VLC sound has static

Recently, I think after the most recent kernel upgrade, VLC has had audio static in all the videos I play. These same video files will not have the static if they are played with MPlayer. Running VLC from the terminal shows no errors. Any suggestions on how to fix this, or any others with a similar problem?
Last edited by justin (2007-12-13 05:44:23)

Allan wrote:
justin wrote:Xvid.
Surely thats the video...
Ya, that was dumb. Mpga is the audio codec.

Similar Messages

  • Sound has static when dongle is connected.

    Whenever I connect my dongle the sound contains a lot of static and sometimes even videos slow down. This problem persists even when I wear a headset. I am unable to watch any videos online. However when I remove my dongle the sound becomes normal and their
    is no problem. This doesn't happen when I connect other USB devices.
    Please can someone provide a solution?

    You must provide details about your "dongle" before anyone can recommend any solutions
    What is the exact make, model, and series of the dongle causing this problem?
    Have you contacted the manufacturer of the dongle for assistance with this problem?
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

  • Video audio has static

    I just recorded a 6 minute song at a concert last night and it has static sound throughout. I never had this problem before. Any suggestions?

    Hi roygbiv28,
    You will typically get static when the sound or music you are recording is too loud. The BlackBerry® smartphone's microphone, as with all microphones, have limitations on decibel levels.
    Thanks.
    -CptS
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • My audio/sound has been erratic for a while and now I have no output Help!

    My audio/sound has been erratic for a while, both output and input, sometimes one would worked but not the other and sometimes both would be none excitant.
    System preference does not show what I have connected aka external speakers or headset and the sound output in menu is grayed plus the output on system preferences output as well, sound input looks ok now.
    Had Tiger, so I upgraded to Leopard to see if that would helped, Output use to come back after a while, however now input works but output hasn't worked for days, I can hear sound when I am rebooting or starting the computer, but its gone right after.
    Since the Mac its fame for their audio stability, no ones seem to know how to solve the problem, so I am kinda desperate.
    I have tried the following; ran repair permissions, looked for fluff lol!....still cannot fix the glitch. Any new ideas please!!
    Thanks in advance!

    Since the problem existed before installing Leopard, it is clearly a hardware problem. Updating a broken system does not fix it, in fact many times it makes it worse or at least harder to diagnose.
    I suggest you repost in the appropriate hardware forum - in your case the G4-17 forum(s) here:
    http://discussions.apple.com/forum.jspa?forumID=1022
    and the general G4-17 forum here:
    http://discussions.apple.com/category.jspa?categoryID=138

  • HT1533 my sound has stopped working i have speakers plugged in but computer doesnt register or recognize them. the volume is on mute and grayed out ...will not let me change,what can i do to fix this problem....i have tried unplugging and plugging back in

    my sound has stopped working i have speakers plugged in but computer doesnt register or recognize them. the volume is on mute and grayed out ...will not let me change,what can i do to fix this problem....i have tried unplugging and plugging back in and reset and headphones...nothing works..how do i get my sound back?

    OS X Mountain Lion: If you can’t hear sound from your speakers
    Read the "If you’re trying to listen through external speakers" section.

  • Satellite C650 sound has stopped working

    I've had my laptop for about 6months and have had no problems with the sound until now.
    I have recently done a windows update and a few hours after my sound has stopped working completely.
    I have updated the driver (Conexant Cx20671 smart audio hd) after that failed i un-installed and reinstalled the driver off the toshiba downloads, after restarting again no sound.
    When i have media player on, the sound mixer recognizes there is something playing but there is no sound coming out the speakers
    _*please can someone help!!!*_

    Ok, this means that the sound driver is OK.
    Please go to the control panel -> sound -> Playback tab
    Here you have to check if the speakers are set as default device.
    Furthermore mark the speakers and click on settings button.
    There you can also check the volume level.

  • My sound has recently gone on my Iphone4s, this only happens when I use my phone myself. The sound works when I receive calls and texts but I am unable to watch videos, listen to music etc it seems like my volume button has gone! Can anyone help??

