VLAN Spanning-tree (VSTP) issue with Metro-E links

Hi Everyone,
We have Juniper EX 4200 as core switch at two sites connected Cisco  2960s and Cisco 3560s (access layer switches). For even-numbered VLANs,  one Juniper switch is root bridge and for odd-numbered VLANs, other  Juniper switch is the root bridge.
We have Cox and Verizon Metro-E links connecting core switches (Juniper EX 4200 at both sites).
I want to do VLAN load sharing using VSTP but somehow it is not  working as expected. I want to pass some VLANs through COX and some  through Verizon. When there is any issue with Cox, all VLAN traffic pass  through Verizon and vice-versa. RSTP is also enabled on both Juniper  switches.
I see MAC flapping in log messages on all Cisco access layer switches  when I bring up both Metro-E links together. When only Cox is  connected, everything works fine. When only Verizon is connected,  everything works fine. But when BOTH COX and Verizon are connected,  network gets disrupt and I see MAC flapping on all Cisco switches. All  cisco switches are running PVST.
Anybody knows what is happening  and why VSTP is not working when both COX and VERIZON Metro-E links are active ?

Hi Tojackson, I guess this depends on how stuff is interconnecting. It's obvious gi1/1 is forwarding and gi1/2 is blocking. So from the furthest access switch, what path must it take to reach gi1/1? That is the number of hops involved for normal traffic.
Now, if you're concerned about a specific VLAN and you need gi1/2 forwarding to reduce travel time for other traffic, you may employ RPVST to have that specific VLAN and cost to go to gi1/2.
In some part of the network I support we have a pair of Cisco 7606 which feeds in to a 4507R and off the 4507R we have a ring of 2955 with even 10-12 L2 switches on the ring. The consequence of multiple layer 2 hops is not of much concern and our spanning tree stops with the 4507 since we're not concerned about broadcast storm on the routed interfaces on the 7600.
-Tom
Please mark answered for helpful posts

Similar Messages

  • Issues with using relative links in Captivate 8

    Is anyone else having issues with using relative links in Captivate 8?  These links all used to work in the previous version of Captivate. And I could have sworn this was fixed already once in Captivate 8 but it's popping up again for us. Here is the situation... We have courses that are made up of multiple lessons which as separate Captivate files. Within those lessons are buttons to link to external documents (which live in a shared document folder), demonstrations, etc.  We use relative links because we post these to our amazon servers and we also sell them to clients where they can post them on their own web servers or in their LMS.  SO we can't put in full paths for the links or we'd have to change them constantly.  So an example is that the link for a button might be "../Document/nameofdoc.pdf"  This would be going to a user guide or something that is posted in the "Document" folder that lives at the same level as the lesson's folder. But now, all of the sudden, none of our bazillion links is working. And I've tried buttons, hyperlinks, and even the old click box. Nothing works with relative links. And I did check the permissions on every file and folder on our Amazon server to verify nothing changed there as well.   Any suggestions?

    I have the same issue with relative links using Captivate 8.  I am trying to load Captivate modules into an LMS using relative links to document files within the LMS.  The links work fine during a site page test so not an issue in the LMS, but from the Captivate module they aren't working....
    Help?

  • Issue with Open Enrolment Link in ESS - Benefits

    Hi Experts,
    We are facing two issues with open Enrolment Link in ESS for benefits, Need your help in resolving this. Please find the details below :
    1.       Benefits cost is not appearing in open enrolment Screen
    Details : Monthly Contribution cost is not appearing against the Benefits Plan for which employees are already enrolled in Open Enrolment Screen, Because of this employees are not able see previous contribution before deciding on contribution amount for next Financial Year.
    2.       URL for Benefits plan Gets disappeared in Open enrolment Screen
    Details : When Contribution is removed for any Benefits Plan the corresponding URL link disappears, But this comes up when the page is refreshed.
    Could you please let us know if this is related to missing configuration or Java webdynpro code.
    Our Live system is ECC6.0 SP level A4 , Please let me know if you need more details.Looking forward for your response.
    Regards,
    Shilpa

    In regards to your first question, it could be a date issue for the infotype record.  If the records for open enrollment are set to be effective for a future date, and the current record is delimited, then you won't see it in the open enrollment screen. This is true for benefits like a flex account because they have to be re-elected every plan year.
    Let's say that any elections made in the current open enrollment period you are in take effect June 1, 2014.  If the current record has an end date before June 1, then in the enrollment screen the employee will not see the current record because SAP is looking at June 1.
    Take a look at the employee's record and at the benefit you want them to see and see what the end date is for the most recent record.

