.
I assume that "OLAP Catalog version" should have a version.
true?
-atm

The OLAP catalog version should be displayed as part of the output. From the diagnostic information it would appear that your OLAP catalog is not installed. Try running the following as SYS user on your instance
column comp_name format a35
SELECT comp_name
, status
, substr(version,1,10) AS version
FROM dba_registry;
This will list out the installed options in your instance. You should get something like this:
COMP_NAME STATUS VERSION
----------------------------------- ----------- ----------Oracle9i Catalog Views VALID 9.2.0.3.0
Oracle9i Packages and Types VALID 9.2.0.3.0
Oracle Workspace Manager VALID 9.2.0.1.0
JServer JAVA Virtual Machine VALID 9.2.0.3.0
Oracle XDK for Java VALID 9.2.0.3.0
Oracle9i Java Packages VALID 9.2.0.3.0
Oracle interMedia VALID 9.2.0.3.0
Spatial VALID 9.2.0.3.0
Oracle Text VALID 9.2.0.3.0
Oracle XML Database VALID 9.2.0.3.0
Oracle Ultra Search VALID 9.2.0.3.0
Oracle Data Mining LOADED 9.2.0.1.0
OLAP Analytic Workspace UPGRADED 9.2.0.3.0
Oracle OLAP API UPGRADED 9.2.0.3.0
OLAP Catalog VALID 9.2.0.3.0
I presume you built your instance using the 'Data Warehouse' database template? If not, then it is unlikely you have the correct the options installed. If this is the case try running the following packages to install the OLAP option:
connect / as SYSDBA
create tablespace CWMLITE logging datafile 'cwmlite01.dbf' size 20m reuse autoextend on next 640k maxsize unlimited extent management local segment space management auto;
@?/olap/admin/olap.sql mysid
@?/cwmlite/admin/oneinstl.sql CWMLITE TEMP;
My personal prefence would also be to upgrade to 9.2.0.4.1 as this is the latest patchset.
Hope this helps
BI Beans Product Management Team
Oracle Coporation

I need your expert opinion on how to create a map with multiple conditions.

Hello.
I need your expert opinion on how to create a map with multiple conditions.
I have a procedure (which i cannot import or re-create in OWB due to the bug), so i am trying to create a map instead :-(
How can i create a cursors within the map?
My function creates table and cursor.
Then it will have to check for duplicates in the tables (the one created and another table) - the criteria for finding duplicates is a number of fields.I then need to place few different conditions (if some attributes are not available) and it has to load cursor based on this conditions. The next step is to fetch the data into the cursor based on what attributes are missing.
The next thing it will do is insert the data into table (if record doesn't exist), output the error in separate table is record is corrupted, or update the record with changed information.
In short i need to re-create match / merge but with conditions, iterations etc 'built into' it.
I can read up on available functions - it's just what would be the best options? and what would be the best approach to do so?
In my function i use %rowtype - but cannot use it in owb - so what would be the alternative? i don't really want to create a lot of variables and then have a nightmare of maintaing it. are there any tips regarding this?
having looked through Oracle dedupe - it's not really what i need because it is just DISTINCT.
I would appreciate any help / advise on this.
Thank you very much

thanks a lot for your reply - i will look into this option :-)
it is a bit more complicated now as i have to re-create the match / merge and then somehow 'tweak' it to achieve the result i need.
At the moment i am looking to breakdown the package into smaller chunks 'functions' and try creating the map that way.
Anyway, thank you very much for your suggestion.

Hey guys I was wondering do I need an anti virus software on my mac? I don't think I need it but as a first time mac user I wanted your opinion.

Just wanted to get your opinion.

