Vlc : snapshot doesn't work

Taking a snapshot in vlc doesn't work in 2.2.0 and 2.2.1
It works in 2.1.5-5

happens when you are not installing properly packages. NEVER do pacman -Sy vlc. things may break because is not pulling updates too.
pacman -Syu vlc

Similar Messages

[solved]vlc audio doesn't work for HD videos on spdif

As said vlc doesn't work with HD videos, and now I tried to get it to work my normal videos have echo.
I have spdif output and use alsa. Everything worked just few day back. It might be the update to KDE4.4.1, but I'm no sure.
I'll give more ifo when I get it.
Never mind I reset the vlc settings and everything works fine.
Last edited by Primoz (2010-03-07 10:51:59)

Wow...looks like I spent waaaaay too much time on this problem. The mute button on my IR remote wasn't working which is why I thought it couldn't be a mute problem, but it seems that is just an LIRC mapping problem. When I use the keyboard +, it un-muted. Now to fix LIRC...
Thanks kid

[Solved] vlc updating doesn't work properly.

pacman -Sy vlc
cause "2503 segmentation fault" in line 1 of INSTALL script
I tried uninstalling the previous version and reinstalling but I keep
having the same issue.
package version is 1.1.4.1-2
I downgraded ... to 1.1.2-2 ... everything fine.
check it out.
Last edited by saronno (2011-12-16 16:26:28)

happens when you are not installing properly packages. NEVER do pacman -Sy vlc. things may break because is not pulling updates too.
pacman -Syu vlc

Need to convert a AVI video to be able to see it on a MACBOOK Air. VLC doesn't work

I need to convert a video from AVI format to a other format that can be read on my MacBook Air.
VLC doesn't work. any other suggestion? Free will be better
Thank you

Is it a bad thing to put my MacBook Air 13" directly on my bed not raised on a flat surface?
Yes, yes, and Yes
Considerations for the long life of your Macbook Air. Handling and environmental care tips
Don’t use your MacBook Air on the beadspread or pillow
Do not place your MacBook on a pillow or other soft material when it's powered on, as the material can block the airflow vents (in particular, the rear vents) and cause the computer to overheat. Never place anything over your keyboard when operating in closed-lid (clamshell) mode. This can cause your computer to cycle on and off, which might create excessive heat and drain your battery. Use a lapdesk if you want or plan on using your Macbook on your bed or couch, or in your lap.
Use of your notebook on a mattress or pillow blocks your notebook from circulating air as it needs to, and can lead to overheating rapidly
Lap desk for use with your notebook on the bed, your lap, or couch. Also very useful for removing wrist strain

Snapshot function doesn't works in APEX 9.3.2, if the Aero Design is turned on

Hello,
the Snapshot function doesn't works in APEX 9.3.2, if the Aero Design is turned on. Once you click on tools > Snapshot > raster, the window where the displayed 3D model will be white.
The same happens when you click on the taskbar.
There one other option than to turn off the Aero Design?
System:
OS: Windows 7 32bit
APEX 9.3.2
nvidia Quattro NVS160
4GB RAM
Dell Latitude E6400
Thanks,
Olli

Hello,
the Snapshot function doesn't works in APEX 9.3.2, if the Aero Design is turned on. Once you click on tools > Snapshot > raster, the window where the displayed 3D model will be white.
The same happens when you click on the taskbar.
There one other option than to turn off the Aero Design?
System:
OS: Windows 7 32bit
APEX 9.3.2
nvidia Quattro NVS160
4GB RAM
Dell Latitude E6400
Thanks,
Olli

Safari doesn't work after new Installation of Lion

Hello,
I installed a new SSD into my MBP mid 2009 and put the HDD into the optibay instead of the Superdrive, after that I installed OSX Lion onto the SSD and used the Migration Assisstent to migrate my old User Folder from the HDD with the newly installed OSX Lion. After the migration, everything went well, except of the following:
-Safari doesn't work, no website can be loaded, as soon as I run Safari, there is a process running named "Webprocess" which uses 95% of the CPU and makes the MBP heating.
-VLC Media Player does not work as well
Any idea anyone?
thx
Mohammad

Another problem is:
When I start the Dropbox Application, it uses nearly 90% of the CPU as well, so the mac heats up, in a way that it is not possible to use the dropbox application...
(The Icon of the VLC Media Player only jumps up and down in the dock, and nothing else happens)