  • Cisco Noob - Layer 3 Routing / VLAN / Spanning Tree

    Hi All ...
    I need some pointers on which commands / settings and where, I know what I want to achieve but the things I am trying seem to be 'mutually exclusive' - either that or i'm missing something - I am not a Cisco IOS expert but I know my way around a network.
    Take 3 3560 switches in Layer 3 mode, there is a 'local' fibre spanning tree ring serving mulriple switches on each, each ring is it's own IP segment / VLAN. There is then a trunk between each switch on which I want to establish a load sharing / spanning tree circuit i.e.
    SW1 hosts VLAN 2 via copper on fa0/1 -12, ip address 10.10.2.254
    SW1 hosts VLAN 3 via a fibre spanning tree circuit on G0/1 & G0/2, dhcp 10.10.3.0/24, trunk 1 on G0/3 and trunk 2 on G0/4
    SW1 hosts VLAN 10, ip address 10.10.10.1 (trunks 1 and 2 have no IP address but are members of VLAN 10)
    SW2 hosts VLAN 4 via a fibre spanning tree circuit on G0/1 & G0/2, dhcp 10.10.4.0/24, trunk 1 on G0/3 and trunk 2 on G0/4
    SW2 hosts VLAN 10, ip address 10.10.10.2 (trunks 1 and 2 have no IP address but are members of VLAN 10)
    SW3 hosts VLAN 5 via a fibre spanning tree circuit on G0/1 & G0/2, dhcp 10.10.5.0/24, trunk 1 on G0/3 and trunk 2 on G0/4
    SW3 hosts VLAN 10, ip address 10.10.10.3 (trunks 1 and 2 have no IP address but are members of VLAN 10)
    SW1 G0/3 is a SMF trunk to SW2 G0/3
    SW1 G0/4 is a SMF trunk to SW3 G0/3
    SW2 G0/4 is a SMF trunk to SW3 G0/4
    The trunks are configured as "trunk encapsulation dot1q", ip routing is  enabled.
    I can get the trunks working OK - but I can't seem to get routing to work across them - if I define an interface on SW1 with an IP set in SW3 the switch complains so it can clearly see it so which command have I missed.
    All VLAN's are part of the same domain, each VLAN has it's own DHCP hosted on it's hosting switch. The VLAN ip address is excluded from DHCP and is the default gateway for each VLAN.
    All VLAN's must be able to reach VLAN2 (contains SQL servers and DNS, Time etc etc), the VLAN's are working, DHCP etc is all working - but I can't get anything other than VLAN 10 IP's to talk across the trunks - I've tried adding spanning-tree vlan 2,3,4,5,10 but this hasn't worked, the ip route-map shows nothing, if you show spanning-tree the trunk ports do show up as an interface for all VLAN's - and yet no traffic passes across them - show route displays nothing. I tried adding ip route 10.10.*.0 255.255.255.0 10.10.2.254 (where 10.10.2.254 is the ip address of VLAN 2) but that's done nothing.
    I have tried various combinations - unsuccessful so far - I need the trunks to be not only fault tolerant but load sharing which kind of negates fixing IP's on them - or does it ?? - what am I missing ?
    (switches are all running IP services IOS)

