VLC - http interface error

I've searched the web and found very few clues to why this happens. To run vlc -I http --media-library works fine as to connect. The problem is that in the play-list I get nothing most of the time. At times my library suddenly may appear, but 95% of the time it won't. Some clicks in the play-list menu give this output: http interface error: this needs to be fixed to use the new playlist framework.
Since I see few reports about this it might indicate that I'm doing something wrong here. I really want it to work because this is a very easy way of getting a remote box (it like a music media system) to play mms streams. I've tried the current version and also the git version from AUR. I tried to build the nightly build but the connection doesn't work at the moment. Anyway same problem with both.
Any suggestions?

I haven't been able to understand why the http code of VLC fail to show playlist and medialibrary. My own solution is simply to edit VLC's index.html and add whatever radio-streams I want. I can't spend more time on this anyway, so more important is that it's working the way I want it to.

Similar Messages

Open DeviceNet interface error when TestStand call VIs of NI PCI-8532

Hello,
We use NI PCI-8532 was used as DeviceNet master to do functionality test with a slave (AC Drive).
But when open DeviceNet interface, it happen the error.
We can't find the solution and hope to find help from you.
The basic sequence in TestStand is:
1). Call "Open DeviceNet Interface.vi" to open interface and creat interface object.
Interface(master) setting: interface name=dnet0, MAC ID=0, baudrate=125000bps
2). Call "Open DeviceNet IO.vi" to creat DeviceNet IO object.
Device(slave) setting: MAC ID=63
3). Call "Operate DeviceNet Interface.vi" and operation code=start
4). Call "Wait For State.vi"
5). Call "Read DeviceNet IO.vi" to read data from IO object
6). Call "Close Object.vi" to close IO object handle
7). Call "Close Object.vi" to close interface object handle
Remark, these DeviceNet VIs locates at "C:\Program Files\National Instruments\LabVIEW 2012\vi.lib\DeviceNet\VIAPI".
First time to run sequece in TestStand, it can pass to run step 1) to open DeviceNet interface.
But once there is some error with these steps, and it will happen "Open DeviceNet Interface" error (error code=0xBFF62006) when run these steps again.
Then even use LabVIEW DeviceNet example to test, and it happen the same error except restart computer.
The DeviceNet example locates at "C:\Program Files\National Instruments\LabVIEW 2012\examples\NI-Industrial Communications for DeviceNet\Basic Examples\PXI & PCI\MixedCommunication.vi".
Some information more:
PC operate system: Windows XP SP3
LabVIEW version: 2012 SP1
TestStand version: 2012 SP1
PCI 8532 driver version: 2.3.0
Other installed PCI board: PCI 8531 CANOpen

The following errors may be resolved by resetting the CAN, DeviceNET or LIN device:
Error -1074388986 occurred at ...
NI-CAN: (Hex 0xBFF62006) The object is already open in another application. Solutions: Ensure that only one application at a time uses an object , and that you close all objects prior to exiting your application (don't use LabVIEW toolbar's Abort button).
Error -1074388969 occurred at ...
NI-CAN: (Hex 0xBFF62017) This attribute's value must be provided prior to the Open. Solutions: Set the attribute using the Config function before the Open, and do not set the attribute at any later time; Do not configure multiple CAN Objects for the same ID.
SO,you should reset the DeviceNet.
And another similar issue can explain some points of your problem http://digital.ni.com/public.nsf/allkb/7D9383E9BEAD0B21862571640002F687?OpenDocument

