VLAN Tagging from Windows on UCS B200m Server

We have two B200m blades that we have installed with Windows 2008 R2 and need to determine if the current driver set available for the MK81R/MK82R for Windows 2008 R2 supports VLAN tagging from inside of Windows. If anyone could point me in the right direction I would surely appreciate it!

Windows has never been a great OS for trunking multiple VLANs. The best way to set an individual adapter to a certain VLAN is to set it as the Native VLAN on the UCSM side. The order of the vNICs seen in the UCSM and the order that windows sees them is not always the same so match them up by MAC address, then set the Native VLAN to the correct one on the vNIC within the UCSM and you should be all set within Windows.
Drivers can be found on the Cisco.com Support page, under
Downloads Home
Products
Unified Computing and Servers
Cisco UCS B-Series Blade Server Software
Unified Computing System (UCS) Drivers

Similar Messages

HT2518 I don't have .psd files but how do I migrate my Photoshop Elements catalog with tags from Windows

I don't have .psd files but how do I migrate my Photoshop Elements catalog with tags from Windows?

That's really disappointing, I purchased the download version.
I refuse to pay another £55
Thanks for your help anyway

Migrating from MCS7845 to UCS C210M2 Server for CUCM8.0

Customer Alpha has CUCM and Nortel.
(I.) Following is the CUCM Cluster breakup:
   - Location X: PUB, SUB1, SUB2
   - Location Y: SUB3
   - Location Z: SUB4, SUB5
(II.) Location Z, Block-A has 10,000 users on Nortel which need to be moved to CUCM8.0 for which the following two new SUBSCRIBER's added to the existing CUCM Cluster:
    - SUB6, SUB7
    - SUB6 & SUB7 will be installed on a UCS C210M2 server
    - Customer will be shipped with two UCS C210M2 with dual quad core 5640 processor
2.In Location Z, currently SUB4 and SUB5 are on MCS 7845 server.
Need to Migrate SUB4 and SUB5 on UCS C210M2 Server from MCS7845.
This way, Location Z with SUBSCRIBERS(SUB4, SUB5, SUB6 and SUB7) will migrate to UCS C210M2 server platform.
Rest of the locations namely- LocationsX & LocationY will continue running on MCS7845 platform.
Need to understand the Migration strategy (point wise) keeping in mind, the PUB is in LocationX still on MCS and only the SUB- SUB4, SUB5, SUB6 and SUB7 will be on UCS platform in locationZ.
Please share the steps required to perform this type of Migration.
Thanks & Regards
Sumit

Hi Gajanan,
Thanks for your prompt reply.
SUB4 Migration from MCS7845 to UCS C210M2 server involves the following steps:
Take SUB4 out of the Network.
Install SUB4 on UCS C210-M2 server, just as a fresh install and ensure the same SUB4 name is assigned on UCS what its there on the MCS7845 platform.
While installation of SUB4, it ask for PUB details like IP Address, assign the reqd. details.
Migrate the users assigned to SUB4 with SUB5 for the time being, this step should have been performed in the beginning.
Once the installation is complete, you can re-install the users from SUB5 to SUB4.
Database replication will take place from PUB
Please confirm if Step4 is required or when we take the Backup using DRS of SUB4 and after the installation of SUB4 on UCS C210, restore the backup on SUB4 and then it would populate the users/phones that were tregistered with SUB4 on MCS 7845 platform on to UCS C210M2 platform.
Do we need to take DRS of the PUB or SUB4?
Can you please put the steps in the correct order.....
Follow the same steps fro SUB5 Migration from MCS7845 to UCS C210M2 server platform.
Thanks & Regards
Sumit

Installing Printers from Windows 2008 R2 printer server using the Cname

Am having issues installing printers on workstations from the windows 2008 R2 print server using the DNS names. the servername and Full qualified Name works fine.
l have tweaked the Registry and Disabled the StrictNameChecking but still getting an error. this is the message am getting...
Printer Installation Failed
You do not have enough privilege to complete the printer installation on the local machine.
I found this KB and did exactly what is in the KB but stilll....
lhttp://support.microsoft.com/kb/870911/en-us
need help