    Hi John ,, here is the sh ip route and sh ip eigrp from all three.
    The ip address I'm trying to reach from SW1, SW2 is 10.10.2.253 - the DNS server - the server is available and connected to a copper port designated and assigned to VLAN 2 (which has the root ip of 10.10.2.254) dhcp is not enabled for VLAN 2.
    I can ping the DNS box from VLAN 5 (same switch as VLAN 2).
    The copper ports on the SW1 and SW2 boxes refuse to 'come up' - they remain shutdown no matter what. I haven't yet configured VLAN 10 ....
    (NOTE - these switches are on the bench right now - I intend to ge tthe config sorted / tested and verified before they go into production)
    SWITCH 1 - Host for VLAN 3 and 10
    SW1#sh ip route
    Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
           D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
           N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
           E1 - OSPF external type 1, E2 - OSPF external type 2
           i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
           ia - IS-IS inter area, * - candidate default, U - per-user static route
           o - ODR, P - periodic downloaded static route
    Gateway of last resort is not set
         10.0.0.0/8 is variably subnetted, 3 subnets, 2 masks
    D       10.10.2.0/24 [90/3072] via 10.10.10.6, 01:19:29, GigabitEthernet0/2
    C       10.10.10.0/30 is directly connected, GigabitEthernet0/1
    C       10.10.10.4/30 is directly connected, GigabitEthernet0/2
    SW1#sh ip eigrp interfaces
    EIGRP-IPv4:(10) interfaces for process 10
                            Xmit Queue   Mean   Pacing Time   Multicast    Pending
    Interface        Peers  Un/Reliable  SRTT   Un/Reliable   Flow Timer   Routes
    Gi0/2              1        0/0         1       0/1            0           0
    Vl3                0        0/0         0       0/1            0           0
    SW1#
    SWITCH 2 - Host for VLAN 4 and 10
    SW2#sh ip route
    Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
           D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
           N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
           E1 - OSPF external type 1, E2 - OSPF external type 2
           i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
           ia - IS-IS inter area, * - candidate default, U - per-user static route
           o - ODR, P - periodic downloaded static route
    Gateway of last resort is not set
         10.0.0.0/30 is subnetted, 2 subnets
    C       10.10.10.8 is directly connected, GigabitEthernet0/1
    C       10.10.10.0 is directly connected, GigabitEthernet0/2
    SW2#sh ip eigrp interfaces
    EIGRP-IPv4:(10) interfaces for process 10
                            Xmit Queue   Mean   Pacing Time   Multicast    Pending
    Interface        Peers  Un/Reliable  SRTT   Un/Reliable   Flow Timer   Routes
    Gi0/2              0        0/0         0       0/1            0           0
    Gi0/1              0        0/0         0       0/1            0           0
    Vl4                0        0/0         0       0/1            0           0
    SW2#
    SWITCH 3 - Host for VLAN 2, 5 and 10
    SW3#sh ip route
    Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
           D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
           N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
           E1 - OSPF external type 1, E2 - OSPF external type 2
           i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
           ia - IS-IS inter area, * - candidate default, U - per-user static route
           o - ODR, P - periodic downloaded static route
    Gateway of last resort is not set
         10.0.0.0/8 is variably subnetted, 3 subnets, 2 masks
    C       10.10.10.8/30 is directly connected, GigabitEthernet0/1
    C       10.10.2.0/24 is directly connected, Vlan2
    C       10.10.10.4/30 is directly connected, GigabitEthernet0/2
    SW3#sh ip eigrp interfaces
    EIGRP-IPv4:(5) interfaces for process 5
                            Xmit Queue   Mean   Pacing Time   Multicast    Pending
    Interface        Peers  Un/Reliable  SRTT   Un/Reliable   Flow Timer   Routes
    Vl2                0        0/0         0       0/1            0           0
    Vl5                0        0/0         0       0/1            0           0
    EIGRP-IPv4(0)(0) interfaces for process 0
                            Xmit Queue   Mean   Pacing Time   Multicast    Pending
    Interface        Peers  Un/Reliable  SRTT   Un/Reliable   Flow Timer   Routes
    EIGRP-IPv4:(10) interfaces for process 10
                            Xmit Queue   Mean   Pacing Time   Multicast    Pending
    Interface        Peers  Un/Reliable  SRTT   Un/Reliable   Flow Timer   Routes
    Gi0/2              1        0/0         1       0/1           50           0
    Vl5                0        0/0         0       0/1            0           0
    Vl2                0        0/0         0       0/1            0           0
    SW3#
    SW3#show vlan
    VLAN Name                             Status    Ports
    1    default                          active   
    2    SERVERS                          active    Fa0/13, Fa0/14, Fa0/15, Fa0/16
                                                    Fa0/17, Fa0/18, Fa0/19, Fa0/20
    4    DB5-LAN                          active    Fa0/1, Fa0/2, Fa0/3, Fa0/4
                                                    Fa0/5, Fa0/6, Fa0/7, Fa0/8
                                                    Fa0/9, Fa0/10, Fa0/11, Fa0/12
                                                    Gi0/1, Gi/2
    10   MANAGER                          active    Fa0/21, Fa0/22, Fa0/23, Fa0/24
    1002 fddi-default                     act/unsup
    1003 token-ring-default               act/unsup
    1004 fddinet-default                  act/unsup
    1005 trnet-default                    act/unsup
    VLAN Type  SAID       MTU   Parent RingNo BridgeNo Stp  BrdgMode Trans1 Trans2
    1    enet  100001     1500  -      -      -        -    -        0      0  
    2    enet  100002     1500  -      -      -        -    -        0      0  
    3    enet  100003     1500  -      -      -        -    -        0      0  
    4    enet  100004     1500  -      -      -        -    -        0      0  
    5    enet  100005     1500  -      -      -        -    -        0      0  
    10   enet  100010     1500  -      -      -        -    -        0      0  
    1002 fddi  101002     1500  -      -      -        -    -        0      0  
    1003 tr    101003     1500  -      -      -        -    srb      0      0  
    1004 fdnet 101004     1500  -      -      -        ieee -        0      0  
    1005 trnet 101005     1500  -      -      -        ibm  -        0      0  
    Remote SPAN VLANs
    Primary Secondary Type              Ports
    PPS : I'm using ports Gi0/1 and Gi0/2 for now - I removed these from DB5-LAN and can now 'ping' from SW1 but not from SW2 - but the local copper is still dead on SW1 and SW2
    Copper channels not dead - faulty patch lead ... the simplest things ....

