Vlc-0.8.6a with --enable-mozilla

I have been trying to get vlc build the mozilla-plugin by adding --enable-mozilla to the PKGBUILD, but it won't work. The current vlc-0.8.5 has disabled the mozilla build due to build problems.
I wonder if anybody has succeeded in building the latest vlc-0.8.6a with --enable-mozilla? As I understand there is also a dependency to use faad2-cvs and optionally goom, but personally I don't need goom. Would just be nice to replace mplayer-plugin with vlc in firefox, as there are some .vmx, .vma sites that won't work with mplayer.
For the time being I must uninstall mplayer-plugin and then click on 'open with external application' and choose vlc, as mplayer-plugin overrides any other application and insists on handling it by itself and fails.
So, it would be nice to get vlc to override mplayer-plugin if they cannot get along side by side
linfan

Thank you very much I got the package built and installed and it works as expected.
I had to do three things, though, to get it to build, which you did not inform:
1) cp over /var/abs/extra/multimedia/vlc/vlc.desktop
2) cp over /var/abs/extra/multimedia/vlc/vlc.install
to the PKGBUILD directory
and
3) uninstall seamonkey.
From my earlier contacts with videolan I was told I later can reinstall seamonkey, but that I have to uninstall it when running 'makepkg'.
Thanks once again.
linfan

Similar Messages

  • TS3212 Still unable to download itunes to my pc. Tried with IE, Mozilla and Google Chrome. Keep getting an error message :"Windows cannot open itunes.exe the file is corrupt contact support."previous itunes files were wipped out by "disk cleaner." Any hel

    Still unable to download itunes to my pc. Tried with IE, Mozilla and Google Chrome. Keep getting an error message :"Windows cannot open itunes.exe the file is corrupt contact support."previous itunes files were wipped out by "disk cleaner." Any help??
    Please!
    Thanks!

    If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
    The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
    Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

  • Problem with enabling Web Services on LaserJet Pro MFP M127fw

    12:25 AM    
    I have a problem with enabling the HP Web Services. When I push the application button on the printer, the monitor shows "connecting..." and then nothing is happen or an error apear thet my device could not connect to servers. I can't print information sheet on web services panel to get the claim code and add my device in www.hpconnected.com .  My device is connected to the internet with no problem by a wireless  Dlink Router. I also changed my device IP  from 192.168.1.11 to 192.168.1.55 manually,  and I change Preferred DNS Address to 8.8.8.8 and Alternate DNS Address to 8.8.4.4 and nothings happen.   I can see the menu but I can not enable the HP Web Services in there. no proxy. no firewall.  I do not know what can I do for solveing this problem. Please help me. 

    Hi @AlirezaP
    Welcome to the HP Support Forums. I gather that you are getting a connection error message when trying to enable the web services for your Laserjet Pro M172fw printer.
    As you have already tried setting the manual IP address and manual DNS servers, please call HP’s Cloud Services at 1-855-785-2777 if you live in the USA/Canada region. If you live outside the USA/Canada region please click here to find the Technical Support number for your country/region.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • Configuring php5 with enable XML on OAS 10.1.3.x

    My requirement is to enable XML on OAS 10.1.3.5.
    I am not sure how to configure it, so I stated using separate PHP5.2 to configure with XML enable on the server. After installation, when I am starting the opmn services I am getting below error. I think the error with platform. Which means current OS version is 64bit and php5.2 stage is 32bit version I guess.
    OAS_HOME=/u20/app/MSRV1P/apmsrv1p/oracle/product/OAS
    URL : http://nacisdell277.us.oracle.com:10330/phpinfo.php
    I used below command to configure :
    ./configure prefix=$ORACLE_HOME/php with-config-file-path=$ORACLE_HOME/Apache/Apache/conf --with-apxs=$ORACLE_HOME/Apache/Apache/bin/apxs
    with-oci8=instantclient,/u20/app/MSRV1P/apmsrv1p/oracle/product/instantclient_10_2 with-config-file-path=/u20/app/MSRV1P/apmsrv1p/oracle/product/OAS/Apache/Apache/php5--enable-sigchild enable-xml enable-simplexml enable-libxml enable-dom enable-simplexml enable-xml enable-xmlreader enable-xmlwriter enable-simplexml –with-xsl -with-zlib with-xml --with-libxml-dir
    Error :
    /u20/app/MSRV1P/apmsrv1p/oracle/product/OAS/Apache/Apache/bin/apachectl startssl: execing httpd
    Syntax error on line 247 of /u20/app/MSRV1P/apmsrv1p/oracle/product/OAS/Apache/Apache/conf/httpd.conf:
    Cannot load /u20/app/MSRV1P/apmsrv1p/oracle/product/OAS/Apache/Apache/libexec/libphp5.so into server: /u20/app/MSRV1P/apmsrv1p/oracle/product/OAS/Apache/Apache/libexec/libphp5.so: wrong ELF class: ELFCLASS64
    I checked in the Metalink for “configuring php5 with enable XML on OAS 10.1.3.x” but I couldn’t find anything.
    Please advise me on this.
    Thanks

