VM-605

I really like my handsfree VM-605 speakerphone.   When I turn on my VM-605 speakerphone which is paired with my BB Bold 9700, I get asked each time do I accept the connection to the VM-605, and I always answer yes, and a comforting voice says "Connected".   However, there is also an option to check a box that says Do not ask this again. My questions are:
1. if I check the box, thereby eliminating the need to accept the connection each time, will the VM-605 automatically connect to my handheld?
2. If so why bother to accept the connection each time?   Any advantage to doing so?
3. If I chose the Do not ask this again option, will I know I am connected to the VM-605 because a light will flash intermittently in the upper right hand corner of the handheld, as it does now when I answer "yes" to whether I accept the connection?
4. Or can the automatic connection only be set up the first time after the device is paired with the handheld?
Thank you,
Macroom
Solved!
Go to Solution.

the checkbox setting concerns every time you connect the BlueTooth device with your Bold.
The advantage is in case of several phones, but one BlueTooth device. Sometimes you will want to connect it with one device and not the other, but in some cases the BlueTooth device is not able to connect to two phones at the same time.
In such cases, refusing on one side can be the only way for the othetr side to "grab" the BlueTooth device.
whenever the BT connection is made, there is the little BlueTooth logo with a dual arrow to its side like this : <|> . In addition to that logo, you can have the LED blink in blue.
This is true with the "accept connection each time" checked or unchecked.
I do not understand your fourth question. Obviously the pairing cannot be made automatic, it would mean any stranger could pair with your Bold without your knowledge. That is the reason why there is a 4-digit passcode.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Similar Messages

FI-CA version 605 : BRF Trace not triggered or displaying

Hello colleagues,
We are on FI-CA version 605, using BRF for Collections/Dunning (not BRFPlus).
In the Dunning proposal (FPVA), when I click on "Trace Active" and run dunning, I don`t see any BRF trace after the run is completed.
Supposedly in version 605, the Note 1289497 is not relevant, hence I don't have to implement the Trace logic in Events 315 and 1799.
I thought I would check with this group before logging an OSS Request.
Your insights would bre really appreciated.
Thanks and regrds,
Ivor M.

Hi Ivor,
The note 1289497 is not relevant for FI-CA 605. This note is relevant until 604.
BRF is a standard Tool for FI-CA 605 (by using the note 1466868 you can use BRF+ here. See also following SDN paper: http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b05dcf53-603f-2f10-1e84-f5f90974471e).
You can switch BRF trace in FPVA directly. The standard FKK* function modules for Events 0315 and 1799 should be implemented. You can see the BRF-trace in the dunning history (FPM3) than.
Best regards,
Tomas
SAP Development Support FI-CA

ECC 60 EHP5 with ECC-DIMP 605 Active

Hi,
I'm going to upgrade our SAP system from release 4.6C to ECC60 EHP5 with the procedure CU&UC.
I'm using a Sandbox system to do this and test the functionality, in source version 4.6C we have a IS-MP(Mill Solution) 46C1 SP12 and in the new versione ECC60 EHP5 it is in component ECC_DIMP ver 605 SP6 , but now I have more syntax error in system, for example migo transaction...
Error in the ABAP Application Program
The current ABAP program "????????????????????????????????????????" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "SAPLMIGO " in include "LMIGOK
" in
line 60:
"The data object "LS_RSEROB" does not have a component called "EBELN"."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "????????????????????????????????????????" had to be
terminated because it has
Please help me to fix this issue.
Regards.
Stefano Sospizio.

HI,
I am not sure but maybe SAPNET note 1629023 is helpful.
BR Christian

4.5.605 pushing....

My phone just came up and said it had the update for 4.5.605 available.....lets see what this may TRY and fix....or what little gremlins comes along with it.....maybe beyond the keyboard it'll actually fix the radio problem once and for all. One can hope....

keiffers wrote:
My phone just came up and said it had the update for 4.5.605 available.....lets see what this may TRY and fix....or what little gremlins comes along with it.....maybe beyond the keyboard it'll actually fix the radio problem once and for all. One can hope....
To be honest I am starting to wonder if its a radio issue because a number of devices have been having simular issues with connections as the Droid X has been having.. My reception on my Thunderbolt has been really becoming unpredictable, I lost my data all day yesterday and my phone jumps in 4g when I keep being told that we dont have it in my area...