  • VLAN spanning-tree root and VLAN L3 SVI

    I have a traditional core/access switches connected, Catalyst 4506 with 802.1Q uplink trunks to two core 6504-E switches. Spanning-tree roots for VLAN's were on core switch with the active HSRP/SVI. Shutdown HSRP/SVI on the cores and moved the SVI to the L3 access switches, but we left the spanning-tree root on the cores... Is this causing the clients/ports in the VLAN on the access switches to do a double/triple hop over the uplink for ingress/egress?  Gig1/1 is the trunkport/uplink to the core, wanted to move L3 functions to the access switch to reduce spanning VLANs across the core network.              
    Current configuration : 253 bytes
    interface Vlan196
    description Tower I - 8th Floor VLAN
    ip address 10.200.196.1 255.255.255.0
    ip access-group 115 in
    ip helper-address 164.103.160.150
    ip helper-address 172.20.135.201
    no ip redirects
    no ip unreachables
    ip pim sparse-mode
    end
    I0504506A8#sh spann          
    I0504506A8#sh spanning-tree vlan 196
    VLAN0196
      Spanning tree enabled protocol ieee
      Root ID    Priority    196
                 Address     6400.f1ee.c140
                 Cost        4
                 Port        1 (GigabitEthernet1/1)
                 Hello Time   2 sec  Max Age 20 sec  Forward Delay 15 sec
      Bridge ID  Priority    49348  (priority 49152 sys-id-ext 196)
                 Address     0015.f960.9ac0
                 Hello Time   2 sec  Max Age 20 sec  Forward Delay 15 sec
                 Aging Time 300
    Interface        Role Sts Cost      Prio.Nbr Type
    Gi1/1            Root FWD 4         128.1    P2p
    Gi1/2            Altn BLK 4         128.2    P2p

    Hi Tojackson, I guess this depends on how stuff is interconnecting. It's obvious gi1/1 is forwarding and gi1/2 is blocking. So from the furthest access switch, what path must it take to reach gi1/1? That is the number of hops involved for normal traffic.
    Now, if you're concerned about a specific VLAN and you need gi1/2 forwarding to reduce travel time for other traffic, you may employ RPVST to have that specific VLAN and cost to go to gi1/2.
    In some part of the network I support we have a pair of Cisco 7606 which feeds in to a 4507R and off the 4507R we have a ring of 2955 with even 10-12 L2 switches on the ring. The consequence of multiple layer 2 hops is not of much concern and our spanning tree stops with the 4507 since we're not concerned about broadcast storm on the routed interfaces on the 7600.
    -Tom
    Please mark answered for helpful posts