HTTP Transport Error in Net BEans 6.5

Hello,
I am consuming a web service using JAX-RPC. I am trying to log onto a web interface through my program but I am getting the following error:
Feb 6, 2009 1:10:54 PM ttsample.Engine Login
SEVERE: null
java.rmi.RemoteException: HTTP transport error: java.net.UnknownHostException: http; nested exception is:
Logged in...
HTTP transport error: java.net.UnknownHostException: http
at ttsample.TtsoapcgiPortType_Stub.databaseLogon(TtsoapcgiPortType_Stub.java:819)
at ttsample.Engine.Login(Engine.java:77)
at ttsample.Main.main(Main.java:30)
Caused by: HTTP transport error: java.net.UnknownHostException: http
at com.sun.xml.rpc.client.http.HttpClientTransport.invoke(HttpClientTransport.java:140)
at com.sun.xml.rpc.client.StreamingSender._send(StreamingSender.java:96)
at ttsample.TtsoapcgiPortType_Stub.databaseLogon(TtsoapcgiPortType_Stub.java:802)
... 2 more
I searched the web and found that this is a proxy setting proble.
I configured apache earlier to use the local host that run the web client.
When I change the http port host and port number and try to login into the web client its giving me page not found error.So I changed the proxy settings to default and then restarted the system and then tried to log into the web client and it worked.
I dont know where i am going wrong.I want to consume the WSDL and log into the web client but i am gettingthe above error.
Anyone's help will be greatly appreciated.
Thank You,
Sravanthi.

Where did you get the address: http://sal006.salnetwork.com:82/bin/lccountrycodes.cgi (shouldn't the 82 be 83 instead?)

Can't burn CD's - "Interface error 5"

Hello, I haven't used my old firewire LaCie CD burner (LaCie 1394, blue front with the slide out tray) in a while but recently I needed to put some graphics files on a CD. The sw I'm using is Toast 6. No matter what I tyry to do I get the following message: "Interface Error: 5 The connection is not stable"
I tried different CD brands, no effect.
This is the setup.
Machine Name: Power Mac G4 Cube
Machine Model: PowerMac5,1
CPU Type: PowerPC 60? (1.1)
CPU Speed: 1.3 GHz
L2 Cache (per CPU): 512 KB
L3 Cache (per CPU): 2 MB
Memory: 1.25 GB
Bus Speed: 100 MHz
Boot ROM Version: 4.1.9f1
System Version: Mac OS X 10.4.2 (8C46)
Kernel Version: Darwin 8.2.0
Looking for answers I found an (unanswered) message on a macosx.com forum. I'm reposting it because it provides more info about the same problem:
[quote]
"Burning the disc failed because communication to the disc drive failed. (Error code 0x80020022)" -- Is the error code when I attempt to burn any disc using the Finder or Disk Utility.
"Interface Error: 5 The connection is not stable.
The drive reported an error:
Sense Key = Illegal Request
Sense Code = 0x210x02
BUFFER UNDERRUN" --
Are the errors when I attempt to use Toast Titanium v6.x and v7.x.
I'm using an iMac G5 running 10.4.2. I have two burners, both of which give me the errors and will no longer burn to CD's or DVD's (cheap or expensive media, I've tried many different types). The burners i have are an internal superdrive that came with the mac (MATSHITA DVD-R UJ-825) and an external LaCie Firewire DL drive (_NEC DVD_RW ND-3500AG). Both drives started giving this error at the same time and I can't think of anything that I installed that could effect these. I don't have any speed tools installed.
I have tried all that Apple suggests in the articles http://docs.info.apple.com/article.html?artnum=25750.
I've experienced the same errors twice before, though not both drives at the same time. What fixed it the first time was simply upgrading the firmware on the burner. Second time, there were problems on the hard drive that I was burning from (directory issues if i remember) and running a combination of Tech Tool and Disk Utilitity fixed that.
But this time, I'm at my wits end and can't find anything helpful online. I'm hoping to find an answer before I end up trying a complete system reinstall.
Any info would be greatly appreciated.
[/quote]
Yes, any info ...
TIA
Cube, 2 ibooks Mac OS X (10.4.2)

I'm having the same problem using Toast 7 to burn a Video TS movie I made. I'm using an external Lacie 16X DVD-R DL drive and an iMac G5 2.0, and Mac OS 10.4.3
After several failures with Interface Error 5, I tried copying a DVD movie I made from another DVD. This was created with the same Lacie drive using Mac OS 10.3 and my old iMac FP 15 inch. I got the same failure message.
I then switched my Lacie Drive to the USB port and everything is working fine. I switched it back to FireWire and I get the same error message again.
I can play DVD's on the Lacie with either the USB or FireWire port without any problem, I just can't record using the FireWire port. The FireWire ports on the computer work fine with all my other FireWire devices.
It must be a combination of 10.4.3, Toast 7 and Lacie FireWire. I'm going to recheck Lacie's site to make sure I have all of the updates.
iMac G5 Mac OS X (10.4.2) Mac OS 10.4.3