    My sound has recently gone on my iphone4s, this only happens when I use my phone myself. The sound works when i receive a call or a message etc but I am unable to watch videos or play music, the sound also doesn't work on games. Please can anyone help with this issue or let me know how to fix it if experienced the same problem?

    Remove all apps from multitasking bar. Double click Home button then tap and hold an icon and tap on little x on every app. Then reset. Hold down Home and Power button until Apple logo appears.

  • I've installed the latest ios 6 however, the sound has gone from all programs , music , youtube any help iPhone 4, iOS 6

    I've installed the latest ios 6 however, the sound has gone from all programs , music , youtube any help
    iPhone 4, iOS 6
    The ringtones are working but all other sounds are not working please help

    I had this problem on my iPod Touch 4g. Just press the home and sleep button. Wait and it will give an iTunes and cable logo. Now you can put in DFU mode (Hold Sleep and Home button 10 seconds and then release the power button kand keep pressing on the home button.) Now you will be able to restore it in iTunes.
    If you didn't sell it in al this time

  • RfcAdapter: receiver channel has static errors: can not instantiate RfcPool

    HI,
    While transferring the project from SAP system to PRIMVERA (third party system) system, iam getting the following error:
    com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.adapter.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.adapter.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=192.168.215.138 SYSNR=02 GWHOST=192.168.215.138 GWSERV=sapgw02 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '192.168.215.138apgw02' not reached TIME Sun May 01 06:10:03 2011 RELEASE 710 COMPONENT NI (network interface) VERSION 39 RC -10 MODULE nixxi.cpp LINE 3133 DETAIL NiPConnect2: 192.168.215.138:3302 SYSTEM CALL connect ERRNO 10060 ERRNO TEXT WSAETIMEDOUT: Connection timed out COUNTER
    experts, kindly help me out in resolving this issue.
    Regards,
    Sai

    partner '192.168.215.138apgw02' not reached
    Well if you ask me, theres something seriuosly wrong with above "partner", review the config of the RFC/JCO,
    also you could add more details as above info on its own is not enough to give you and objective answer
    Regards
    Juan

  • Sound has no valid device sound path although exporting device sounds was requested in the export settings. This sound will be ignored.

    I have bopped around the forums here for a while now, and while other people seem to have had the same problem as I am having in the past, I come to find that all of the solutions that have worked for others, do not in fact, work for me.
    I am running Flash Professional CS6 On an Acer Aspire. 4 Gigs of RAM, 500 Gigs of HD.
    The exact problem that I am having is as follows:
    I record a sound bit in Audacity, Export the sound as and MP3 File on my main computer Hard Drive.
    go to File>Import>Import to Library, I locate the file that I had created, then select it to be imported to my Library.
    I then create a new layer in my timeline, Label it as sound, place a new key frame into the timeline layer at the place in the animation that i hope the sound would start, set the audio sync to stream instead of event, then press CTRL+ENTER, which initiates the Test Movie function.
    At this time, the "Output" box Pops up and it states,
    "Sound has no valid device sound path although exporting device sounds was requested in the export settings. This sound will be ignored."
    No sound is played and i cannot, for the life of me, figure out why. I have tried all the troubleshoots that i can find online. I checked the publishing settings and nothing is being Overridden, I've attempted to untick the "export device sounds" option, but it is grayed out and cannot be toggled. I have attempted switching the MP3 format sound clip to a WAV format sound clip. I have attempted to re-recording the sound clip and re-importing the clip to the library. I have checked my computers speakers and everything is in working order and i have even checked to see if other projects sound works.
    I pulled up a previous project that i had finished a while back that had loads of sound imported the exact same way and it all works exactly as i expect it too. The sound plays, there is not "Output" box claiming an issue. It seems that the issue, whatever it might be, is stuck to this project itself.
    I have even started a new project, imported and placed both the MP3 and the WAV files into the sound layer created, CTRL+ENTER, and it works just fine without problem.
    If there is anything that i might have accidentally messed up in this projected that you know about, like settings that may have been changed that would cause such an annoying and seemingly unfixable issue, please let me know. I really do not want to loose this project over such an utterly stupid error.

    I've moved your question to the Flash Pro CC forum.

