VLANs lost when moving from transparent to client VTP mode ?

Hello,
We are not 100% sure of our VTP password. We have a VTP server (CAT) with vlans 1-10, and somewhere a switch (DOG) that is configured for VTP transparent, with vlans 12 and 13 locally configured. We want to configure DOG in VTP client mode, without any operational downtime. What will happen if we configure DOG with a wrong VTP password. Will it lose vlan 12 and 13, or will it still keep them ?
thanks a lot Karien

Both the posts before this are accurate in their information.
I'll just try and break it down for you:
Simple answer to your question: It will keep the vlan information if the passwords dont match.
Vlan information WILL be overwritten on the switch if it receives a a VTP update that:
* succeeds the authentication
* has a config register higher than the one it is on
Ofcouse, this 'update' could be from a VTP client or a server but NOT from a vtp transparent switch. (it will never send out the update in the first place).

Similar Messages

  • Emails lost when moved from inbox to 'on my mac' after Mavericks upgrade

    Hi, upgraded my MBP to Mavericks at the end of October. Everything seemed with the mail app at the time. A couple of days after i noticed that mails that appeared in the inbox that weren't cleared in that same session that they appeared would only show the subject line and nothing in the in box.  When i tried to move it to 'on my mac' i would get an error indicating that 'it could not be moved the mailbox on my mac.' Read around discovered that doing a 'mailbox rebuild' would fix that. Then i started to notice that nothing appears in the 'on my mac' mail folders after the date of the upgrade. When i drag and drop from the inbox to the follder, the mail seems to move. But when search in the folder for it, its gone. And of course its gone from the inbox since imoved it. I only use the mail app to check my icloud email. No gmail.
    Where have all my mails gone? Any one else seen this and know how to fix it?
    Thanks

    Please let me know if you find a solution, I should not have trusted Apple and stayed with my old operating system, but now too late!

  • Files lost when moving from HD to external HD

    I understand that this is a bug (http://www.macintouch.com/leopard/movebug.html) that effects Leopard but it has happened to me using tiger.
    I have run Data Rescue2 and it has recovered many files but none of the 200 or so that I lost.
    Does anyone have an idea what I could do next?
    I'm a complete layman, all the above was suggested to me by someone more knowledgeable. So please, if you do have a answer, explain it simply.
    Thank you very much in advance.

    I have run Data Rescue2 and it has recovered many files but none of the 200 or so that I lost.
    Then the space those files took up on the HD were written over. DR2 is very good, especially if you used the Thorough Scan, if it can't find them then we're talking really big bucks & resources to recover them... if at all.
    What happens is that once those files are no longer in the Trash, the OS gets to use those Sectors to write New or temp files to, and just booting up off the same drive can overwrite the Freed Space.

  • Iphone5 - lost my contacts when moving from BT Yahoo to BT Mail. I do not back up to iCloud and I did not use my mail account for contacts.  Can anyone help to find and restore my contacts?

    IPhone5. I have lost my contacts when moving from BT Yahoo to BT Mail. I do not backup to iCloud and do not use my mail account to store contacts.  Can anyone help find the contacts on my phone and restore them?

    Contacts are designed to be synced to a supported application on the computer or a cloud service like Gmail, iCloud, or an Exchange server.
    Have you failed to use the device as designed?

  • DATAGRID FOCUS ISSUE: Focus got lost, while moving from one cell to another cell using tab key.

    Problem: Focus got lost, while moving from one cell to another cell using tab key.
    Example: In an AdvanceDataGrid, there are three columns having custom ItemRenderer with Spark TextInput control (editable=true & focusEnabled=true).
    When I try to move the focus in with in 2nd, 3rd & 4th column using tab key, focus got lost. Most of the time it’s working, but some time it doesn’t work. There’s no clue as to how may rows/columns the focus has jumped to; or whether the focus has gone out of the data grid altogether.
    Observations: I am not sure whether this problem is because of custom component implementation or it is because of some issue related to Flex Component.
    It only occurs when we perform some actions like some server call, some complex logic execution etc. at the focus out event of itemrenderer.
    There is one property of datagrid i.e. editedItemPosition which contains row & column index of datagrid. On the focus out event, it gets null when focus got lost. We tried to set it, but it didn’t work.
    Steps Performed:-
    1. Currently focus is in 2nd column i.e. Apply to #.
    2. Once I press tab key from 2nd column, it goes to 3rd column which is correct.
    3. Now if I press tab key from 2nd column i.e. Payment #, focus should go to 3rd column, but it goes out of data grid and set the focus of button which is outside data grid.