Hi.
I think I solved this yesterday. We got 1 printserver, with an alias, which we had this problem to connect to. I noticed that there is a difference between x86 and 64bits system entries in the registry...
When you are having a 64bit system, you must use REG_QWORD instead of REG_DWORD, REG_DWORD is only to be used in x86 system! See below.
Windows 2008 server R2 64-bit
HKLM\SYSTEM\CurrentControlSet\Control\Print
= ”DnsOnWire” = REG_QWORD Decimal = 1
(reg add hklm\system\currentcontrolset\control\print /v DnsOnWire /t REG_QWORD /d 1)
HKLM\SYSTEM\CurrentControlSet\services\LanmanServer\Parameters
= DisableStrictNameChecking = REG_QWORD Decimal = 1
(reg add hklm\system\currentcontrolset\services\lanmanserver\parameters /v DisableStrictNameChecking /t REG_QWORD /d 1)
HKLM\SYSTEM\CurrentControlSet\services\LanmanServer\Parameters\
REG_SZ = OptionalNames = “aliasname” (C-name record in DNS)
(reg add hklm\system\currentcontrolset\services\lanmanserver\parameters /v OptionalNames /t REG_SZ)
Windows 2008 server x86
HKLM\SYSTEM\CurrentControlSet\Control\Print = "DnsOnWire" = REG_DWORD Decimal = 1
(reg add hklm\system\currentcontrolset\control\print /v DnsOnWire /t REG_DWORD /d 1)
HKLM\SYSTEM\CurrentControlSet\services\Lanmanserver\Parameters = DisableStrictNameChecking = REG_DWORD Decimal = 1
(reg add hklm\system\currentcontrolset\services\lanmanserver\parameters /v DisableStrictNameChecking /t REG_DWORD /d 1)
HKLM\SYSTEM\CurrentControlSet\services\LanManServer\Parameters\ REG_SZ = OptionalNames = “aliasname”
(C-name record in DNS)
(reg add hklm\system\currentcontrolset\services\lanmanserver\parameters /v OptionalNames /t REG_SZ)
Don't forget to reboot your system after these changes!
Best Regards, Mats

Import People tags from Windows Live Photo Gallery

I've used Windows Live Photo Gallery for years and have over 15k images that have people tags embedded in the metadata for the files. I recently downloaded the Photoshop Elements 13 trial and am trying to determine if the organizer that ships with it will meet my needs, however, I am not seeing a way to import People tags from my existing images. I have imported the images, and most of the photo tags appear to have been imported, but not the people tags. Is there any built-in way to import people tags from the file-based EXIF metadata, or an external tool or add-in that might be able to bring my WLPG People Tags into PE13?
Thanks!

Adding a 'Me too' to bump this up. Doing the '30 day evaluation' as I'm looking to change only because MSFT has abandoned the product and I some better editing on things like 'healing/clone brush' for the picture's I scan (using the very old Digital Image Pro). Google's Picasa has no problem recognizing them including the location of the face selection (though it does like to recognize over top of them sometimes).
I can deal with some of the amazingly frustrating clunkiness of the UI and navigation (they seriously need to hire some new usability designers) but it is a show stopper if the People aspect won't recognize existing tags from WLG and/or Picasa.

[solved]printing from Windows 7 to ArchLinux server.

I have read https://wiki.archlinux.org/index.php/CU … er_sharing
but cannot recognizing my printer from Windows 7 machine. I have added the workgroup in smb.conf but i don't know if should i put the password and where, i can go from w7 to archLinuxhost:631 and send a test page to print, but i cannot add to w7 the printer.
Last edited by fpilee (2012-11-14 13:09:01)

solved follow the steps from https://wiki.archlinux.org/index.php/CU … er_sharing
then go to localhost:631 and share the printer,
next go to the w7 machine and browse in the navigator archLinuxMachineIP:631 and copy the URL for the printer in printers tabs,
then add on w7 this url and select the driver.
you have to add a address reservation in your router to the machine with the printer,
Last edited by fpilee (2012-11-14 13:11:17)

Source path too long :-Unable to delete mutiple number of folder and files from windows 2008 R2 file server

