VLMOVE
Hello,
I am not familiar with HUM, but I have the next problem;
I want to move handling-unit xxxxxxxxx from location A to B within the same plant,
by using VLMOVE I want to create a delivery. but I get the message:
"HU xxxxxxx is in the warehouse, assignment only possible through transf. order"
Do I have to use LT09 in this case and if so, how do I create a delivery?
Any suggestion is helpfull and will be rewarded!
Hi Jan
The point is that you need a delivery where the HUs to be posted can be packed. As you know, packing cannot be reflected inside a material document. It is not possible to use LT06! LT12 must be for a TO created with LT03 because the TO confirmation will then update the HUs to the delivery. When the material document is created afterwards the HU status can be updated. You really need a delivery before the picking can be done.
Regards
Michael
Similar Messages
-
VLMOVE 321 with nested Handling Unit
Hi
I have the following situation:
- Handling Unit active
- WM active (with Storage Unit)
- QM not active
I have nested HUs:
.1 HU001
...2 HU002
......3 Material A, Batch B1, quantity 10 pcs in inspection stock
...2 HU003
......3 Material A, Batch B2, quantity 20 pcs in inspection stock
In WM, I have only HU001.
The first question is: Is possible to manage lower-level HU as Storage Unit in WM? I mean, can I have HU002 and HU003 as storage unit number instead of HU001 in WM?
The second is: when I try to post HU002 to unrestricted-use stock (with VLMOVE 321), SAP posts the higher HU in unrestricted-use stock, changing also the stock of HU003 (Material A Batch B2).
I don't want it because Batch B2 isn't inspected!!
I think that I could unpack HU001, posting change to HU002 and then repack, but this process is very time expensive and it should be done automatically by interface from an external LIMS.
Have you got any idea?
If I activate QM-IDI interface (with inspection lots), could it be possible?
many thanks
michi guys
Iu2018ve met this problem
*1 we just manage HU in highest level in WM
you just select the lower-level HU when you confirm TO. we don't need to unpack.
i just know this. share with you.
hope help to you. -
Problem in 301 Stock transfer via VLMOVE for Handling Unit movement
Hi Gurus
I am having one issue, where handling unit is active. So user facing one issues that user has posted the stock around 10 qty , after some material movements , stock showing as 9 in MMBE , where as checking the handling units showing 10 In HUMO . Now user wants to do the stock transfer 301 via VLMOVE. But system is giving error message like u201Cdeficit of stock, handling units can't be movedu201D, anybody advise is there anyway how user can do this transaction.
Regards
Edited by: venkat g on Aug 19, 2010 1:03 PMHi,
The solution for creating inbound delivery that you people have suggested is already in place. The problem is not with creation of inbound delivery but with assigning the material HUs to the inbound delivery. As material HUs are having status assigned to Shipment Document which is created after outbound delivery is processed. How should I go about it? Even after status of shipment document is made complete, assignment of HUs to inbound delivery is not possible. Please help to resolve this issue.
Thanks and regards,
Sudhir Dahake -
Hello,
I need solution for my customer process:
1. Step: I use transfer PO subcontracting with HU for row material to vendor for subcontracting process (Transaction vlmove )
2. Step: I perform GR for assembly product : goods issue from vendor stock and receive finish product ?
Is there any way of using HU for this process.
Regards>
Lior Shor wrote:
> Hello,
> I need solution for my customer process:
> 1. Step: I use transfer PO subcontracting with HU for row material to vendor for subcontracting process (Transaction vlmove )
> 2. Step: I perform GR for assembly product : goods issue from vendor stock and receive finish product ?
> Is there any way of using HU for this process.
>
> Regards
If you want to use handling units for transferring materials to subcontractor, you will have to use deliveries (delivery type LB). The handling units can be assigned to the delivery before PGI.
The delivery can be created via TCode ME2O. Make sure the following are maintained
- Sales views in material master
- Customer master with sales views assigned to vendor master
- Shipping point determination configuration.
During GR, handling units may be used as in the standard process.
Hope this helps.
