"VLD-2750: Missing update matching criteria in TARGET_TABLE"

Re: "VLD-2780: Unable to generate Merge statement". ( In Reply To : Re: "VLD-2780: Unable to generate Merge statement". ) Sep 3, 2004 2:37 PM
Reply
Jean Pierre,
I changed the logical key to the setting you said and I am able to see the merge statement, however when I do the validation I am now getting :"VLD-2750: Missing update matching criteria in TARGET_TABLE".
Any ideas?
Thanks,
AK

There are two ways of matching incomming rows with rows present in a target table during updates. One is to use the key constraints. You can see this by inspecting the target object properties in the mapping and checking the 'Match by constraint' parameter. This is recommended in case you have defined key constraints on the target objects.
The other (if match by constraints is set to 'no constraints') is to set the Match Column when Updating to yes (and conversely, Load Column when Updating to 'No') for individual columns that have to be matched (as sugested above).
If you get the VLD-2750 message, it means that one of the target objects does not have any matching criteria set for updates. In an insert/update mapping you should use either the first or the second matching method for all your target objects.
Regards:
Igor

Similar Messages

VLD-2750 Misseng updata matching criteria in TABLE_NAME

Hi,
I am trying to create map that populates a fact table. I choose the option INERT/UPDATE. I can't deploy this map because of this error.
Thanks in advance,
Catarina Chaves

To update a row in the target (since you selected INSERT/UPDATE) you need a matching criteria to check whether the incomming row exists in the fact table. This criteria must either be defined with 'Match by constraint' if you have defined key constraints in the source and target modules (primary and foreign keys), or by setting a field in the target table property 'Update use for matching' to yes.
In other words, how can owb know which rows from the input data set to use for insert and and which to use for update? There has to be a criteria that will mark an incomming row as existing in the fact table (in this case, an update will be performed) or new (in this case an insert will be performed).
It seems that you have not defined the parameters setting this criteria and therefore you cannot deploy your mapping.
Regards:
Igor

VLD-2754 - attributes of update matching criteria are not mapped

For some reason, when we define a cube that uses a particular dimension, the mapping always fails with the error:
"If an attribute is used in the matching criteria but is not mapped, then the matching condition cannot be determined. For the attributes (DIM_CT) to be used for matching, they must be mapped for TEST_CUBE. To deselect an attribute as a matching criteria, set Update Use For Matching to No."
I can't seem find an option for Update Use For Matching. On my source table, I have some options for matching keys but I don't understand exactly how that pertains to the mapping target.

Hi,
You must be dealing with an update, upsert or insert update mapping here. Check the attribute properties of the fields on your target table. You should find the 'Update Use For Matching' property there.

Auto-reconcilitation Missing matching criteria

Hi,
In oracle apps 11i , manual reconcilation for bank statements is done by the user. On the attempt to try Autoreconciliation program the statement lines had the error"Missing matching criteria " in the AutoReconciliation Execution Report.
I have found in the cash mangement user manual the following:
The statement line needs at least one of the following criteria to
match, and all are missing: 1) transaction number; 2) invoice
number and agent name; 3) invoice number and agent bank
account.
But I do not know how to do any of the 3 points above because the bank statement lines entered either manually or uploaded through the interface consist of the following information only:
POST DATE, VALUE DATE , DR AMOUNT , CR AMOUNT,and BANK TRANSACTION CODE
What do we have to do to use the auto-reconciliation program?