    Hello;
    You can try installing glibc-devel to fix this.
    However on my version :
    Application Server Control Release 10.1.2.3.0 - PHP 5 does not seem to work. The conflict on mine is that PHP 4 came wrapped in the Oracle install and they don't play well together.
    Make sure your httpd.conf does not have this in it :
    LoadModule php4_module libexec/libphp4.soI'm NOT advising you to remove it if its there, I'm merely pointing to a possible conflict.
    Best Regards
    mseberg
    Later
    Glad you don't have the same version as me. Hard to find anything on this, found these ( Not exact matches )
    http://php.net/manual/en/oci8.installation.php ( Search for ELF )
    http://enlinea.creaelicita.cl/guia/oci8.setup.html
    http://docs.oracle.com/cd/E17390_01/doc.650/e17370.pdf
    Found this in the pdf : ( Similar )
    If the following error is received:
    *ERROR* - obssocookie: could not dlopen()
    /opt/netpoint/AccessServerSDK//oblix/lib/libobaccess.so:
    /opt/netpoint/AccessServerSDK//oblix/lib/libobaccess.so: wrong ELF class:
    ELFCLASS32
    This indicates that the 32-bit version of the Access Gate SDK was installed instead of
    the required 64-bit version. Edited by: mseberg on Feb 4, 2012 5:53 AM
    Still later
    Another thought is the PHP forum :
    PHP
    Also you need the 32bit Instant Client to be able run PHP. See http://blogs.oracle.com/opal/entry/using_php_oci8_with_32-bit_php
    Same OS message :
    ORA-03106: fatal two-task communication protocol error
    Edited by: mseberg on Feb 4, 2012 7:03 PM
    Rogue Notes from my Fusion Middleware on Red Hat 5 64 bit
    I downloaded php-5.3.5.tar.gz from http://www.php.net/downloads.php.
    Download the OCI headers http://www.oracle.com/technetwork/middleware/ias/ociheaders-134541.tar
    environment
    export ORACLE_HOME=/u01/app/oracle/product/fmw/oracle_pfrd
    export ORACLE_INSTANCE=/u01/app/oracle/product/fmw/fr_inst
    export CONFIG_FILE_PATH=$ORACLE_INSTANCE/config/OHS/ohs1
    export LD_LIBRARY_PATH=$ORACLE_HOME/lib:$ORACLE_HOME/ohs/lib:$LD_LIBRARY_PATH
    Configure with Oracle Database (OCI8) support:
    ./configure with-apxs2=$ORACLE_HOME/ohs/bin/apxs prefix=$ORACLE_HOME with-config-file-path=$CONFIG_FILE_PATH with-oci8=$ORACLE_HOME --disable-rpath
    httpd.conf
    # And for PHP 5.x use:
    AddType application/x-httpd-php .php .phtml
    Edited by: mseberg on Feb 4, 2012 7:19 PM
    Edited by: mseberg on Feb 5, 2012 11:48 AM

  • Login screen on MacBook Pro Retina (Late 2013) with enabled File Vault is extremely slow (suttering)