HTTP GET Error - PI does not allow more than 200 chars in the dynamic URL

Hi Everyone,
Scenario RFC <-> PI <-> HTTP (GET).
PI 7.1, Service Pack 05.
HTTP Setup > URL Address
The response comes back from the target server when stuffing the URL path in the communication channel "Path" field.
/rest?&xml_request=......................................................
The requirement is to dynamically create the URL in the mapping program. While doing this the interface error out saying the URL exceeds the character limit of 200.
Any thoughts on this would be highly appretiated.
Thanks,
AJ

Please check Mark's reply
http://forums.sdn.sap.com/thread.jspa?threadID=1944129

SOAP to SOAP / HTTP 200 error

Hi
I have the following scenario   SOAP to SOAP and am getting a HTTP 200 error.
com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: No SOAP Envelope but 1 definitions; HTTP 200
I have configured a sender SOAP channel with default values (Nothing is checked).   My receiver channel is configured in a similar manner. The SOAP action is specified. I have tested the receiver webservice in WSNavigator and successfully can get it to call.   The webservice was created from a function module that has used the create webservice functionality, and then endpoints created in SOAMANAGER.
There are no mappings in this scenario.
When I right click on the sender agreement and get the WSDL, I take that URL and place it into the WSNAVIGATOR tool. I supply the same values that I did when I called the service directly.   When I execute, the error above appears in SXMB_MONI.
Ideas?

Here is the error. There is no principle propagation and the user is setup in the BI system.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: No SOAP Envelope but 1 definitions; HTTP 200 OK</SAP:AdditionalText>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Edited by: Mike Marowski on Feb 18, 2010 12:12 AM

Help: Net.lib interface error

Hi!
I'm using the Palm Emulator to make a HTTP connection to my servlet. The same MIDlet works on my Palm, but when I run it on the emulator (in order to some screen captures), I get error mesg that says "Net.lib interface error: 0x0000120C", followed by java.io.IOException.
I've already set my proxy IP ...
Can someone pls help? TIA!
Rgds

Hi ....
Is anyone have any ideas to solved if this problem occur on the real palm m505 machine ??
Please advice and kindly reply
Thank
SL

HTTP Adapter error description not showing in alert

I have created a alert thru alertcatdef & created a rule in administartion, when we have a issue with http adapter, I get the alert as follows
Subject: HTTP Adapter Error
Importance: High
Alert ID: ##06488##
HTTP Adapter Error - Possible Tracs Interface issues
Please Review details here below:
Time: 10/23/2008 - 13:56:58 - DPI -HP-UX DPI 700
Messages_ID:
Rulename:
Error Category:
Error Code:
Sender Info:
Service:   Interface: Namespace:
Receiver Info:
Service: Interface:   Namespace:
Adapter Type:
Adapter Error:
there is no error description when this alert generated, is there anything I missing on the alert, can some throw some suggestions
thanks
ramesh nallapu

In the slg1, I see
Alert was generated in logical system DPICLNT010
Alert is generated on the Central Alert Server
Alert category: HTTP_ADAPTER
Expiry time: 20081024 135658
Recipient from alert category: XIDEV
Recipient from alert category: XISUPPORT
Delivery by e-mail to XIDEV
Delivery by e-mail to XISUPPORT
External ID of alert: 06488
Delivery                                                 1 completed
Alert created. ID: 49008E897C8C5D01E1000000C085E11E
thanks

SQL 2008 R2 error: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified

after some year work with SQL server 2005,i decide change to SQL server 2008 R2.
When i completed install SQL 2008 R2,i can't connected to SQL server due to this following error
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (.Net SqlClient Data Provider)
And when i click to technical details,i take some thing like this
===================================
Cannot connect to HUY-PC\SQLEXPRESS.
===================================
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-1&LinkId=20476
Error Number: -1
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
Please!!!Some body help me solve this problem(except format my computer),i really really need your advice.