Regards,
Aroop
Edited by: Aroop D on Jan 27, 2010 7:15 AM -
VLMOVE via HU_CREATE_GOODS_MOVEMENT
Hi expert,
I have to use function HU_CREATE_GOODS_MOVEMENT to execute VLMOVE (stock transfer from Quality Check TO free usable) but I can't find any documentation.
Where I can find an example to understand how to use this funciont?
Thanks.
SalvatoreHi expert,
I have to use function HU_CREATE_GOODS_MOVEMENT to execute VLMOVE (stock transfer from Quality Check TO free usable) but I can't find any documentation.
Where I can find an example to understand how to use this funciont?
Thanks.
Salvatore -
Hi !
I need one exit or badi on vlmove transaction, can you help me ???
Thanks.HI,
These are user exits:
Transaction Code - VLMOVE HU Goods Movements
Exit Name Description
V02V0001 Sales area determination for stock transport order
V02V0002 User exit for storage location determination
V02V0003 User exit for gate + matl staging area determination (headr)
V02V0004 User Exit for Staging Area Determination (Item)
V50PSTAT Delivery: Item Status Calculation
V50Q0001 Delivery Monitor: User Exits for Filling Display Fields
V50R0001 Collective processing for delivery creation
V50R0002 Collective processing for delivery creation
V50R0004 Calculation of Stock for POs for Shipping Due Date List
V50S0001 User Exits for Delivery Processing
V53C0001 Rough workload calculation in time per item
V53C0002 W&S: RWE enhancement - shipping material type/time slot
V53W0001 User exits for creating picking waves
VMDE0001 Shipping Interface: Error Handling - Inbound IDoc
VMDE0002 Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0003 Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0004 Shipping Interface: Message SDPACK (Packing, Inbound)
Rewrad points if this helps.
Manish -
hi all
when we use 321 in VLMOVE for transfer materials from inspection stock to unrestricted stock and when we have serial number for some materials system take error "Only 0 serial numbers entered instead of 2 "
how can i insert serial number for material in VLMOVE or how can transfer materials from inspection stock to unrestricted stock ? please guide me
best regardsVLMOVE is used to transfer handling units and expects the serial numbers already to be assigned, it doesn't provide any input to assign serial numbers. Usually, you assign the serial numbers in the Handling Unit during packing. In this case the serial numbers may not have been assigned in the handling unit at creation. If you want to use VLMOVE, then you first have to assign the serial numbers in the handling unit (transaction HU02).
I'm wondering why you try VLMOVE as usually you transfer materials from Inspection stock via the Inspection lot processing and not via direct IM movements, indeed your QM config may prevent this.
Regards
Richard -
Hello,
Our configuration is the following :
HU-1A level 1
HU-2A level 2
material 1 qty 1
HU-2B level 2
material 1 qty 1
Our HU level 1 has to be reused.
When we want to do an exit by scanning the HU-2A by using VLMOVE the
system uses the HU-1A instead and do the exit for all materials !!
So the only workaround for us is to depack first by using HU02 and then
using VLMOVE. As this takes too much time and it is quite complicated
for users, we have to do a specific for this which is quite complicated.
Is there any way to do the exit for the nested HU only ?
or there is a better workaround ? (badi, user exit?)
Kind regards,
Sébastien LAURENTI can suggest another way .. just check whether you can do this.
The material can be returned to inventory ( using reversal of the movement type by which the material is issued to project i.e. 282) and then issue to the project from the inventory.
Regards
Mani -
Hi
I have handling units in my WM warehouse. I use RF guns to receipt them in (against inbound delivery) and putaway and pick.
I want to be able to do a transfer posting to move product from unrestricted to blocked. Is it possible to get VLMOVE on the RF gun or anything similar?
Thanks.Hi,
You need to develop a custom RF Tcode using Function module ....
HU_CREATE_GOODS_MOVEMENT & Input
HUWBEVENT = 0022 Transfer posting blocked -> unrestr.
But your RF execution set up must be real time update.
1 more input. This functin module is copy of Transaction HUMO. Here you must selct HU than EDIT--> Change HU Posting.
This transaction helps to execute alost all scenarios.