Hi Team,
we have a file server on windows server 2008 R2, I have copied some data from one server to another server using robocopy . I have checked access permission it seems okay no issues with access permission. but when i am trying to delete these folder i am
getting below error message
Error message:-
The source file name are larger than is supported by the file system.try moving to a location which has a shorter path name or try renaming to shortcut names before attempting this operations
Regards,
Triyambak
Regards, Triyambak

I have tried everything , but nothing help , getting same error
could any one help me regarding this.
Regards, Triyambak
I have not looked at the other thread mentioned, but usually when this ends up happening, There are several ways to go about it. One is to map a drive to the UNC path deeper into the folder structure.
So instead of C:\long\path\that\we\dont\want\files\in
You map a drive.. lets say M:\ to \\computer\c$\long\path\that\we\dont\want
Now, when you open Explorer to M:\ you've elimintated the length of the path down to M:\files\in which is completely usable.
The other way, is to shorten the names of everything. For example...
Folder structure like this:
Root
-----Folder1
-----Folder2
--------------Folder2A
-----Folder3
--------------Folder3A
Rename all the folders to shorten up the path. Rename Folder1 to '1' Rename Folder2 to '2', Rename folder3 to '3. Then try to delete. If it's still too long, go one folder deeper. Rename Folder2A to '1' and
Rename Folder3A to '1' and so on. Basically keep renaming everything to a single digit character and eventually you'll shrink the path down to where you can shift-delete everything remaining.
Hope that helps.
Brian / ChevyNovaLN

Bacpac import from Windows Azure into sql server 2012 fails

Very sorry if this is posted in the wrong froum I was not sure where to post
I am trying to verify a bacpac file I downloaded from my windows azure sql instance and I am getting this error when trying to Import into SQl server express 2012. SQL server 2008r2 is also installed on this machine. How can I fix this?
Count not load schema model from package. (Microsoft.SqlServer.Dac)
Program Location:
   at Microsoft.SqlServer.Dac.DacPackage.LoadModel(IPackageSource packageSource)
   at Microsoft.SqlServer.Dac.Extensions.DacExtensions.GetCollationString(IPackageSource packageSource)
   at Microsoft.SqlServer.Dac.Extensions.DacExtensions.GetCollationString(BacPackage package)
   at Microsoft.SqlServer.Management.Dac.DacWizard.CreateDatabaseOnTargetWorkItem.DoWork()
   at Microsoft.SqlServer.Management.TaskForms.SimpleWorkItem.Run()
===================================
Internal Error. The internal target platform type SqlAzureDatabaseSchemaProvider does not support schema file version '2.5'. (File: G:\Fbasic8-2014-2-2-12-10.bacpac) (Microsoft.Data.Tools.Schema.Sql)
Program Location:
   at Microsoft.Data.Tools.Schema.SchemaModel.DataSchemaModel.UpgradeSchema(ExtensionManager em, String originalSchemaVersion, XmlReader originalSchemaReader, String source)
   at Microsoft.Data.Tools.Schema.SchemaModel.DataSchemaModel.DeserializeXml(TextReader input, ErrorManager errors, String source, Action`3 constructorParametersSetter)
   at Microsoft.Data.Tools.Schema.SchemaModel.DataSchemaModel.DeserializePackage(SqlPackage package, ErrorManager errors, Action`3 constructorParametersSetter)
   at Microsoft.SqlServer.Dac.DacPackage.LoadModel(IPackageSource packageSource)
Jon Stroh

Hello,
Just as Mike post above, the issue may occurs as the previous SSDT releases are not compatible with this new version of DACFX.
You can refer to the following blog about this issue and download the latest release of SSDT from
here.
Reference:http://blogs.msdn.com/b/ssdt/archive/2012/10/10/ssdt-amp-dacfx-october-2012-compatibility-notes.aspx
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Active Directory logins from Windows to Final Cut Server

While I did manage to solve my main problem with Integrating AD with Final Cut Server at this one site.... It turns out that there a typo in the kerberos config file. Ooops. Now logins in from Mac OS using AD credentials works well. Unfortunately, I am still seeing some minor issues, like certain groups in AD not being able to login, and for some reason the Windows users can't login (only the Macs using AD credentials). Any seeing anything like this? Of course I enabled certain groups in Final Cut Server pref pane to match certain AD groups, but in the end only the BuiltIn groups worked, not the Domain Users, Domain Admin groups. Strange. And not sure why Windows users can't login. Same domain. Fun times.