Tcode S_ALR_87012301 Report RFSUSA00 after upg ecc 605 without page break

Hi !
This G/L account balances report (Tcode S_ALR_87012301 : Report RFSUSA00 ), in version 4.6C, have a page break by the subtotals level defined at the selection screen.
Now after the upgrade with ecc 605, the output is continuous...
I checked the possibilities of changing the output layout, but didn't find anything to define a pagebreak by the 3 levels at the selection screen....
Does anyone knows if there is a solution for this?
Thanks in advance.
Regards
CMira

Hi Experts,
After i tried a few times, i can successfully start prepare with upgrade asistant monitor - Administrator >> Start Prepare,
Thanks

SEM-BCS Enh 5.0 in SEM-BW 605 as per 1171344

any rumors on when a new version ([currently 7|https://service.sap.com/sap/support/notes/1171344]) is coming to the market?
looking at prior versions it should happen any time now.

HI Greg,
Are you trying to give us a clue on something about to happen?
I'm very interested in EHP5 and by co-incidence I just checked again today:
1171344 - last updated in July 2010, there is high level info on the two functions to be provided inside EHP5,
There is also a little information here: https://websmp109.sap-ag.de/erp-ehp
However, we are still lacking the low level details.
1120848 - Restricted usage of SEM-BW 7.00 or FINBASIS 7.00 last updated December 2007 confirms that SEM-BW 7 is and FINBASIS 7 are specifically for "Banking Services" and not to be confused with upgrades to SEM-BCS, which will be release 605, EHP5 for BCS.
NB By looking at some other OSS notes, I found this info on what looks like Support Pack (SP) 4 of SEM-BW 605:
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/spat/index.htm?sp1=SAPK-60504INSEMBW
There are 15 OSS notes in there for BCS specifically, so this suggests that some people are on release 605.
Thereafter a little fiddling with the address bar led me to the equivalent 60504 for FINBASIS, but there were no notes for BCS.
I worked backwards to here:
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/spat/index.htm?sp1=SAPK-60503INFINBASIS
There are two BCS notes here (drill down to FIN-FB-WB)
So, this suggests that EHP5 is already live at various ramp up sites, and SPs are being created to address issues
When will it be on general release is still my question
- have you got some insider knowledge to share?

SAP Best Practices for Chemicals V1.605

Hello,
I am planning to install SAP Best Practices for Chemicals India V1.605.
On site http://help.sap.com/bp-chem#section1 it mentions that SAP Best Practices for Chemicals India V1.605 is available.
However, I am not able to locate SAP Note "SAP Best Practices for Chemicals India V1.605" on http://service.sap.com/notes which will contain Quick Guide document and other important documents.
can someone help locating this note?
Regards.

To give more info:
I somehow figured out that probably note 1648098 is the required note.
However, note 1648098 has status "The requested SAP Note is either in reworking or is released internally only ".
Can someone verify whether this is correct note and tell me when will this note be available?
Regards.

Setting in BIOS to change RAM speed in an ATC-605?

Is there a way to enable or see the settings in the BIOS to alter RAM speed and timings? I know a lot of things are locked away compared to a normal built system, but is there a way to do this? Looking to see if I can enable XMP and up my RAM speed to its appropriate speeds.

Are you talking about the stock memory in your computer? Or you've added some different memory? I think the max it can do is the JEDEC standard for the motherboard which is DDR3-1600 CL11 (I think). Even if the BIOS did support XMP. I don't think it would do much good since you can't overclock the CPU. Neither the locked Haswell CPUs or H81E chipset support overclocking on the TC-605s. So wouldn't the performance gain would be tiny without the ability to overclock the CPU......? I was actually thinking about buying some 1600/1866 just for curiousity sake, but I get the feeling it would bump down to 1600 due to that JEDEC standard which is out of Acer's control. I have the i5 4440 which says it only supports 1600 max. http://ark.intel.com/products/75038/Intel-Core-i5-4440-Processor-6M-Cache-up-to-3_30-GHz I don't know though, I'm not an overclocker....so maybe somebody can give you a better answer. Anyway, the TC-605 is more of a mainstream desktop. Don't get me wrong, you can max it out to 16GB ram and...... At this point, I've added to one of my tc-605s...a SSD with the ram cache enabled, and added some additional ram. It's pretty quick. Now I just have to pull the trigger on that gtx 750ti-sc (if it will fit in the case) Edit: If you're using CPU-Z or Speccy, and you're using the ram that came with the tc-605, it should give a frequency of around 800 Mhz. Which would be 1600 since it's DDR=DoubleDataRate. I think when I checked it said something like 798.1 Mhz...which is close enough to 800 Mhz.