BitmapData draw method doesn't work when the project is published as the .swf file of the web applic

Hi,
        I am totally confused by this strange error. When I tried using the draw method of BitmapData to draw a movieclip symbol of my project, it seems to work fine locally. However, as I uploaded the published .swf file to my web server and launched it as the plugin of my web application, it failed. The source codes as follows,
function printscreenClicked():void
     //ExternalInterface.call calls a javascript function to print message1
    var bd:BitmapData = new BitmapData(stage.width,stage.height);
    //ExternalInterface.call calls a javascript function to print message2
bd.draw(stage);
    //ExternalInterface.call calls a javascript function to print message3
message3 didn't show at all. Instead, the browser console shows "Uncaught Error: Error calling method on NPObject.". My understanding of this error message is that the .swf is calling something crashing, and I believe that bd.draw(stage)is the crashng method call.
Also, here is my html embed tag:
    <embed src="/tests/videoplayer.swf" id="flash" quality="high" height="510" width="990" scale="exactfit" name="squambido" align="middle" allowscriptaccess="always" allowfullscreen="true" type="application/x-shockwave-flash" pluginspage="http://www.macromedia.com/go/getflashplayer" style="margin: 0px auto;clear:both;position:relative;"/>
Can someone help me?

Thank you for your reply.
I tried stageWidth and stageHeight, but it still doesn't work.
The draw() methid is triggered when I clicked a screenshot button in my application as follows,
ExternalInterface.addCallback("printscreenClicked", printscreenClicked);
function printscreenClicked():void
     //ExternalInterface.call calls a javascript function to print message1
    var bd:BitmapData = new BitmapData(stage.width,stage.height);
    //ExternalInterface.call calls a javascript function to print message2
bd.draw(stage);
    //ExternalInterface.call calls a javascript function to print message3
Would you please give me an example of "waiting for Event.RESIZE is good, or just at least Event.ENTER_FRAME"?
My real purpose in this application is to capture a snapshot of a streaming video. The video is contained in a movieclip object. I tried stage first since BirmapData.draw() doesn't work when drawing the movieclip on the web site. Do you have any suggestion for this situation? Also, is there any good method to find out what happened if the browser have "Uncaught Error: Error calling method on NPObject."?

Mplyer sound doesn't work, instead amarok's sond work !!!