It seems like I read the inital Kb article wrong. The Windows clients get the krb5.ini file, not the Domain Controller. LOL. Thanks to drew for pointing that out to me.
http://support.apple.com/kb/HT3688
In order for Active Directory bound Windows Final Cut Server client systems to successfully authenticate to Final Cut Server, you must create a custom Kerberos configuration file on the Windows client system.

Windows 2012 Activation from Windows 2008 R2 KMS server

Hello,
We have 2 KMS servers in our Domain. One has server has KMS key for Windows 2012 KMS installed and other not.
I have joined first windows 2012 server to domain and its been 3 hours the server is still not activated from KMS server.
When client contacts KMS server for Windows 2012 licnese, if key is not installed on first KMS server, will it automatically contact second one? Do I need to change sonmething?
One more question:
Is it possible to have Windows 2012 key installed on the same KMS server, which is already acting as KMS sertver for Windows 2008R2? and Windows 2003 R2? or wil this cause any issues?
Mahi

Hello,
Once a KMS host is activated, it will publish it's record to DNS. KMS clients attempting to activate will query DNS to get a KMS host, if there is more than one, they will use the first one they get. The DNS server should be rotating which records
it hands out.
If they activate, they will cache that record and attempt to use it when they renew, if they fail to renew or activate, they will query DNS for the KMS host again.
Since this is a new KMS host it will need at least 5 KMS clients to contact it meet the count needs for Server.
What version of Windows is the other KMS host machine is it Windows Server 2008, Windows Server 2008 R2 or is it Windows Server 2003 R2?
Thanks, Darrell Gorter [MSFT] This posting is provided "AS IS" with no warranties, and confers no rights.

Printers deleting themselves from Windows 2008 R2 Print Server

We have a server that is seemingly randomly deleting the print objects from the server itself. When we look at the Print server console, we see that all the installed/shared printers are "Error - Deleting". If we clear the jobs in the queue, the
printer deletes itself. Stopping and restarting the spooler service doesn't help, rebooting the server hasn't helped.
We had this issue 2 weeks ago on the same server. We just recreated the printers and it's been fine until yesterday, then they all started deleting themselves. There doesn't appear to be anything in
any log we can find to point to a reason for this. We've even checked the login logs and it's only been 3 admins that have logged in to that server in the last 2 weeks. 1st time to rebuild the printers 2 weeks ago, and yesterday because the printers started
disappearing.
Anyone have some clues?

Hi Paul,
it is really interesting case.. I would start with checking event viewer under Applications and services Logs > Microsoft > Windows > PrintService > Admin and Operational (you have to enable second one first)
Any scheduled tasks? Group policies? system restore?
The only thing in the logs is that it is shifting the default printer when one of us logs into the server, using RDP by the way. There are no scheduled tasks, group policies or system restore being used.

Migrating BO from Windows 2000 to 2003 Server

Post Author: Eric Van Steenbergen
CA Forum: Older Products
Hello,We're planning migration of our Windows 2000 Server to a Windows 2003 Server. Can anyone advice how to proceed regarding following issues:- repository is running on different server than that on which BO is installed.- authentication is still running on the server where repository was installed at first (later moved to current server).To make it clearer:Server1 = applicationServer2 = repository (authentication)Server3 = database (universe)With migration to the new server (server2 will be replaced) we'll have to change the authentication to point to the database server (universe). What do we have to change at the application level on server1?Any advice is greatly appreciated.Kind regards, Eric Van SteenbergenBTC [email protected]

FRM-40039 is a Forms error, and Forms doesnt use ODBC. You'll probably get better help posting in the forum appropriate for that product. Unfortunately I'm not sure exactly what the forum is :(
Greg