    http://search.java.sun.com/search/java/index.jsp?qp=&nh=10&qt=%2Bjtable+%2Btab+%2B%22enter+key%22&col=javaforums

  • I have an iPad 2 and receive e-mail through internet connection. When I delete e-mails, and clear my Trash folder, they re-appear. Setting are for remove from server when moved from Inbox. Any idea what I can do to actually delete them?

    I have an iPad 2 and receive e-mail through regular internet connection. Lately, when I delete e-mails, and clear my Trash folder, they re-appear, downloaded anew from the server and marked as unread. My e-mail Advanced Settings are selected for "Remove from server when moved from Inbox." Even when I access the e-mail accountfrom my desktop and delete the e-mails, the re-appear on my iPad. Does anyone have any idea what is causing this and what I can do to actually delete them?

    Sounds like you are looking in the wrong Administrative Group container which is why you are seeing your Exchange 2010 servers in there.
    When you install Exchange 2003 only you will see a container named by default as "CN=First Administrative Group" container. But this could be named anything if you changed the Organization Name on the installation when you installed the first
    Exchange 2003 server into the domain/forest. 
    You will notice that when you install Exchange 2010 part of the AD setup is to create a new configuration container and is named by default "CN=First Administrative Group (FYDIBOHF23SPDLT)".
    So it sounds like you are not looking in the right location within ADSIEdit. 
    You may find the following article also helpful for this issue which is the same resolution:
    http://blogs.technet.com/b/sbs/archive/2012/05/17/empty-cn-servers-container-causing-issues-with-public-folders-on-small-business-server-2011.aspx
    I recommend though that you ensure your Exchange 2003 servers are fully uninstalled or no longer present in your environment before you go deleting the Servers container though.. The following Microsoft article will help with this:
    http://technet.microsoft.com/en-gb/library/gg576862(v=exchg.141).aspx

  • What should I do to setup a new MacBook pro for first time when moving from a PC?

    What should I do to setup a new MacBook pro for first time when moving from a PC?

    you have to use the migration assistant if you want your files transfered from your pc to mac this link will be helpful
    http://support.apple.com/kb/HT4796

  • Can you keep your playlist when moving from computer running xp to computer running vista.          v

    can you keep your playlist when moving from computer running xp to computer running vista as i keep losing my playlists when using computer with vista running on it.ipod touch 3rd gen set up originally on computer running xp.thanks.

    This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
    You can find the Commercial Laserjet board here:
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • When moving from a list of threads view to a thread would be nice to jump to last thread read.

    When moving from a list of threads being viewed to a thread, it would be nice to jump to last thread read or first unread thread.
    Sometimes the threads get rather long.  Sometimes I haven't read a thread in awhile & I forget where I have left off reading a thread. It would be nice to have an icon to click on to move to your last read post or the first non-read post. 
    Seems this could be implemented in javascript without too much problem.  Might be a problem of when to get rid of the tracking data.
    Robert

    This would be a new capability.   I didn't know you could jump directly to the last post in a thread by clicking on the posters name in your discussions.  However, I am interested in jumping to the first post that I haven't read.
    Since writing my original post, I realize that software doesn't know what posts I have read. Lets say there are are 26 posts in a thread.  Lets assume these are divided into three pages with at most 10 items in a page:
    page 1 -- a, b, c, d, e, f, g, h, i, j
    page 2 -- k, l, m, n, o, p, q, r, s, t
    page 3 -- u, v, w, x, y, z
    The software know that I have viewed the first three pages.  It doesn't know what post on the pages I have read.  The software would need to assume I have read all the available posts on a page.
    Now lets assume that 12 more post were added.  This results in:
    page 1 -- a, b, c, d, e, f, g, h, i, j
    page 2 -- k, l, m, n, o, p, q, r, s, t
    page 3 -- u, v, w, x, y, z, aa,bb,cc,dd
    page 4 -- ee,ff,gg,hh,ii,jj,kk,ll
    It would be nice if I could go to aa. 
    Jumping to the last post in the thread doesn't hack it. You have to spend a lot of time finding where you left off your reading.
    Intesting, the list of your posts on your homepage usings the term Last Activity were as Your Discussions uses the term Last Post. The terminalogy should be the same & should act the same.  For the existing capability of going the the last post, I was thinking of Goto Last Post.