  • Issue with normal page link redirecting to SSO page / forbidden page

    Hi,
    I am having an issue with a number of pages within my portal.
    I have a 'List of Objects' that has been working for some time, each link in the list linked to another page.
    Just lately a number of pages that are linked to within this list are not loading correctly.
    When one of the items is selected, the correct page is initially displayed, but then after a couple of seconds the page is redirected to the 'Single Sign-On' page, or alternatively the page is redirected to a 'Forbidden' page with this error:
    Forbidden
    You don't have permission to access /pls/orasso/orasso.wwsso_app_admin.ls_login on this server.
    (This page will also show up after the user tries to login when the page is redirected to the SSO page).
    As well as this issue occuring at the front end, the same issue is happening when the pages are loaded from the back end, in the Navigator.
    This issue is even happening when the page is opened up in 'edit' mode using the ORCLADMIN user.
    Any help is greatly appreciated!!
    Amanda.

    Figured it out...

  • Having issues with .fdf's linking to the document they were creating from in reader 9.1

    I run adobe reader in a citrix enviroment. presentation server 4.0 windows 2003 SP1. We have alot of PDF forms on our file server and what users do is open up one type in the data and then click on submit at the top of the PDF then they email the .fdf that is created either to themselves or someone else on the network (this still functions in 9.1). When using AR7.0 and a user would double click on the .fdf it would automatically put the data in the form it was created from but with 9.1 it doesnt, it opens up explorer and wants you to navigate to the appropiate .PDF to insert the .fdf into. I have 3 citrix servers and I have only upgraded 1 to 9.1 for testing. If the .fdf is created in AR 7.0 it will link to the .pdf if you open the .fdf in either 7.0 or 9.1. But if the .fdf is created using 9.1 it wont link the document in either AR 7.0 or 9.1. 
    Any suggestions would be greatly apreciated
    Thanks

    Have you had any luck with this yet we are having the same issue with this it seems to be the first page only on our issue, we are printing 8.5x18 and it just recognizes the document as 8.5x11, works fine from reader 8.x

  • Any known issues with SQL DB Link Synonyms joining on encrypted columns

    Are there any known issues with accessing encrypted columns via a database link that is masked by a synonym?
    We are experiencing unexpected results when the encrypted column is anti-joined through a not exists, to a local encrypted column of the same datatype The encrypted columns are person ids. If the expected person id is hard coded, the results return correctly. The local database is 10.2.0.4.0 and the link is to a 10.2.0.3.0 RAC.
    Both enrollments and person_ids, below, are synonyms to the linked tables.
    ... From table_1 d
    where ...
    AND NOT EXISTS (SELECT 1
    FROM enrollments x,
    person_ids p
    WHERE x.person_demo = p.person_demo
    AND x.rept_inst = d.rept_inst
    AND x.demo_time_frame = d.term_deg_grant
    AND p.person_id_encrypted = '999999999')
    vs.
    ... From table_1 d
    where ...
    AND NOT EXISTS (SELECT 1
    FROM enrollments x,
    person_ids p
    WHERE x.person_demo = p.person_demo
    AND x.rept_inst = d.rept_inst
    AND x.demo_time_frame = d.term_deg_grant
    AND p.person_id_encrypted = d.person_id_encrypted)

    milazzo74 wrote:
    I am having the same problem...
    http://www.milazzo.com.br/teste/projetos.php
    It works fine in Firefox but loads forever in explorer 8...
    The cause of the problem is not the same.
    In your case it takes forever to load the thumbnails from flickr.com; the SpryDataSets without the loading of the thumbnails works as expected.
    Remember that ALL of the thumbnails for each 60 odd projects are downloaded from flickr, that is about 1800 thumbnails.
    Gramps

  • Newly created vLAN in VTP Domain issue with VTP Client

    Hello,
    I have a VTP Domain with WS-c4506 switch "server" and multiple c2950 "clients" along Microsoft DHCP server.
    I have this infrastructure 5 years ago up & running without any problems but nowadays we need to add a new vLAN wireless access points i already created the vlan on the server checked it is created on clients show vlan found the new vlan.
    I
    assigned fa port to it on the core switch "server" i have the access point connected to it have some problems obtaining IP Address but it got fixed by restarting the DHCP server.
    problem with VTP clients that when i try to assign port to the new vlan it always takes APIPA and even when i give the laptop connected directly to the port static IP address with the same range of the new vlan at acts like there is now networks exist it cannot ping anything within the network.
    it all looks right but i dont know why it doesnt connect to the network like it should.
    any recommendations?