hi everyone, the problem is that mplayer's sound doesn't work.
the sound with Amarok and Firefox(e.g youtube) works, but with mpalyer no !!!
i've posted some commands:
thanks
/etc/mplayer/
codecs.conf example.conf input.conf
/etc/mplayer/example.conf
# MPlayer configuration file
# Configuration files are read system-wide from /usr/local/etc/mplayer.conf
# and per-user from ~/.mplayer/config, where per-user settings override
# system-wide settings, all of which are overrriden by the command line.
# The configuration file settings are the same as the command line
# options without the preceding '-'.
# See the CONFIGURATION FILES section in the man page
# for a detailed description of the syntax.
# Profiles should be placed at the bottom of the configuration file to ensure
# that settings wanted as defaults are not restricted to specific profiles.
# video settings #
# Specify default video driver (see -vo help for a list).
#vo=xv
# Use SDL video with the aalib subdriver by default.
#vo = sdl:aalib
# FBdev driver:
# mode to use (read from fb.modes)
#fbmode = 640x480-120
# location of the fb.modes file
#fbmodeconfig = /etc/fb.modes
# Specify your monitor timings for the vesa and fbdev video output drivers.
# See /etc/X11/XF86Config for timings. Be careful; if you specify settings
# that exceed the capabilities of your monitor, you may damage it.
# horizontal frequency range (k stands for 1000)
#monitor-hfreq = 31.5k-50k,70k
# vertical frequency range
#monitor-vfreq = 50-90
# dotclock (or pixelclock) range (m stands for 1000000)
#monitor-dotclock = 30M-300M
# Start in fullscreen mode by default.
#fs=yes
# Change to a different videomode when going fullscreen.
#vm=yes
# Override the autodetected color depth, may need 'vm=yes' as well.
#bpp=0
# Enable software scaling (powerful CPU needed) for video output
# drivers that do not support hardware scaling.
#zoom=yes
# standard monitor size, with square pixels
#monitoraspect=4:3
# Use this for a widescreen monitor, non-square pixels.
#monitoraspect=16:9
# Keep the player window on top of all other windows.
#ontop=yes
# audio settings #
# Specify default audio driver (see -ao help for a list).
#ao=oss
# Use SDL audio driver with the esd subdriver by default.
#ao = sdl:esd
# Specify the mixer device.
#mixer = /dev/mixer
# Resample the sound to 44100Hz with the lavcresample audio filter.
#af=lavcresample=44100
# Output audio to S/PDIF
#ao=alsa:device=spdif
#ac=hwac3,hwdts,hwmpa,
# other settings #
# Pretend to be Window Media Player.
# Fixes playback when playlist and media file use the same URL.
#user-agent=NSPlayer/4.1.0.3856
# Pretend to be Quicktime
# Fixes playback for apple.com/trailers redirects
#user-agent="QuickTime"
# Pretend to be Realplayer SP
# Fixes playback for some video streaming sites
#user-agent=RMA/1.0
# Pretend to have lots of bandwidth
# Speeds up realmedia rtsp:// streams
#bandwidth=2000000
# Pretend to be Winamp
# Fixes playback of some NSV streams
#user-agent="Winamp NSV Player/5.12 (ultravox/2.0)"
# Drop frames to preserve audio/video sync.
#framedrop = yes
# Specify your preferred skin here (skins are searched for in
# /usr/local/share/mplayer/skins/<name> and ~/.mplayer/skins/<name>).
#skin = Abyss
# Resample the font alphamap.
# 0 plain white fonts
# 0.75 very narrow black outline (default)
# 1 narrow black outline
# 10 bold black outline
#ffactor = 0.75
# cache settings
# Use 8MB input cache by default.
#cache = 8192
# Prefill 20% of the cache before starting playback.
#cache-min = 20.0
# Prefill 50% of the cache before restarting playback after the cache emptied.
#cache-seek-min = 50
# DVD: Display English subtitles if available.
#slang = en
# DVD: Play English audio tracks if available.
#alang = en
# Profiles #
# The options declared as part of profiles override global default settings,
# but only take effect when the profile is active.
[protocol.dvdnav]
#vc=ffmpeg12,
#mouse-movements=yes
#nocache=yes
#[vo.vdpau]
#vc=ffmpeg12vdpau,ffwmv3vdpau,ffvc1vdpau,ffh264vdpau,ffodivxvdpau,
# Most video filters do not work with vdpau.
#vf-clr=yes
# OSD progress bar vertical alignment
#progbar-align=50
# You can also include other configuration files.
#include = /path/to/the/file/you/want/to/include
~/.mplayer/config
# Write your default config options here!
# [default] viene applicata a ogni file
[default]
# usa il server grafico X come video output
vo=xv
# usa alsa per l'audio output
ao=alsa
# ao=oss # Use OSS4
# decodifica multithreaded H264/MPEG-1/2 (valido: 1-8)
lavdopts=threads=2
# impostare il canale audio preferito (in questo esempio il numero sei)
channels = 6
# scala i sottotitoli al 3% della dimensione dello schermo
subfont-text-scale = 3
# non usa fontconfig
nofontconfig = 1
# aggiunge bordi neri ai filmati che non hanno lo stesso aspetto di forma dello schermo
# per wide screen monitors
vf-add=expand=::::1:16/9:16
# per non wide screen traditional monitors
#vf-add=expand=::::1:4/3:16
#profilo di up-mixing da due canali audio a sei canali
# use -profile 2chto6ch to activate
[2chto6ch]
af-add=pan=6:1:0:.4:0:.6:2:0:1:0:.4:.6:2
#profilo di down-mixing da sei canali audio a due canali
# use -profile 6chto2ch to activate
[6chto2ch]
af-add=pan=2:0.7:0:0:0.7:0.5:0:0:0.5:0.6:0.6:0:0
# Disabilita screensaver
heartbeat-cmd="xscreensaver-command -deactivate &" # stop xscreensaver
stop-xscreensaver="yes" # stop gnome-screensaver
ls /etc/modprobe.d/
alsa-base.conf snd-hda-intel.conf
etc/modprobe.d/alsa-base.conf
options snd slots=snd_mia,snd_hda_intel
options snd_mia index=1
options snd_hda_intel index=0
/etc/modprobe.d/snd-hda-intel.conf
options snd-hda-intel model=auto
cat /proc/asound/modules
0 snd_hda_intel
lsmod |grep snd
snd_hda_codec_hdmi 30162 1
snd_hda_codec_conexant 36759 1
snd_hda_intel 37000 2
snd_hda_codec 150305 3 snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_hda_intel
snd_hwdep 6340 1 snd_hda_codec
snd_pcm 77645 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc 7210 2 snd_pcm,snd_hda_intel
snd_timer 18726 1 snd_pcm
snd 59109 11 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore 5450 1 snd