    Hi
    I have a MacBook Pro Retina (Late 2013) with enabled File Vault on OS X Mavericks. When I boot up the mac freshly it takes quite long to get to the initial login screen (which as I understand is a pre-boot login provided by the recovery partition if File Vault is enabled). However, what is even more bothering me is that once I get to this screen, the whole UI is behaving extremely slow. The mouse makes jumps of a few inches on the screen and the animations (e.g. if you click a user and then an animation shows the password entry field) are running in slow motion and only update every few seconds. Typing the password afterwards runs smothly again (altought for example moving the mouse at this point still behaves as described before). After loggin in to the account OS X runs fine without any hicks. Can anyone give me a hit what this could be and how I could resolve this?
    This has already been done:
    Reset PRAM
    Boot into recovery partition and run repaired disk and disk permissions
    Run all OS X maintenance operations and cleared caches using OnyX
    What I could imagine is that somehow the recovery partition is damaged (which as I understand is used to boot to the login screen if File Vault is enabled).
    Any help would be greatly appreciated.
    Chris

    Just ordered a Retina MacBook Pro11,2 (mid-2014 15", 2.2GHz Intel Core i7, 16GB RAM, 512GB SSD, OSX 10.9.4 Pre-installed - Build 13E28)  and have the exact same issue.  The first thing I did when i booted it for the first time was enable FileValut2 and encrypt the disk.  Though I failed to notice this behavior prior to encrypting the disk, the stuttering/lag happens without fail every time I have logged in from a cold boot, locked screen or sleep. Additionally I have noticed the same stuttering behavior when switching tabs on various built-in OSX applications such as the tabs on the About This Mac > More Info.... (System Information) dialog for example, and similarly other dialogs that experience this behavior of resizing when switching tabs. I was running no other software than About This Mac > More Info ... (System Information) and OSX 10.9.4 itself.  The issue happens without fail with and without a USB mouse plugged in.
    I am really glad to have found this thread and with such recent posts.  I'd love to find out that this is just a software bug that will be fixed when OSX 10.10 "Yosemite" is released.  If not, I hope the cause of this bug is determined soon so I can still exchange or have it repaired.
    Migflono and Matthew, would you be able to post your hardware specs for comparison? 

  • Is it possible to generate PDF with "enable for commenting" from AI?

    I am using Illustrator CS5 and have Acrobat 9 Pro on a Mac. I would like to generate PDF's with "enabled for commenting" feature on.
    I was able generate a PDF from CS5 -> open it in Acrobat 9 Pro -> enable commenting -> Save as new PDF
    I prefer to skip the above mannual step and generate the PDF with commenting enabled directly from Illustrator. Any ideas?

    Acrobat 9 Pro doesn't support batch processing to "enable for commenting" feature. I can batch generate the PDFs from AI but will have to manually convert each PDF using Acrobat 9 Pro....(sucks!!!)
    Another option is that I get a Acrobat 9 Pro for Windows - install LiveCycle - tranfer my AI generated PDFs (mac) to windows and use batch processing feature of LiveCycle to convert the PDFs into "enable for commenting" (sucks less!!!)
    I would love to hear any other option available.