    Yes. I can Telnet over the site to site tunnel to the Cisco 881. I can not Telnet via the VPN Client to the Cisco 881 or ping it's LAN interface.
    GM

  • Issue with production order linked to quote instead of sales order

    Hi Gurus,
    I did a lot of digging through SAP notes and accross the internet. Before I contact SAP, just wanted to give a shot @ SDN. Please help.
    Background- for ATO (VC assemble to Order):
    i) Created a quote
    ii) Created a sales order with reference to a quote
    iii) MRP created a planned order and the planned order is linked to the quote
    iV) Production order created and it is also linked to a quote
    v) All reports, MD04/COOIS shows that the plnd order/prd order is linked to the quote
    My issue - print a shop paper or a customer specific product ID label....guess what 'it prints the quote number everywhere'.
    Everything is tied to a quote - which is not a real demand. All purchase orders are tied to the quote. THIS IS STUPID.
    I refered to SAP Notes - 181685 and 459734. But I need details of what config settings I should do and where?
    I'm a pure PP guy, getting into SD requirement type & account assignement settings. Please help me with details.
    http://scn.sap.com/message/8018953#8018953
    This guy also had the same problem and his issue was never resolved.
    Thanks,

    Hello
    Take a look on the following note where this scenario is described:
    16658 - Generate sales order stock based on quotation
    The note proposes the following setting as a workaround to this issue:
    "As of 3.0, when the requirements type is assigned to the transaction
    during requirements type determination, it is possible to assign a
    requirements type to the quotation that does not represent make-to-order
    production."
    Therefore, please check your customizing settings and make sure that a requirement class/type (transactions OVZG and OVZI) without MTO is assigned to the quotation item category (transaction OVZI).
    On transaction OVZI, there is a field called "Origin of requirement type in requirement type determination". Please take a look on the information provided on the F1 help of this field:
    ========================================================================
    Origin of requirement type in requirement type determination
    In the standard release, the requirements type is determined according
    to a certain search strategy depending on the strategy group of the
    material.
    In this field you can select an alternative search strategy (source):
    Source 0 = Material master strategy, then item category and MRP type
    Source 1 = Item type and MRP type strategy
    Source 2 = Item type and MRP type strategy (as for source 1) with
    additional check of the allowed requirements type
    ========================================================================
    Therefore, my suggestion is to set this field to 1 for the quotation item category and assign an MTS requirement type on OVZI.
    BR
    Caetano

  • Issue with embedded website links in emails

    Hello all,
    First time on this forum and hopefully someone can help me with this issue, which popped up in the last few weeks.  Whenever there is a link in the emails that I received, the link is only underlined and highlighted up to about 30 or so characters and when I click on it, it will open another window but the address is only the portion of the link that is highlighted, therefore, it always comes back with an error.  I have been getting around this issue but manually highlighting the entire link address in the email and then copy and paste it in a new window to get to the site that I wanted.  This is getting annoying and I don't know why it happened suddenly and how to fix it. 
    Thanks,
    Peter Lau

    Peterlau,
                   Im sorry to hear about you link problem. In order for me to resaerch this for you I need some additional information. Please fill out the secure form http://www22.verizon.com/onecms/verizonsupport?ID=peterlau  . Make sure to also include an example of a link you were emailed, how you access your email (website, outlook, etc) , as well .
    Anthony_VZ
    **If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
    Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

  • TS2755 Does anyone have an issue with sending youtube links via text message with ios7?

    I recently downloaded IOS 7 on my iphone 5. I cannot forward youtube links via text message. Does anyone have the same issue?

    Found the issue. It seems that IMessages requires area code as well for local phone numbers. I never had the area code for local phone numbers with IOS 5 and IOS 6. It always worked before.