Neburski wrote:
ryanjacobs wrote:So, apparently, your system cannot find the ALSA output driver. I suggest that you use a different driver than ALSA.
OP should first go through the wiki page of ALSA to ensure that his ALSA setup is working correctly. There aren't many sound setups that do not work under ALSA. If OP is relying on another sound setup then he should follow the appropriate wiki and tell us so.
@otto88: It would also help if you would try to explain what your intentions were. I'm assuming you merely want to have sound working and not configure some fancy setup. In that case you should just stick to a basic setup and follow the wiki step by step (don't skip any line and if you don't understand something, you figure that out or you ask people, don't just ignore it).
For instance I don't even have those /etc/modprobe.d/alsa-base.conf and /etc/modprobe.d/snd-hda-intel.conf even though I have 2 sound devices, while you seem to only have 1 sound device
otto88 wrote:cat /proc/asound/modules
0 snd_hda_intel
So your /etc/modprobe.d/alsa-base.conf in that case is totally unnecessary, let alone that you don't even have the snd_mia module loaded so why do you even configure alsa to load it at index 1. You aren't supposed to simply copy and paste the configurations from the wiki. Those configurations are merely there to give you an idea on how to make your own configuration.
When you have ensured that your sound is been set up correctly then you can start with the most basic mplayer configuration. You keep the /etc/mplayer/example.cong configuration file totally commented out (like you have atm) and your ~/.mplayer/config should only contain
ao=alsa
ok i just followed the wiki and your advices and doesn't work, yet
mplayer -ao alsa /dati/Musica/StudyDue.mp3
MPlayer SVN-r36498-snapshot-4.8.2 (C) 2000-2013 MPlayer Team
206 audio & 433 video codecs
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing /dati/Musica/StudyDue.mp3.
libavformat version 55.19.104 (internal)
Audio only file format detected.
Load subtitles in /dati/Musica/
==========================================================================
Opening audio decoder: [mpg123] MPEG 1.0/2.0/2.5 layers I, II, III
AUDIO: 22050 Hz, 2 ch, s16le, 32.0 kbit/4.54% (ratio: 4000->88200)
Selected audio codec: [mpg123] afm: mpg123 (MPEG 1.0/2.0/2.5 layers I, II, III)
==========================================================================
[AO_ALSA] Playback open error: No such file or directory
Failed to initialize audio driver 'alsa'
Could not open/initialize audio device -> no sound.
Audio: no sound
Video: no video
Exiting... (End of file)

I can't open wmv files with Lion. Windows media player doesn't work. Any suggestions?

Unable to open wmv files using Lion. Windows media player doesn't work. Are there any suggestions.
Thanks

Lynnie Marie ---
macfriedchikkin's reply would make sense to you if you were trying to open a camera, but if you are trying to view streming media from a web site that is a different story. It helps to be very specific about what you are tyring to do on these forums.
I belive you would go into Firefox Preferences menu and tell it to use VLC as the application to play WMV files. I'm still running Tiger, however, so I can't tell you if it the latest version works wel that way. The Tiger version doesn't seem to, but a lot may have changed since then. (I'm only just getting around to installing Leopard next week now that there are too may apps I can't run on Tiger. ) Perhaps someone else on this forum can better help you set up the player in your browser.
Or you can cut out the middleman and give VLC the direct video URL:
Choose Open File from the File menu and paste in the URL of the video, say,
http://azul.streamguys.com/auduboncal-1
or http://azul.streamguys.com/auduboncal-2
Your media should play this way. Dont forget to save the playlist for later.
I'l keep investigating on my end, and yes, I'm also encouraging certain people who are streaming windows media in to switching to a different format
Best --
G

