VM Box config for Windows 7

When setting up VM Box for a Windows 7 install, do I select Vista or Other Windows?

Thank you for the link, yet I'm still stuck.
I'm not sure that the guest additions installation was successful as after reboot, Windows crashed.
Windows freezes on start up now. Occasionally it will successfully boot. When it did so I changed the screen resolution which makes the window a bit bigger and better looking, but I'm not sure I couldn't have done this before - I don't know because I didn't try it prior to the guest additions install.
What should be different following a guest additions install? How do I know if the installation why successful?
Also, my sound doesn't work on Windows. No device is installed. I have my settings identical to the settings referenced in the link you shared.

Similar Messages

  • OCS Single-box installation for windows??

    hi.
    do i have to install Oracle9i Database, before i install OCS single-box for windows?
    any one have any idea?

    No, You don't need oracle 9i DB installed in Single Box, Once you start Single Box installation, you will be prompted to create a DB for Files/Email and other 9i DB will be created for IAS.

  • X-box receiver for Windows won't connect to controller

    Hello,
    I have recently restored my computer, and before that point my wireless xbox controller connected to the PC fine via the Official Microsoft receiver. After the restore, I reinstalled the drivers for the receiver and when plugged in the light on the receiver
    didn't light up. I did some research prior to posting this to see if I could find a solution, and I got it to light up by doing the following:
    1.Right click on Computer
    2.Go to Properties
    3.Click on Device Manager
    4.Right click on the Unidentified Device
    5.Go to Properties
    6.Go to the Drive tab
    7.Click on "Update Driver"
    8.Browse my computer for driver software
    9.Let me pick from a list of device drivers on my computer
    10.Microsoft Common Controller for Window Class
    11."Xbox 360 Wireless Receiver for Windows"
    12.Update Driver Warning
    13.Click Yes
    I heard by doing the above, it cured the problem for others, but it didn't work for me. Now, when I try to hook up my controller, I hold the large X in the middle of the controller, and all four quarters blink. I hold down the sync button on the receiver,
    then the controller, and the receiver blinks, and the controller does its swirling connecting thing. The receiver then stops flashing and goes back to being static, and the controller resumes the four quarters blinking. Normally, the top left quarter should
    stay lit and the connection would be successful, but it isn't doing that for some reason. Anyone know how to get them to complete the process of syncing?
    Thanks,
     - Nathan

    bump.

  • Server box config for logging in

    I have two arch boxes, one server one desktop on home network with router. I have SSH and VNC working great and all between them, but I'm wondering how to set up the server so that I don't have to login. Basically if the power goes out and it turns back on, it boots and goes straight in as my user. I'm the only one w/access to both boxes so unless it's bad for another reason I'd like to do it this way. The server runs a plain fluxbox session, I currently use GDM on the server because I just never bothered to take it off and set this method up hehe. Oh and I know of the option in GDM setup to enable automatc login, but wondering if I can skip GDM altogether to make it quicker.
    Thanks for help with this
    Last edited by colbert (2008-09-05 06:22:04)

    SiC wrote:Hmm... I run X11 forwarding over my network without compression and it works fine. I just ssh into the box and windows appear near instantly.  I'm running it over 802.11g too so, not even ethernet.
    Yeah same, I run it tunneled over the internet from home to work all the time, I just set TightVNC to low bandwidth and its very snappy.
    Edit:
    Home: Comcast 10mbit down/1mbit up
    Work: DSL ~2-4mbit down/??
    Last edited by Ruckus (2008-09-08 07:46:00)

  • Open and read from text file into a text box for Windows Store

    I wish to open and read from a text file into a text box in C# for the Windows Store using VS Express 2012 for Windows 8.
    Can anyone point me to sample code and tutorials specifically for Windows Store using C#.
    Is it possible to add a Text file in Windows Store. This option only seems to be available in Visual C#.
    Thanks
    Wendel