This comment applies to malicious software ("malware") that's installed unwittingly by the victim of a network attack. It does not apply to software, such as keystroke loggers, that may be installed deliberately by an attacker who has hands-on access to the victim's computer. That threat is in a different category, and there's no easy way to defend against it. If you have reason to suspect that you're the target of such an attack, you need expert help.
All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files. The recognition database is automatically updated once a day; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders. In most cases, there’s no benefit from any other automated protection against malware.
Starting with OS X 10.7.5, there is another layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications that are downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Applications certified in this way haven't actually been tested by Apple (unless they come from the Mac App Store), but you can be sure that they haven't been modified by anyone other than the developer, and his identity is known, so he could be held responsible if he knowingly released malware. For most practical purposes, applications recognized by Gatekeeper as signed can be considered safe. Note, however, that there are some caveats concerning Gatekeeper:
It doesn't apply to software that comes packaged as an installer. Treat all third-party installers with caution.
It can be disabled or overridden by the user.
It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets (see below.)
It only applies to applications downloaded from the network. Software installed from a CD or other media is not checked.
For more information about Gatekeeper, see this Apple Support article.
Notwithstanding the above, the most effective defense against malware attacks is your own intelligence. All known malware on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "trojan horses," which can only have an effect if the victim is duped into running them. If you're smarter than the malware attacker thinks you are, you won't be duped. That means, primarily, that you never install software from an untrustworthy source. How do you know a source is untrustworthy?
Any website that prompts you to install a “codec,” “plug-in,” or “certificate” that comes from that same site, or an unknown one, is untrustworthy.
A web operator who tells you that you have a “virus,” or that anything else is wrong with your computer, or that you have won a prize in a contest you never entered, is trying to commit a crime with you as the victim. [Some reputable websites did legitimately warn users who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.]
“Cracked” copies of commercial software downloaded from a bittorrent are likely to be infected.
Software with a corporate brand, such as Adobe Flash Player, must be downloaded directly from the developer’s website. No intermediary is acceptable.
Java on the network (not to be confused with JavaScript, to which it's not related) is always a potential weak spot in the security of any operating system. If a Java web plugin is not installed, don't install it unless you really need it. If it is installed, you should disable it (not JavaScript) in your web browsers. Few websites have Java content nowadays, so you won’t be missing much. This setting is mandatory in OS X 10.5.8 or earlier, because Java in those obsolete versions has known security flaws that make it unsafe to use on the Internet. The flaws will never be fixed. Regardless of version, experience has shown that Java can never be fully trusted, even if no vulnerabilities are publicly known at the moment.
Follow these guidelines, and you’ll be as safe from malware as you can reasonably be.
Never install any commercial "anti-virus" products for the Mac, as they all do more harm than good. If you need to be able to detect Windows malware in your files, use the free software ClamXav — nothing else.

I need your help and opinion on JNI

I am assigned a task to build one Java API above one existing protocol stack written in legacy C++, which involves UDP and TCP communication.
The C++ code involves callback method.
My qustion is:
1. I only tried some simple examples on one way trasfering, for example, invoke c++ from Java (HelloWorld example), and either invoke Java from C++. Is it possible to do it all together? I mean invoke C++ from Java and invoke Java from C++ for the callback methods at the same time?
2. Is it possible to do this with JNI? I doubt because it involves callback method in C++ code, so in Java, a interface should be created with the callback method declared inside it.
I really need your help!

1. Yes it is possible to call out of java into C, and back into java from C. And the tool of choice is JNI.
2. You better buy a JNI book.
3. As you get into it, you will probably find that designing around threading issues become important. Scan this forum.

N73ME Update: Your Opinion Needed

The current firmware version on my mobile is 4.0727.2.2.1
Each time a new firmware was released i really didn't want to upgrade to it bec of the bugs i heard it contained.
And now, with the release of this new firmware 4.0812.4.2.1, i really would appreciate your opinion, is it worth that i upgrade to this fw, or should i stick to mine (knowing that i have no complains about my fw).
Thanks alot in advance

if u dont have anyting to complain about ur current firmware den i would recommend u not to upgrade ur n73 firmware. Nokia have trully destroyed the N73 with these firmware updates for example musci player crashes, camera blue noise. etc
If you find my post useful then click on
Kudos!Nokia N96 (v20.050 / RM-247)
www.shaysoft.net | Competitions!

VLAN setup at home

I'm definitely out of my comfort zone here...but after reading a bit, I think a VLAN setup is what I'm after. I'd like 2 networks at my house sharing the internet connection. One network for my computers, One network for my kids. The purpose is security...my kids have been bringing home biological virus' since they were tiny...I'm certain they're the ones who'll let something in the house now as well.
I have a WRVS4400N small business router with VLAN capability. I've explored the setup pages and can't make heads or tails of what I'd need to do there. I've set up 2 BSSID's and isolated them, next I'd like to set up the vlans and assign the bssids to them. Can someone look at this setup pic and walk me through this? I appreciate the education!
Alternatively, if vlan is not the solution for my purpose, I'm open to suggestions. Thank you for your consideration.
-Scott

These might help.
https://www.myciscocommunity.com/message/36120;jsessionid=31011407BD6D879C90AF5B18540D3634.node0
https://www.myciscocommunity.com/thread/7996;jsessionid=8844A249A148FC7E71732CEBFA84EE42.node0?tstart=-1
http://www.cisco.com/en/US/docs/routers/csbr/wrvs4400n/administration/guide/WVRS4400N_Admin_Guide_v2.pdf
Shell.