CS4 doesn't work after LION installation

After the Lion installation i had several problems.
One of these is that the cs4 doesn't work.
i open illustrator or photoshop and they crash every time. "photoshop not responding" "illustrator not responding" and so on..
I had to reinstall all the suite that now works.
The question is... why??
I thought is is better to format the mac... should i do ?
thanks

Another problem is:
When I start the Dropbox Application, it uses nearly 90% of the CPU as well, so the mac heats up, in a way that it is not possible to use the dropbox application...
(The Icon of the VLC Media Player only jumps up and down in the dock, and nothing else happens)

Audio doesn't work after encoding

I have finished editing a video and gone to export it as a WMV and the audio doesn't work; there is just a buzzing noise.
The audio works fine on the timeline, but i just cannot export it.
Any ideas what's gone wrong?

Hi ATR, thanks for getting back to me. Here is all the info you required:
It's Premiere Elements 10 on a Windows 7 PC.
The source media is a mix of WMV, MP3 audio and JPGs.
The project settings are:
Editing Mode: DSLR
Timebase: 25.00 frames/second
Frame size: 1920 x 1080
Pixel Aspect Ratio: Square Pixels (1.0)
The export settings are:
Windows Media:
Presets: HD 720p 25
File type: Windows media
Frame size: 1280 x 720
Fps: 25
Audio settings: 440 kbps, 96kHz, 2 channel 24 bit VBR (I have tried it with a number of different variations on this and still had no luck)
I’ve tried opening with Windows media player as well as VLC. Neither are having it.

Apple DVD Player 5.4 Doesn't Work

I recently updated my MacPro to 10.6.5. Included in this update is a new version of Apple's DVD Player. The new version of DVD Player is 5.4. The installation package includes the application and an entirely new system framework to support it. Unfortunately, it doesn't work on my system.
As a reference point, my MBP is still running 10.6.4. It has DVD Player 5.2. It works great.
I'm unable to play DVD's or load a VIDEO_TS folder using the latest version of DVD Player on my MacPro. I didn't have any problems with DVD Player up until the Mac OS 10.6.5 update.
Further, VLC on my MacPro works fine. This problem exists for all users on my MacPro.
I tried to reinstall DVD Player 5.4 using Pacifist, but there was no change. I dl'd the 10.6.5 package from Apple when I did this. I also tried to reinstall the 5.4.1 framework.
Has anyone else experienced this problem? Are there any known fixes, I prefer to use DVD player over VLC. Nothing against VLC, but DVD Player is a great app when it works.
Thanks!

Yea, I got to thinking about that after I posted. You're right, Boot Camp is safe.
What's very strange is I tried a LOTR DVD over the weekend and it played fine. Thinking it to be a fluke, I tried another ... this time Elf. It worked. I then tried playing from two different VIDEO_TS folders on my HD. They worked too.
I can't explain it. I tried to surgically remove all of the key video player components (including the framework). I then reinstalled these files using the 10.6.5 combo update. No change. I then restored these files using Time Machine (I didn't want to risk messing something else up as there are quite a lot of dependencies stitched together via symlinks at the framework level).
So I should've been back to where I started. A few days later, everything appears to be working.
I have no answers, but I'm glad to have my DVD Player back.
This is off topic, but I also solved a problem I've been having with my mouse for YEARS. I had problems with the Mighty Mouse and later the Magic Mouse on my MacPro. I thought it was my desk. That is, I thought the surface of my desk was causing tracking problems. Very annoying tracking problems. I know, I should've considered bluetooth, but I didn't. To be honest, I wasn't experiencing any other bluetooth related problems so I really thought it was my desk. This problem became unbearable when I was working in Maya last week so I started researching mouse surfaces and mouse pads again (ha!). I inadvertently found this obscure PDF via google. It was written by some guy who was having the same problem 2-3 years ago. Following this guy's procedure, I cracked open my MacPro and moved three difficult to reach wires. Now my Magic Mouse is as smooth as glass. As is my older Mighty Mouse. It turns out that my Airport and Bluetooth modules were wired incorrectly at the factory in China. Honestly, this has been screwed up since 2007. Apparently, this has happened to quite a few people though I never heard about it until now. It would've been nice if Apple would've published something when they discovered they had shipped units with incorrectly wired Bluetooth modules! (if they did, I've yet to find anything from them on the subject). Whatever, I'm glad to have my MacPro's mouse working properly.