    This is a simple sample for Read/Load Text file from IsolateStorage and Read file from InstalledLocation (this folder only can be read)
    using System;
    using System.Collections.Generic;
    using System.Linq;
    using System.Text;
    using System.Threading.Tasks;
    using Windows.Storage;
    using System.IO;
    namespace TextFileDemo
    public class TextFileHelper
    async public static Task<bool> SaveTextFileToIsolateStorageAsync(string filename, string data)
    byte[] fileBytes = System.Text.Encoding.UTF8.GetBytes(data);
    StorageFolder local = Windows.Storage.ApplicationData.Current.LocalFolder;
    var file = await local.CreateFileAsync(filename, CreationCollisionOption.ReplaceExisting);
    try
    using (var s = await file.OpenStreamForWriteAsync())
    s.Write(fileBytes, 0, fileBytes.Length);
    return true;
    catch
    return false;
    async public static Task<string> LoadTextFileFormIsolateStorageAsync(string filename)
    StorageFolder local = Windows.Storage.ApplicationData.Current.LocalFolder;
    string returnvalue = string.Empty;
    try
    var file = await local.OpenStreamForReadAsync(filename);
    using (StreamReader streamReader = new StreamReader(file))
    returnvalue = streamReader.ReadToEnd();
    catch (Exception ex)
    // do somthing when exception
    return returnvalue;
    async public static Task<string> LoadTextFileFormInstalledLocationAsync(string filename)
    StorageFolder local = Windows.ApplicationModel.Package.Current.InstalledLocation;
    string returnvalue = string.Empty;
    try
    var file = await local.OpenStreamForReadAsync(filename);
    using (StreamReader streamReader = new StreamReader(file))
    returnvalue = streamReader.ReadToEnd();
    catch (Exception ex)
    // do somthing when exception
    return returnvalue;
    show how to use it as below
    async private void Button_Click(object sender, RoutedEventArgs e)
    string txt =await TextFileHelper.LoadTextFileFormInstalledLocationAsync("TextFile1.txt");
    Debug.WriteLine(txt);
    在現實生活中，你和誰在一起的確很重要，甚至能改變你的成長軌跡，決定你的人生成敗。 和什麼樣的人在一起，就會有什麼樣的人生。 和勤奮的人在一起，你不會懶惰； 和積極的人在一起，你不會消沈； 與智者同行，你會不同凡響； 與高人為伍，你能登上巔峰。

  • Jabber for windows 9.2.1 - InitialPhoneSelection doesn't work if configuration is in custom config file

    Hi,
    my customer wanted set InitialPhoneSelection to deskphone mode, when users firs run Jabber for Windows (ver. 9.2.1).
    I created custom config (configurationfile=jabber-config-deskphone.xml) but it doesn't work.
    Policies>
         <InitialPhoneSelection>deskphone</InitialPhoneSelection>
    </Policies>
    I tested it couple times and at the end I tried put configuration to default jabber-config.xml and ... this functionality start working...
    Could you check guys if you have same problem with custom config file? I think that it is bug. Maybe other option don't work in custom config file.
    Thanks a lot
    Pavel

    Hi Pavel,
    This setting is only when the client is installed and started by the user for the first time. After that the client will save the user preference (what was the phone selection when the user exited the client)  and use it in subsequent logins.
    Having said that, can you please specify in details how exactly you did your tests or maybe test again taking the above into consideration ?
    Thanks,
    Christos

  • I have Adobe Photoshop Elements 8 for Windows 7. I need to re-install it because my computer crashed. I saved the outer box, but I do not see a serial number and it is asking for it when I am trying to install the CD software. I went online, but the only

    I have Adobe Photoshop Elements 8 for Windows 7. I need to re-install it because my computer crashed. I saved the outer box, but I do not see a serial number and it is asking for it when I am trying to install the CD software. I went online, but the only serial number I see is when I registered the Photoshop Elements 2.0.

    The serial number will be on the disc case, not the outer box.  Find your serial number quickly

  • I just bought a adobe photoshop elements 12 for windows in the store , why the serial number on the box is invalid ?

    i just bought a adobe photoshop elements 12 for windows in the store , why the serial number on the box is invalid ?

    Hi,
    Does your serial number have 24 digits starting with 1057?
    Note: Please don't quote your number as this is a public forum
    If your number is not like that it may be a redemption code. See if the following helps.
    http://helpx.adobe.com/x-productkb/global/redemption-code-help.html
    If you need help in finding a serial number inside the box, please see here
    http://helpx.adobe.com/x-productkb/global/find-serial-number.html
    If you still need help, then you will have to contact Adobe. Look at the end of the page I first gave and you should see "Still need help" - click on that.
    Good luck
    Brian

  • Missing Camera Raw Dialog Box in Photoshop Elements 8 for Windows.

    Hello,
    I have Photoshop Elements 8 for Windows. This runs on a 32-bit Windows Vista VirtualBox virtual machine.
    It has been running fine, but suddenly opening raw Nikon images no longer opens the Camera Raw Dialog box, but takes me straight into editing on Photoshop Elements.
    I really like having the Camera Raw Dialog box open as I do most of my image processing using this before opening the resulting file in Elements.
    Does anyone know how to get this box back, or to open it from within Elements?
    I have tried opening the images from within Photoshop Elements using the "Open As..." mnu item from the File menu, and the selecting "Camera Raw" as the image type, but it still opens without the Camera Raw Dialog box.
    Thanks very much.

    Check your screen resolution settings for vista.
    I believe the screen resolution needs to be at least 1024 x 768 for the camera raw dialog to show in pse 8.
    For example, if instead of running VirtualBox full screen, your running it in windowed or seamless mode and made the window smaller by dragging on the corner, that would automatically lessen the screen resolution in vista.

  • Delete proxy config on Cisco Secure ACS 4.1 for Windows ?