Hi huydaibang,
The older version SQL Server 2005 could be installed with SQL Server 2008 R2 side-by-side. It could not be the problem.
The reason that we get this error message is the client stack could not receive SSRP response UDP packet from SQL Browser.
Here are the steps:
1) Make sure your server name is correct, e.g., no typo on the name.
2) Make sure your instance name is correct and there is actually such an instance on your target machine.
3) Make sure the server machine is reachable, e.g, DNS can be resolve correctly, you are able to ping the server (not always true).
4) Make sure SQL Browser service is running on the server.
5) If firewall is enabled on the server, you need to put sqlbrowser.exe and/or UDP port 1434 into exception.
For more information, please refer to
http://blogs.msdn.com/b/sql_protocols/archive/2007/05/13/sql-network-interfaces-error-26-error-locating-server-instance-specified.aspx.
Thanks,
Maggie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. This can be beneficial to other community members reading the thread.

Sending MATMAS05 IDOC via XML-HTTP Interface (without XI)

Dear all,
I have to send the MATMAS05 IDOC via XML-SOAP-HTTP Interface to a subsystem. Sending works (the sub-system receives the SOAP-Request with the MATMAS05 as Body). So far so good. Now the SAP System is waiting for an answer (synchronous communication). How should this answer look like?
We receive the Error EA390 "Problem with SOAP Class" - execute_processing: entry result table
Can anybody give me a hint how the response should look like.
Many thanks and best regards
Roman

Hello Sven,
we find a solution. As far as I remember, there is a flag to send without waiting for answer (or technical better to not rely on SOAP standard).
Look in WE21 and the XML_HTTP Port you use. Uncheck the "SOAP Protocol" flag. Then it should work.
HTH and Best regards
Roman

Missing 1x1.gif - HTTP 404 Error

Hi all,
I´m in version 7.0 package 08.
I have a problem with the service BBPGLOBAL, where the 1x1.gif is not displayed.
I saw this note: Note 961775 - Missing 1x1.gif - HTTP 404 Error - File Not Found
But not works wit the version 7.0.
Any help?
Thanks,
Pedro Marques

Hi Pedro
Unfortunately SAP left these transactions by mistake or for some other purpose.
you need to connect Enterise Portal with SRM .
You need install business packages for SRM 7.0
Note 1232945 - BP for SRM 7.0: Installing the Business Packages
Note 1178469 - BP for SRM 7.0: Additional installation information
The SAP Supplier Relationship Management (SAP SRM) system uses a user interface (UI) concept
based on the SAP NetWeaver Portal and Web Dynpro technologies. Organizing, planning, and
monitoring take place in the SAP NetWeaver Portal while tasks are executed in separate Web Dynpro
application windows. To integrate SAP SRM with the SAP NetWeaver Portal, you must configure
both the SAP SRM and SAP NetWeaver Portal systems. This document describes how to automate the
mandatory configuration you need for this integration.
then you can see DYNPRO screens.
http://wiki.sdn.sap.com/wiki/display/SRM/EnterprisePortaland+SRM
Muthu

Intermitten error - SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified

Problem: I have a 2 WFE & 1 App server in my SharePoint 2013 Enterprise Edition SharePoint farm. My WFE 2 and App servers connect all the time to the SQL Server using a SQL alias. My WFE1 server work 80% of the
time. It is setup exactly like WFE2 except periodically 1 web app/site collection will stop working and throw the following error:
"A network-related or instance-specific error occurred while establishing a
connection to SQL Server. The server was not found or was not accessible. Verify
that the instance name is correct and that SQL Server is configured to allow
remote connections. (provider: SQL Network Interfaces, error: 26 - Error
Locating Server/Instance Specified)"
When I log into WFE1 I can connect to SQL using the alias using a udl file and telnet to verify the SQL alias is connected.
Hypothesis/guess: It appears like WFE1 periodically looses networking but only for 1 specific site collection.
Any ideas are most welcome?