Can anyone help? I have downloaded and installed the QuickTime MPEG-2 Component but it doesn't work.

I purchased the QuickTime MPEG-2 component for Quicktime as I am using Snow Leopard (10.6.8) and I want to be able to via MPEG-2 transport streams.
I paid £14.00 - everything downloaded and installed fine but it doesn't work and I am still unable to view the transport streams in Quicktime even though according to the website this is want the component will let me do.
I have rebooted several times, reinstalled both Quicktime and the MPEG-2 component and still nothing. I have then spent ages going around and around in circles on the website trying to find a way of emailing customer services or technical support to get some assistance but I just always end back in the same place no further forward.
Please can anyone else offer any suggestions - either how I can get it working or how I can get my £14 back from Apple!!

I purchased the QuickTime MPEG-2 component for Quicktime as I am using Snow Leopard (10.6.8) and I want to be able to via MPEG-2 transport streams.
I paid £14.00 - everything downloaded and installed fine but it doesn't work and I am still unable to view the transport streams in Quicktime even though according to the website this is want the component will let me do.
1) Suggest you reread the "Feature" details for the QT MPEG-2 Playback Component paying particular attention to the paragraph titled "Can transport streams be played?" which clearly states that this codec does NOT support the playback of transport stream (TS) files.
2) This codec can only be used with "classic" QT apps such as the QT 7 player, GarageBand, or third-party apps like the free MPEG Streamclip app.
3) The VLC player intrinsically supports TS files. MPEG Streamclip with the QT MPEG-2 Playback Component installed supports TS file playback.
4) MPEG Streamclip with the QT MPEG-2 Playback Component installed can also resave muxed TS file content as muxed program stream (PS) content which is then "playback" compatible with both QT 7 and QT X players (assuming you select an audio compression format compatible with both) or convert the muxed TS content to QT "edit" compatible compression formats if desired.
Please can anyone else offer any suggestions - either how I can get it working or how I can get my £14 back from Apple!!
Apple seldom makes refunds to people who successfully purchase software which they do not really understand how to use—cavaet emptor. It is difficult to make suggestions here without knowing more about your personal preferences and/or work flow requirements. I personally would keep the codec to enhance various playback, conversion, and editing options on my Mac.

I just installed Maverick to my imacG5 and now my Office 2004 doesn't work??

I just installed Maverick to my imacG5 and now my Office 2004 doesn't work?? Where do I go from here??
Thanks.

You have given us inaccurate info about your iMac.
The G5 iMac is all white and runs a IBM Power PC (non-Intel) CPU that cannot run any OS X version above OS X 10.5.8.
OS X 10.6- 10.9 all run on much newer Intel CPU iMacs that have aluminum enclosures.
Typically, mid-2007 models and later.
The iMac model you described can't possibly run OS X 10.9 Mavericks.
Please download, install and run Etrecheck.
Etrecheck is a small, unobstrusive app that compiles a snapshot of your entire Mac hardware system and all installed software.
http://www.etresoft.com/etrecheck
Copy/paste and post its report here in another reply thread so that we have a complete profile of your Mac's hardware and installed software so we have accurate information about IMac to help both you and us begin to troubleshoot and solve the performance and technical issues with your Mac running OS X 10.9 Mavericks.
Thank You.

ITunes 9 and Dolby 5.1 AC3 pass through doesn't work

I know that this is an old question. But for me, it still doesn't work. I can pass through Dolby Digital to my 5.1 Home Theater system in VLC Player or EyeTV without any problems. However, in iTunes it still doesn't work. When I select the surround audio track of movies purchased from iTunes, I get no audio at all or a completely silent Dolby 2.0 or 5.1 track. But I didn't manage to get real 5.1 sound. I tried to set the digital output to "Encoded Digital Audio" and selected 48 kHz which should match the right setting for movies. But it still doesn't work. What can I do? Thanks for your help!

Re Checked it.
Only AAC stereo tracks on bought movies are 44,1 kHz.
AC3 tracks are 48 kHz.

Vlc : snapshot doesn't work

Similar Messages

Maybe you are looking for