  • Requesting some changes for xen PKGBUILD to work with --enable-ovmf

    For background about this issue, you may want to read these two E-Mails to edk2 Mailing List:
    http://sourceforge.net/p/edk2/mailman/e … sg32776907
    http://sourceforge.net/p/edk2/mailman/e … sg32793684
    Basically, it goes like this:
    - Xen can be compiled with the optional --enable-ovmf option, so it can make DomU VMs using UEFI Firmware. Instructions here:
    http://wiki.xen.org/wiki/OVMF
    This can be done in Arch Linux by adding in the ./configure line of PKGBUILD --enable-ovmf, adding an additional step where makepkg downloads Source Code from edk2 repository.
    - Currently, it fails to build that way with this error:
    http://lists.xen.org/archives/html/xen- … 02855.html
    This error is caused because the edk2 Source Code that xen pulls during build is fresh and doesn't include any patch to make it aware that Arch Linux has both Python 3 (python) and Python 2 (python2). By default, it tries to compile with Python 3, so it fails.
    - Assuming than the Python version issue was fixed (I did it in a non-elegant way, replacing /usr/bin/python with /usr/bin/python2), it will still fail with this error:
    https://bugs.archlinux.org/task/40277
    https://aur.archlinux.org/packages/ovmf-svn/ (Some of the latest comments)
    This error is caused by building with GCC 4.9, earlier versions seems unaffected.
    The AUR has also a very similar package (If not identical) that is based on edk2 Source Code, the same which xen downloads while building, ovmf-svn:
    https://aur.archlinux.org/packages/ovmf-svn/
    This one has a PKGBUILD which includes some lines that seem to point that it is aware of both the python version issue, and the GCC 4.9 build issue, by providing a patch:
    https://aur.archlinux.org/packages/ov/ovmf-svn/PKGBUILD
    Reelevant lines seems to be these ones:
        msg "Fix GenFw: ERROR 3000: Invalid, Unsupported section alignment"
        patch -Np1 -i "${srcdir}/edk2-basetools-add-gcc4.9-support.patch" || true
        patch -Np1 -i "${srcdir}/edk2-ovmfpkg-add-gcc4.9-support.patch" || true
        msg "Use python2 for UDK BaseTools"
        sed 's|python |python2 |g' -i "${EDK_TOOLS_PATH}/BinWrappers/PosixLike"/* || true
        sed 's|python |python2 |g' -i "${EDK_TOOLS_PATH}/Tests/GNUmakefile"
    I didn't found any info regarding if Xen can work with OVMF ready-to-use binaries, or either building ovmf-svn, which I didn't tested but I suppose should build properly. All instructions regarding using Xen with OVMF request that it is added as option during build time. This forces me to have to modify the edk2 Source Code that xen downloads.
    Basically, what I want to request is if xen PKGBUILD can be modified to include a statement that checks if --enable-ovmf is being used, then make the appropriate changes to the edk2 Source Code that gets downloaded while building Xen so it successfully builds. This could *POSSIBILY* be based on existing ovmf-svn PKGBUILD code.
    This change could also be applied to other xen-based packages that can also be builded with --enable-ovmf and presents the same issues.

    FINALLY managed to get this thing working:
    http://i.imgur.com/ZWTRcn0.png
    I tried to build xen with --with-system-ovmf= as suggested like ten times or so, with no success. While xen seemed to build fine, when I tried to create a UEFI DomU, it simply opens and inmediately closes, through if using SeaBIOS worked fine. On xen IRC there was another Arch Linux user claiming that he recently got Xen with OVMF working using that parameter and the bios.bin binary from the ovmf-bin package from AUR. Installing ovmf-bin then providing xen the full path (--with-system-ovmf=/usr/share/ovmf/bios.bin) didn't worked, neither building ovmf-svn myself then using ovmf_x64.bin (Or renaming it to OVMF.fd, ovmf.bin, etc). It always builded perfectly, yet it failed to make a UEFI DomU. Still, both Firmwares worked when using qemu from the official Arch Linux repository (Note that ovmf-bin bios.bin is 1 MiB in size while ovmf-svn ovmf_x64.bin is 2 MiB, not sure what accounts for the difference).
    So how I got it working? A bit complex:
    - While in my first post I mention that ovmf-svn had a patch for GCC 4.9, it seems than the patch was removed in the last two days. Without the patch, ovmf-svn still builded properly, so I expected than the GCC 4.9 fix got included in edk2 Source Repository. This was blocking me earlier, so decided to give --enable-ovmf another go.
    - Renamed python2 to python as a workaround to not have to touch the edk2 tree that xen downloads, which worked the last time.
    - Used makepkg with --enable-ovmf in the PKGBUILD ./configure line. I expected it to work due what I mentioned earlier, but it still fails with the GCC 4.9's GenFw: ERROR 3000.
    - As a last resort measure, I decided to try to merge into xen the source that ovmf-svn PKGBUILD modifies, as that one builds properly.
    - I replaced all the directories inside xen/src/xen-4.4.1/tools/firmware/ovmf-dir-remote/ with the ones from ovmf-svn/src/tianocore-edk2-svn_build/. Not all directories were replaced, seems than ovmf-svn just downloads the parts of the tree required for building the OVMF Firmware, not everything, which xen does.
    - Used makepkg again, which used the existing source to try to build again.
    - It builded, no python or GenFw error. Installed the new package, rebooted, tried to make the UEFI DomU and BAM! There it is, as you can see in the Screenshot.
    Why can some users get this running with just providing bios.bin from ovmf-bin while I have to do a walk around the globe is anyone guess...
    To not derail this request further, I can say the following:
    - Assuming than --with-system-ovmf= works consistently, which for me didn't, is currently possible to build Xen with OVMF, so making a more complex PKGBUILD to be able to use --enable-ovmf may not be needed.
    - --enable-ovmf is still useful because it may reduce a two-step process (Installing ovmf-bin or building ovmf-svn) into one, through I'm not sure if there are pros/cons for each approach besides than you will have latest OVMF version compared to the ready-to-use binary. It also makes xen package more compatible with the mainstream Xen instructions, as  --with-system-ovmf= is quite unknow.
    These decisions are for kantras to make.
    Last edited by zir_blazer (2014-09-06 06:54:02)