NJOY
Hiren -
Hello HUM guru's.
I am not familiar with HUM, but I have the next problem;
I want to move handling-unit xxxxxxxxx from location A to B within the same plant,
by using VLMOVE I want to create a delivery. but I get the message:
"HU xxxxxxx is in the warehouse, assignment only possible through transf. order"
Do I have to use LT09 in this case and if so, how do I create a delivery?
Any suggestion is helpfull and will be rewarded!1
-
Simulate VLMOVE, Which FM/BAPI ?
hi all,
Which FM/BAPI can I use to simulate the VLMOVE transaction for HU? I'm Trying to process plant-to-plant transaction (301)for a HU.
Thanks.
Regards.
CarlosHi Carlos
Did you find a suitable FM/BAPI to simulate transaction VLMOVE ? I'm trying to process Transfer within plantbetween storage locations (311)for a HU.
Please let me know if you did find one.
Thanks
Ramya -
Cannot cancel 202 movement after 201 using VLMOVE
Hi,
I have dont 201 movement using VLMOVE. I have to cancel this movement since the Cost Center was wrong.
I tried 202 movement with MB1A, but get the error as "Document is incomplete: You cannot save the delivery".
Can you tell me how I can cancel this movement which has HU involved.
Thank YouHI Benu Mathew
What error message you are getting.?
Try to cancel Material Document in MIGO or MBST.
Reb,
Bhg -
Fixing 'process' value through several HUs in VLMOVE
Hi,
When you use VLMOVE to move several HUs to a storage location, after selecting the process (for example, 311), the storage location and the HU number and clicking enter, the HU is added to the list at the bottom part of the screen, and all the values (process, SL, HU) disappear.
In my scenario, since we have many HUs we need to move to the same SL using the same process (movement type 311) , we want to be able to add all the HUs without having to select 311 for each HU.
Is here a way to local the value of the process screen field?
Thanks,
YossiHi,
When you use VLMOVE to move several HUs to a storage location, after selecting the process (for example, 311), the storage location and the HU number and clicking enter, the HU is added to the list at the bottom part of the screen, and all the values (process, SL, HU) disappear.
In my scenario, since we have many HUs we need to move to the same SL using the same process (movement type 311) , we want to be able to add all the HUs without having to select 311 for each HU.
Is here a way to local the value of the process screen field?
Thanks,
Yossi -
Function Modules replicating Transaction VLMOVE.
Hi,
Are the FM's
MB_CREATE_GOODS_MOVEMENT
MB_POST_GOODS_MOVEMENT
relevant for transaction VLMOVE? Can someone please suggest which FM should I use for this transaction.
Thanks,
Rohit.Hi Ferry,
I tried running this FM. Provided it all the required data as the VLMOVE transaction is sending. But the FM runs without any message or changes. Also the importing field "ef_posted" returns value '0'. I think I should get a value of '1' to perform commit work.
Any thoughts? Have you used this FM before ?
This is the data I am sending to the FM --->
IT_MOVE_TO:
Matnr - 000000001000000131
Werks - 1070
Lgort - F500 (Destn)
GRUND - 0000
BWART - 311
HU_ITEMS - (Structure in it_move_to)
VENUM - 0000022625
VEPOS - 000001
TABIX - 0
QUANTITY - 0
G_EXIDV - 106130770000000742 -
i m writing one ALV grid report...in the ouptut i have placed one checkbox for FLAG field,which is an editable field at output...
fieldcatalog-fieldname = 'FLAG'.
fieldcatalog-seltext_m = 'Selection Flag'.
fieldcatalog-col_pos = 1.
fieldcatalog-outputlen = 14.
fieldcatalog-checkbox = 'X'.
fieldcatalog-edit = 'X'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
so,when i run the report i will get some 20 records...user will select any 10 records as i have placed a checkbox...i have placed one pushbutton 'DELIVERY' when user clicks that DELIVERY button with 10 selected fields..VLMOVE tcode needs to be called and deleivery needs to be posted...
WHEN 'DELIVERY'.
IF rs_selfield-fieldname = 'FLAG'.