Hi,
We can request bank to provide us information of Transaction number.
Say a Cheque pmt or receipt is cleared by the bank, the reference of Chk is captured by Bank. These numbers shall be available to you on request along with Bank Transaction Code.
Regards
Sridhar

OWB VLD-2750 error

Hi!
Could someone please help.
I am geting a VLD-2750 error in a MAPPING .. as I have specified an update in theloading specifications of the table.
It needs a where clause! ? .. where do I put this where clause?
In the Mapping table properties,in the conditional loading section, I am doing a match by constraint .. is it becuase of that! .. Please Help!
Kind Regards
Saif

Saif,
Yes, the where clause is generated from the "Match by constraint" property of your target table. It is inherited from a primary key or a unique key of the target. Most likely you don't have a primary/unique key defined on your target table. In order to find out, open the target object in an editor, select table properties from the menu and check out the constraints.
If you change the table in the editor, make sure you do a reconcile inbound on the mapping object in order to get the latest definition of the object in your mapping.
Nikolai Rochnik

Invoice Verification - GRIV and standard R3 matching criteria

Hi,
I am asking what I think is a straightforward question, but has proven difficult to answer so far!
My organisation is reviewing our SAP R3 invoice match criteria, but first we need to establish what they are.
Is SAP standard GR-IV invoice verification as simple as:
1. PO number matches the one on the invoice
2. GRN quantity is less than or equal to invoiced quantity
3. PO line item price is more than or equal to invoiced quantity, or within our tolerance
4. Delivery note number on GR needs to match the one on the invoice
Are there any other fundamental matching criteria that we may be missing?
In addition, we are considering turning off the GRIV flag for certain types of vendors (those providing us with services, for which match criteria 4. above will never match due to there being no delivery note). What are the differences in matching that will occur if we do this? - I have not been able to establish from my research whether a Goods Receipt is still required for the invoice to match if GRIV is turned off, for example...
Thanks,
Peter

This calls for ABAP support .... if you are really interested to it on your own ... try SAP Query that should help you out ... Cheers !!!
Check out this step by step guide
http://www.scribd.com/doc/7071503/SAP-Query-Step-by-Step-Guide-12Aug2008
Edited by: m_n_novice on Aug 12, 2009 2:24 PM

Update (0 new / 0 changed) Warning received Message Missing Update Finished

The FULL load is running for long time and after some time it fails with processing Overdue. ( It is loading directly into datatargets no PSA as this is Daily FULL load to cube, deleting the previous request) The job overview is successfully finished in source system.
While load running in details tab under processing..
1)Data Package 6 ( 7407 Records ) : Missing messages -->
2)Update ( 0 new / 0 changed ) : Warning received
3)Message Missing: Update Finished for Cube
4)Processing end : Missing messages .
When clicked on helpnode on each step:-
1)Data Package
A data packet is either sent with transfer method IDoc or PSA to BI. You have the option here of viewing the data received and of editing it where necessary, of posting the data packet in simulation, and of canceling in simulation, and, if it has not yet been posted successfully, of starting the update manually.
2)Update
See also Data packet processing steps
By this the persistent saving of data is understood in its final target object
3)Processing Message
see also Data Packet Processing Steps
Single message from the processing of a data packet. Some messages contain references to application logs or other requests. The monitor then allows corresponding jumps.
4)Processing End
see also Data packet processing steps
If the processing of a data packet has been finished then any error messages for each process in the step up until this point are delivered to the monitor and to the called program (in the case of transferring by IDoc thus to the IDoc management). If no errors arose then a success message is logged per process.
Messages from source system
see also Processing Steps Request
These messages are sent by IDoc from the source system. Both the extractor itself as well as the service API can send messages. When errors occur, several messages are usually sent together.
From the source system, there are several types of messages that can be differentiated by the so-called Info-IDoc-Status. The IDoc with status 2 plays a particular role here; it describes the number of records that have been extracted in a source system and sent to BI. The number of the records received in BI is checked against this information.

Hi
Try to transport the request again and check...
Perform the consistency test with 'RSRV'...
Check notes in this link if they could help u....UNCAUGHT_EXCEPTION
Regards
Gaurav

SUS - not only missing updates, but also hiding some...