  • GetElementById issue with hidden command link

    I am having scrollable table whose rows are not editable. This table is in first half of screen. The bottom half of screen displays detail with respect to each row. So say i click on row 1 the bottom screen gets refreshed with details of row1.
    When i am clicking a row i am getting javascript error "object expected". Can anyone help me out...i am putting my piece of code below...
    <script>
    func A()
    document.form1.offerid.value = val;
    clickLink('hiddenLink');
    function clickLink(linkId)
    var fireOnThis = document.getElementById(linkId)
    fireOnThis.click()
    </script>
    <h:form id="form1">
    <input type="hidden" name="offerid" />
    <t:commandLink id="hiddenLink" forceId="true" style="display:none; visibility: hidden;" action="#{TestBean.openClickOffer}"/>
    </h:form>

    I have tried using fireOnThis.click() but it gave object expected error. The line in generated code where it is giving this error is ....
    <a href="# onclick="clear_form1();document.forms['form1'.elements['autoScroll'].value=getScrolling();document.forms['form1'].elements['form1:_link_hidden_'].value='hiddenLink';if(document.forms['form1'].onsubmit){var result=document.forms['form1'].onsubmit(); if( (typeof result == 'undefined') || result ) {document.forms['form1'].submit();}}else{document.forms['form1'].submit();}return false;" id="hiddenLink" style="display:none; visibility: hidden;"></a>
    I suspect somehow getElementById(linkId) is not recognising the anchor tag event id ie linkId.....

  • Premiere Pro CS6 issue with AME/Dynamic Link

    Hello,
    I'm having a quite frustrating problem with Premiere PRO CS6. Let me tell you my configuration first:
    Intel i7 860, 8Gb Ram, 2x1Tb HD in Raid 0, GeForce GTX570 Ti 2Gb DDR5, Windows 7 Ultimate 64 bit, Adobe Creative Cloud subscription.
    When I try to put in the AME's queue any Premiere's composition, I can see the window saying "Exporting...." but then nothing happens. AME doesn't start or, if it's already open, it doesn't receive anything on the queue.
    I've tried to import the timeline's directly from AME, but it doesn't work either.
    It has been a few days I'm fighting with this problem and I already have done this:
    1) Uninstall/Clean Install all the software inside the Creative Cloud subscription and all updates applied.
    2) clean any preset both in Premiere and AME by keeping down Alt+Shift when starting the applications.
    3) disable/enable antivirus software (Microsoft Security Essentials) and firewall (default windows 7 firewall).
    4) disable/enable the CUDA Mercury engine.
    None of this solved the problem.
    However I've noticed that each time I try to send something from Premiere to AME appears a general error in notifications saying just "invalid menu operation".
    Since, as I've said, I tried also a clean installation, right now I'm really out of options and I would really appreciate any suggestion how to fix this problem. Thanks.
    Martin

    That has solved a few annoying Dynamic Link problems for me.
    As a point of interest, the connection between Premiere Pro and AME isn't a Dynamic Link.  It's more of a 'static' link.  The point of a Dynamic Link is that any changes made in the original program will show up in the secondary program.  That does not happen here.  The sequence is 'saved' from PP as it is at the time the export is started and AME works off of that saved sequence.  Changes made after that do not show up in AME automatically.
    So whatever the error, it is not related to Dynamic Link.

  • I am increasingly having issues with clicking on links and not going anywhere with Firefox. When I paste the path into Internet Explorer it often works. Why?

    I have always preferred Firefox, but am getting quite annoyed when I click on Google links and don't get to the site. I thought maybe the sites were down, but then started pasting into IE and actually getting something. For example, today I clicked on a link from Harry and David to redeem a free magazine subscription to Food & Wine. I tried it multiple times, then tried it with IE and it worked right away. I don't know if it is just the latest version of Firefox, this seems to have been happening more and more for a while.

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do not click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    Do a malware check with some malware scanning programs on the Windows computer.<br />
    You need to scan with all programs because each program detects different malware.<br />
    Make sure that you update each program to get the latest version of their databases before doing a scan.
    *http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    *http://www.superantispyware.com/ - SuperAntispyware
    *http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
    *http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    *http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    You can also do a check for a rootkit infection with TDSSKiller.
    *http://support.kaspersky.com/viruses/solutions?qid=208280684
    See also:
    *"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Maybe you are looking for