VLan setup for a 2950 and 2611

Im trying to setup a real basic VLan setup for 1 2950 switch. I would like to have 3 Vlans on it including the default Vlan. So my understanding is that for all 3 of the VLans to talk to each other I will need a router to be the layer 3 device that routes the Vlans.
On my 2611 it looks like this:
interface Ethernet0/0
no ip address
full-duplex
interface Ethernet0/0.1
encapsulation dot1Q 1 native
ip address 172.16.10.1 255.255.255.0
no snmp trap link-status
interface Ethernet0/0.2
encapsulation dot1Q 2
ip address 172.16.20.1 255.255.255.0
no snmp trap link-status
interface Ethernet0/0.3
encapsulation dot1Q 3
ip address 172.16.30.1 255.255.255.0
no snmp trap link-status
Then my 2950 looks like this:
interface FastEthernet0/1
description Connection to router
switchport mode trunk
speed 10
duplex full
interface FastEthernet0/2
switchport access vlan 2
interface FastEthernet0/3
switchport access vlan 3
interface Vlan1
ip address 172.16.10.2 255.255.255.0
no ip route-cache
ip default-gateway 172.16.10.1
Ok so as it currently stands the switch and router will not talk to each other at all. From the switch I can not ping the router and vice a versa. If I plug a laptop into one of the ports using VLan1 I can ping the switch IP 172.16.10.2 but obviously can not ping the default gateway which is the router...
I didnt think this looked very hard but for some reason it does not want to work for me at all...
Any ideas?
LR

I have two things you might try. First set your trunking interface on your switch to auto.
interface fastethernet 0/1
speed auto
duplex auto
This will help to make sure that the ethernet on the 2611 will negotiate the duplex with the switch. I've had issues with 2611's trying to do full duplex on there ethernet ports.
Another Option turn on CDP on your router and switch and do a show cdp neighbor to make sure there plugged into the right ports.
Three you could move the vlan 1 ip address on the 2611 to the main interface. Example below. Then try pinging the switch. Your other tagged vlans should still work at that point. Also if you have multiple switches make sure to setup Vlan Trunk Protocol see NOTE A.
no interface Ethernet0/0.1
no encapsulation dot1Q 1 native
no ip address 172.16.10.1 255.255.255.0
no snmp trap link-status
interface Ethernet0/0
ip address 172.16.10.1 255.255.255.0
NOTE A
Add the following commands to each switch to setup your Vlan Trunk Protocol. These are pretty much the minimum amount of commands you can use to setup VTP.
vtp domain CISCO1
vtp version 2

Cisco vlan setup w a windows 2003 dhcp server help

Can anyone give me some tips or point me to some documentation on setting up a catalyst 4500 series w vlans and a windows 2003 server w associated dhcp scopes? Just for curiosity, what is a good vlan design for a college. I was thinking a student, a staff, a faculty, and a guest and or mgmt vlan. Also, on the guest vlan how would I setup an outbound acl to only allow port 80 traffic? Thanks in advance.

Hi
Try to limit the number of users per vlan to no more than a class C subnet if you can. We use half a class C /25 network in our offices.
If you can break up the vlans to match the different type of users then that would be a good start. It means you can further down the line apply different security policies to the different vlans which in your situation you may well want to do. Don't worry if for example you need to use 2 or 3 vlans for students it's not a problem.
Attached is a link for 4500 configuration. You need to look at the following chapters primarily
1) Configuring VLAN's VTP & VMPS.
2) Configuring Layer 3 interfaces. Look at the section on logical layer 3 SVI's.
http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/31sg/configuration/guide/conf.html
On the guest vlan you would need something like (assuming guest vlan subnet range is 192.168.1.0/24
access-list 120 permit tcp 192.168.1.0 255.255.255.0 any eq www
access-list 120 deny ip 192.168.1.0 255.255.255.0 any
and apply it on the inbound vlan interface. ie. if your vlan for guest users is vlan 20
switch(config)# vlan 20
switch(config-if)# ip access-group 120 in
As for the W2003 server, not done much with windows. You will need DHCP manager which should be under admin tools. Make sure you exclude the addresses for each subnet that you allocate to the 4500 layer 3 interfaces ie
switch(config)# vlan 20
switch(config-t)# ip address 192.168.1.1 255.255.255.0
In your DHCP scope 192.168.1.1 will be the default gateway for your clients and you should exclude this from the scope.
Hope this is enough to get you started
Jon

VLAN SETUP - NEEDS YOUR OPINION

Similar Messages

Maybe you are looking for