Hi *,
i have the same problem with OSX SUS on 10.6.2 as described in several threads within this forum... with some add-on: not only that SUS is missing some of the updates available on Apple's public SUS service, it seems that at least one of the missing updates shows up in an intermitting way.
In Server-Admin / Software Update Service / Updates the package "Final Cut Server Update" V1.5.1 of 11/24/09 does not appear on the list of available updates, unless i press the tiny rescan button which is located just below the list of update package. When i press it, the "Final Cut Server Update" appears immediately on the list. BUT it doesn't show up persistently -> when i switch in Server Admin over to another Service, e.g. SMB, and toggle the scope back to SUS, then all the packages which had been shown before toggling are displayed again, except that "Final Cut Server Update" is missing again.
Really weird behaviour... hope that Apple fixes that soon, SUS is one of the major reason's why i'm running a MacMini Server @ home - i'm sitting with four Macs on a tiny network connect.
Regards, KS

I'm with you on this. Have really tried to get SUS running as I can really see the benefit, including resetting it completely several times.
Thought I had it working, but now realised that even though the latest version of Safari 4.0.4 is downloaded and enabled, clients are reporting they are up to date (They have Safari 4.0.3).
The OS 10.6.2 update downloaded correctly - so why not this?
There are some serious flaws with SUS. Even the way you have to specify the server path is wrong if you ask me. Why can't there be a browse button? Why do you have to remember / look up what the correct filename is for the sucatalog depending on the OS version. Seems rather clunky to me.
Andrew

My computer froze during match initial formatting. Now some songs are uploaded others are "greyed out." If I go song by song, I can update match. How can I do this all at once and also update album art?

My computer froze during match initial formatting. Now some songs are uploaded others are "greyed out." If I go song by song, I can update match. How can I do this all at once and also update album art?

Hi gdogk,
If there was an interruption during the initial iTunes Match process and you are now having issues with playback and album art, you may find the troubleshooting steps outlined in the following article helpful. In particular, you may want to turning iTunes Match off, then back on again, as noted here:
If iTunes Match is already enabled on your computer or device, try turning iTunes Match off and then on again.
Mac: While holding down the option key, choose Store > Turn Off iTunes Match.
Turn iTunes Match on by selecting Store > Turn On iTunes Match.
Windows: While holding down the shift key, choose Store > Turn Off iTunes Match.
Turn iTunes Match on by selecting Store > Turn On iTunes Match.
How to troubleshoot iTunes Match - Apple Support
Regards,
- Brenden

Missing selection screen criteria

hi all,
I have a interesting problem about report criterias.I have a bi report query with four criterias one of them 0curtype ( because report have currency type conversion ) . Problem is that ; in our tests system I see four criterias but in production i see three. i cant see 0curtype in Query designer and portal report when i run query but also 0curtype has a value (TRY) . I mean report has four criterias , but 0currtype is invisible and it has value ,i cant see it . 4 days ago report was same on both systems. but now its different.
please help. how can i see the missing and invisible criteria.

Hi Hasan,
Just Check that Variable for Currency Type has been transported to production System properly.
Go in RSA1 there, Transport Connection in that select Object Type, in that Query Element under that you will have variable option.
Search for that specific variable..
if it is there, Check for Authorisation of variable for that.
Regards,
Rajdeep.

Update Retriever missing update for S30 Model Type 4351

Update Retriever missing update for S30 Model Type 4351. Missing update for Nvidia External VGA Driver Version 321.01 for Windows 7 (64-bit), Windows 8 (64-bit) - ThinkStation S30, D30. Retriever only lists udpate for AMD external VGA driver. This model shipped with Nvidia Quadro K2000 graphics card.