  • Performance issue when moving from 4.6c to 6.0

    Looks like we took a performance hit when moving from 4.6c to 6.0 on the same hardware. 
    For example, our PGI on outbound deliveries now takes several seconds longer in 6.0 then it did in 4.6c.  We've noticed other SAP area's are taking longer as well.  With an ST05 sql trace on the PGI in 6.0, we see more tables being accessed, same tables being access differently taking longer.  All leading to more time to do a PGI in 6.0.
    Has anyone else noticed this increase in Response time when upgrading to 6.0 ?   
    Thanks,
    David

    Hello.
    Yes, in our system we noticed the same thing at start. The general performance seemed to get worse after upgrading. In fact, database became bigger and more memory is consumed. However, it was tuned up by our system administrator and now seems ok.
    Run the optimizer statistics and see if it get's better.
    Regards.
    Valter Oliveira.

  • When moving from one master block to detail block  it must save record.

    when moving from master block to detail block it must save record or it will give message like 'save changes '....
    when i write it ,but this message will be coming.
    But if i save record message will appear two times.
    plz Help me.
    Thanks & Regards
    Venkata.
    Message was edited by:
    venkata

    Hi,
    you could ask for Form_Success when moving to detail_block (in wehn-new-block-instance i.e.) and if not form_success you could show an alert to ask for commit changes...
    Jose.

  • Flex app doesn't work when moved from original location

    I'm trying to make an image gallery in flex. It works when I run it in Flex Builder perfectly fine. The html and swf files from the bin-debug folder work perfectly fine when opened in any browser also, but ONLY when those files and all related files are opened from the default location that the application was built in. When I export a build to a different folder, the swf loads but none of the information from the xml file displays. I tried setting all of the paths of the reference files (namely the xml) in the flex app to the exact absolute location on the server, and it still didn't work when I uploaded it to the server.
    I've tried several approaches starting from scratch and they have all come up with the same issue. I'm working with an educational license for Flex Builder, I'm not sure if they jip you on those and ruin the compiled swf.
    Please help! I'm losing my mind over this.I think it has to do with something else besides the code since it works fine when I hit "Run", but if anyone thinks it will help to post the code let me know.

    when you build an application using one of the wizards (like coldfusion flex application wizard) it hard codes
    paths to cold fusion CFC's, and sometimes gets it wrong.
    If your application references cfc's (or other remote objects) then it may be necessary to adjust the flex code
    when moving the code into a different base folder.
    For example in my own application, the url is http://localhost/crm_dev_flex and the built application gets put into
    c:\inetpub\wwwroot\crm_dev_flex\bin-debug
    References in the code to components found in c:\inetpub\wwwroot\crm_dev_flex\bin-debug\components\cfgenerated
    (in the flex code these looks like crm_dev_flex.bin-debug.components.cfgenerated.<mycomponent> )
    These need to change when you move the code to somewhere else.
    Also, if you are using wizard generated cfc's then these also contain similar references that need to be changed.
    IHTH.
    Cheers