Steps to perform MT 605 with delivery number

Hello all
we have some stocks hanging in "stock in transit" for material.
these where getting moved from plant to plant.
i see a 603 Movement type done and from UNR of plant 1 to stock in transit of plant 2 has happened.
i guess to complete the steps we need to do 605 Movement type.
also, this particular item is not on any PO. it does have delivery number.
wherever i read, it just says do 605 in "SHIPPING".
but i am not able to find, how to really do this.
what transaction to use to do 605 in shipping?
i tried general ones, mb1b, searched in MIGO, but i didnt find any option
in Mb1b it gave me an error "Good movement not possible with this MT"
Basically i want to do GR without PO but with delivery may be, to take stocks away from "stocks in transit" column and move to appropriate column like UNR.
also if you can tell me what happens at FI ( accounting ) end, it would solve all my problems.
Thanks
Kavana

solved! used 305 MT. i guess 605 happens at back end.

Thunderbolt Notification/ringtone issue after 2.11.605.9 Update

I know that this latest update was supposed to fix the bug where the wrong ringtones were being played when a custom ringtone had been set; however, now I am seeing a different issue with ringtones/notification sounds. After receiving the update on 12/21, I have noticed that my ringtones and notifications sounds no longer stay set. I noticed it when my email notification sound started playing some mp3 that I had on my phone and as I was looking further, all of my contacts that I had given custom ring tones were now set to some other ringtone. I reset all of custom ringtones on my contacts and notifications sounds that I had noticed had changed. This morning....many of them were set to something else again. Including the gmail app notification sound (again). Is anyone else experiencing this issue.

Same issue as many have described above.
After update to 2.11.605.9 my custom ringtones and notifications change every time the device is power cycled. The vast majority of the time my txt notification sound is changed to "Facebook Pop" (which I don't actually remember being an option prior to the update to Gingerbread). That sound is nearly inaudible, not to mention it's not the custom notification sound I've selected, and contiune to select.
About 25% of the time after reboot the device selects an mp3 file saved on my phone, one that isn't even listed within my notification ringtone selections list. It's pretty bizarre, not to mention more than a little frustrating.
It makes no difference if the phone it just restarted, or shtudown completely and then started up once more - notification & ringtone selctions are not saved.

BRAIN 605 when calling Workload analysis in Solman 4.0 EHP1

Hello!
I am running an solution Manager system with release 4.0 EHP1 (brandnew).
I have the problem that some BI functionalities on the SMD do not work correctly.
´For example I am calling the following application:
E2E Analysis -> select a system -> klick on workload analysis -> chose the second tab Application Server ABAP. Here for example in the workload summary I get the folloing eror message:
Technical Information for Message:
The requested query 0CCMSMTPH/0CCMSMTPH_WA_Q0001_H does not exist on the current server
Notification Number BRAIN 605
Other queries like for example the User load are working. Does someone have an explanation? How can I check if the query really is not existing of if it has a problem?
Regards
Bernd

done- I had to run the report CCMSBI_SETUP_E2E, CCMSBISETUP is not enough

About implement problem by ISE 14.5 & SPARTAN SP-605

Hi, I want to implement the amber23 core(it is post on opencores.org and it was verificated) on Spartan 6, SP-605.
Therefore, I use the ISE 14.5 webpack version.
The user guide said it can be implemented. I implemented the amber23
and set the top module as 'system.v' and open all sources in the hw/vlog,
but the compile result is
INTERNAL_ERROR:Xst:cmain.c:3423:1.29 - Process will terminate. For technical support on this issue, please open a WebCase with this project attached at http://www.xilinx.com/support.
Therefore, search about this error, and change the process properties like
opt_mode, opt_level, keep-hierarchy, read_cores, use_dsp48, equivalent register removal,
-use_new_parser yes ...
but it doesn't work...
and remove related with the ddr3.v, because I don't need it and there's no file about ddr3.v in amber prj, but the error was not dissapear...
Please help me to implement the prj
or if you have the ISE project file that you already done by the a23 core, please talk to me
Thank you