Sorry for the delay. Working through some internal issues regarding content support for ThinkStation. Trying to get the content updated and released as soon as possible.
I believe the driver you are looking for has been replaced by the following:
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS028285
Note: the readme shows a more complete list of supported adapters

Write-Progress in PowerShell script for installing Missing Updates

Hi, I had a previous question here
https://social.technet.microsoft.com/Forums/windowsserver/en-US/88931488-3b2c-4c08-9ad3-6651ba9bbcef/action?threadDisplayName=progress-indicator-for-installing-missing-sccm-2012-r2-updates
But that method is not working as expected. The progress bar displays then continues to increment past 100 throwing an error each time.
I'm thinking I could use a foreach loop for the missing updates but I'm just lost when it comes to Powershell syntax.
For example:
# Get the number of missing updates
[System.Management.ManagementObject[]] $CMMissingUpdates = @(GWMI -ComputerName $server -query "SELECT * FROM CCM_SoftwareUpdate WHERE ComplianceState = '0'" -namespace "ROOT\ccm\ClientSDK") #End Get update count.
$result.UpdateCountBefore = "The number of missing updates is $($CMMissingUpdates.count)"
#Install missing updates.
#Begin example code, not tested.
Foreach ($update in $CMMissingUpdates)
$i++
If ($CMMissingUpdates.count) {
$CMInstallMissingUpdates = (GWMI -ComputerName $server -Namespace "root\ccm\clientsdk" -Class "CCM_SoftwareUpdatesManager" -List).InstallUpdates($CMMissingUpdates)
Do {
Start-Sleep -Seconds 15
[array]$CMInstallPendingUpdates = @(GWMI -ComputerName $server -query "SELECT * FROM CCM_SoftwareUpdate WHERE EvaluationState = 6 or EvaluationState = 7" -namespace "ROOT\ccm\ClientSDK")
#end my example code.
#The code below is working to install updates but Write-Progress isn't.
If ($CMMissingUpdates.count) {
#$result.UpdateCountBefore = "The number of missing updates is $($CMMissingUpdates.count)"
$CMInstallMissingUpdates = (GWMI -ComputerName $server -Namespace "root\ccm\clientsdk" -Class "CCM_SoftwareUpdatesManager" -List).InstallUpdates($CMMissingUpdates)
#Set the missing updates to variable for progress indicator.
$updates = $CMMissingUpdates.Count
$Increment = 100 / $updates
$Percent = 0
Do {
Start-Sleep -Seconds 15
[array]$CMInstallPendingUpdates = @(GWMI -ComputerName $server -query "SELECT * FROM CCM_SoftwareUpdate WHERE EvaluationState = 6 or EvaluationState = 7" -namespace "ROOT\ccm\ClientSDK")
#Not 100% sure $result.UpdateCountBefore is needed below.
$result.UpdateCountBefore = "The number of pending updates for installation is: $($CMInstallPendingUpdates.count)"
Write-Progress -Activity "Updates are installing..." -PercentComplete $Percent -Status "Working..."
$Percent = $Percent + $Increment
} While (($CMInstallPendingUpdates.count -ne 0) -and ((New-TimeSpan -Start $StartTime -End $(Get-Date)) -lt "00:45:00"))
Write-Progress -Activity "Updates Installed" -Status "Done" -Completed
} ELSE {
$result.UpdateCountAfter = "There are no missing updates."}
$result

The increment should be 100 / (max number of items)
That will not exceed 100 through (max number of items ) iterations in a loop
Mathematically that can be written as
100 / (Max Number of items) * (max number of items ) iterations in a loop
= 100 * ( (Max Number of Item) / (Number Iterations in a loop) )
= 100 * 1 = 100
The (max number of items) and (Number of Iterations in a loop ) need to be based on the same number.
In the script, it is not based on the same number.
The maximum number of items is $CMMissingUpdates.Count
The number of iterations in the loop is based on the condition
($CMInstallPendingUpdates.count -ne 0)
Which causes the iterations of the loop to exceed $CMMissingUpdates.Count
Assuming the $CMInstallPendingUpdates.count is going down (is decremented) through the loop, then
$Increment = 100 /
$CMInstallPendingUpdates.count

Missing update features?

I got the newest version of Lightroom (5.7.1 (assured by image 1)) after reading about the new features (HDR and Panorama merge) in the update window (shown in image 3).
BUT when clicking "Search for updates" I still get the same window (image 3) that originaly made me update. And as one can see, in image 2, there is just no "Merge" - option at all.
I'm looking forward to your solution.