  • OSB 11g - list Proxy services with enabled tracing

    Hello.
    I went through OSB API and haven't found out a way, how to by script (Java or WLST):
    - list Proxy service with enabled 'Execution Tracing'
    - enabled and disable 'Execution Tracing'
    Is there a way, how to do this by script somehow? I know, how to do it in SB console (e.g. on Smart Search page), but that's not what I want.
    Thank you for your help

    You may like to refer metalink note 1380705.1 and OSB java API (section "Using MBeans in a script")-
    http://docs.tpu.ru/docs/oracle/en/fmw/11.1.1.6.0/apirefs.1111/e15033/com/bea/wli/sb/management/configuration/SessionManagementMBean.html
    Regards,
    Anuj

  • Making a counter with enable and reset

    Hi.  
    First of all, I looked online for this solultion and no success.
    What I am trying to do is have a counter with enable and reset.  
    1.  Increment from 0 to 5 everytime true boolean is received.  Q, the output should then be 1
    2.  If boolean false is received, Q should be 0
    3.  Once the count reaches 5, reset the counter to 0 and repeat.
    4.  Step 1-3 only happens when enable is true.  Anytime enable is false, the process is stopped.
    Please help!
    Rose

    This is something called an Action Engine, closely related to "Functional Global Variables" (FGV) or "VI Globals" (VIG).  Basically, you have a While Loop with one or more Shift Registers acting as "memory" and an "Action" input (typically a Boolean or an Enum) that says what the Action should be.
    As you posed your problem, I'm unsure if you require one Boolean (Enable/Disable) or two (Enable/Disable and "Count").  This is a situation where having an Enum input and more "Actions" might be appropriate.  For example:
    Load      Save the Max Count (5 in your example) in a Shift Register
    Reset    Set the internal Count to 0
    Enable   Allow Count Action to proceed
    Disable  Don't allow Count Action to proceed
    Count    Increment counter if "enabled", and output current count
    Each time you call this VI (did I say that this should be written as a sub-VI, with inputs Action and Max Count, and output Current Count?), depending on the Action you wire in, you will either perform "setup" actions (Load, Reset, Enable, Disable) or "Counting" actions (Count).  Note that it is easy to modify it so that if the Counter is disabled (ooh, that's a good name for this sub-VI, "Counter", has a mnemonic ring to it), the output is, say, -1, "Not a Count", instead of (as I described it above) the last Count while Enabled.
    Action Engines (and similar constructs, where there's a While loop with "True" wired to the Stop terminal, useful as a "memory" unit) are pretty common in LabVIEW.  More accomplished LabVIEW users might also accomplish this with a Feedback loop, but I find that the "Do Once" loop shown above is easier for me to recognize and understand.
    Bob (hard to teach an old dog new tricks) Schor

  • Deploying Software to WES7 Device with enabled Write Filter

    Hi all,
    we are deploying SCCM Applications to WES7 with enabled FBWF. The Option "Commit changes at deadline during maintanance window" is enabled on the Deployment, and the installation itself works perfectly fine. (Reboot, Installation with Lockscreen,
    Reboot)
    But after the installation is finished, it takes some minutes (up to 20) until the device reboots to re-enable the Write Filter.
    Is there any flag or command we can set or execute at the end of the installation to reboot and unlock the Workstation?

    I don't have a direct answer, but this forum is for Windows Embedded POSready. You might want to post to the Windows Embedded Standard 7 forum:
    http://social.msdn.microsoft.com/Forums/en-US/home?forum=quebecservicingdeployment
    www.annabooks.com / www.seanliming.com / Book Author - Pro Guide to WE8S, Pro Guide to WES 7, Pro Guide to POS for .NET

  • Fdm, create app with enabling "Windows Integrated Security"

    currently, we need to enter UserID and Password each time we create a new fdm app on the web. we also cannot sign into the Workbench client.
    how do we configure the system, so that we can create applications WITH enabling "Windows Integrated Security", so that we can use the same password to sign into the Workbench client.
    thanks.
    Edited by: user642786 on Feb 7, 2011 9:35 PM
    Edited by: user642786 on Feb 8, 2011 11:54 AM

    os admin takes care of this.