READ TABLE it_FINAL INTO wa_FINAL INDEX rs_selfield-tabindex.
SET PARAMETER ID 'MAT' FIELD wa_FINAL-FLAG.
CALL TRANSACTION 'VLMOVE'.
ENDIF.
My probelm is how SAP knows what records i have selected?? any table is there to handle it..and how to post..LOOP AT IT_VEKP INTO WA_VEKP.
ex-exidv = wa_vekp-exidv.
append ex to exidv_g.
CLEAR ex.
flag = '' .
LOOP AT IT_VEPO INTO WA_VEPO WHERE venum = wa_vekp-venum.
AT FIRST .
IF FLAG = ''.
CLEAR : wa_move_to ,it_move_to .
IT_MOVE_TO-HUWBEVENT = HUEVENT."'0006'. "rec. event
IT_MOVE_TO-MATNR = WA_VEPO-MATNR." rec. matnr
IT_MOVE_TO-CHARG = WA_VEPO-CHARG."rec. batch
IT_MOVE_TO-WERKS = WA_VEPO-werks . " rec. plant
IT_MOVE_TO-LGORT = p_umlgo. " rec. storage location
IT_MOVE_TO-LGNUM = p_whsid."warehouse no.
IT_MOVE_TO-BWART = '311'."'311'."movement type
MOVE-CORRESPONDING it_move_to to wa_move_to.
ENDAT .
flag = 'X'.
ENDIF.
WA_HU_ITEMS-VENUM = wa_vekp-venum ."handling unit
WA_HU_ITEMS-VEPOS = wa_vepo-vepos ."item no.
append wa_hu_items TO wa_move_to-hu_items.
ENDLOOP .
APPEND wa_move_to to it_move_to_g.
CALL FUNCTION 'HU_CREATE_GOODS_MOVEMENT'
EXPORTING
IF_EVENT =
IF_SIMULATE = ' '
IF_COMMIT = ' '
IF_TCODE = 'VLMOVE'
IS_IMKPF =
IT_MOVE_TO = it_move_to_g
IT_INTERNAL_ID =
IT_EXTERNAL_ID = exidv_g
IMPORTING
EF_POSTED = EF_POSTED
ES_MESSAGE = ES_MESSAGE
ET_MESSAGES = ET_MESSAGES
ES_EMKPF = ES_EMKPF
CHANGING
CT_IMSEG =
IF ES_MESSAGE IS NOT INITIAL .
itab-exidv = wa_vekp-exidv .
APPEND ITAB .
CLEAR itab .
IF sy-subrc = 0 .
call function 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'.
ENDIF.
ENDIF.
REFRESH : it_move_to_g,exidv_g .
CLEAR : wa_vekp ,wa_vepo .
ENDLOOP .
Where VEKP and VEPO are handling unit header and item tables respectively. VEPO contains the material no. which is there in HU. You can use HU_CREATE_GOODS_MOVEMENT FM as specified to do VLMOVE in background.
Maybe you are looking for
-
Is there a way to format Safari text into a language other than American?
The other day I was mystified when the spell-checker in my Word 2011 word-processor seemed to go bananas. Despite all my language settings in Word being set to 'English (UK)', the spell-checker kept insisting on checking my document in 'English (US)'
-
Problem: HTTPS connections via authenticated proxy
Hi all, we are facing a problem with the BEA implementation of the HTTPS client/server protocol. As you might know it's possible to tunnel T3 via HTTP/HTTPS. We are evaluating that at the moment. To make authentication for proxy servers possible we f
-
Has anyone found a cure for the U052 print head error. it was factory installed.
It just quit doing anything. You would think i could still fax at least. Not a chance i will recommend Canon to anyone. this machine is less than two years old. The Re-Seat instructions are a joke.
-
Frozen iPhone - apple logo with black screen
My phone is frozen with the apple logo on the black screen. I have tried all the suggestions previously posted about holding the button while plugging in the USB...nothing works. It's FROZEN!! Can anyone help? I'm getting desperate.
-
How can I get rid of a split screen?
When I use my bookmarks I get the web site on the left side of the screen and fire fox opening page on the right side of the screen