  • Reports with prompting stop working when moved from Crystal10 to crystal 11

    Issue:
    We are having trouble with Crystal Reports XI. It appears that the Crystal 10 runtime included the ability to process reports that used prompting. If we run the same report with the Crystal XI runtime, it fails.
    I can send a sample of the report.
    Error Dialog:
    Title: Internet Explorer Script Error
    Error Details:
    An error has occurred in the script on this page
    Line: 1
    Char: 1
    Error: invalid character
    Code: 0
    URL: file: /// C:/Program%20Files/Business%20Objects/3.0/crystalreportsviewers11/prompting/js/promptengine_strings_en.js
    Do you want to continue running scripts on this page?
    Yes/No
    Our Configuration:
    We use Merge Modules that install Crystal Reports through the browser via a CAB file that we created. It runs a setup executable
    The setup executable project that installs CR XI uses the following Merge Modules:
    CrystalReports11_RDC_Reportengine.msm
    CrystalReports11_RDC_Runtime.msm
    CrystalReports11_HotFix_Merge.msm (This is contrived by us from one of your hot fixes)
    Observation:
    When the install is finished, the folder structure under u2026. Crystalviewers11/prompting do not have any files like they do if we install the development environment.
    Question:
    What do we need to do to correct this situation?
    *why the reports with*
    *prompting stops working when it is moved from a Crystal 10 to Crystal 11*
    *environment.  I believe that it has something to do with Merge Modules*
    *because the files under the prompting folder do not populate with the*
    *merge module like they do with the full install of Crystal Reports.*
    Please help.
    Best Regards,
    Peter Freeman
    Edited by: Vivek Kumar Sharma on May 19, 2009 3:43 PM

    We have JDK 1.6 installed.  The License Merge Module is not related to
    this issue.
    The files under \Program Files\Common Files\Business
    Objects\3.0\crystalreportviewers11\prompting  are not being installed.
    If we copy files, into this folder structure the reports work.
    One of the Business Object's Merge Modules should install the files
    there rather than just an empty folder structure.
    I got was able to figure out how to enter a customer support message.
    They said that they could not support us because we were not on CRXIR2
    (Crystal Reports 11 Release 2).
    I found a download for CRXIR2SP4 (same thing service pack 4).
    I installed it the Merge Module names changed to include a "_5"
    Was:
    CrystalReports11_RDC_Reportengine.msm
    CrystalReports11_RDC_Runtime.msm
    CrystalReports11_HotFix_Merge.msm (This is contrived by us from one of
    your hot fixes)
    Now:
    CrystalReports11_5_RDC_Reportengine.msm
    CrystalReports11_5_RDC_Runtime.msm
    CrystalReports11_5_RDC_License.msm (should have been included)
    *CrystalReports11_HotFix_Merge.msm (not needed anymore)
    I will try to put a installer together with these.  If this work there
    will be some complexity around uninstalling the old one and installing
    the new one.

  • ML Automatically sorts files by name when moving from one folder to another.

    Hello, i usually used to move a bunch of files like images or mp3s from one folder to another and in Lion, when moving like 20+ files to another folder, they was being placed where you clicked.
    Seems that in ML when i move the same amount of same files, rather than placing them at the cursor, it just moves them and sorts by name. How to avoid this?

    Anonymous User,
    Links just request pages. Maybe the requested page could run the procedure in a before/after header process.
    Scott
    P.S. If you like, you can show your name in this forum instead of a numeric ID not only by signing your posts, but also by clicking on 'Forum Settings' and setting 'Name visible to others' to Yes. Unsigned, anonymous posts do not always elicit the most thoughtful or immediate responses from volunteer contributors to the forum.

  • Remove copy from server 'when moved from inbox' option for POP accounts

    Is this option supposed to work in all cases? (or could it be buggy?:-)
    I can't get it to work with my POP account: messages are still left on the POP server, even after when they are moved from the inbox to another local mailbox on my Mac...
    Manual selective removal of messages from the server does work (thru the 'Get info' window of the 'Gear' menu at bottom of Mailboxes pane), so this does seem to be a problem with the POP server.
    Or do I by any chance misinterpret the meaning of this option?
    PowerBook G4   Mac OS X (10.4.7)   Mail version 2.1 (752/752.2)

    You've interpreted correctly how it should work, as long as you take the following considerations into account:
    1. Messages aren't supposed to be removed from the server immediately, but rather the next time Mail connects to the POP server.
    2. It may have no effect on messages that had already been downloaded prior to you choosing that option.
    And, yes, it sometimes doesn't work as expected. It could be buggy or Mail might have problems communicating with the server.

Maybe you are looking for