    We have a pair of ACS 4.1 servers (Windows Server 2003 R2). Let's call them ACS1 and ACS2.
    We don't want either one of them to proxy to any AAA server, including each other. We're using mostly TACACS authentication.
    While troubleshooting a general problem, I'm guessing that one of us did this on ACS1:
    pressed the Network Configuration button,
    saw the Proxy Distribution Table
    clicked (Default)
    moved ACS1 from the AAA Servers column to the Forward To column.
    So, essentially, we're telling ACS1 to proxy all requests to itself, which doesn't seem to make sense. I don't know for sure whether it should work when configured to "self proxy," but in that state, it does not authenticate anyone and gives merely "Internal error" as the reason.
    If I change the configuration so that "ACS2" appears in the Forward To column, and I move "ACS1" back to AAA Servers and restart, ACS1 starts responding correctly to TACACS requests. Of course, ACS1 is just proxying all requests to ACS2, so having two servers isn't doing much good.
    I cannot simply remove ACS1 from the Forward To column and leave it empty. The interface complains that it can't forward to zero servers. Of course, on ACS2, there are no servers in the Forward To column, since we never touched the Proxy Distribution Table there.
    Is there any way to return the Proxy Distribution Table to its default setup, that is, no servers appear in the "Forward To" column?
    We're planning to upgrade to version 4.2 very soon, so this question is mostly academic, unless the same problem exists in 4.2.
    For full disclosure, I should mention that the problem we were troubleshooting was loss of connectivity to our Windows Domain Controllers from our ACS servers. We had missed adding some exceptions in our firewalls to allow for four new DCs. As far as we can tell from testing, connectivity to the DCs is now fine. The firewall rules group ACS1 and ACS2 together, so connectivity should be the same, and ACS2 authenticates users correctly.

    Hello Jeffrey,
    By default the ACS 4.x Proxy Distribution Settings should have the ACS entry for itself on the Forward To box. Your ACS1 entry should be on the Forward To box.
    The Internal Error message on the ACS should be highligthing a different issue on your ACS1. Also, the message stating that we cannot have zero servers on the "Forward To" box is expected.
    Set your ACS1 for Full Logging Detail (System Configuration > Service Control) and configure the ACS1 entry under the Forward To box. Recreate the authentication issue and collect a package.cab file. If you have an ACS for Windows, under the ACS Installation folder look for the CSAuth folder > Logs and share the auth.log file with a failure timestamp for us to review the ACS logs when failing with Internal Error.
    If this was helpful please rate.
    Regards.

  • Is my boxed Photoshop CS6 for Windows good for Mac as well?

    I have boxed version of Photoshop CS6 for Windows. I am switching from PC to Mac. How can I install Photoshop on Mac? Do I need to buy a Mac version? Thanks.

    No.  You have to call up and do a platform swap:
    http://helpx.adobe.com/x-productkb/policy-pricing/order-product-platform-language-swap.htm l

  • When I try to download the Itunes for windows, I have received always the same text box: Itunessetup.exe is not a win32 valid? what does it mean, please?

    When I try to download the Itunes for windows, I have received always the same text box: Itunessetup.exe is not a win32 valid? what does it mean, please? What can I do to solve it?

    In the course of your troubleshooting to date have you worked through the following document?
    iTunes: Windows reports that "iTunesSetup.exe is not a valid Win32 application"

  • When OCS R2 single box for Windows?

    I see the single box OCS R2 for Linux, but when will a single box version of R2 be available for windows?
    thx Curt

    I have been seen admin guide for ocs, but still can not install this product by its description !
    I download Collaboration Suite single box for WinNT from OTN site, I got three ZIP file and extract into a same new directory c:\ocs, then I got these directory :
    c:\OCS\DISK1\
    c:\OCS\storage\DISK1
    , I first run c:\ocs\disk1\install\win32\setup.exe but got java run time environment not found error message !
    then I try c:\OCS\storage\DISK1\setup.exe to install storage, but must input infrastructure information in this progress(I still not install infra yet).
    so, what is the correct step to install this single box OCS ?

  • HT203296 Does  virtualization  box work for mac os 10.7 Leopold/ lion & windows

    Does  virtualization  virtual box work for mac os 10.7 Leopold/ lion & windo

    I am grateful to my google search using "how to run windows-7 bootcamp in virtualbox"    .  After spending hours of trial & error on Apple, VirtualBox, Youtube & other forums by chance I hit correct words and first in the search list was most useful. It gave simpler and easier instructions than others. Guidance is in easy steps and it works great.
    https://kindlevsmac.wordpress.com/2011/10/14/how-to-run-windows-7-bootcamp-in-vi rtualbox
    san00077 wrote:
    Does  virtualization  virtual box work for mac os 10.7 Leopold/ lion & windo

  • On Itunes for Windows 7, when I click the check mark box, the song is quickly deleted and sent to the recycle box. How do I go back to when I click on the check mark box, the checkmark is either turned on or off?

    On Itunes for Windows 7, when I click the check mark box, the song is quickly deleted and sent to the recycle box. How do I go back to when I click on the check mark box, the checkmark is either turned on or off?

    Thanks for replying, but I tried that earlier and had that did not work. After your reply I did it again, shutdown itunes and rebooted system. I thought since it didn't do that earlier that might work but same results it deleted file from Itunes but no second questions to move to recycle bin.

Maybe you are looking for