Thanks a lot!
Von: dj_paige
Gesendet: Donnerstag, 23. April 2015 16:20
An: Matthias Wiesemes
Betreff: missing update features?
missing update features?
created by dj_paige <https://forums.adobe.com/people/dj_paige> in Photoshop Lightroom - View the full discussion <https://forums.adobe.com/message/7470467#7470467>

Trying to create a report that shows all 8.1 machines missing update 1 (KB2919355)

Currently I have a report that polls every machine that talks to our SCCM 2012 server and only displays Windows 8.1 machines.
I'd like to modify the code where it will only show the 8.1 machines that are missing Update 1. That way we can go through and patch the ones that need it. Is this possible?
The existing query looks like the following:
SELECT
SCCM_Ext.vex_R_System.Name0
,vMacAddresses.MacAddresses
,v_GS_PC_BIOS.SerialNumber0
,v_GS_COMPUTER_SYSTEM.Model0
,SCCM_Ext.vex_R_System.Operating_System_Name_and0
,v_GS_COMPUTER_SYSTEM.UserName0
FROM
SCCM_Ext.vex_R_System
INNER JOIN vMacAddresses
ON SCCM_Ext.vex_R_System.ResourceID = vMacAddresses.ItemKey
LEFT OUTER JOIN v_GS_PC_BIOS
ON SCCM_Ext.vex_R_System.ResourceID = v_GS_PC_BIOS.ResourceID
LEFT OUTER JOIN v_GS_COMPUTER_SYSTEM
ON SCCM_Ext.vex_R_System.ResourceID = v_GS_COMPUTER_SYSTEM.ResourceID
WHERE
SCCM_Ext.vex_R_System.Operating_System_Name_and0 like '%6.3'
ORDER BY SCCM_Ext.vex_R_System.Name0

Here is the code I use to pull 64bit machines that don't have CU1 (BTW cu2 is now out):
select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SY STEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM .Client from SMS_R_System inner join SMS_G_System_SMS_ADVANCED_CLIENT_STATE on SMS_G_System_SMS_ADVANCED_CLIENT_STATE.ResourceID
= SMS_R_System.ResourceId inner join SMS_G_System_COMPUTER_SYSTEM on SMS_G_System_COMPUTER_SYSTEM.ResourceID = SMS_R_System.ResourceId where (SMS_G_System_SMS_ADVANCED_CLIENT_STATE.DisplayName = "CCM Framework" and SMS_G_System_SMS_ADVANCED_CLIENT_STATE.Version
!= "5.00.7958.1203") and SMS_G_System_COMPUTER_SYSTEM.SystemType = "x64-based PC"
Minor mods to this or your code should do the trick.
...I see you're talking an update to the OS, rather than SCCM update. Still hopes this helps.
Ben JohnsonWY

When I downloaded I tunes and bought Match all 3 of my computers synced. Now I download a song from Amazon into Media player or burn a cd and they are not syncing with the other computers. I update match and have my boxes checked in preferences.

When I originally downloaded i tunes and bought match all 3 of my computers synced. Now when I download a song from Amazon into media or burn a cd into media they are not syncing. I go in and update match thinking that might work, it hasn't. I have all of my boxes checked in preferences on all 3 computers.

Yes i've tried all of that. I've turned it all the way on and off and erased all of my music and put it back on and nothing works. And with the breaking up CDs and putting into compilation categories i have already fixed all of that stuff. It's fine it just doesn't show up in the list of artists. I can find the album in the songs category and the albums category it's just it doesn't show tha name of the artist. All of the other albums that i downloaded before i updated my itunes to th most recent update are fine. It's just the two that i downloaded afterwards. Thanks for trying though.

"VLD-2750: Missing update matching criteria in TARGET_TABLE"

Similar Messages

Maybe you are looking for