  • I downloaded Mozilla 4 and tried to use it then, I had to delete it and go back to 3.6 vs now I am having problems with my MS SQL 2005 why? What was changed to enable Mozilla 4 to sync with MS SQL and how do I get it corrected?

    After, trying Mozilla 4 beta and then having to go back to a previous vs of Mozilla 3.6.11 my MS OLE DB Provider for SQL 2005 Server has this error message '80040E57' I am using Windows 7 which was pre-installed on my new computer. I do not know how to fix it?

    The latest flash player release is 11,0,1,152.
    Can you upgrade to this version and see whether the crash stil exists?
    Go to get.adobe.com/flashplayer to download and install flash player.
    In case you need direct link to installer/uninstaller, please go to http://forums.adobe.com/message/3952360#3952360 to find them.
    saranlee wrote:
    My computer crashes repeatedly and I get the message pages are not responding do you want to stop, and/or shockwave is not responding do you want to stop. I have Windows XP Service Pack 3, I am having the same issues whether I use Internet Explorer, Google Chrome, or Mozilla Firefox. My HP Pavilion Desktop has 504 MB of Ram and I am using high speed internet connection. Because it was crashing so much, I used the uninstall program for Flash player to uninstall Flash, I checked my registry and removed anything I saw that was Flash. I then uninstalled Google Chrome and Mozilla Firefox, then I reinstalled the most recent versions from their websites. I did the same for FlashPlayer and Shockwave Flash. I went to the Adobe website and had them check to see if it was working and it shows I have FlashPlayer 10.3.181.36. The page that shows  which version of flash player goes with Windows XP states that I should have 10.3.181.34 (This is what I thought I had before I updated, I was having the same problems). When I went into my computer to see what version I have, it shows 11.5.9.620 Activex and both Flash Player and Flash Player Object is listed as 10.3.181.34. My firewall for Windows is set to medium. I also am running Norton Internet Security. It takes anywhere from 3-6minutes for some of my games to load, and I have to refresh at least 3-4 times in order to play. When I do start to play it freezes frequently and I use escape to free it up. This has been going on for a month. I have no idea what to do. I am not very computer savy and I have been learning as I go.

  • VLC player plugin conflict with Windows Media Player plugin in Firefox 8.0.1

    After I upgraded to Firefox 8.0.1, Windows Media Player stopped playing embedded videos within the Firefox browser.
    If you go to Add-ons and disabled VLC player plugin, Firefox will start to plays any Windows Media Player videos without any issue.
    The minute I click to enable VLC, Windows Media Player stop working again. This problem is not used to happen in Firefox 6.02.
    Please help me with problem. any suggestions will be appreciated.

    You can disable the VLC plugin from the Addons window. Choose Plugins, find VLC in the list and disable it.

  • How I can run Firefox with enabled Responsive design mode from command line?

    I trying to find a way for running Firefox with already enabled Responsive mode with predefined resolution (for selenuim testing) for standartizing a viewport size in different OS`s.
    Thanks!

    These are all the command line options [https://developer.mozilla.org/en-US/docs/Mozilla/Command_Line_Options Command Line Options]

  • Help with enabling TPM in Task Sequence for Dell Laptops

    Hi there,
    I would appreciate some advice on creating a task sequence for Win8.1 with TPM enabling for Dell laptops; I have BitLocker set up manually with a Group policy, but want to have TPM enabled in the task sequence. I have read older posts on sites such as windows
    noob, but can't see how to reference the CCTK and get TPM going for win8.1 in a SCCM2012 environment. 
    Obviously I haven't created this before so any help would be appreciated; I have noticed when I try to import my CCTK configurations into SCCM as it isn't a zip file I cannot do it.

    Luckily Dell wrote a whitepaper about that subject, see:
    http://en.community.dell.com/techcenter/extras/m/white_papers/20209083
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

Maybe you are looking for