Hi Aries,
I can rule out SQL Server (AOAG) Always-on as the farm doesn't use it.
"max worker threads" is set to 512 with 4CPU's. Rule out.
From the log and looking at the breakdown of the SharePoint request, the request is hitting the WFE2 server which in turn is trying to connect to the content database. The connection string/instance is not available. In summary, I believe the
issue is WFE2 periodically cannot connect to the SQL instance. At the same time WFE1 is working so we know it isn't the SQL server. WFE1 & WFE 2 are on the same VLAN and both appear connected and can see the SQL database using a udl file.
WFE2 has other web applications that are working while the erring web site fails. An IIS reset fixes the issue and restarting the "App pool" for the offending IIS website also fixes the problem. This tells me the issue
is the IIS process. When it tries to connect to SQL /the content database it fails.
I already raised the ticket with MS , the engineer has been looking at it with me, we have tried to identify the issue and also looked at TCP Chimney offload being a possible issue. As my servers is Windows Server 2012, all the servers have the default
"TCP Chimney Offload" setting set to "disabled". WFE1, WFE2, APP1 and SQL have the same setting so this is not the issue. At least this has been ruled out.
http://support.microsoft.com/kb/951037
http://blogs.msdn.com/b/psssql/archive/2008/10/01/windows-scalable-networking-pack-possible-performance-and-concurrency-impacts-to-sql-server-workloads.aspx
I will keep posting about the problem, hopefully MS support can escalate and the root cause can be determined.
"The bottleneck is on the WFE2 server process trying to communicate with SQL. SQL is up and listening. Only 1 of the website/WebApplication on WFE fail for 15-20 minutes while the other websites are fine."

Lync SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified

Dear all,
I'm getting an error when I want to publish my Lync Topology. Thanks in advance.
error:
Error: A network-related or instance-specific error occurred while
establishing a connection to SQL Server. The server was not found or was not
accessible. Verify that the instance name is correct and that SQL Server is
configured to allow remote connections. (provider: SQL Network Interfaces,
error: 26 - Error Locating Server/Instance Specified)

Hi,
Would you please elaborate your Lync server environment?
Did the FE server and BE server on different subnets? If so, please try to relocate the SQL server in the same subnet as FE server and then check again.
Please also double check if the step of “Prepare first Standard Edition Server” ran succeed, if not please run again.
Here is a blog may help you:
http://terenceluk.blogspot.com/2011/05/publishing-lync-server-2010-standard.html
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software
or information found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Why do I keep getting Error 519: Server interface error" - Server interface error "no component returned from creativewidget' Line: 479 - var test = parent.add('statictext', undefined, text) when I try to use pattern fill/scripted patterns. I have unin

Why do I keep getting Error 519: Server interface error" - Server interface error "no component returned from creativewidget' Line: 479 -> var test = parent.add('statictext', undefined, text) when I try to use pattern fill/scripted patterns. I have uninstalled and re-installed PS CC. I have opened holding down shift to disable third party plug-ins. I have moved 3rd party plugins to a temp location outside of ps and it still doesn't help. It worked once, and only once and now won't work at all.

Unless your Photoshop question has to do with a download/install error, you should ask in Photoshop General Discussion
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Interface errors (crc, in/output, collisions etc.) via snmp

Hi,
I'm trying to understand how to get interface errors via SNMP. I do get stats via SNMP for ifInErrors / ifOutErrors etc, but I'm trying to get output via SNMP for the errors visible via the 'sh int x' command - CRC errors, input / output errors, collisions, runts. giants etc.).
1) The SNMP ifInError / ifOutError seems to give an overall counter of all errors from the time the device has started - Am I correct about this?
2) Is there any way I can get the interface-specific errors noted above via SNMP?
Thanks,
Mario

Depends on the device and version of code, but most likely you will get what you want from the CISCO-IF-EXTENSION-MIB. Look at objects like cieIfInRuntsErrs, cieIfInGiantsErrs, and cieIfInFramingErrs. You will also get some ethernet-specific errors from the ETHERLIKE-MIB.

VLC - http interface error

Similar Messages

Maybe you are looking for