Uhm,
opencores can be great for sources, but the bigger designs can be a big step if they work first time.
IN fact just like most IP I have ever purchased, its just wth IP u pay for at least you can shout at some one, it still might not get the IP working, but hey.
So this looks like a pure Xiiinx error report, being reported in the Xilinx Xst:cmain.c
but that does not mean ints a xilinx bug, it just means the tools did not understand something in the source code, and bombed out with a not very usefull error message.
welcome to the fun.
So if the tool does not give you an clue, nore the IP, then its down to divide and conquore .
I assume the project is made up of many smaller files, with one as top, and you have a fair undrstanding of the RTL process.
So , try start cutting the project up, by making various second level files 'top', and re compiling .
that should enable you to localise where the problme is.
Have fun,

Error while implementing SAP All in One Retail Package Release V1.605,

Hi All,
While activating the building blocs of SAP All in one Best practices for Retail, Version Release V1.605. We are getting the following error:
1. The add on release installed in ur system is not upto date.
2. A newer version is available, install the latest add-on as described below to avoid issues during the activation of SAP Best Practices version.
Please help.

Hi Gaurav!
I run the command from Note 1576955
$(DIR_PUT)/exe/tp -V 2>&1 and got the result:
I can't see any stdout errors there.
I copied files from
$(DIR_PUT)/bin/libicu* to SYS and DVEBMGS00 according of note 1576955 :
cp /tmp/SUM/SUM/abap/exe/libicu* /usr/sap/EW1/SYS/exe/run/
cp /tmp/SUM/SUM/abap/exe/libicu* /usr/sap/EW1/DVEBMGS00/exe/
But it didn't help.

BUPA_MAIN BDOC Error AM 605 - Assignment of usage & to communication type &

Hi Experts,
In our ISU to CRM replication of the Business partner we are seeing lots of BDOC error AM 605 - Assignment of usage & to communication type & not unique.
I have figured that the error occurs when the CONSNUMBER in the ADR* table reaches 999. Therefore, no more entries can be added for the communication type (ie another phone number) for that particular address number.
But the behaviour in our case is such that CONSNUMBER is reaching 999 by skiping many numbers ( i am not sure if thsi is the standard behavior or something is wrong), so its not the consistent behaviour. In some cases it suddely skips the CONSNUMBER range say which is at 400 for particular address number and goes to 990 range and reaches 999, the BDOC errors out.
We applied note 1070798 - Repair the consnumber in communication tables. The program Z_OSSNOTE_1070798 will be run to reorganize the consnumber, so no entry is at 999. Although this reorganies the number but this only acts as a fix after the error is already encountered.
We still see the AM 605 error , can any one please suggest is there any way to avoid this BDOC Error from occuring. We see these error in case of organisation BPs having many addresses and their phone number in table ADR2 CONSNUMBER reaches 999.
Immediate help is greatly appreciated.
Thanks,
Jessica

Hi Jessica,
Were you able to fix this issue of fill all required entries error?
i have a same error with my project too.
Yes, you know me. We worked in the same project earlier, now i am in this new project, where i get the same old error.
Thanks
Keerthi

Movement 605

Has anybody used movement type 605? I already did 603 via outbound delivery goods issue (VL02N).. I would like to know how I could receive the stocks on the other plant.. what tcode to use for movement 605? I tried MIGO GR with reference to outbound delivery, but system will not accept.

Try using movement type 305 instead in t.code MIGO. Check this thread in which already the same issue is discussed;
Re: 605 movement type
If the delivery is related to replenishment delivery, then you may check whether OSS Note 532631 - Incorrect GR mvt type for replenishmt delivery additnl items applies to your sceanrio.
Regards,

Movement type 605

Has anybody used movement type 605? I already did 603 via outbound delivery goods issue (VL02N).. I would like to know how I could receive the stocks on the other plant.. what tcode to use for movement 605? I tried MIGO GR with reference to outbound delivery, but system will not accept.

Hi Ramesh,
I tried to do MIGO Goods Receipt with reference to both Outbound and PO, but the system does not accept. I am receiving the error message below:
"Movement type 605 is not planned for this operation".
I checked the configuration it is assigned to MIGO tcode..
This is standard movement type, should there be additional config for this one?

VM-605

Similar Messages

Maybe you are looking for