  • HT4623 I've installed the latest ios 6 however, the sound has gone from all programs , music , youtube any help

    I've installed the latest ios 6 however, the sound has gone from all programs , music , youtube any help

    Until you have tried Maps, Music, etc. first hand, I wouldn't formulate negative opinions about them. And updates, if performed correctly, do not erase data.
    I presume that last time you updated through iTunes. This time, update over Wi-Fi by going to Settings > General > Software Update.

  • Ever since I downloaded iOS 7 my music and video sound has been really bad quality what should i do

    Ever since I downloaded iOS 7 my music and video sound has been really bad quality what should i do??

    I had the same problem on my iPad v2 IOS 7. But it sorted itself after a hard reset (power and home button) followed by a soft rest ( just  power) . I lost all sound at this point. Then restarted again with a hard reset.
    Hope that fixes your iPad v2
    Mo

  • The sound has failed on my hp pavilion dv6

    The sound has failed on my new HP Pavilion dv6 Notebook.  I have used the HP assistance and "tuned up" but no improvement.
    Can you help?

    Hi,
    Can you post back with the following.
    1.  The full Model No. and Product No. of your dv6 series notebook - see Here for a guide on locating this information.
    2.  The full version of the operating system you are using ( ie Windows 7 64bit ).
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Elitebook 2540p: Faint sound and static coming from speakers...Need Help!

    I am having issues with my new 2540P. I can hear faint sound and static coming from my speakers as well as my headphones when I plug into the jack.  I first started having this issue when I plugged additional speakers into the jack and USB while talking on Skype..
    I am running Win7. I tried troubleshooting drivers and hardware, disabling and enabling, and a system restore going back one day...but no luck. When I disable the speakers, I stopped hearing even the faint sound. I also tried plugging and unplugging the jack 20 times. 
    Is it possible that this is a hardware failure (jack and/or sound card)?
    Does anyone have other suggestions?

    I am running XP and have same problem.  Sound now gone after "pop".  Customer services suggests hardware failure and send back to factory.  Flashing BIOS and updating IDT audio driver will not fix the problem.
    Possible speaker failure or audio chip failure.

  • Help, please.  My iMac sound has gone all stat·ick·y The Video won't play correctly or at all.  I have a Model Name:     iMac   Model Identifier:     iMac12,1   Processor Name:     Intel Core i5   Processor Speed:     2.7 GHz  I am running OSX 10.6.8

    Help, please.  My iMac sound has gone all stat·ick·y The Video won't play correctly or at all.  I have a Model Name:
    iMac   Model Identifier:
    iMac12,1   Processor Name:
    Intel Core i5   Processor Speed:
    2.7 GHz  I am running OSX 10.6.8

    So just to be clear on a few things:
    Should partitioning the hard drive not work is it undoable?
    Will this have any impact on doing a complete erase and reinstall and will that restore it back from the process?
    Is there a limited amount of space that makes this process ineffective?
    I have never had to do this sort of thing so I just want to be sure I don;t wind up in the dog house *)
    Thanks again

Maybe you are looking for

  • Apple LED 24" Cinema Display audio problem under 10.6.8 (with post fix)

    Hi all, I'm using an Apple LED 24" Cinema Display with a 2010 MBP 15" and had been using 10.6.8 without problem. After installing the post-fix I now get static noice on (clipping?) when music contains lots of base. If I switch the output to my MBP's

  • Embedding html from youtube no longer works

    embedding html from youtube no longer works??

  • Handling multiple receivers

    Hi team, I have a requirement to add another receiver to the existing scenario. sftp - xi - file. Here I have to add another receiver to get the same output. mapping is same and the output file which the first receiver is receiving , the same the sec

  • P1102w input tray doesnt seem to work

    I have two laptops that connect to my home network which my HP P1102w is also connected on. The laptops both run Windows 7. If I try to prin t anything now, the paper does not seem to be taken in via the input tray. It sounds like its trying to suck

  • Restoring Backup Error

    I just decided to finally update my iPhone 3G software to the iOS 4.1. I backed up my existing iPhone data, installed the new OS, and now when I try to restore from the backup, I keep getting messages like "iTunes was interrupted while restoring the