Moving .csv file from windows(client) to linux server

Hi All,
I have a .csv file in "D:\Datafiles\Test.csv". I need to move this file to server top "$XXLS_TOP/admin/import/US/" using shell scripting.
Server : XYZ
Login : test_user
Password : password
Can anyone help me on this.I am new to shell scripting..
thanks

Hi,
As already mentioned above, you have 2 major options:
1.samba (lots of docs on the net)
2. ftp (even more docs on the net)
If you decide to use ftp, then here's a starting point:
-install ftp server on your Win machine-
-you can use lftp , which has the ability to read a set of commands from a file
For instance:
[kido@kido ~]$ pwd
/home/kido
[kido@kido ~]$ ls
cacti_backup.tar.gz                    Desktop     ftp       j2re-1_4_1_02-solaris-sparc.sh out   test
cacti_data_query_ucdnet_device_io.xml diskio.tar help.txt net-snmp_devio.xml              perl
[kido@kido ~]$ cd ftp
[kido@kido ftp]$ ls
ftpscript
[kido@kido ftp]$ cat ftpscript
open localhost -u kido,123kido$
ls
get help.txt
bye
[kido@kido ftp]$ lftp -f ftpscript
drwxrwxrwx    2 501      501          4096 Feb 25 2009 Desktop
-rw-r--r--    1 501      501      13137873 Mar 30 19:54 cacti_backup.tar.gz
-rw-rw-r--    1 500      500         34216 Feb 03 2007 cacti_data_query_ucdnet_device_io.xml
-rw-r--r--    1 501      501          4950 Apr 07 08:46 diskio.tar
drwxrwxr-x    2 501      501          4096 Sep 08 15:53 ftp
-rw-rw-r--    1 501      501           144 Jul 30 19:27 help.txt
-rw-r--r--    1 501      501      23023830 May 27 14:17 j2re-1_4_1_02-solaris-sparc.sh
-rw-rw-r--    1 500      500          2568 Aug 18 2005 net-snmp_devio.xml
-rw-rw-r--    1 501      501          8093 Aug 05 15:21 out
drwxrwxr-x    2 501      501          4096 Jun 16 15:38 perl
drwxrwxr-x    2 501      501          4096 Sep 02 13:10 test
[kido@kido ftp]$ ls
ftpscript help.txt
[kido@kido ftp]$ You can modify ftpscript and put any commands you need. Then you can run "lftp -f ftpscript" from cron (for instance). For more details: man lftp.
kido

How to import people tags from Windows Live Photo Gallery to Lightroom?

I know, that this is rather WLPG issue than Lightroom, but maybe someone has had the similar problem. I have used WLPG for sorting and viewing my photos, but now I am starting to use Lightroom. I have used automatic face recognition for tagging people. I know, that there is no such a feature in Lightroom, but the first question would be: how to utilize the existing people taggings? They are embedded to the image, but so far only WLPG is able to use the data. It would be enough for me, if those "people tags" would be automatically used as "normal tags" in Lightroom (i.e. without coordinate information). Any solutions? Of course the face recognition plug-in would be optimal solution

I know that very well, like you said it did not need much googling. But my question was, if someone has e.g. ready-made plugin for that. Of course I could e.g. let WLPG find the faces and then tag those manually with rather small effort. But it would be nice, if that was done automatically. Like your answer sais, the tagged information is stored to the file, but in non-standard way. It is not rocket science to extract that information and do standard tagging with some plugin. But my coding skills are not enough - not even close. So the original question is still valid.
Once more: I can do it manually, but can I make it more automatically. Well, I need to check clvrmnky's answer more carefully.

Installing OVM X86 3.1.1 with Trunk VLAN tag for ovm management network

Hi Guys
Can anyone help with network config on the OVM server 3.1.1 basically we need to use vlan tags on trunk port... so i have a subnet from following *(Trunk Allowed VLAN XXX)* from which i need to allocate IP for the OVM server component so that the ovm manager can find the OVM server instance...
Can you use vlan tags, on trunk port with OVM server 3.1.1???
Thanks

Your right there as i later found out the engineers weren't selecting the vlan option when installing the vm server...

VLAN Tagging from Windows on UCS B200m Server

Similar Messages

Maybe you are looking for